Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC HAVELI FALIYA NALIYA KUTCH 370 655 | KACHCHH | GUJARAT | 370655 | ₹37.8 L Quoted ₹39.9 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹42.8 LRejected-Finance HOUSE NO 120 1 NEAR HANUMAN MANDIR AT POST SHEL PIMPALGAON TAL KHED DIST PUNE PIN 411014 | PUNE | MAHARASHTRA | 411014 | ₹42.8 L | L2 | Rejected-Finance Due to not Lowest |
| 3 | L3₹44.5 LRejected-Finance OFFICE 4 B JAY TENAMENT MADHUWAN PARK II BEHIND NIRMAL NAGAR RAMESHWAR NAGAR JAMNAGAR 361006 | JAMNAGAR | GUJARAT | 361006 | ₹44.5 L | L3 | Rejected-Finance Due to not Lowest |
| 4 | L4₹45.4 LRejected-Finance GEETA COTTAGE NO 3 HOUSE NO 11 OPP CIVIL AIR PORT BHUJ KUTCH 370001 | KACHCHH | GUJARAT | 370001 | ₹45.4 L | L4 | Rejected-Finance Due to not Lowest |
| 5 | L5₹48.4 LRejected-Finance 501 SHANTI RESIDENCY II KRUSHNA NAGAR NR NARDAI BRAHM SAMAJ JAMNAGAR 361 006 | JAMNAGAR | GUJARAT | 361006 | ₹48.4 L | L5 | Rejected-Finance Due to not Lowest |
| Sl No | Description | Qty | Unit | TAKHUBHA KANUBHA JADEJA L7 | GEE CEE ENTERPRISES L1 | M/s. Shree Shakti Enterprise L6 | Vijay Construction Co L5 | AARTI ENTERPRISES L4 | NILESH SUBHASH KARALE L2 | NAVIN K LAKHANI L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for servicing, testing of DG sets by technician /mechanic of authorised DG set workshop to the installations of DG sets of capacity upto 5 KVA to 30 KVA at various locations of air force station Naliya. Checking and testing complete DG sets on load (Including engine, alternator, AMF panel, Body & chases complete) for its proper functioning and making a list of repairs/replacements required to be carried out in different parts of the DG sets. Carrying out general servicing and minor repairs and/or replacements complete all as directed for following jobs:-
(i) Checking and cleaning of diesel filters & oil filters, checking only engine oil level and intimating the quantity of oil required for topping, oiling & greasing of engine, alternator battery incl tightening of nuts, bolts, lugs etc
(ii) Checking and servicing of self starter, AMF panel including replacement/ tightening of nuts, bolts, lugs and other such minor works oiling & greasing, servicing of various parts of DG set such as timer, contactors, meters, etc.
(iii) Checking, cleaning and adjusting fan belt tension and cleaning & general servicing of exhaust/ silencer including checking for leakage of smoke & rectify.
(iv) Checking, cleaning and tightening of electrical connections & cleaning of AVM pads, tightening / replacement of nuts, bolts, & washers.Checking & tightning of battery terminals and connections also topping up/complete replacement of battery Electrolyte if required.Battery Electrolyte cost is included in above rate.
(v) Checking output of alternator and adjusting the same to specified values.
Note:-
(a) Rates quoted by the tenderer are also deemed to include the cost of S&F in replacement of minors parts like nuts bolts washers lugs supply and applying oil & greasing and minor repairs to DG set. (b) Servicing report of repairs/replacements carried out prepared by OEM will be submitted by contractor to the Engineer in charge for verification. (c) During servicing any new item required to fix will be intimated to Engr-in-Charge and measured and paid under relevant item. | 5 | Each Job | 29,000 ₹1.4 L | 2,500 ₹12,500 | 3,000 ₹15,000 | 2,700 ₹13,500 | 2,780 ₹13,900 | 2,400 ₹12,000 | 2,600 ₹13,000 |
| 2.00 | All as per serial item number 1.00 here-in-before but capacity 40 KVA to 62.5 KVA | 16 | Each | 3,600 ₹57,600 | 3,000 ₹48,000 | 3,500 ₹56,000 | 3,200 ₹51,200 | 3,500 ₹56,000 | 3,100 ₹49,600 | 2,900 ₹46,400 |
| 3.00 | All as per serial item number 1.00 here-in-before but capacity 75 KVA to 100 KVA | 6 | Each | 4,300 ₹25,800 | 3,500 ₹21,000 | 4,500 ₹27,000 | 4,000 ₹24,000 | 4,200 ₹25,200 | 3,400 ₹20,400 | 4,000 ₹24,000 |
| 4.00 | All as per serial item number 1.00 here-in-before but capacity 125 KVA to 250 KVA | 9 | Each | 6,200 ₹55,800 | 5,000 ₹45,000 | 6,200 ₹55,800 | 5,800 ₹52,200 | 6,200 ₹55,800 | 5,500 ₹49,500 | 6,000 ₹54,000 |
| 5.00 | All as per serial item number 1.00 here-in-before but including replacement of primary & secondary Air Filters for capacity 400/500 KVA | 3 | Each | 4,700 ₹14,100 | 45,000 ₹1.4 L | 52,000 ₹1.6 L | 55,000 ₹1.6 L | 46,500 ₹1.4 L | 47,000 ₹1.4 L | 46,000 ₹1.4 L |
| 6.00 | Material and labour for preparing old painted surface of DG sets of capacity 5 KVA to 30 KVA (complete including engine, alternator, body & chases including its outer canopy) by thoroughly cleaning the surfaces to remove dirt, dust, rust flakes and paint flakes, using wire brush or sand papers, damp cloth or as directed. Priming the surface with anti corrosive primers using suitable sprayers. Applying automotive paint using sprayers till glossy finish is obtained, complete all as per manufacturers instructions and as directed by Engineer-in-charge.
Make of paint: Nerolac / Asian / Berger or as approved by GE. | 1 | Each | 4,500 ₹4,500 | 4,000 ₹4,000 | 3,500 ₹3,500 | 5,500 ₹5,500 | 3,900 ₹3,900 | 3,700 ₹3,700 | 4,000 ₹4,000 |
| 7.00 | All as per serial item number 6.00 here-in-before but capacity 40 KVA to 62.5 KVA | 1 | Each | 4,600 ₹4,600 | 4,000 ₹4,000 | 4,000 ₹4,000 | 4,500 ₹4,500 | 3,950 ₹3,950 | 4,200 ₹4,200 | 3,900 ₹3,900 |
| 8.00 | All as per serial item number 6.00 here-in-before but capacity 75 KVA to 100 KVA | 1 | Each | 5,200 ₹5,200 | 5,000 ₹5,000 | 5,000 ₹5,000 | 5,100 ₹5,100 | 5,100 ₹5,100 | 5,500 ₹5,500 | 5,200 ₹5,200 |
| 9.00 | All as per serial item number 6.00 here-in-before but capacity 125 KVA to 250 KVA | 1 | Each | 6,000 ₹6,000 | 6,000 ₹6,000 | 6,000 ₹6,000 | 6,100 ₹6,100 | 5,900 ₹5,900 | 6,200 ₹6,200 | 6,350 ₹6,350 |
| 10.00 | Supply and fix in repairs Lead Acid batteries (VRLA/PLT) for DG Sets(DC power supply) of 88-90Ah,12 volt of make Exide/Amaron or equivalent make as approved by GE. | 8 | Each | 17,500 ₹1.4 L | 14,800 ₹1.2 L | 16,500 ₹1.3 L | 17,200 ₹1.4 L | 16,000 ₹1.3 L | 15,000 ₹1.2 L | 15,685 ₹1.3 L |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
29 Nov 2025, 6:00 pmClosed
Garrison Engineer (AF) Naliya No. 1
GE AIR FORCE STATION NALIYA NO 01
COMPREHENSIVE REPAIR/MAINTENANCE OF DG SETS, CHANGE OVER SWITCHES, AMF PANELS AND CONNECTED ITEMS AT AF STN NALIYA
2025_MES_739017_1
8088/E8
Open Tender
Electrical and Maintenance Works
270 days
Air Force Station Naliya
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE(AF) Naliya No. 1
₹70,000
Yes
25 Apr 2026
8 Nov 2025
1 Dec 2025
8 Nov 2025
29 Nov 2025
22 Nov 2025
Material and labour for servicing, testing of DG sets by technician /mechanic of authorised DG set workshop to the installations of DG sets of capacity upto 5 KVA to 30 KVA at various locations of air force station Naliya. Checking and testing complete DG sets on load (Including engine, alternator, AMF panel, Body & chases complete) for its proper functioning and making a list of repairs/replacements required to be carried out in different parts of the DG sets. Carrying out general servicing and minor repairs and/or replacements complete all as directed for following jobs:- (i) Checking and cleaning of diesel filters & oil filters, checking only engine oil level and intimating the quantity of oil required for topping, oiling & greasing of engine, alternator battery incl tightening of nuts, bolts, lugs etc (ii) Checking and servicing of self starter, AMF panel including replacement/ tightening of nuts, bolts, lugs and other such minor works oiling & greasing, servicing of various parts of DG set such as timer, contactors, meters, etc. (iii) Checking, cleaning and adjusting fan belt tension and cleaning & general servicing of exhaust/ silencer including checking for leakage of smoke & rectify. (iv) Checking, cleaning and tightening of electrical connections & cleaning of AVM pads, tightening / replacement of nuts, bolts, & washers.Checking & tightning of battery terminals and connections also topping up/complete replacement of battery Electrolyte if required.Battery Electrolyte cost is included in above rate. (v) Checking output of alternator and adjusting the same to specified values. Note:- (a) Rates quoted by the tenderer are also deemed to include the cost of S&F in replacement of minors parts like nuts bolts washers lugs supply and applying oil & greasing and minor repairs to DG set. (b) Servicing report of repairs/replacements carried out prepared by OEM will be submitted by contractor to the Engineer in charge for verification. (c) During servicing any new item required to fix will be intimated to Engr-in-Charge and measured and paid under relevant item.
Supply only in replacement/topping up of Engine Oil multigrade (20 W 40) in engine oil tank of DG sets all as specified and directed Make: IOCL/BPCL/HP or as approved by GE.
Supply only in replacement/topping up of Engine Oil multigrade (15 W 40) in engine oil tank of DG sets all as specified and directed Make: IOCL/BPCL/HP/Volvoline or as approved by GE.
Supply only Pre mix Coolant for DG Set as replacement or as topping up in radiator of various capacities complete all as specified and directed.
All as per serial item number 101.00 here-in-before but capacity 40 KVA to 62.5 KVA
Material and labour for repairing to alternator complete overhauling & servicing of the alternator 3 phase 4 wire 420 Volts AC Alternator coupled with prime mover, dismantling from prime mover and transporting to workshop for rewinding incl repair/ replacement of unserviceable parts, rewinding and assembling complete and testing fo
All as per serial item number 98.00 here-in-before but capacity 100A, 4 pole Make: Havells cat No.IHLGSF00100 or equivalent make from HPL/ Schneider/ L& T
All as per serial item number 98.00 here-in-before but capacity 160A, 4 pole Make: Havells cat No.IHLGSF00160 or equivalent make from HPL/ Schneider/ L& T
All as per serial item number 101.00 here-in-before but capacity 75 KVA to 125 KVA
All as per serial item number 101.00 here-in-before but capacity 140 KVA to 200 KVA
Labour charges for complete checking of AMF control panel on DG sets or separate on site, finding the fault, servicing complete including replacement of unserviceable minor spares and testing complete for manual & Auto operations all as directed. Note: Supply only of new items required for replacement will be measured & paid separately under respective item of schedule.
Supply and install, testing off load type changeover switch of capacity 100 Amps 4 pole ,AC 415 volts 50 HZ with enclosure, side handle operated conforming to IS:13947 incl fixing on wall/panel complete all as specified and directed by EIC. Make: C&S/IndoAsian/Havells/HPL
All as per serial item number 101.00 here-in-before but capacity 250 KVA to 500 KVA
Supply and fix in repairs manual ON-Load changeover switch 200A/415V/4 pole in SS Enclosure, Havells cat no IHCCFE0200 or equivalent including taking out LT cables from old location, refixing in proper phase sequence through lugs/taping etc complete all as specified and directed
All as per serial item number 107.00 here-in-before but of capacity 200 Amps 4 pole
All as per serial item number 109.00 here-in-before but of capacity 160 Amps 4 pole
Supply and fix VFD of capacity 2HP motor for 2ton EOT crane complete all as specified and directed Engineer-in-charge.
Supply and fix, testing of new self starter of DG set ranging from 5 KVA to 30 KVA complete all as directed.
All as per serial item number 109.00 here-in-before but without SS enclosure (open type) suitable for fixing inside existing panel of capacity 100 Amps 4 pole
All as per serial item number 113.00 here-in-before but capacity 40 KVA to 62.5 KVA
All as per serial item number 113.00 here-in-before but capacity 75 KVA to 100 KVA
All as per serial item number 113.00 here-in-before but capacity 125 KVA to 200 KVA
All as per serial item number 113.00 here-in-before but capacity 250 KVA to 500 KVA
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.
Material and laour for mild steel, plain, black sheet 1.6mm thick in wall cladding, steel gate and similar work, cut to size, hole punched including round headed screw, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams, including bending or turning up, mitred angles etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Supply and fix in repairs Steel work in tubularworks (round or square)/angle trusses including special shaped washer etc. complete using ERW or induction butt welded tubes as in verticle posts,trusses, purlins (beam,tee,angle,channel,flat,sections) including distance pieces, cleats etc. conforming to I. S.1161- 1979 grade St.-240 complete including taking out old u/s steel screw, nut bolts etc complete all as specified and directed.
of mild steel screw bolts (machine made) length of bolt exc 22.5 cm and n exc 30 cm alongwith hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck 11 to 15mm complete including taking out old u/s steel screw, nut bolts etc all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.
Supply and fix in repairs Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including taking down of old u/s GI sheet of any description and size all as specified and directed.
r DG set of capacity upto 5 KVA to 30 KVA.
Supply and fix in repair strip heaters for AMF/LT/HT panells, heaters of capacity upto 100 watt, 230 volt AC complete all as specified and directed.
Supply and fix in repair thermostat switch for AMF/LT/HT panells, of temp controlling range from 30oC to 110oC capacity 15 amp, 240 volt AC complete all as specified and directed.
Supply and fix in repair 12 core 1.0 sq mm copper conductor, PVC insulated & PVC sheathed multicore round flexible Industrial Control cable , 300/500 Volt grade for AMF/DG set control panels complete all as specified and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tender8088.pdf
Tender Documents • 0.90 MB
BOQ_827495.xls
BOQ • 1.01 MB
Download all tender documents and submit your bid