Providing pumping main and vertical connections to new OHSR in Kesavarappadu village in Karamchedu Mandal of Bapatla District.Est.Cost.15.00 Lakhs

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works)

Supply and delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel and lowering, laying and fixing the valve in the pipeline including necessary specials, jointing materials, dismantling joints etc., including construction of RCC valve chamber of departmental approved size etc.complete for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST .For 80mm dia PN

Supply and delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel and lowering, laying and fixing the valve in the pipeline including necessary specials, jointing materials, dismantling joints etc., including construction of RCC valve chamber of departmental approved size etc.complete for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST .For 100mm dia PN

Supply and delivery of HDPE PE-100 6 Kg/Sqcm Pipes as per IS : 4984/2016 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. HDPE, PE-100 , PN6, DN90 pipeline of Pipeline trench size is 0.70mX1.00mx1.00m.

Earth work excavation for pipe line trences (2/3 machinery and 1/3 manual) in all soils except rocky soils including lowering, laying and jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and removing surplus earth and testing to required hydraulic test pressure etc. complete for finished item of work of 1.00 Rmt of HDPE PE-100 6 Kg/Sqcm.for 90 mm dia HDPE 6 Kg/cm2

Supply and Transportation of………. Three phase ISI self priming Mono block IP44 motor pumpset .Makes: As per list of recommended brands as category I. for 7.50 HP Three phase motor Block pumpset.

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.above 3 HP and uptoUpto 7.5 HP with DOL Starter

Erection of submersible pumpset including commissiong, testing and trial run.

Cost of 80mm dia GI pipe of medium class including all charges etc completed.For only cost

Cost of 80mm dia GI pipe of medium class including all charges etc completed.For Laying and fixing charges.

Cost of 65mm dia GI pipe of medium class including all charges etc completed.For only cost .

Cost of 65mm dia GI pipe of medium class including all charges etc completed.For Laying and fixing charges.

Supply and delivery of DI D/F Tilting disc Swing Check Valves Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Shafts of stainless steel, shaft bearing of zinc free bronze and Integral body seat face & disc face with nickel-chromium overlay welding and micro finished. All the inside and outside of the body is to be coated with double coating of food grade epoxy liquid lacquer (EP-F) with minimum thickness of 150 microns, color: RAL 5005 Blue face to face dimensions according to EN 558-1/14/DIN 3202-F4, Flange dimensions according to EN1092-2/IS 1538 completed and lowering, laying and fixing the valve in the pipeline including necessary specials and jointing materials, including construction of RCC valve chamber of departmental approved size etc.complete, for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges , etc complete for finished item of work, but excluding GST for NRV.for 80mm dia DI NRV PN

Supply and delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel and lowering, laying and fixing the valve in the pipeline including necessary specials, jointing materials, dismantling joints etc., including construction of RCC valve chamber of departmental approved size etc.complete for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST .for 80 mm dia PN