EXECUTION OF CITY GATE STATION AND CNG FILLING STATION

Amount

SCHEDULE OF RATE - CIVIL WORKS

SITE CLEANING : Surface dressing of ground in all kind of soil including removing vegetation, debris, malba or any obstruction existing on site, all inequalities upto natural ground level as direction of Engineer -In-Charge and disposal of unserviceable material away and outside the IOAGL boundary limits irrespective of lead involved by means of mechanical transport or any other equivalent means, keeping IOAGL indemnified of any liabilities from statutory/local bodies, all complete as specified & directed. (Item shall not considered if plot excavation considered separately.)

PLOT CUTTING AND EXCAVATION: Earth work in Excavation and cutting of earth to remove upto 300mm thick top layer of black cotton soil in any plan dimension including stacking of excavated earth at vacant nearer plot or and disposal of surplus and unserviceable earth up to any lead in all conditions. Soil to be leveled and neatly dressed and compacted with mechanical compactors/roller to the specified levels complete in all respect as per scope of work, detailed construction drawings , as per technical specifications and directions of the Engineer-in-charge.

Pile Work- Construction of 450 & 300 mm nominal dia. Reinforced concrete cast-in-situ bored piles with rig machine or by cutter inclusive of all materials labour, tools and plants and special machinery, layout of works, shifting & installation of boring equipment/plants from one pile location to another including bentonite solution in pile bore under unstable and or high water soluble soil condition for retaining shape of bore with bulb and Bulb shall be provided as per drawing, 5 kg. of bentonite will be used in 100 litres, clear water required for proper completion of work as per drawing, specifications and direction of Engineer-in-charge. Note:- Reinforcement, & Concrate to be measured and paid seperately as per respective SOR items.

450 dia- Capacity of 15 T

EXCAVATION UPTO 1.5mt : HARD SOIL Excavation up to 1.5 mt. depth in all kind of Hard soil in any plan dimension including stacking of serviceable excavated earth, and disposal of surplus and unserviceable material away and outside the IOAGL boundary limits, after backfilling using serviceable earth, irrespective of lead involved by means of mechanical transport or any other equivalent means, keeping IOAGL indemnified of any liabilities from statutory/local bodies, all complete as specified & directed. Proper shuttering/support has to be made to support side soil wall and to avoid collapse of soil. Soil to be leveled and neatly dressed complete in all respect as per scope of work, detailed construction drawings, as per technical specifications and directions of the Engineer-in-charge.

EXCAVATION 1.5 TO 3.0 mt : HARD SOIL Excavation for foundation from 1.5 mt. to 3.0 mt. depth in all kind of Hard soil in any plan dimension including stacking of serviceable excavated earth, and disposal of surplus and unserviceable material away and outside the IOAGL boundary limits, after backfilling using serviceable earth, irrespective of lead involved by means of mechanical transport or any other equivalent means, keeping IOAGL indemnified of any liabilities from statutory/local bodies, all complete as specified & directed. Proper shuttering/support has to be made for excavation beyond 1.5mt to support side soil wall and to avoid collapse of soil. Soil to be leveled and neatly dressed complete in all respect as per scope of work, detailed construction drawings, as per technical specifications and directions of the Engineer-in-charge.

SAND FILLING : Supplying and filling approved SAND of good quality (River Sand), under floors, pavements, in foundations etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts , including loading, unloading, spreading in layers of loose thickness not exceeding 150mm, watering, ramming, compacting with mechanical compactors and/ or other equipment to the specified levels to achieve 85% relative density, including preparation of sub-grade to the required slope, providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge. The rates shall be inclusive of the cost of all labour, material, equipment etc. complete.

RUBBLE SOLING Providing and laying 230mm thick dry rubble stone soling using 150-225mm size boulders in foundations, plinth flooring, trenches, ramps and other areas including packing with smaller stones of 65 mm & 40 mm chips in voids, bonded with stone grit or good quality murrum brought from outside, fine aggregate etc. watering, consolidating by manual tamping as directed.The compacted depth shall be taken for the measurement of quantity.

ANTI TERMITE TREATMENT : Carrying out anti termite treatment with chlorophyriphos 20% EC in three parts i.e. at foundation level, at plinth level and at periphery of the building as per IS : 6313 (Part I- III)-1981, 1st revision, as directed. Plinth area to be measured. 10 years Guarantee to be given by the agency. Application of anti termite treatment given below. a) Application concentration or chemicals: Chlorphyriphos 20% EC- 50 ml mixed in 1 liter. water b) After the final depth of the foundation trenches is reached ,the horizontal and vertical sides shall be soaked with insecticides by high pressure pump at least 200 ml for 1 sq. mt. along both sides of foundation walls and foundation bottom. c) After vertical and horizontal sides of the foundation trenches are treated in the manner as described above. The floor area in between the walls shall be bored in the natural soil surface at suitable space intervals depending upon the types of soil. The chemical used shall be at the rate of at least 200 ml for 1sq. mt. d) After the walls are constructed and treated as specified above, complete saturation treatment shall be given by digging 1' 6" deep on the outer side and saturating the same with insecticides at the rates of at least 1.5 lts. per linear foot of wall. e) Treatment shall not be made when the soil or fill is excessively wet or immediately after heavy rains, to avoid surface flow of the toxicant from application site. Unless the treated areas are to be immediately covered, precautions shall be taken to prevent disturbances of the treatment by human or animal contact with the treated soil.

P.C.C. : (1:3:6) Providing and laying Plain cement Concrete of nominal mix 1:3:6 by mass (1 cement: 3 coarse sand: 6 crushed stone aggregates/gravels) with 40mm down size graded crushed stone aggregates for all depths below and up to plinth level in foundations, drains, fillings, non suspended floors, pavements and ramps or any other works etc. in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed, including tamping, ramming, vibrating, curing etc. all as specified including the cost of materials, labour, tools, tackles, machinery, steel scaffolding/staging, sampling and testing all complete as per specification and direction of EIC/Consultant. Actual/Net measured quantities shall be paid. Cost shall including of formwork.

P.C.C. : (1:4:8) Providing and laying Plain cement Concrete of nominal mix 1:4:8 by mass (1 cement:4 coarse sand: 8 crushed stone aggregates/gravels) with 40mm down size graded crushed stone aggregates for all depths below and up to plinth level in foundations, drains, fillings, non suspended floors, pavements and ramps or any other works etc. in any shape , position, thickness and finishing the top surface rough or smooth as specified and directed, including tamping, ramming, vibrating, curing etc. all as specified including the cost of materials, labour, tools, tackles, machinery, steel scaffolding/staging, sampling and testing all complete as per specification and direction of EIC/Consultant. Actual/Net measured quantities shall be paid. Cost shall excluding of formwork.

RCC : M20 (SUB & SUPER STRUCTURE) Providing and laying Reinforced Cement Concrete of nominal mix M-20 (1:1.5:3) Grade (Concrete shall be design mix), with 20 mm & down size graded crushed stone aggregates in SUB-STRUCTURE below plinth level of all types e.g. foundations, rafts, beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses , trenches, manholes, pipe encasement, catch pits, drains, RCC pits, equipment foundations, pedestals, columns, pavements, suspended floors, brackets etc. and SUPER STRUCTURE like beams, slabs, walls including counter forts, staircases, landings, steps, facias, gutters, shelves, window sills, canopies, lintels, ducts, brackets, chhajjas with drip molds etc. and any other structures (including single pour concreting upto 50 Cu. m. ) providing pockets, openings, recesses, chamfering, vibrating, tamping, curing and rendering, to give a smooth and even surface (Excluding the cost of REINFORCEMENT & SHUTTERING) for all depths below and upto plinth level in any position, shape, level and thickness etc. including the cost of materials, labour, tools, tackles, machinery, steel scaffolding/staging, sampling and testing all complete as per specifications and directions of the Engineer-in-charge. The rate shall excluding the cost of shuttering and reinforcement. Actual/Net measured quantities shall be paid.

RCC : M25 (SUB & SUPER STRUCTURE) Providing and laying Reinforced Cement Concrete of nominal mix M-25 (1:1:2) Grade Excluding the cost of formwork and reinforcement , with 20 mm & down size graded crushed stone aggregates in SUB-STRUCTURE and SUPER STRUCTURE below plinth level of all types e.g. foundations, rafts, beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, manholes, pipe encasement, catch pits, drains, RCC pits, equipment foundations, pedestals, columns, pavements, suspended floors, brackets etc. and in SUPER STRUCTURE like beams, slabs, walls including counter forts, staircases, landings, steps, facias, gutters, shelves, window sills, canopies, lintels, ducts, brackets, chhajjas with drip molds etc. and any other structures in any other structures (including single pour concreting upto 50 Cu. m.) providing pockets, openings, recesses, chamfering, vibrating, tamping, curing and rendering, to give a smooth and even surface for all depths below and upto plinth level in any position, shape, level and thickness etc. including the cost of materials, labour, tools, tackles, machinery, steel scaffolding/staging, sampling and testing all complete as per specifications and directions of the Engineer-in-charge. Actual/Net measured quantities shall be paid.

TMT STEEL REINFORCEMENT : Supplying and placing in position High strength deformed TMT Steel Bars Reinforcement (Conforming to IS:1786, Grade Fe 415/500/500D) of TATA or equivalent make (as approved by EIC) for RCC work including transporting, straightening, cleaning, de-coiling, cutting & binding to required shapes and lengths as per details, binding with contractor's own 16SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fan hooks etc. for all heights and depths etc. complete as per specification, directions and drawings. ALL MATERIALS SUPPLIED BY THE CONTRACTOR. (Supports, Chairs and laps are included in the cost and no separate measurement qty will be paid for the same) Reinforcement steel shall be of Tata, Sail, vizag or approved by consultant.)

SHUTTERING : Providing and fixing Shuttering/Form work using ordinary timber plank, shuttering ply, steel plates so as to give smooth finish, including centering, shuttering, strutting, propping, surface oiling, nails, binding wire etc. keeping the necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete for SUB STRUCTURE like foundations, pedestals, footings, slabs, pile caps, retaining walls, beams, staircases, landings, suspended slabs, etc. and SUPER STRUCTURE like in equipment foundations, columns, lintels, slabs, beams, staircases, landings, suspended slabs/floors/roofs, walls etc. and other structures keeping the same in position during concreting and removal of the same after specified period in all complete and as specified and directed. Actual/Net measured quantities shall be paid. The rate shall includes cost of material, labour, tools tackles, machinery etc. all complete. Actual/Net measured quantities shall be paid.

FULL BRICK MASONRY: SUB-STRUCTURE Providing and laying FULL BRICK MASONRY (230mm th. or more) with bricks of class-1, strength not less than 35 kg/sq.cm in cement mortar 1:6 (1 cement: 6 sand) in one or more brick thickness and in any shape in sub-structure at all depth/level including the cost of materials, labour, steel scaffolding/staging, sampling and testing, soaking of bricks, cutting & laying of bricks, providing recesses, making openings of any shape and size, embedding the fittings & fixtures, curing etc. all complete as per specifications. All materials including Cement to be supplied by the contractor. The rate shall includes cost of material, labour, tools tackles, machinery etc. all complete.)

FULL BRICK MASONRY: SUPER-STRUCTURE Providing and laying FULL BRICK MASONRY (230mm th. or more) with bricks of class-1, strength not less than 35 kg/sq.cm in cement mortar 1:6 (1 cement: 6 sand) in one or more brick thickness and in any shape in super-structure at all height/level including the cost of materials, labour, steel scaffolding/staging, sampling and testing, soaking of bricks, cutting & laying of bricks, providing recesses, making openings of any shape and size, embedding the fittings & fixtures, curing etc. all complete as per specifications. All materials including Cement to be supplied by the contractor. The rate shall includes cost of material, labour, tools tackles, machinery etc. all complete.)

HALF BRICK MASONARY :SUPER STRUCTURE Providing and laying HALF BRICK MASONRY (115mm th.) with bricks at all levels of class-1 , strength not less than 35 kg/sq.cm in cement mortar 1:4 ( 1 cement :4 coarse sand) including providing necessary steel scaffolding staging, opening, curing, raking out joints providing and placing two Nos. 6mm dia M S bars at every fourth course and Khranja at 1.2mt height etc. all complete as per specifications and directions of the Engineer-in-charge. The rate shall includes cost of material, labour, tools tackles, machinery etc. all complete.)

PRECAST COMPOUND WALL up to 2.5 mtr height Providing and Fixing Precast RCC Compound Wall, of 2500 High (clear above NGL/FGL), 150mmx150mm column shall be fixed min 450mm in RCC retaining wall constructed up to FFL. The distance between two column shall be such that plank size (2010mm x 300mm x 50mm) / (2750mm x 300mm x 50mm) shall be inserted in the same. The wall shall vertically in plumb and in true line and level and apply 3 coats Exterior type weather proof Apex paint on all visible surfaces of approved make and shade. The installation shall be done as per the supplier's specifications and site requirement. The cost includes PCC, Concrete, required materials tools and labor, transportation etc. all complete.

EXTERNAL PLASTER : 20mm Th, Double coat, Sand Faced (Tippani)/Mala Finish (1:4) Providing and laying 20 mm thick two coat external sand faced tippani finish Cement Plaster on exterior walls of building & Compound wall in two layers including making groove and Tapak where ever required. (Consisting of 12 mm Th Base layer with rough finish in CM 1:4 with waterproofing chemicals and 8 mm Th top coat in CM 1:3 finish with sponge) including surface preparation, hacking the brick Masonary or RCC surface at all height/depth with all tools, material, labour, scaffolding and curing etc. to make even finish in true lines and levels all complete as per specifications and direction of engineer in Charge. Rate shall include providing & fixing chicken mash jali of best quality available & fixing it at brick and RCC junction all complete. Actual/Net quantities measured shall be paid..

PLASTER : 15mm Th (Mortar 1:4) Providing and laying of 15mm thick Cement Plastering Cement Mortar 1:4 (1 cement : 4 fine sand ) with waterproofing chemicals on RCC/Brick wall building or other structures including surface preparation, hacking the brick Masonary or RCC surface, at all height/depth with all tools, material, labour, scaffolding and curing etc. to make even finish in true lines and levels all complete as per specifications and direction of engineer in Charge. Rate shall include providing & fixing chicken mash jali of best quality available & fixing it at brick and RCC junction all complete. Actual/Net quantities measured shall be paid. (smooth nero plaster if instructed)

PLASTER : 10mm Th Mortar 1:4 Providing and laying of 10mm thick Cement Plaster with Cement Mortar 1:4 (1 cement : 4 fine sand ) on building ceiling including surface preparation, hacking the RCC surface at all height/depth with all tools, material, labour, scaffolding and curing etc. to make even finish in true lines and levels all complete as per specifications and direction of engineer in Charge. Actual/Net quantities measured shall be paid. (smooth nero plaster if instructed)

PAINT : Exterior Weather Proof (Apex Ultima) Providing and applying of exterior weather resistant 100% Acrylic paint of Apex Ultima matt finish paint (Base primer coat + Min. 3 or more coats) of approved make (Asian/Burger/ ICI )make shade for even finishing of external exposed walls/surface up to any height and level. The scope shall include Erecting, Scaffolding at all levels, preparing the surface by scrubbing with wire brush and removal of old paint (if exist), dust, oil, grease and any other particle for surface preparation before new paint application. Paint shall done with applying 1 coat of primer and 3 coat (minimum) of Apex Ultima Paint to give rash free smooth even finish . Rate shall including material, labour, tools tackles, scaffolding etc. all complete as specified and directed by EIC. Measurement to be considered as per actual on site for payment.

PAINT: Exterior Weather Proof (TEXTURE PAINT) Providing and applying of External Texture with weather proof exterior emulsion paint (min Three coats) including one coat of Primer on any height. make and pattern as approved Consultants/Client. Texture should be 2.0 to 2.5 mm thk layer with crack bridging up to 2.6 mm give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. The texture material shell be pure acrylic, Environment Friendly, Protect against salt and carbon dioxide UV resistance, Moisture vapor transmission coating with third party test certificate applied up to 140 microns DFT. etc. required scaffolding, jhulaa, tools and labor. complete

INTERNAL PAINT: WALL Finishing of interior wall painting (three coats) with plastic emulsion paint of approved brand & manufacture on undercoated wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping sand other foreign matter and sand papered smooth. (also including application of primer and preparing surface even & sand papered smooth with lapi, Astar.)

INTERNAL PAINT: CEILING Finishing of interior wall painting (three coats) with plastic emulsion paint of approved brand & manufacture on ceilings to give an even shade including thoroughly brushing the surface free from mortar dropping sand other foreign matter and sand papered smooth. (also including application of primer and preparing surface even & sand papered smooth with lapi, Astar.)

FLOORING:VITRIFIED FLOOR TILES (600X600MM) Providing and laying in position vitrified homegenous Unglazed uncoated tiles of approved make and colour shade 600x600 size of 9 mm thickness of first quality With/Without 3-5 mm groove as per design, set in cement slurry (3.3 Kg. cement/m2.) Avg. 35 mm (or more as required not Paid Extra) thick cement mortar 1:3 bedding and laid to proper slope and level.(As per Detils and Drawing) Finishing should be done with specified Grout including curing and cleaning with mild oxalic acid etc. complete, as shown and specified flooring steps, etc. complete, as directed by Consultant/Engineer -in-charge. Rate Shall include suppy of all tools tackels, laboure, material, as approved by consultant. Actual/Net quantities measured shall be paid. (Groove Filling will not paid Seprately)

SKIRTING :VITRIFIED SKIRTING TILES (600X600MM) Providing and Laying of Vitrified homegenous Unglazed uncoated Tiles of Approved make and Colour Shade) 600x600mm in size in skirting, risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) with/without 3-5 mm Grove. Filling Should be done with with ready mix polymer based cementitious Grout of BAL Or Pure Epoxy based or Equvivalant make and shead as approved By Client/Consultant Rate Shall including cutting, laying, clading , material all in complate manner.As dirrected by Engineer-In-Charge (Filling of Groves will not Paid Saperetly )

FLOORING: VITRIFIED FLOOR ANTISKID/ MATT FINISH TILES (300X300MM) Providing and laying Vitrified floor antiskid/Matt tile 300x300mm in floor of size as specified of 8 mm thk laid on a bed of avg 18-20 mm thick cement mortar 1:3 (1-cement : 3-coarse sand) in slop as per detail and drawings with/without 3-5 mm grove Make as approved by client/Consultant of Approved colour . Cleaning and complete. As directed by Engineer-In-Chargerates Rates shall including Filling Grove with Ready mix Cementenious based Grout or Pure epoxy based Grout Material. (Filling of Groves will not Paid Saperetly )

WALL TILE: VITRIFIED GLOSSY/MATT TILE 300x450mm Providing and laying of vitrified wall tile Glossy/Matt 300x450mm in dado, skirting, riser, of size as specified of 8/10 mm thk on 10-12 mm thk Cement mortar 1:3 (1-cement : 3-coarse sand) as per detail and drawings with/without 3-5 mm grove Make as approved by client/Consultant of Approved colour . Cleaning and complete. Rates are including of Filling Grove with Redy mix Polymer mix cementenious based Grout or Pure Epoxy Based Grout Material. (Filling of Groves will not Paid Saperetly )

FLOORING: SEMI MIRROR POLISHED KOTASTONE (18MM THK) Providing and fixing 18 mm thick semi mirror polished, machine cut Kota stone in Electrical Room laid over 20mm thick base cement mortar 1:3 (1 cement : 3 coarse sand ) with joints treated with white cement, mixed with matching pigment epoxy touch up, i/c rubbing, curing including nosing of corners.

SKIRTING:SEMI MIRROR POLISHED KOTASTONE (18MM THK) Providing and laying Semi mirror polished kota stone slab 18mm thick in risers of steps, skirting Dedo and pillars laid on 10mm thick cement mortar 1:3(1-Cement:3coarsesand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc.complete. (upto 10 ton)

FLOOR:GRANITE STONE (18MM THK) Providing and Laying 18 mm thick mirror polished, machine cut Granite approved color in floor, steps, wall and dado etc. laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand ) in true line and plain level with cement slurry to fix on wall / dado are cut according to the size and shapes given in drawing or to suit site dimension of the room and desired pattern with joints treated with white cement mixed with matching pigment , adhesive like araldite, including rubbing, curing, nosing of corners, cutting in profile, architectural works, etc. complete as per directions of Engineer In charge. [ Rate to include all labour, material, tools, tackles, hire charges, water charges, wastage, overheads etc. complete.] Actual/Net quantities measured shall be paid. For 100mm height skirting, payment to be made by considering skirting area multiplying 1.5 times to net area.

GRANITE STONE JAMBS & SILL Providing and fixing of 18 mm thick mirror polished, machine cut Graniteof approved color in wall and dado, door frame , windows sill & linel Jams etc. fixing in true line and level in approved pattern, lines and levels (including cutting of granites, chamfering/half round moulding & poliching of edges, etc) of approved shape ans size, fixed on wall/lintel/beam bottom with cement pest as required and joints to be filled in with white cement, pigments of shade and colours, etc. complete as per the directions of Engineer In charge. [ Rate to include all labour, material, tools, tackles, hire charges, water charges, wastage, overheads etc. complete.] Actual/Net quantities measured shall be paid.

GRANITE STONE: URINAL PARTITION (TWO SIDE POLISHED) Providing and laying 18 to 20 mm thick granite stone of two side polished (Colour as Approved by Consultant) for urinal partition with white cement slurry including rubbing and mirror/semi-mirror polishing,moulding etc. complete including cutting of granites, chamfering/half round moulding & poliching of edges, etc) of approved shape Rate to include all labour, material, tools, tackles, hire charges, water charges, wastage, overheads etc. complete.] Actual/Net quantities measured shall be paid.

GRANITE STONE COUNTER FOR WASHBASIN Providing and laying 18 to 20 mm thick full granite stone polished (Colour as Approved by Consultant) of Granite stone Counter for wash basin with necessary hole for wash basin and shelf with white cement slurry including rubbing, moulding and mirror/semi-mirror polishing,moulding etc. complete. [ Rate shall include all labour, material, tools, tackles, hire charges, transportation, water charges, wastage, overheads etc. complete.] Actual/Net quantities measured shall be paid.

ALUMINIUM DOOR WORK Providing and fixing aluminium Door work (Single Shutter OR Double Shutter) of Anodized aluminium section frame built up standard tubular and other section of approved make confirming to IS 733 and IS 1285 , member size with shutters of horizontal member , vertical member Confirming to IS733 and IS 1285 fixed with rawl plug abd screws or fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions at top bottom and sides with required PVC/ Neoprene felt, 8/12 mm toughened glass of approved make etc. Aluminum sections shall be smooth, rust free, straight.mitred and jointed mechanically wherever required including Door Hardware such as cleat angles aluminum snap beading for glazing /paneling, CP Brass/Stainless steel screws, Stoppers, heavy duty floor hing, S.S. Hinges, aldrop , Locking system, heavy duty Floor Springs, Pivot and fixtures and transparent silicon sealant glass fixing to frame as per details all complete as per architectural drawings and the direction of Engineer in Charge. rate incl. all type of alumnium sections for doors as per the detail Architectural dwg.

ALUMINIUM WINDOW & VENTILATION Providing and fixing extruded aluminium window & Vent having extruded aluminium Anodized section frame built up standard tubular and other section of approved make confirming to IS 733 and IS 1285 , Three/Two track member size with sliding shutters of horizontal member, vertical member Confirming to IS733 and IS 1285 fixed with rawl plug abd screws or fixing clips ,or with expansion hold fasteners including necessary filling up of gaps at junctions, at top ,bottom and sides with required PVC/ Neoprene felt, glass of approved make etc. Aluminum sections shall be smooth, rust free, straight.mitred and jointed mechanically wherever required including hardware such as cleat angles aluminum snap beading for glazing/paneling, CP Brass/Stainless steel screws, Stoppers, floor hing, S.S. Hinges, aldrop , Locking system , Floor Springs , Pivot and fixtures and transparent silicon sealant glass fixing to frame as per details all complete as per architectural drawings and the direction of Engineer in Charge. rate incl. all type of alumnium secions for , windows and Vents with 5/8/12 mm th. tinted glass as per the detail Architectural dwg.

FLUSH PRELAMINATED DOOR (30MM THK) Providing and Fixing of 30 mm thk Solid Flush Prelaminated Door both side 1 mm thk. laminates of approved brand with 125x80 mm thk ghana teak wood frame ( Single leaf ) including fitting, fixing shutters in position, SS fitting and Fixtures like Cylindrical Door locks, Stopper, Hinges, aldrops, long decorative handel and all Hardware materials of SS or of approved brand and make, all labour and Materials which will require for complete on site as per archi. details and drawing or as per instruction of site In charge.

DRIVE AREA : PAVER FINISH Execution of civil work to develop floor area finish with RCC tri-mix finish floor including scope of work of excavation, GSB, PCC, RCC, Paver block work with curbing / edge bounder finish including curing, Cutting, joint / gap filling, compacting, site cleaning, material sampling and testing for quality check etc. all complete. (1)EXCAVATION : Earthwork and excavation for foundation for drive area development in all kind of soil, hard murrum, soft rock, hard rock by pneumatic drilling etc. Stacking the excavated serviceable earth at least 3mts. away from the edge of excavation / foundation trenches and Disposing of the surplus non serviceable excavated earth and/or debris etc. including loading at site, transporting & disposal, unloading up to any lead in all conditions after backfilling using serviceable earth as per the instructions of the client or consultant. Dewatering shall include in scope of work if & as applicable. Plot area soil to be leveled and neatly dressed and compacted with mechanical compactors / roller to the specified levels complete in all respect as per scope of work, detailed construction drawings , as per technical specifications and directions of the Engineer-in-charge. (2) WBM : 300 MM Th.-Supplying and laying of 300mm Th. WBM LAYER BASE COURS (1st layer of 150mm th of downgraded stone size 63 to 90 mm and 2nd layer of 150mm th of downgraded stone size 40 to 63 mm) tough, sound, clean and durable including cost of stone aggregates with quarry dust / murrum filling in voids correcting the grade and slope for, all royalties, taxes, handling, transportation to site, unloading the same by the side of the road with all leads and lifts, spreading and laying to form water bound macadam in TWO LAYER of 150mm EACH compacted thickness to proper grade, camber & level, binding the surface with murrum, including the cost of supply of murrum, consolidating with min 10 T Vibro road-roller, watering, with all leads & lifts including preparation of camber below Paver etc. complete as per drawings, specification and direction Engineer-in-Charge. (3)P.C.C. :- Providing and laying of 75 mm th. as specified in drawing 1:4:8 ( 1 cement : 4 coarse sand : 8 M/C graded stone aggregates of 40 mm nominal size) / as specified in drawing cement concrete in proportion as per shown in drg. for all depth and thickness incl. shuttering, centering, ramming tempering and curing etc. P.C.C should completed in proper line and lvl. Provide and lay 600mic PVC sheet over compacted GSB top layer prior to do PCC over it. (4) PAVER BLOCKS : Providing and laying 80 mm thick ( grey or red ) rubber molded paver blocks of approved pattern in forecourt area or as per located in drawing (approved by client/ consultant) having compressive strength 400 kg/sqcm laid over 50 mm th river sand bed and joints to be filled with river sand and Compaction by Mechanical Compactor. Paver blocks should be in proper line and lvls. Paver block pattern, colour and make as approved by Owner/ EIC. (5) Provide and laying curbstone of size 450x500x150 / 450x300x150, smooth finish with half round top edge chamfer, shall fix in true line and level as specified and apply approved paint over it

KERB STONE : 500/450MM x 300MM X 150MM Providing and fixing of smooth finish precast kerb stones of size 500/450MM X 300MM X 150MM th. in true line and level including necessary excavation, surface dressing, even base preparation, back filling, fixing in true lines & levels and finishing the joints with neat cement mortar 1:2 all complete as per drawing and directed by EIC. Actual / Net quantities measured shall be paid.

METAL STONE FILLING : 40-65mm STONE SIZE Providing and laying of machine cut stone aggregate (metal stone) of size 40-65 mm in layers between 100-150 mm in transformer area including compacting as per specifications and directions of Engineer-in-Charge.

TRIMIX FLOOR Providing & Laying 150 mm thick Vacuumed Dewatered, surface vibrated, and finished with trimix machine with controlled grade i.e. M 20 R.C.C. or as specified in drg (which ever is higher shall use) including formwork and reinforcement (min 10mm Dia, 300mm C/C both way or as specified in drg which ever is higher), Rockite or equivalent metallic floor hardener @ 4.5 kg/Sq.m, formation of construction joints 6-10 MM th @ 3 M c/c by cutting up to 1/4th thickness of concrete slab with mechanized screw and filling the same with semi rigid epoxy based sealant as per detail drawing and as per instruction of engineer in charge. including preparation of base, excavation,300 thk GSB/WBM, 100 mm thk PCC, PVC sheet , layoing, finishing, cutting grove, curing finishing etc., complete. Including scope of Provide and laying curbstone of size 450x300x150, smoot finish with half round top edge chamfer, shall fix in true line and level as specified and apply approved paint over it.

WATER TRENCH WITH GRATINGS Execution of civil work to construct RCC Water trench (550x600mm) with RCC Top covers. The scope of work shall includes excavation, min 200mm stone soiling (GSB/WBM as directed by EIC), 100mm PCC (1:3:6), RCC M25 or as specified in drg, shuttering, reinforcement, 15mm thick waterproofing plaster, Grade - C Glazed Tiles, angles/channel fixing etc all complete as specified in drawing with maintaning proper quality control, curing and as in specified slope.complete in all respect as direction of EIC.(Ref Tender Drawings Road and trench detail)

Fabrication : Structural Steel (General) Structural Fabrication Works - Supplying, Fabricating, Erecting & Fixing in position structural steel items viz. structure, trench covers, dispenser frames, cascade structure, pipe support, valve support, hand railing, ladder, staircase, clamps, brackets and all miscellaneous steel works as detailed and as directed by EIC at all levels using MS angles, beams, channels, tees, plates, pipes, rounds, squares, flats including hard wares like hinges, nuts, bolts, washers, etc. of various sizes and other structural steel sections conforming to IS 2062 including straightening, cutting, fabricating, welding, bending to shape, bolting, fixing in position, welding to other MS structure item or insert plate embedded in wall/concrete at site and finished the surface neat after grouting. Rate shall include for painting with two coats 50 micron DFT for Each Coat of synthetic enamel paint over a coat of 50 micron DFT for Zinc chromate primer, etc. complete, as directed by Engineer In charge. Material shall be of TATA/VIZAG/SAIL/ESSAR or other equivalent make only. Actual/Net quantities measured shall be paid. Weight of washers, nuts & bolts shall not be paid extra. Note : 1. Welding rods of Adani or Ador make only to be used. 2. ISI marked E-7018 to be used for welding on beam or truss part and 6013 for rest or as directed by Engineer-in-charge. 3. Welding rod to be preheated to 60 degrees centigrade before usage. 4. If fabrication work is done at site then contractor will have to bear the electricity consumption charges.

BARBED WIRE CONCERTINA COIL FENCING Providing and fixing barbed wire concertina coil fencing with punched tape concertina coil 450 mm dia 10 metre openable length (total length 90 m) having 50 nos rounds per 6 metre length, over 2.5 m height of wall with L-50x50x5 mm thk angle iron 'Y' shaped placed 2.0 m apart and with 6 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-incharge with reinforced barbed tape (R.B.T.)/Spring core (2.5mm thick) wire of high tensile strength of 1800N/mm with tape (0.52 mm thick) and minimum coil weight 50kg/coil (cost of M.S. angle shall be paid separately)

ROOFING SHEET Providing and fixing roofing 0.5 mm Trapezoidal profile high tensile precoated G.I. steel sheets (fy=550 mps) having profile depth of 28-32 mm and pitch of 186-250 mm with zinccalume coating 150 gsm and 35 microns super polyester colourbond XRW quality paint system, compatible flashing, fittings E. and fixtures and erecting them on roof/sides using self drilling, self tapping fasteners at proper positions, minimum overlapping required is 300 mm, water test, all work as per specifications by consultant. Supplying and fixing Plain G.I. sheet flashing 20SWG thick with G.I. 'J' or 'L' hooks ; G.I. limpet and Bitumen washer complete. silicon filling for water proofing 20 gauge sheets. Bond to be provided for water proofing of roofing sheet.visible area shall be calculated for final measurement.

Providing & Laying integrated cement based proprietary water proofing treatment of required thickness over the roof including 10mm thick cement mortar 1:3 and CHINA MOSAIC fitting and finally finishing the surface with white cement slurry and sloping out terrace slabs with Following specification laid to required slope not flatter than 1:80 ( the thickness of water proofing treatment near rainwater outlet or the lowest point of the finished slope shell not to be less than 45 mm. Including treating the vertical surface of the parapet wall up to 20 cm. height above finished level of terracing including finishing top with joint less water proofing plaster curing testing etc, completed. Rate is Including 10 years performance of guarantee bond to be given on stamp paper ( no extra shall be paid for increase in thickness for proper slope ). (A) Applying & grounting a slurry coat of neat cement using 2.75 kg/smt. of cement admixed with proprietary water proofing compound confirming to IS 2645 and 10mm. Thick water proofing cement plaster in cement mortar in 1:3.over the RCC slab including cleaning the surface before treatments. (B) Laying cement concrete using broken brick bat using 25 mm to 40 mm size with 50% of cement mortar 1:4 ( 1 cement : 4 corse sand ) over 10mm. thick water proofing cement plaster in cement mortar in 1:3 admixed with proprietary water proofing compound conforming to IS 2645 required slope and treating similarly the adjoining walls up to 200 mm height including rounding of junction of walls. (C) After two days of proper curing applying a second coat of cement slurry . (D) Finishing the surface with china mosaic peices laid on 10 mm thick joint less cement mortar of mix 1:3 ( 1 cement : 3 sand) admixed with proprietary water proofing compound confirming to IS 2645 and finally finishing the surface with trowel with neat cement slurry . (E) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing for final test. All above operation to be done in order and as directed and specified by the engineer in charge.

IPS Providing and Laying min 100 mm thick IPS with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate) (using SBR, multipurpose concentrated liquid polymer additive, Dosage: 300 ml per Cement bag of 50 kg) finished with proper smooth finishing in cement slurry and sloping out terrace slabe with following specification laid to required slope not flatter than 1:80 (the thickness of IPS near rain water outlet in proper slop for water disposal or the lowest point of the finished slope shall not be less than 25 mm, and Providing VATA, 10 cm. x 10 cm. size, quarter round concave/triangular in cement concrete 1:2:4 including curing , cement slury, finishing smoothing as per detail provided by consultant complete, [No extra shall be paid for increase in thickness for proper slope]

WEEP HOLES: Providing Weep holes 150 mm. dia. P.V.C. in the Retaining wall and Brick wall with all lead and lifts etc. complete as per specification.

CPVC PIPE:15mm pipe Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floorRate Shall including of clamps, overhang channel bolts nuts etc. complate as directed by Engineer In charge.A] 15 mm

CPVC PIPE:20mm pipe Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floorRate Shall including of clamps, overhang channel bolts nuts etc. complate as directed by Engineer In charge.B] 20 mm

CPVC PIPE :25mm Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floorRate Shall including of clamps, overhang channel bolts nuts etc. complate as directed by Engineer In charge.C] 25 mm

CPVC PIPE:32mm Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floorRate Shall including of clamps, overhang channel bolts nuts etc. complate as directed by Engineer In charge.D] 32 mm

CPVC PIPE:40mm Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floorRate Shall including of clamps, overhang channel bolts nuts etc. complate as directed by Engineer In charge. E] 40 mm

UPVC PIPE :15mm Providing laying and jointing in true line and level 15mm Dia U.P.V.C .PIPE 15mm Dia (SCH 40) for cold water including fittings make PRINCE/SUPREME/ASTRAL/FINOLEX ore quivalent as approved by client and cosultant. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joint sand fixing the same with adhesive solvent, including cost of all materials.

UPVC PIPE :25mm Providing laying and jointing in true line and level 25mm Dia U.P.V.C .PIPE (SCH 40) for cold water including fittings make PRINCE/SUPREME/ASTRAL/FINOLEX ore quivalent as approved by client and cosultant. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joint sand fixing the same with adhesive solvent, including cost of all materials.

UPVC PIPE :32mm Providing laying and jointing in true line and level 32mm Dia U.P.V.C .PIPE (SCH 40) for cold water including fittings make PRINCE/SUPREME/ASTRAL/FINOLEX ore quivalent as approved by client and cosultant. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joint sand fixing the same with adhesive solvent, including cost of all materials.

UPVC PIPE :40mm Providing laying and jointing in true line and level 40mm Dia U.P.V.C .PIPE (SCH 40) for cold water including fittings make PRINCE/SUPREME/ASTRAL/FINOLEX ore quivalent as approved by client and cosultant. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joint sand fixing the same with adhesive solvent, including cost of all materials.

UPVC PIPE :50mm Providing laying and jointing in true line and level 50mm Dia U.P.V.C .PIPE (SCH 40) for cold water including fittings make PRINCE/SUPREME/ASTRAL/FINOLEX ore quivalent as approved by client and cosultant. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joint sand fixing the same with adhesive solvent, including cost of all materials.

UPVC PIPE :65mm Providing laying and jointing in true line and level 65 mm dia. U.P.V.C. Pipe (SCH -40) line including fittings of standard make as apprroved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

UPVC/SWR soil waste pipe:160mm Dia Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe with 'O' ring 160mm dia of ISI 13592/92. Rate inclusive of all fittings like single or double "Y" with door, reducer, coupler single T with door bend, pipe clip on wooden patti etc.complete and making good the wall,ceiling and floor

UPVC/SWR soil waste pipe:100mm Dia Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe with 'O' ring 100mm dia of ISI 13592/92. Rate inclusive of all fittings like single or double "Y" with door, reducer, coupler single T with door bend, pipe clip on wooden patti etc.complete and making good the wall,ceiling and floor.

UPVC/SWR soil waste pipe:75mm Dia Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe with 'O' ring 75 mm dia of ISI 13592/92. Rate inclusive of all fittings like single or double "Y" with door, reducer, coupler single T with door bend, pipe clip on wooden patti etc.complete and making good the wall,ceiling and floor.

PVC SWR NAHNITRAP-75mm Providing and fixing PVC SWR nahni trap IS 14735 for drain - 75mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged gratring including the cost of cutting and making good the walls

PVC SWR NAHNITRAP-100mm Providing and fixing PVC SWR nahni trap IS 14735 for drain - 100mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged gratring including the cost of cutting and making good the walls

GULLY TRAP Providing and fixing S.W. Gully trap with C.I. grating brick masonry chamber & water-tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight. [I] Square mouth trap (C) 150mm x 100mm size P or R type.

COWEL-75mm Dia Providing and fixing cowel, on Ventilating pipes and verticals for soil and waste Pipes at top level / terrace level, as specified and required, etc. complete. 75mm dia

COWEL-100mm Dia Providing and fixing cowel, on Ventilating pipes and verticals for soil and waste Pipes at top level/terrace level, as specified and required, etc. complete. 100mm dia

PVC WATER TANK Providing & fixing in position ISI marked Rotational moulded Polyethylene Double layer cylindrical vertical storage tank (IS: 12701) water tank of approved quality and size on terrace including making inlet and outlet. Overflow and washout arrangement with G.I.connection including using necessary material and labour for connection etc. complete with closed cover including of providing and applying two coats of oil paint on outside of water tank as per drawing and specification including inlet and outlet joints shall be sealed by pipe sealent.

NON RETURN VALVE:25MM DIA Providing & fixing Gunmetal Check or non return full way Wheel Valve/Handle Valve ISI mark only. Joints shall be sealed by pipe sealant. For Water pipeLines (25mm Dia)

NON RETURN VALVE:40MM DIA Providing & fixing Gunmetal Check or non return full way Wheel Valve/Handle Valve ISI mark only. Joints shall be sealed by pipe sealant. For Water pipeLines (40mm Dia)

NON RETURN VALVE: 50MM DIA Providing & fixing Gunmetal Check or non return full way Wheel Valve/Handle Valve ISI mark only. Joints shall be sealed by pipe sealant. For Water pipeLines(E) 50mm dia.

NON RETURN VALVE:65MM DIA Providing & fixing Gunmetal Check or non return full way Wheel Valve/Handle Valve ISI mark only. Joints shall be sealed by pipe sealant. For Water pipeLines(E) 65mm dia.

INSPECTION CHAMBER:450 x 450 x 450/600mm Constructing brick masonary chamber for under ground C.I. inspection chamber and bends with bricks having crushing strength not less than 35 Kg/Cm2 in Cement Mortar 1:5 C.I.Cover with frame (Light dury) 450 MM x 450 MM internal dimensions, total weight of cover with frame tobe not less than 38 kgs. (weight of cover 23 kgs. and Wt. of frame 15kgs) R.C.C.top slab with 1:2:4 mix (1-Cement : 2-Coarse sand : 4-Graded stone aggregate 20MM size) foundation concrete 1:5:10 inside plaster 15MM thick with cement Mortar 1:3 finished smooth with a floating coat of neat cement on wall and bed concrete etc. complete.In side dimensions,450mmx450mm and 450/600 mm deep for single pipeline.

MIRROR:6mm THICK Providing and fixing 6mm thick Mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet fixed to wooden plugs with C.P.Brass screws and washers. (with wooden beeding as frame)

WASHBASIN (COUNTER TOP):550x425 mm Wash basin (Counter top) : Providing and fixing wash basin of approved quality and as approved by engineer in-charge with single hole in 18mm thick GRANITE including cutting holes and making good the same with fittings, (A) size of wash basin 550x425 mm counter top in white/color as decided by engineer in-charge. The rate is inclusive of waste pipe, connection pipe etc complete.

WALL HUNG WATER CLOSET Providing and fixing white vitreous china wall hung type water closet with soft closing seat and lid, C.P. brass hinges/ and rubber buffers, Including jointing with soil pipe fixing the on wall MS Chair Bracket, SS Bolts and washers fixing push plate/Half turn/Metropole cock fittings, include cost of all material , laboure ,duroplast soft close seat cover , jet spray, CI Chair Bracket, SS Bolts and washers, earthwork, cement concrete work making good for floor and wall all complete as per detail drawing and instruction of engineer-in charge.(make as approved by Architect/Consultant)

FLAT BACK URINAL:580 x 380 x 350 mm Providing and fixing white vitreous china flat back or half stall urinal of 580 x 380 x 350 mm with automatic flushing cistern (of approved make) with fittings CI/MS brackets standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS : 2556, CI trap with outlet grating and other couplings in CP brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required

METROPOLE FLUSH VALVE:25mm Dia Providing and fixing concealed body metropole flush valve CP Finish with control cock operation plate, 25 mm size of approved quality including cutting, fixing in pipe line, making good walls/floor where ever required , cement concrete work all complate as directed by Enginee In charge. (make as approved by Architect/ Consultant)

HEALTH FAUCET:20mm Dia Providing and Fixing 20 mm cromium plated brass Health faucet with 1000 mm flexible pipe and necessary accessories, Fixing and Approval of engineer in-charge.(make as approved by Architect/Consultant)

TWO WAY BIB TAP :15mm Dia Providing and Fixing of Brass Screw down Two way BIB Tap 15 mm i/d Polished Bright Chrome Finish of approved make with all necessary fittings. All the damages incurred while fixing shall be repaired to the satisfaction of the engineer in-charge ( make as approved by Architect/Consultant).

PILLAR COCK:-20mm Dia Providing and fixing Pressmatic auto close Pillar Cock with necessary concealed fitting and cover panels (a) 20 mm dia. All the damages incurred while fixing shall be repaired to the satisfaction of the engineer in-charge( make as approved by Architect/Consultant)

ANGULAR STOP TAP:- 20 mm dia: Providing and fixing stop Cock with necessary concealed fitting and cover panels. All the damages incurred while fixing shall be repaired to the satisfaction of the engineer in-charge ( make as approved by Architect/Consultant). .

BIB TAP:-15mm Dia Providing and fixing Bib Tap Chromium plated of 15 mm i/d with necessary concealed fitting and cover panels. All the damages incurred while fixing shall be repaired to the satisfaction of the engineer in-charge. Bib Cock shall be as approved by engineer in-charge

FLUSH COCK FOR URINAL Providing and fixing chromium plated self closing flush cock for Urinal flush of approved quality including fixing in pipe line etc. complete. 15 mm dia as aproved by clinet and consultant

C.P.Brass TOWEL ROD Providing and fixing C.P.Brass TOWEL ROD of 600mm x 20mm dia provided at wash basin fixed to wooden plugs with C.P.Brass screws.

TOILET PAPER HOLDER Providing and fixing toilet paper holder with all necessary fittings and accessories etc complete as directed by E-I-C,

S.S. SOAP DISH/TRAY Providing and fixing screw-to-wall type S.S. Soap dish / tray fixed to wall with CP brass screws, etc., complete

KITCHEN SINK Providing and fixing Kitchen sink (304 grade stainless steel 1.0 to 1.2 mm thk) with C.I. or M.S. brackets ,Perl Finish including cutting holes in Stone/wall/RCC and making good the same including of fittings like SS Waste Coupling(three pice ) . (i)600mmx450mmx 200/230 mm

Swan Neck Sink tap Providing and Fixing of swan neck Sink Tap Wall mount/Plateform Mount as specified in Drawing and Detail Rate shall Including of cost of labour, material, necessary fittings etc.

WATER COOLER AND RO : Supply installation and commissioning of Water cooler of 150ltr storage / 150LPH cooling capacity and RO system of capacity min 100LPH, Reverse Osmosis Technology, including required Sanitation filters, Carbon filters, Water softener workable, Auto cutoff for ROW water having TDS value unto 2000. System shall contain Water softener and corban filtration, Raw water booster pump, Sediment Pre-Filtration tank, Carbon Pre-Filtration tank, Reverse Osmosis Membrane, Post Carbon Filter, Bladder Storage Tank, Automatic Shut-Off Valve, Pressure Gauges, Solenoid valves, Feed Water Valves-angle stop valve, faucet adaptor, self-piercing valve / Solenoid valves, On line tds display etc. all complete as specified and directed by EIC / Consultant

GRASS LAWN Plantation and grass loan in planter with plants and english grass carpet etc. complete with all miscellaneous works, and sundry works. GRASS LAWN: Prepare the surface for grass and grassing the grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying of grass earth. DACORATIVE PLANTS: Preparation of bed hedging and shrubbery by excavating 60 cm deep at 750 mm C/C and trenching the the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth and 1 part of manure) flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of material declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 100 m lift upto 1.5 m complete and cost of sludge, manure or extra earth.

U. G. WATER TANK : RCC Providing and construction of U.G. Tank of min 10000 Liters capacity as per detail drawing in RCC M-20 mix, including water proofing with wire finish on all sides and bottom and fixing C- class glazed tiles, FRC cover-HD-20 capacity, CI steps, complete in all respect as per scope of work. Rate includes cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 53 grade cement including chemical resistant paint for sub-structures, bricks, reinforcement steel, inserts, bolts, covers, stone aggregates and other minor construction materials, shuttering, staging, earth work in excavation in all type of soil strata including hard murrum, soft rock, hard rock by pneumatic drilling etc. and backfilling using serviceable earth / earth brought from outside , shoring / strutting, bailing and pumping out water, masonry work, plastering, plumbing, sanitation etc. with all bye works and sundry works.( supply and installation of Submersible pump 3 HP , 3F supply for U/G Tank including necessary electrification work including supply and installation of ele starter and Autocut off system for over head tank all complete. )

SEPTIC TANK : Providing and construction of Septic tank of size 2000 x 900 x 1700 deep (Clear in to in dimensions) with wall in brick masonry and base and top slab in RCC M-20 with FRC manhole cover of HD-60 capacity, complete in all respect as per scope of work and detailed construction drawing. Rate to include cost of all labor, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement including chemical resistant paint for sub-structures, bricks, reinforcement steel, inserts, bolts, covers, aggregates/ sand fill conduits, finishes, bitumen, other minor construction materials, shuttering, staging, earth work in excavation in any kind of soil including hard murrum, soft rock, hard rock by pneumatic drilling etc. and backfilling using serviceable / borrow earth in all conditions, shoring / strutting, bailing and pumping out water, masonry work, plastering, plumbing, sanitation etc. with all bye works and sundry works.

SOAK PIT : Providing and construction of soak pit of size 2500mm diameter and minimum 4.20m deep with 350mm th. side wall in hollow brick masonry and top slab in RCC M-20/M25 as specified in drg, with FRC manhole cover of HD-60 capacity., complete in all respect as per scope of work and detailed construction drawing. Rate includes cost of all labor, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 / 53 grade cement including chemical resistant paint for sub-structures, bricks, reinforcement steel, inserts, bolts, covers, aggregates/ brick bats filling in 1.00 mt depth as shown in drawing and other all minor construction materials, shuttering, staging, earth work in excavation and backfilling using serviceable earth / earth brought from outside, shoring / strutting, bailing and pumping out water, masonry work, plastering, plumbing, sanitation etc. with all bye works and sundry works.

REHARVESTING WELL Providing and construction of Recharge well of size 3000mm diameter and 2 nos 200 dia bore hole min depth of 30 mts. with PVC slotted pipe, 300mm thk gravels (1.5 to 2.0mm), 400mm thk boulders (20 to 40mm) and 300mm thk coarse sand (1.5m to 2.0mm size) etc. as per detailed drawing with wall in brick masonry and top slab in RCC M-20, complete in all respect as per scope of work and detailed construction drawing. Rate are inclusive of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 53 grade cement, bricks, reinforcement steel, other minor construction materials, shuttering, staging, earth work in excavation in all type of soil strata including hard murrum, soft rock, hard rock by pneumatic drilling etc. and backfilling using serviceable / borrow earth in all conditions, shoring / strutting,, masonry work, plastering, etc. Complete as per prevailing local authority bye works and sundry works. Provide the inlet and outlet (PVC) pipe, inlet chamber and ball valve for same.

CHAIN LINK FENCING Providing, fabricating and fixing of Chain- Link Fencing using GI wire mesh size 50x50 mm of 3.15mm thick wire for fencing up to 2000mm height including fabricating, welding, tying with MS section angle frame and bracing of flat at equal spacing all complete as per approved drawing and directions of Engineer-in-charge. Fabricated fencing shall install on RCC foundation / Floor as per detail drg / specification. Work shall include necessary excavation, PCC, RCC footing, shuttering, fixing specified steel section pillars in foundation, foundation bolt / anchor bolt installation etc. all complete . Fabricated MS fencing shall finish with two coats 50 micron DFT for Each Coat of synthetic enamel paint over a coat of 50 micron DFT for Zinc chromate primer complete as per specification and drawing. Rate shall include cost of labour, tools, tackles, equipments, material etc. with fencing gate as per detailed drawing.

GATE 10.00 mtr. WIDE ROLLING GATE: Providing, fabricating and fixing of Rolling Gate of required width and height and shall fix on MS pole grouted in RCC foundation as shown in drawing. Work shall include MS Angle/Square/Rectangle Hollow Section fabrication and fixing of MS/Perforated plate of minimum 2mm thick size as per detail drawing. Fixing gate on 25 dia. MS Rod with rollers including fixing rolling gate assembly such as ball bearing, Nylon Rollers, Stud for roller MTG. MS gate and all assembly shall be finish with one coat zinc chromate primer and two coat 50 micron colour as per specifications and colour shade approved by consultant or client. Scope shall including related Civil work like excavation and PCC & RCC foundation for pole fixing, fixing embedded MS channel in RCC, base plate, bolts, rolling mechanism assembly, etc. all complete as per specification and drawing. Rate shall include cost of labor, tools, tackler, equipments , material etc. all complete.

GATE 4.0 mtr. WIDE: Providing, fabricating and fixing of Chain- Link Fencing Gate of required width and height and shall fix on MS pole grouted in RCC foundation as shown in drawing. Work shall include MS Angle / Box section fabrication and fixing of GI wire mesh size 50x50 mm of 3.15mm thick wire using MS flat. MS frame and structure shall finish with one coat zinc chromate primer and two coat 50 micron colour as per specifications and colour shade approved by consultant or client. Scope shall including related Civil work like excavation and PCC & RCC foundation for pole fixing etc. all complete as per specification and drawing. Rate shall include cost of labor, tools, tackler, equipments, material etc. all complete.

GATE 6.0 mtr. WIDE: Providing, fabricating and fixing of Chain- Link Fencing Gate of required width and height and shall fix on MS pole grouted in RCC foundation as shown in drawing. Work shall include MS Angle / Box section fabrication and fixing of GI wire mesh size 50x50 mm of 3.15mm thick wire using MS flat. MS frame and structure shall finish with one coat zinc chromate primer and two coat 50 micron colour as per specifications and colour shade approved by consultant or client. Scope shall including related Civil work like excavation and PCC & RCC foundation for pole fixing etc. all complete as per specification and drawing. Rate shall include cost of labor, tools, tackler, equipments, material etc. all complete.

100 MM DIA PVC PIPE For Rain water line Supplying and laying in position of 100 mm dia PVC pipes, 6 KG/CM2 with collars conforming to AS IS FOR DRAINAGE etc. including cutting the pipe if necessary, lowering, laying in position to proper levels, slopes, clamping etc.caulking the joints with spun yarn soaked in neat cement slurry and finishing with cement mortar 1:2 (1 cement: 2sand),CC, curing etc. all complete as per drawings, specifications and directions of Engineer-in-charge. Rate shall include all material, labour, tools, tackles, equipment and machinery supply, sampling, testing etc. all complete.

RCC HUME PIPE (150mm dia.) Class- NP-3 RCC pipe providing supplying of 300 mm dia, CLASS-IRS-NP4 ISI standard. RCC pipe in standard length of following class and diameter. Suitable for either color joints for RCC rig joints incl. transportation, freight charges, loading unloading charges, etc. completed. (IS-458/1989) Rates are including with collar joints and necessary fittings.

RCC HUME PIPE (300mm dia.) Class- NP-3 RCC pipe providing supplying of 300 mm dia, CLASS-IRS-NP4 ISI standard. RCC pipe in standard length of following class and diameter. Suitable for either color joints for RCC rig joints incl. transportation, freight charges, loading unloading charges, etc. completed. (IS-458/1989) Rates are including with collar joints and necessary fittings.

RCC HUME PIPE (600mm dia.) Class- NP-4 Supplying and laying in position of 1200 mm dia RCC Hume pipes, Class- NP-4 with collars conforming to IS:458/1989 for PIPE CULVERTS / DRAINAGE etc. including cutting the pipe if necessary, lowering, laying in position to proper levels, slopes etc., PCC, caulking the joints with spun yarn soaked in neat cement slurry and finishing with cement mortar 1:2 (1 cement: 2sand),CC, curing etc. all complete as per drawings, specifications and directions of Engineer-in-charge. Rate shall include all material, labour, tools, tackles, equipment and machinery supply, sampling, testing etc. all complete.

GI PIPE: 50 mm Dia B-Class Providing and installation of G.I. Pipe B-Class (Medium) as per IS:1239, TATA/ASIAN or any other ISI mark equivalent make including all required G.I. Fittings and specials i.e., bends, tees, crosses, plugs, reducers, cowls, offsets, etc. in pipe ducts, sunken floors, by making cavity in brickwork, RCC work including clamps and hinges, cutting, bending and making threads, etc. and testing of complete installations. Damaged surface shall be properly finished after installation of pipeline with cement mortar/putty/plaster of paris, etc. as per the condition and directions of Engineer In charge. Actual / Net measured length of total pipeline shall be paid.

GI PIPE: 100 mm Dia B-Class Providing and installation of G.I. Pipe B-Class (Medium) as per IS:1239, TATA/ASIAN or any other ISI mark equivalent make including all required G.I. Fittings and specials i.e., bends, tees, crosses, plugs, reducers, cowls, offsets, etc. in pipe ducts, sunken floors, by making cavity in brickwork, RCC work including clamps and hinges, cutting, bending and making threads, etc. and testing of complete installations. Damaged surface shall be properly finished after installation of pipeline with cement mortar/putty/plaster of paris, etc. as per the condition and directions of Engineer In charge. Actual / Net measured length of total pipeline shall be paid.

SOLAR REFLECTOR STUDS : Supply and Installation of approved make and brand Solar road reflectors. Material: PC / aluminum casting, Color: White / yellow / red as directed by EIC.

ROAD REFLECTOR STUDS : Supply and Installation of approved make and brand road reflectors. Material: ABS / PC, Color: White / yellow / red as directed by EIC

75mm Dia B-class pipe : Supply and installation of 75mm NB Dia B-class M.S hollow circular pipe guard with pore with plain CC and top shall cover with MS round cape. The scope shall include fabrication, excavation and cement concrete foundation block of size 300mm x 300mm x 600mm in M-20 concrete work with necessary grouting. Pipe shall paint with one coat of Primer and Two coat of synthetic enamel paint of approved colour and shad. 75mm wide yellow Reflective tape shall past on pipe guard at interval of 300mm etc. all complete as per detail drawing and direction of EIC.

RCC GAS TRENCH : Execution of civil work to construct RCC trench with covers. The scope of work shall includes excavation, min 200mm stone soiling (GSB/WBM as directed by EIC), PCC, RCC M25 or as specified in drg, shuttering, reinforcement, plaster, tiling, angel / channel fixing, MS / FRP cover etc. all complete as specified in drawing as specified in drg and direction of EIC. (1) EXCAVATION: Earthwork and excavation for foundation for trench in all kind of soil, hard murrum, soft rock, hard rock by pneumatic drilling etc. Stacking the excavated earth at least 3mts. away from the edge of foundation trenches and Disposing of the surplus excavated earth and/or debris etc. including loading at site, transporting & disposal, unloading. As per the instructions of the client or consultant. Dewatering if applicable.(2) WBM : 300 MM Th.:-Supplying and laying of 300mm Th. WBM LAYER BASE COURS (1st layer of 150mm th of downgraded stone size 63 to 90 mm and 2nd layer of 150mm th of downgraded stone size 40 to 63 mm) tough, sound, clean and durable including cost of stone aggregates with quarry dust / murrum filling in voids correcting the grade and slope for, all royalties, taxes, handling, transportation to site, unloading the same by the side of the road with all leads and lifts, spreading and laying to form water bound macadam in TWO LAYER of 150mm EACH compacted thickness to proper grade, camber & level, binding the surface with murrum, including the cost of supply of murrum, consolidating with min 10 T Vibro road-roller, watering, with all leads & lifts including preparation of camber below Paver etc. complete as per drawings, specification and direction Engineer-in-Charge (3)P.C.C. : Providing and laying of given thk. of 1:4:8 / 1:3:6 ( cement : coarse sand : M/C graded stone aggregates of 40 mm nominal size) cement concrete in proportion as shown in drg. for all depth and thickness incl. shuttering, centering, ramming tempering and curing etc. P.C.C should completed in proper line and lvl.(4) R.C.C. : Providing and laying pardi and base of proper thickness in cement concrete in 1:1.5:3 M-20 grade/As per shown in drg. including, providing openings, recesses, chamfering, tampering, curing, rendering the surface to give a smooth and even surface etc. all complete. Scope shall include supply and installation of form work and reinforcement etc. all complete with Tools and Tackles and curing.(5)BRICK WORK: Brick work using common brunt clay conventional building bricks, having crushing strength not less than 35 kg/sq. cm. for any structures at any depth in C.M. (1:6) including water curing, scaffolding etc. complete, as per drawing, details and as directed.(6)Plaster: 12 mm thick Cement plaster in 1:4 ( 1 cement : 4 fine sand ) on internal walls of trenches with necessary proposition of base surfaces, hacking the Brick masonry or RCC Surface, The plaster surface shall be rubbed with iron plate till the surfaces become smooth, etc. all complete with Tools and Tackles and curing. The work shall be in line and level. Plaster to make even finish at all height as per direction of engineer in Charge (7)FABRICATION: Providing, Fabricating, erecting & fixing in position in trenches like plates, angles etc. of various sizes and other structural steel sections conforming to IS 2062 including straightening, cutting, fabricating, welding, bending to shape, bolting, fixing in position, welding to insert plate, embedding in wall / concrete and finished the surface neat after grouting. Rate shall include for painting with two coats 50 micron DFT for Each Coat of synthetic enamel paint over a coat of 50 micron DFT for Zinc chromate primer, etc. complete, as directed. as per detail drawing.(8)C-GRADE GLAZED TILES: Providing and fixing of "C" grade glazed tiles in all trenches in proper line and level, as per located in drawing of approved equivalent make in white colour laid over 10mm thick bed of cement mortar 1:3 (1 cement, 3coarse sand) and joints to be filled in white cement to make complete.(8)TRENCH COVERS: Providing & fixing MS Plate/ Chequered Plate / Pipe section cover as per detail drawing, specifications & utility installations including MS Angle frames & all fabrication works as required & as direction of Engineer In charge. Rate shall include for painting with two coats 50 micron DFT for Each Coat of synthetic enamel paint over a coat of 50 micron DFT for Zinc chromate primer, etc. complete, as directed. GI/ RCC HUME PIPE for Cable: The required GI/PVC Conduiting pipes-Heavy duty shall be provided by civil contractor as per approved drawing issued y IOAGL Gas.

RCC ELECTRICALTRENCH : Execution of civil work to construct RCC trench with covers. The scope of work shall includes excavation, min 200mm stone soiling (GSB/WBM as directed by EIC), PCC, RCC M25 or as specified in drg, shuttering, reinforcement, plaster, tiling, angel / channel fixing, MS / FRP cover etc. all complete as specified in drawing as specified in drg and direction of EIC. (1) EXCAVATION: Earthwork and excavation for foundation for trench in all kind of soil, hard murrum, soft rock, hard rock by pneumatic drilling etc. Stacking the excavated earth at least 3mts. away from the edge of foundation trenches and Disposing of the surplus excavated earth and/or debris etc. including loading at site, transporting & disposal, unloading. As per the instructions of the client or consultant. Dewatering if applicable.(2) WBM : 300 MM Th.:-Supplying and laying of 300mm Th. WBM LAYER BASE COURS (1st layer of 150mm th of downgraded stone size 63 to 90 mm and 2nd layer of 150mm th of downgraded stone size 40 to 63 mm) tough, sound, clean and durable including cost of stone aggregates with quarry dust / murrum filling in voids correcting the grade and slope for, all royalties, taxes, handling, transportation to site, unloading the same by the side of the road with all leads and lifts, spreading and laying to form water bound macadam in TWO LAYER of 150mm EACH compacted thickness to proper grade, camber & level, binding the surface with murrum, including the cost of supply of murrum, consolidating with min 10 T Vibro road-roller, watering, with all leads & lifts including preparation of camber below Paver etc. complete as per drawings, specification and direction Engineer-in-Charge (3)P.C.C. : Providing and laying of given thk. of 1:4:8 / 1:3:6 ( cement : coarse sand : M/C graded stone aggregates of 40 mm nominal size) cement concrete in proportion as shown in drg. for all depth and thickness incl. shuttering, centering, ramming tempering and curing etc. P.C.C should completed in proper line and lvl.(4) R.C.C. : Providing and laying pardi and base of proper thickness in cement concrete in 1:1.5:3 M-20 grade/As per shown in drg. including, providing openings, recesses, chamfering, tampering, curing, rendering the surface to give a smooth and even surface etc. all complete. Scope shall include supply and installation of form work and reinforcement etc. all complete with Tools and Tackles and curing.(5)BRICK WORK: Brick work using common brunt clay conventional building bricks, having crushing strength not less than 35 kg/sq. cm. for any structures at any depth in C.M. (1:6) including water curing, scaffolding etc. complete, as per drawing, details and as directed.(6)Plaster: 12 mm thick Cement plaster in 1:4 ( 1 cement : 4 fine sand ) on internal walls of trenches with necessary proposition of base surfaces, hacking the Brick masonry or RCC Surface, The plaster surface shall be rubbed with iron plate till the surfaces become smooth, etc. all complete with Tools and Tackles and curing. The work shall be in line and level. Plaster to make even finish at all height as per direction of engineer in Charge (7)FABRICATION: Providing, Fabricating, erecting & fixing in position in trenches like plates, angles etc. of various sizes and other structural steel sections conforming to IS 2062 including straightening, cutting, fabricating, welding, bending to shape, bolting, fixing in position, welding to insert plate, embedding in wall / concrete and finished the surface neat after grouting. Rate shall include for painting with two coats 50 micron DFT for Each Coat of synthetic enamel paint over a coat of 50 micron DFT for Zinc chromate primer, etc. complete, as directed. as per detail drawing.(8)C-GRADE GLAZED TILES: Providing and fixing of "C" grade glazed tiles in all trenches in proper line and level, as per located in drawing of approved equivalent make in white colour laid over 10mm thick bed of cement mortar 1:3 (1 cement, 3coarse sand) and joints to be filled in white cement to make complete.(8)TRENCH COVERS: Providing & fixing MS Plate/ Chequered Plate / Pipe section cover as per detail drawing, specifications & utility installations including MS Angle frames & all fabrication works as required & as direction of Engineer In charge. Rate shall include for painting with two coats 50 micron DFT for Each Coat of synthetic enamel paint over a coat of 50 micron DFT for Zinc chromate primer, etc. complete, as directed. GI/ RCC HUME PIPE for Cable: The required GI/PVC Conduiting pipes-Heavy duty shall be provided by civil contractor as per approved drawing issued y IOAGL Gas.

ELECTRICAL CHAMBER- 450 X 450 X 450/600 MM Construction of brick wall chamber / pit for electrical pit / earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8), RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

ELECTRICAL CHAMBER: 600 x 600 x 600mm Construction of brick wall chamber / pit for electrical pit / earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8), RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

ELECTRICAL CHAMBER: 750 x 750 x 600mm Construction of brick wall chamber / pit for electrical pit / Earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8), RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

ELECTRICAL/EARTHING CHAMBER: 450 x 450 x 450mm Construction of brick wall chamber / pit for electrical pit / Earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8), RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

WATER CHAMBER: 450 x 450 x 600mm Construction of brick wall chamber / pit for electrical pit / Earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8), RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

WATER CHAMBER : 600 x 600 x 600mm Construction of brick wall chamber / pit for electrical pit / Earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8), RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

WATER CHAMBER: 750 x 750 x 600mm Construction of brick wall chamber / pit for electrical pit / Earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8), RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

MANHOLE: 600 x 600 x 900mm Constructing Manhole chamber with R.C.C. top slab in 1:1.5:3 mix (1-cement :1.5-coarse sand : 3-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900x900x600/900mm including heavy-duty FRC cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg. With 230mm thick walls of brick masonary using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand). Scope shall include excavation, PCC, RCC, reinforcement, brick work, plaster finish, S&I of heavy duty FRC cover with frame etc. all complete as per design drawing, specification and direction of EIC/consultant. Chamber Dimensions shall measure in to in.

MANHOLE: 900 x 900 x 600/900mm Constructing Manhole chamber with R.C.C. top slab in 1:1.5:3 mix (1-cement :1.5-coarse sand : 3-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900x900x600/900mm including heavy-duty FRC cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg. With 230mm thick walls of brick masonary using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand). Scope shall include excavation, PCC, RCC, reinforcement, brick work, plaster finish, S&I of heavy duty FRC cover with frame etc. all complete as per design drawing, specification and direction of EIC/consultant. Chamber Dimensions shall measure in to in.

MANHOLE: 2000 x 2000 x min 2000mm Constructing Manhole chamber with R.C.C. top slab in 1:1.5:3 mix (1-cement :1.5-coarse sand : 3-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 2000 x 2000 x min 2000mm including heavy-duty FRC cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg. With 230mm thick walls of brick masonary using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand). Scope shall include excavation, PCC, RCC, reinforcement, brick work, plaster finish, S&I of heavy duty FRC cover with frame etc. all complete as per design drawing, specification and direction of EIC/consultant. Chamber Dimensions shall measure in to in.

FELLING TREES: Felling trees of the girth (for any height/level above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material.

DISMANTALING RCC WORK : Demolishing & Breaking of Reinforced cement concrete including plaster / tiling if available on it, at all depth/height and levels including cutting of reinforcement manually or by any other means (taking all necessary safety precautions) including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. , cutting, straightening, scraping & cleaning of reinforcement bars, stacking of serviceable material, disposal of unserviceable material away and outside the IOAGL boundary limits irrespective of lead involved by means of mechanical transport or any other equivalent means, keeping IOAGL indemnified of any liabilities from statutory / local bodies, all complete as specified & directed. Rate shall also includes removal of existing plaster / tiling, manhole covers, trench frame & guide angles, other embedded structural items in RCC and stacking the same for further use and exposed surface shall finish with plastering etc. all complete. (Excavation & Backfilling shall be paid separately under relevant items).

DISMANTALING BRICK WORK : Demolishing & Breaking of Brickwork and stone masonry includes plaster / tiling applied over it (taking all necessary safety precautions) including supply of all tools & tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material away and outside the IOAGL boundary limits irrespective of lead involved by means of mechanical transport or any other equivalent means, keeping IOAGL indemnified of any liabilities from statutory / local bodies, all complete as specified & directed. Rate shall also includes removal of existing tiling, plaster, manhole covers, trench frame & guide angles, other embedded structural items in RCC/brick work and stacking the same for further use and exposed surface shall finish with plastering etc. all complete. (Excavation & backfilling shall be paid separately under relevant items).

DISMANTALING OF STEEL WORK : Dismantling Bolted / welded structural steel work of all type MS members including barbed wire / wiremesh fencing including dismantling fencing posts, poles, angles, channels and making rolls of wire etc. all complete, manually or by any other means taking all necessary safety precautions including supply of all tools & tackles and equipment as required, consumables, necessary scaffolding etc., providing temporary bracings as required, cutting (by flame or saw as directed) gusset plates, bolts, nuts, welding etc. all complete at all depths and heights as specified and directed. Stacking of serviceable material, disposal / scrapping of unserviceable material away and outside the IOAGL boundary limits irrespective of lead involved by means of mechanical transport or any other equivalent means, keeping IOAGL indemnified of any liabilities from statutory / local bodies, all complete as specified & directed.

Canopy Roofing: Providing and fixing Canopy roofing 0.5 mm Trapezoidal profile high tensile precoated G.I. steel sheets (fy= 550 mps) having profile depth of 28-32 mm and pitch of 186-250 mm with zinccalume coating 150 gsm and 35 microns super polyester colourbond XRW quality paint system, compatible flashing, fittings E. and fixtures and erecting them on roof/ sides using self drilling, self tapping fasteners at proper positions, minimum overlapping required is 300 mm, water test, all work as per specifications by consultant. Supplying and fixing Plain G.I. sheet flashing 20SWG thick with G.I. 'J' or 'L' hooks ; G.I. limpet and Bitumen washer complete. silicon filling for water proofing 20 gauge sheets. Bond to be provided for water proofing of canopy.visible area shall be calculated for final measurement.

Canopy G.I Gutter: Providing and fixing GI Sheet gutter (made from 16 SWG sheets as per required size or as specified ; in rectangular/Trapezoidal shape/as required with runner/purlins/base structure with adequate framing/GI nut bolts/bitumen washers etc. including providing foam fillers/bitumen adhesive taping/silicon injection so as to make the total surface water tight including making connection to down take pipe complete. fixed with G.I. 'J' or 'L' hooks and flat iron clamps complete. visible area shall be calculated for final measurement.

False Ceiling: The Luxalon or equivalent exterior 150F ceiling system shall consists of 150 mm wide aluminum panels which can simply be clipped into the prongs of a 150F carrier. The stove enameled aluminum panels shall recyclable, lightweight and strong. The panels shall supply in any length upto 6000mm. Panels shall join by using the panel splice. The carrier shall black, made of 0.95mm thick (for 150F) stove enameled aluminum and should provided with prongs to accommodate the panels. Carriers should have a standard length not less than 5000 mm and to be connected by using the carrier splice by sliding the ends of the carriers into each other (150F). The carriers shall be suspended at centers determined by the wind loading graphs using a rigid leveled suspension system. It shall Designed to withstand positive and negative wind loads. Utilize the washer set to isolate dissimilar metals. Carrier spacing (panel span) and carrier span (hanger wire and rigid support spacing) varies depending on design wind pressure (pounds per square foot). As a general guide. The wind load P.S.F. 35, panel span 29” rigid support spacing 20” & for P.S.F. 40, panel span 26", rigid support spacing 20". mention wind load, panel span and support spacing is based on using 3 or more rows of carrier, and is not valid if 150F panel is attached to less than3 carriers. Maximum panel overhang = 6". Maximum carrier overhang = 6". Hanger wire (min. 12 ga.) must be located at each compression strut. Compression strut (1 1/2"16 ga. CRS "c" channel shown) must not exceed spacing shown above for a given design wind pressure Maximum strut length for 1 1/2" 16 ga. CRS "c" channel is 28". Hanger wire and Compression strut must be attached to structure above to safely support all loads imposed officiate system. Attachment to structure above designed and provided by others. visible area shall be calculated for final measurement.

Canopy Lane signage: Supply and Erection of Lane signageas per branding document with ACP box along with white acrylic box all sides of ACP box and oxford blue acrylic cut through ACP box complete with 150 mm D MS pipe support painted with MRF PU silver metallic paint as per scope of work, detailed drawings and technical , 6 nos or as per IOAGL required specifications with all necessary structure and fittings.

CANOPY ACP: P & F of 4mm thickness,foil thichness 0.5mm Th, ACP of exterior type of approved make with warranty, PVDF coating, UV resistance, fire rated (EN13501-1-B1 Grade, BS476 - Part 6 & Part 7), Corrosion resistance, including MS framework (box pipe size 25x50mm (or as approved by Civil EIC) with max spacing 600mm c/c) where ever required, scaffolding etc. complete for Canopy facia & columns. Scope shall include supply and fixing ACP with framework suggested or approved by EIC or architect and as per detailed drawing with cutting, bending and fixing in true line & shape with screw at every 9" distance and filling up joints or groves with approved / suggested black / Transparent / approved colour silicone as directed by architect / EIC. ACP colour shall match with IOAGL branding colour. Other than listed approved ACP make, if IOAGL required colour is available in other make needs to be get approved from IOAGL EIC based on manufacturing technical data sheet and assurance for required warranty. IOAGL shall reserve rights to approve the make matching with their branding colour..

Canopy Branding : Supply and Installing of canopy facia sinages, includes approved colour printing and pasting of cut/printed vinyl work at all four side of facia and LED backlit "ADANI GAS" & "CNG" or "LNG" embossed letters at three sides of Facia & at one side cut vinyle font as per the specification and size as per the branding documents approved by client. Etc all complete. Acrylic Letters : LED backlit Supply and Installation of 75-80mm embossed front glow LED backlit Acrylic letters "ADANI GAS" & "CNG" of required size and shape, easy to maintain and water tight as per the specification and size as per the branding documents approved by client etc. all complete. Sufficient number of LED lights to be provided so that uniform glow may appear from letters. LED light should be 0.7W, 5years warranty with 10years self life of Korean make /(Samsung Geo Q), GE or as approved by EIC to be used and Scope shall include fixing and installation of the letters on Canopy Facia / Monolith / Office building or any structure as suggested and directed by IOAGL including necessary electrification work using approved make FRL/FRLS wire and connectors to connect with main power line all complete. Vendor to arrange and use necessary scaffolding, tools tackles, safety belt, PPE as per IOAGL safety standards. Longer side of the individual font/logo part shall considered for payment measurement.

GI Sheet : Plain 16 Gauge Providing and Fixing of plain M.S. sheet including cutting and bending into profile, welding, riveting, bolting with other structural items at site, including providing foam fillers/bitumen adhesive taping/silicon injection etc. all complete as per approved drawing and directions of Engineer-in-charge. Actual/Net quantities measured shall be paid.

CANOPY GLOW SIGN LOGO Supply and Installing projected acrylic Backlit letters 2" embosed 2' in Ht. with neon white back light as per scope of work, detailed drawings and technical specifications including all necessary fittings. With Providing & Fixing Neon Transformer at LOGO & Monolith as per specification & instruction by site in charge

LANE SIGNAGE Supply and Eraction of Lane signage of 1200 x 450 x 300 mm with ACP box of Blue and Green color along with white retro reflective vnyl on ACP box complete with as per scope of work, detailed drawings and technical specifications with all necessary structure and fittings.

ENTRY/EXIT SIGNAGE Supply and Eraction of Lane signage of approved size with ACP box of Blue and Green color along with white retro reflective vnyl on ACP box complete with 150 mm D MS pipe support painted with MRF PU blue paint in match with blue ACP as per scope of work, detailed drawings and technical specifications with all necessary structure and fittings.

MONOLITH - As per approved deisgn. With Providing & Fixing Neon Transformer at LOGO & Monolith as per specification & instruction by site in charge

Providing & Fixing Sun Light Protective Glass Film as per Specifications & Instruction by Site In charge

SCHEDULE OF RATE - ELECTRICAL WORKS

SUB STATION EQUIPMENT, PANELS & SUBSTATION ACCESSORIES

DIESEL GENERATOR SET Installation,Testing & Commissioning of 40 KVA Diesel Generator Set as shown in the drawing, specification as per the instruction of engineer-in-charge and as per the instruction manual of the manufacturer. The unit rate shall include loading / unloading, shifting from site store to the place of installation ,positioning on readymade platform ,assembling of loose accessories supplied by the manufacturer, wiring & connection of auxiliary circuits, installation, testing & commissioning of control Panel and supply of all necessary hardware.

DIESEL GENERATOR SET AMF LOGIC PANEL Installation,Testing & Commissioning of Diesel Generator Set AMF WITH LOGIC panel suitable for 40 KVA Diesel Generator Set as per Drawing, specification, as per instruction manual of the manufacturer & as per instruction of engineer-in-charge. The unit rate shall include loading / unloading, shifting from site store to the place of installation, positioning on readymade Cable trench (grouting of "C" chanel for panel mounting), assembling of loose accessories supplied by the manufacturer, wiring & connection of auxiliary circuits, installation, testing & commissioning of AMF Panel, interlocking with Main L.T. Panel and supply of all necessary hardware.

FABRICATION WORK Supply, Installation, testing & commissioning of fabrication of M.S. Material of standard sizes like ISMC 150, ISMC 125, ISMC 100, ISMC 75, ISMA 65x65x6, ISMA 50x50x6, ISMA 35x35x5, M.S. strips, square/rectangular/circular hollow tube/pipe of approved supplier of client / consultants / architect etc. including Fabrication of cable tray supports, Painting of supports by two coats of red oxide followed by two coats of sprayed enamel paint, Installation of steel supports including using of fasteners, hardware as per drawings, specification, instruction of Engineer-in-charge and as per the instruction of the manufacturer.

Supply & fixing of checkered plate (10mm Thick) including two coats of red oxide followed by two coats of enamel sprayed paint as per drawings.

S.I.T.C Steel section of 100x50x6 for Electrical equipment installation.

PANELS Supply, Installation, testing & commissioning of compartmentalized type powder coated Power & Lighting Distribution boards as per Drawing, Specification. The unit rate shall include loading/unloading, shifting from site store to the place of installation, assembling the Panel including mounting & wiring of loose parts by manufacturers, interconnection of shipping sections, installation on readymade Cable trench (provide support for panel mounting) or directly on floor, assembling of loose accessories supplied by the manufacturer, wiring & connection of auxiliary circuits, installation, testing & commissioning of all Panel, interlocking with AMF Panel and supply of all necessary hardware. Aligning, levelling, grouting, testing and setting of relays and meters including all hardware.

MAIN LT PANEL (AS PER SLD)

LIGHTING PANEL (AS PER SLD)

SUBSTATION ACCESSORIES Supply, installation, testing & commissioning of following accessories along with necessary hardware, fixing brackets.

1.1KV grade, 900mm wide, 9mm thick rubber insulating mat

1.1 KV grade, ISI marked hand gloves

9 Kg.Carbon dioxide portable fire extinguisher with necessary clamps & supports.

First aid Box

S & I of electric shock treatment chart duly framed with glass covered and mounting arrangment.

Sand bucket (4NOS) with stand

Warning signs

Supply of Aluminium ladder for 9 Mtrs. height complete with castors for movability and easy access for maintannce .

Supply of M.S. pipe made ladder for 6 feet height complete with Painting and wooden steps.

UPS SYSTEM & SERVO VOLTAGE STABILISER Supply, Installation, testing & commissioning of UPS systems with its separate battery rack as per Drawing, Specification. The unit rate shall include loading/unloading, shifting from site store to the place of installation, assembling the UPS/battery rack including mounting & wiring of loose parts by manufacturers, interconnection of batteries, installation on readymade false floor/trench/ floor, aligning, levelling, grouting, testing and setting of relays and meters including all hardware.

S.I.T.C of 3phase input & 3phase output 2kVA – 1phase input & 1phase output - 2 No. with Parallel Operation with INBUILT ISOLATION TRANSFORMER (Online ups Unbalance type), with proper alignment & Support with 1 hr full load bettry back up.complete with c/o swtch and interlocking to function either off ups.

S.I.T.C. of battery rack & battery with proper alignment & support.

S.I.T.C OF 20 KVA SERVO VOLTAGE STABILISER

CABLING MEDIUM VOLTAGE CABLES S.I.T.C of XLPE Insulated 1100V Grade ,steel armoured Aluminium/Copper conductor cable (as per IS 7098 Part I) With FRLS PVC Sheath ;of following sizes & type surface trench/on wall/structure surface/in G.I Pipes/conduit as specified (Refer SLD& Cable routine plan) Proper cable dressing, cable clamping, cable tag inditification both ends, cable tag & cable clamping with Al/GI strip. inclusive all test before and after laying of cable .

3.5 Cx 35 sq.mm. AL. XLPE armoured cable

4.0 Cx 10 sq.mm. XLPE Armoured copper cable

4.0 Cx 6.0 sq.mm. XLPE Armoured copper cable

4.0 Cx 4.0 sq.mm. XLPE Armoured copper cable

4.0 Cx 2.5.0 sq.mm. XLPE Armoured copper cable

3.0 Cx 4.0 q.mm. XLPE Armoured copper cable

3.0 Cx 2.5 q.mm. XLPE Armoured copper cable

S.I.T.C .1C X 25 SQ.MM Flexible cu wire

S.I.T.C. 1C X 4 SQ.MM Flexible cu wire

Excavation for soft soil , back filling and leveling etc complete for earthing strip,Cablelaying,GI puipe laying if necessary.

Excavation in hard soil,Road Cuttingfor cable laying,GI pipe laying, Earthing strip laying

PIPES & CABLE TRAY Supply & laying of G.I Pipes (of medium grade)buried/embedded into excavated ground complete with all accs. following sizes.

50 mm dia. PVC conduit

25 mm dia. PVC conduit

300 mmW X 50mm height x2 mm Thik G.I Performade tray with Cover

150 mmW X 50mm height x2 mm Thik G.I Performade tray with Cover

CABLE CONNECTIONS & TERMINATIONS Supply, Connections & Termination of Medium voltage XLPE insulated cables as per the specification & instruction of Engineer-in-charge. The unit rate shall include supply & connection of adequate size wetherproof double compression type brass cable glands and tinned copper / AL. lugs including cutting/stripping of cable insulation, fixing of cable glands, crimping the lugs, connection of cable armour with earth bar, necessary tools,hardware,PVC insulated tape and all other material required.

3.5 Cx 35 sq.mm. AL. XLPE armoured cable

4.0 Cx 10 sq.mm. XLPE Armoured copper cable

4.0 Cx 6.0 sq.mm. XLPE Armoured copper cable

4.0 Cx 4.0 sq.mm. XLPE Armoured copper cable

4.0 Cx 2.5.0 sq.mm. XLPE Armoured copper cable

3.0 Cx 4.0 q.mm. XLPE Armoured copper cable

3.0 Cx 2.5 q.mm. XLPE Armoured copper cable

S.I.T.C .1C X 25 SQ.MM Flexible cu wire

S.I.T.C. 1C X 4 SQ.MM Flexible cu wire

Supply, Installation, testing & commissioning of Earthing system with Pipe-in-pipe technology. Two B class IS mild steel pipes, one inside the other, hot dip galvanized with 100 micron coating outside and about 300 micron coating inside, filled with high conductive and corrosion resistant crystalline mixture and Backfill Compound around electrode. The unit rate shall also include making earthing chamber with MS cover at Ground level and providing earthing terminal to test earthing of each pit seperately

Model T-19 ( 50mm dia 3 meter is used in place of the conventional GI earthing )

Model T-39 ( 80 mm dia, 3 meter is used in place the conventional copper earthing )

EARTHING STRIP

50 mm x 6 mm G.I Earthing strip

25 mm x 3 mm G.I Earthing strip

Earthing Link (50mm x 6mm - Lenght 300mm GI) as per drawing

25 mm x 6 mm Copper Earthing strip

25 mm x 3 mm Copper Earthing strip

INTERNAL WIRING

MCB DISTRIBUTION BOARD

Supply, installation, testing & commissioning of Three Phase/ Single Phase, Double Door type, powder coated readymade type Distribution Boards IP 43 grade, PPI type and Flexy Distribution board as per drawings & specifications. The unit rate shall include supply & fixing on wall / column, checking of wiring, connection and operation of MCBs and supply of necessary hardware.

MAIN LIGHTING DISTRIBUTION BOARD (MLDB)

TPN 12 Way Distribution Board. Incoming : 40A FP MCB Outgoing : 3 # 40A DP ELCB (100mA) & 15 # 6-32A DP MCB

TPN 8 Way Distribution Board. Incoming : 40A FP MCB Outgoing : 3 # 40A DP ELCB (30mA) & 9 # 6-32 A DP MCB

2 RAW (14WAY) FLEXY Distribution Board. Incoming : 25A DP ELMCB (100mA) Outgoing : 8 # 10A SP MCB

20 A Singal Phase Metal Clad Socket with 20A DP MCB

LIGHT POINT WIRING Supply, installation, testing & commissioning of Point wiring as per Drawing, Specification & as per the instruction of engineer-in-charge. The unit rate for Light / Fan / plug point shall include supply & Laying of 25 mm dia MMS PVC conduit & accessories in slab / flooring / false ceiling, 2 # 2.5 SQ.MM & 1 # 1.5 SQ.MM copper flexible FRLS wires as a mains wiring from DB to Switch board and 3 # 1.0 sq.mm Copper flexible FRLS wires as an off Wiring from Switch board to first light point (PRIMARY) in 25mm Dia. PVC conduit & further each looped light point shall be considered as SECONDARY point in 25mm dia. PVC conduits. Wiring shall be done in Color coding only. (The point shall be measured from distribution board and no extra payment on account of circuit mains is payable)

Primary light point control by one 6A Switch.

Secondary light point control by one 6A Switch.

Two way light point control by two two way switch

One Ceiling fan controlled by 1 switch & electronic regulator

Exaust fan controlled by one switch.

5A plug point controlled by one switch on SB

5A plug point controlled by one switch separate

POWER PLUG POINT WIRING Supply, installation, testing & commissioning of 15A Plug Point wiring as per Drawing, Specification & as per the instruction of engineer-in-charge. The unit rate for plug point shall include supply & Laying of 25 mm dia MMS PVC conduit & accessories in slab / flooring / false ceiling with 2 # 4 SQ.MM. & 1 # 2.5 SQ.MM. copper flexible FRLS wires as a mains wiring from DB to 15A plug point in 25mm Dia. PVC conduit.

15A plug point controlled by one 15A switch -PRIMERY

15A plug point controlled by one 15A switch - SECONDERY

Supply, installation, testing & commissioning of 15A Plug Point wiring as per Drawing, Specification & as per the instruction of engineer-in-charge. The unit rate for plug point shall include supply & Laying of 25 mm dia MMS PVC conduit & accessories in slab / flooring / false ceiling with 2 # 4 SQ.MM. & 1 # 2.5 SQ.MM. copper flexible FRLS wires as a mains wiring from DB to Power point with 20A ,ON/OF push button with startertype switch & socket.Power point 20A ,3pin socket and controlling 20A Switch mounted separately in 25mm Dia. PVC conduit.

20A ,ON/OF push button with startertype switch & socket.Power point 20A ,3pin socket and controlling 20A Switch mounted separately

COMPUTER POWER POINT WIRING SITC of Computer power point wiring in 25mm dia. PVC conduit as per drawing, specification and as per the insturction of Engineer-in-charge.Wire size for computer power point shall be 2#2.5 sq.mm and 1#1.5 sq.mm copper flexible FRLS wires in 25mm dia. Pvc conduit. The unit rate shall comprise of mains wiring from UPS distribution board to first Computer Point (PRIMARY) & further each looped Computer point shall be considered as SECONDARY. Computer power point consist of supply, installation testing and commissiong of 3#6A plug point (below table) control by 1#16A switch (above table). Rate for switch, box and plate should also be included in unit rate including mains.

Primary Power Point (3#5A Plug & 1#15A Switch)

Secondary Power Point (3#5A Plug & 1#15A Switch)

LIGHT FIXTURE INSTALLATION Supply, Installation, testing, Connection & commissioning of Light Fixture as per specification and drawings.The unit rate shall include supply, assembling, marking of light fixture at false ceiling, mounting / hanging of fixture with chain / MS pipe on slab / wall / walk-on ceiling / false ceiling.

Supply,Installation,testing and commissioning of 20w Led tube light Fixture

Supply,Installation,testing and commissioning of 40w Led 2'X2' light Fixture

Supply,Installation,testing and commissioning of 125w LED WELL GLASS Flam Proof Light

Supply,Installation,testing and commissioning of 150w LED FLOOD light Fitting

Supplay,Installation,testing and commissioning of 40w Led tube light Fixture

Supply,Installation,testing and commissioning of 18W LED down light SM/RM

Supply,Installation,testing and commissioning of 9W LED wall light fixture.

Supply,Installation,testing and commissioning of 9-11W LED wall light fixture. (out door type)

50w-1200 mm Sweep Ceiling Fan (CG HS PLUS WHITE)

Exhaust Fan Point (300mm dia.)

fan rod of 450mm length

Anchor Fastner for fan

LIGHTING POLE AND JUNCTION BOX S.I.T.C of Steel tubular pole (swaged) confirmiry IS 2713 (part-II) 1980 designated 410 SP-25 manufacture of steel tubes can be permitted manually by are welding process or allow to coufirm as IS Specification of steel tubes of following dimensions swaged to gather complete painted with one coat of red oxide and two coats of Aluminium paint erected with metalic base plate 300mm x 300 mm x 4mm thick steel tubular pole should be ISI mark Tata/Asian/jindal/Surya.make. Over all length 9.00 Mtr Approximate wt of pole 78kg within permissible limits as per IS. Effective length of section as: Bottom : 5 mt having out side dia 114.3 mm x 3.65 mm wall Thickness. Middle : 2.0 mt having O.D.88.9mm x 3.25mm Thickness TOP.2.mt having O.D.76.10 mm x 3.25 mm thickness.

3 way Flam proof junction box (2 incomming cable & 1outgoing cable)

Wether proof junction box (2 incomming cable & 1outgoing cable)

Supplying and erecting LED Solar street lights with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge controller with 12 hours automatic switch on/off with wind speed resistance 44 m/s as per IEC 61215 36W,3000 lumens, IP-65, PV Module – 2x100W and 6 mtr poles complete erected

COMPUTER & TELEPHONE POINT WIRING COMPUTER DATA POINT WIRING Supply & laying of CAT-6 networking cable in Existing 25/32/50 mm dia. PVC conduit concealed in wall / in floor or in slab or in cable tray (maximum 3 # CAT-6 in one 25mm dia. conduit to be considered). Rate of 25/32/50 mm dia. PVC conduits should not be included in unit rate.

Supply, installation, testing & commissioning of Computer point. The unit rate for point shall include with connection, RJ 45 data outlet with box, plate & socket as per drawing, specification & as per the instruction of engineer-in-charge.

TELEPHONE POINT WIRING Supply, laying & connection of CAT-6 Telephone cable in existing 25/32/50 mm Dia. MMS PVC conduit. (maximum 3 CAT- 6 in one 25 mm pipe).The unit rate shall include rate of Supply, Laying of wires. Rate of 25/32/50 mm dia. Conduits should not included in unit rate.

Supply, Installation, Testing & Commissioning of Telephone tag box as per drawing, specification & as per instruction of engineer in charge in concealed in wall.

10 pair telephone tag box with krone connector

20 pair telephone tag box with krone connector

Supply Installation, testing & commissioning of Telephone point. The unit rate for point shall include supply & installation of RJ 11 Telephone outlet, box, plate & socket as per drawing, specification & as per the instruction of engineer-in-charge. Rate for Supply of RJ11 data outlet with box, plate & socket should also be included in unit rate.

CCTV CAMERA SYSTEM Supply, Installation, Testing & Commissioning of IP Network Dome Camera, Min. Illumination required 0.1 lux @ F1.4 (color), Min. Pixels 2560 × 1440, triple stream, 3.6/4/6 mm lens, IR with upto 20 m IR distance, Alarm: 2 In/ 1out, PoE, H.264 High Profile , Having Operating temp range : –10°C to 50° C. Certifications: ONVIF Profile S, compliant, UL compliant. with all mounting assoseries. Make - Honeywell -H2/H4W4PRV3 and equivellent model of Bosch, Sony, Pelco, Axis. (Note - Power supply for one camera connected with fiber will be in contractor scope if required.)

Supply, Installation, Testing & Commissioning of IP Network Bullet Camera, Min. Illumination required 0.1 lux @ F1.4 (color), Min. Pixels 2560 × 1440, 4MP,triple stream, IP66 rated, 2.7–12 mm motorized focus & zoom lens, IR with upto 50-60 m IR distance, , 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile , Having Operating temp range : –10°C to 50° C. Certifications: ONVIF Profile S, compliant, UL compliant with all mounting assoseries. Make - Honeywell -HBW4GR1V and equivellent model of Bosch, Sony, Pelco, Axis. (Note - Power supply for one camera connected with fiber will be in contractor scope if required.)

Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR PTZ Camera with auto tracking, 1/1.9" CMOS, 2 MP @ 25fps, triple stream, Min. Illumination required 0.005 lux @ F1.6 (color) & 0.0005 lux @ F 1.6(B/W), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 6mm –180 mm 30x motorized focus & zoom lens, BLC, HLC, 3DNR, Defog, Electronic Image Stabilitzation, Privacy Mask, IR range with upto 200m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 7 In/ 2 out, PoE, H.264 High Profile and MJPEG, PoE Class 5 and 12V DC/24VAC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 70° C. Certifications: ONVIF Profile S compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant. with all mounting assoseries. Make - Honeywell -HDZ302LIK and equivellent model of Bosch, Sony, Pelco, Axis. (Note - Power supply for one camera connected with fiber will be in contractor scope if required.)

OPERATIONAL Manager Work Station , Make: Dell/HP/IBM

40 Inch Wall Monitor, LCD/LED,Make: Samsung / LG/Sony

SITC of Network Video Storage : 32 channels 720P / 1080P resolution video recording at real time with 16 TB HDD and Support atleast 32TB in single sever for 30 days. Make Honeywell - HEN32304 and equivelent makes of Bosch, Sony, Pelco, Axis.

Supply & laying of CAT-6 networking cable in Existing 25/32/50 mm dia. PVC conduit concealed in wall / in floor or in slab or in cable tray (maximum 3 # CAT-6 in one 25mm dia. conduit to be considered). Rate of 25/32/50 mm dia. PVC conduits should not be included in unit rate. Make - Tyco,Dlink,Legrand

24 Port 10/100/1000 Tx Base POE Switch with fully loaded 24 port patch panel, 24 patch cord and all Required Accessories. Make - Cisco, HP, Avaya.

15U Rack for mounting switches, NVR and LIU at control room. Make - Dlink, Rittal, APC

Data Networking - Fiber Optic Cable and Components

Supplying and Laying outdoor six core single mode fiber optic cable for outdoor connectivity where ever required in prelaid conduits / RCC hume pipes/HDPE/DWC, whichever maybe available. Make - Tyco,Dlink,Legrand

Supplying and Laying indoor six core single mode fiber optic cable for indoor connectivity where ever required in prelaid conduits / RCC hume pipes/HDPE/DWC, whichever maybe available. Make - Tyco,Dlink,Legrand

Supply, Installation, Testing & Commissioning/Termination of wall mounted LIU for optical splicing/termination of 6 cores of single mode mode fiber optic cable as per design specifications. It shall be complete with adaptor panels, SFP module,adaptors for using LC type termination. Masking/blanking/dustcover for unused/unmounted adaptor ports, inclusive of all mechanical accessories. Make - Tyco,Dlink,Legrand

Media converter at camera end with IP rated enclosure for outdoor application. Make - Tyco,Dlink,Legrand

Bidder Name

Amount in Words

Aditi Solar Private Limited

TECHNO GLOBAL SERVICES PVT LTD

Brothers Engineering Contractors

Amity Projects & Construction

PETROMEC ENGINEERS

Brothers Engineering Contractors

Amity Projects & Construction

TECHNO GLOBAL SERVICES PVT LTD

Aditi Solar Private Limited