REPAIR MAINT REPLACEMENT OF STREET LIGHTS AND CONNECTED MISC ITEMS AT AF STN MOTHALA

Amount

Dismantiling / taking down T-5 light fitting 4 x 24 watts / LED 65/70W street light / security lights of any capacity & description from exising LT pole/walls, at any height and refixing the fittings in existing / another location after repair work or carrying to MES store and all as directed. Note for item No. 01 above:- (i) Replacement of defective parts accessories shall be measured and paid separately under relevant item of BOQ (ii) Transport and T & P i.e. Ladder, spanners or any other equipment for repair of street light shall be provided by Contractor and cost for the same deemed to be included in respective item of BOQ.

Supply & fix in repair Electronic ballast 24 watt for T5 lamps 2 x 24 watts complete all as specified & as directed.

Supply and fix in repairs T5 Flurescent lamp1 x 24 watts complete all as specified and as directed.

M & L for street light brackets made of 40 mm dia G.I. Pipe light grade in shape and angle as directed not exceeding 1.5 mtrs in length fixed to pole with suitable size of M.S. clamps made of M.S flat of size 40 mm x 3 mm, 2 Nos, M.S nut & bolt with cup washers and dismantling old rusted/unserviceable bracket with its rusted clamps and nut bolts complete all as specified & as directed.

S&F in replacement Street light timer analog clock type with suitable for connection with three phase supply and connected to existing contact for cotntroling complete all as specified and as directed.

Supply and fix in repair 1100 volts grade PVC insulated PVC sheathed cable weather proof multisranded/ solid aluminium conductor 3 core 4.0 sqmm from junction box to connector of fitting complete all as specified and as directed.

Supply and fixing in repair MCCB 4 pole 'C' curve 160 Amps, 415 Volts AC, 25 kA in existing street light panel and connection with bus bar out going cable with copper wire with MCCBs complete all as specified and as directed.

Description all as per Srl Item No. 7.00 of BOQ here-in-before but MCCB 4 pole 'C' curve 100 Amps, 415 Volts AC, 25 kA

Description all as per Srl Item No. 7.00 of BOQ here-in-before but MCCB 4 pole 'C' curve 63 Amps, 415 Volts AC, 25 kA

Description all as per Srl Item No. 7.00 of BOQ here-in-before but MCB 4 pole 'C' curve 32 Amps, 415 Volts AC, 10 kA

Supply and fix in repair existing Street light panel and connection with bus bar out going cable with copper wire with power contactors 3 phae, 415 V, 40 Amps, complete all as specified and as directed.

S&F in replacement LED street light minimum of 40 W IP 65 protected, Powder coated pressure die cast aluminium High Power LED Street light with heat resistant toughened glass complete all as specified and as directed.

S&F in repair SMC based outdoor type Junction box pole Hinged (L) mounted with clamps and including MCB SP06 Amps complete all as specified and as directed.

M&L for painting of street light poles including scraping of old painted surface and applying two coats silver colour aluminium paint including in all nuts bolts & street light brackets etc complete all as specified & directed.

Supply & Fix in replacemet 100 Watt fittings High efficiency long life CREE LED chip in modules of 40/72/100W each (6x5 array) with Ra>75 and lumen efficacy of >95 lum/watt or equivalent suitable forsuitable for LED light fitting of 40/72/100 watt complete all as specified and as directed.

Description all as per Srl Item No. 15.00 of BOQ here-in-before but 72 Watt fittings

Description all as per Srl Item No. 15.00 of BOQ here-in-before but 40 Watt fittings

Supply & Fix in replacement of Metal halide (MH) lamp suitable for 250 watts metal halide fittings, screw type complete all as specified and as directed.

Supply only Ballast suitable for 250 Metal halide (MH) flood light fitting complete all as specified and as directed.

Supply only holder edison screw type for 250 watts MH flood light fitting complete all as specified and directed.

Supply only ignitor, super imposed ignitor for metal halide fitting 250 W complete all as specified and as directed.

Supply and fix in replacement LED street light fitting driver suitable for exisiting make and model of rating 40 Watt complete all as specified and as directed.

Supply and fix in repair Aviation light at a hight and location given, of Red colour 230 V AC complete all as specifed and directed.

Supply and fix in replacement LED street light fitting driver suitable for exisiting make and model of rating 60 W to 72 Watt complete all as specified and as directed.

Supply & fix in replacement of LED Post top of 25 Watt Integral pole mounted decorative LED with IP-65 protection complete fixed on existing post complete all as specified and as directed.

S & F in replacement LED flood light luminire of 120 W IP 65 protected, Powder coated pressure die cast aluminium High Power LED flood light with heat resistant toughened glass complete all as specified and as directed.

Krishna Engineering

Venus Engineering