Construction of Washroom, Library and Renovation of existing Bar Room at the Sub Judge Court Uri

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing of curtains with full kashmiri art crewel work of apporved cloth size 7'x3'including fixing of curtains rods as per direction of engineer Incharge at site including all cost and carriage.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Providing & fixing in position hallow pvc reinforced PVC Panelling 8 mm thick mm of standard size , in approved colour, texture and finish for walls and ceiling . The PVC Panels shall be fixed with tongue and groove interlocking system, including cost of scaffolding, necessary underground framework required including necessary l beadings/corner moulding , cornice tc complete job at all levels (heavy type).

Providing and supplying executive office chair made of ergonomic design, having a nylon/metal wheel base, cushioned seat and back, adjustable height-gas lift mechanism, and comfortable armrests, upholstered with good-quality fabric/leatherette, complete with all fittings. The item includes delivery, loading/unloading, and all incidentals required for satisfactory completion of the job as per directions of the Engineer-in-Charge.

Providing and supplying arm chair made of high-quality steel frame, fabricated from heavy-duty tubular steel sections of approved gauge, duly powder-coated, fitted with ergonomically designed seat and back made of high-quality foam and fabric upholstery of approved shade, including arm rests, rubber stoppers, finishing, transportation, loading/unloading and all incidentals required for proper completion of the job. Complete job as directed by the Engineer-in-Charge

Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately) 9.20.2 MDF board conforming to IS: 14587 edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand 18mm thick

Providing and installation of Conference Table (18 ft × 4 ft) Providing, fabricating and installing conference table of size 18 feet in length and 4 feet in width, made out of seasoned plywood of approved quality, finished with 1mm thick laminate (denmica) on top surface and sides, including necessary wooden framing, edge beading, polishing, provision of cable management slots, all complete. The job includes transportation, loading/unloading, fixing at site, and all labour, materials, tools and accessories required for satisfactory completion of work as per directions of the Engineer-in-Charge

Providing and fixing IFPD smart board Screen Size: 65 inch Resolution: 3840 × 2160 (4K UHD) or higher Brightness: ≥ 350 nits Touch Points: ≥ 20Warranty: RAM/ROM: 8Gb/128GB OS: Android (14.0 or latest) + Compatible with Windows/Linux/Mac Audio: 2 × 15W or higher speakers Connectivity: HDMI, USB, LAN, Wi-Fi and Bluetooth (in-built), Warranty: 3 Years onsite Accessories: Wall mount kit + stylus pens Software: Annotation/Whiteboard, license-free complete job as per direction of Engieer Incharge at site

50 WATTS or Higher PA Amplifier Set, Two Wireless Mics, Bluetooth Connectivity, 12v or higher Rechargable Battery, with Trolley and Wheels. As per direction of Engineer Incharge at site

Providing, supplying and installation of Hot & Cold Water Purifier/Dispenser of approved and registered brand such as Kent / Aquaguard / Blue Star / AO Smith, having in-built purification system (RO/UV/UF as per model), stainless steel water tank, hot & cold dispensing mechanism, food-grade body, suitable for continuous operation in office environment, including all necessary accessories, plumbing connections, transportation, testing and commissioning, complete job in all respects as per the directions of the Engineer-in-Charge.

Providing, supplying and installation of 1.5-Ton capacity inverter type Air Conditioner of approved/reputed brand such as Daikin / LG / Voltas / Hitachi / Panasonic, including indoor and outdoor units, complete copper refrigerant piping, drainage pipe, electrical connections, mounting stands, insulation, testing and commissioning. The job includes all accessories, labour, consumables and tools required for a complete functional installation as per directions of the Engineer-in-Charge

Providing and installation of Coffee Vending Machine of approved and reputed brand (such as Nescafé / Atlantis / Saeco or equivalent), suitable for office use, including supply of all required accessories, transportation to site, installation, commissioning, testing, demonstration of operation, and handing over complete in all respects.The machine shall be fully automatic, capable of dispensing minimum 3–4 hot beverages, equipped with digital controls, heating system, food-grade internal components, and compatible consumables.Complete job as directed by the Engineer-in-Charge.

Providing and fixing of Lighting point One Lighting point shall incl. wiring for lighting points in 1.5 Sq.mm PVC insulated Copper wire & 2.5 Sq.mm PVC insulated multi-strand Copper wire for lighting Sub-mains, 6 Amp one way switch, 2 mm thick PVC conduit / Channel with bends, Junction boxes etc, 6 Amp S Pole MCB, 10 Amp DP MCB, 2 way DB for Housing MCB and Hylef Sheet with wooden box recessed in walls with accessorios as per direction of engineer Incharge at site including all cost and carriage

providing and installation of 15w round led panel ceiling light of approved brand and quality (havels/goldmedal/philiphs) 6 inch dia complete job

Providing, installation, testing and commissioning of complete inverter backup system consisting of 1500 Watt UPS/Inverter (pure sine wave), 230Ah tubular battery with battery stand, interconnecting leads, terminals, and 1200 Watt solar panel array with MPPT/PWM solar charge controller, mounting structure, wiring, junction box, earthing and all accessories required for proper functioning; including all necessary wiring connections from main distribution board to inverter and from inverter to load circuits, complete job as per directions of Engineer-in-Charge

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Providing and laying of stone soling hand packed including all cost and carriage complete job as per direction of Engineer Incharge at Site.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing in position door/window/arch windows/ventilater wrought frames chowkats 3 "x 5" of first class imported kail wood excluding cost of holdfasts and concrete for embedment.

Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

12mm Cement plaster on the rough side of single or half brick wall of mix: 13.5.1 1 : 4 ( 1 cement : 4 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe, 16mm OD(SDR-7.4)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid.

75 mm diametre

110 mm diametre

Coupler 75 mm

Coupler 110 mm

Single tee with door 110x110x110 mm

Single tee without door75x75x75 mm

Single tee without door 110x110x110 mm

Bend 87.5° 75 mm bend

Bend 87.5° 110 mm bend

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia.

Supply, Placing and fixing in position 50litre water Gyser including all necessary fittings. (3Pin electric socket and wiring) Main line from nearest sourse jaguar brand as per the directions of EIC

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

Providing and fixing panelled or panelled and glazed shutters for doors, and wire Gauge shutters in ventilators , including ISI mark black enamelled butt hinges with necessary s

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia