Loading
Loading…
Loading…
Tender Value
₹50.7 L
EMD Value
₹1.0 L
Closing Date
22 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTENANC
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected.
Similar Nature of Work: Supply, installation, testing and commissioning of LT/HT electrical GS assets ORSupply, installation, testing and commissioning of electrification or rewiring of building/workshop. ORSupply, installation, testing and commissioning of Yard/circulating area/street lighting/tunnel/facade lighting. ORSupply, installation, testing and commissioning of high-mast lighting. ORSupply, installation, testing and commissioning of glow signages. ORSupply, installation, testing and commissioning of LT/HT electrical GS sub-station with at least 50% capacity of proposed sub-station ORRepair/overhauling of LT/HT electrical GS assets including LT/HT sub-stations.
50 conditions · 8 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non-submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non- submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affidavit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division-Guntakal: Provision of Electrical Arrangements for Augmentation of Existing Running Room By Constructing Additional Floor on Existing Running Room Annex-II building.
GTL-EM-50-2026-27~SCOR
GTL-EM-50-2026-27
Open
Works - General
9 Months
Anantapur, Andhra Pradesh
₹0
₹1.0 L
30 Sept 2026
30 Sept 2026
8 Oct 2026
181 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 50,65,014.43 | ||
| — | Item Breakup | for details. | — | ||
| Survey, Design, Supply, transportation, installation, testing and commissioning ofdifferent capacity 5 KWp Grid connected rooftop solar plant consisting Framed Dual Glass Mono PERC Bifacial Solar Module Mono PERC -crystalline Panel, Inverter (pure sine wave), with remote monitoring system including SIM with 5 years, net connectivity, fixing structure and all other accessories including Lightening Arrestor, proper earthing, Net Meter and Generator Meter (From DISCOM), Controls and Protections, SinglePhase Preventer, interconnect cables, cable trays for DC cabling , civil works, and switches all complete at stations (COP/ Buildings) as per MNRE Standards and Scope of Work with five-year AMC/CAMC including cleaning. Any charges of electricity board to be borne by contractor regarding metering of solar power and approvals. | — | — | — | 4,99,800 | |
| — | Item Breakup | for details. | — | ||
| Fabrication and erection of 14 SWG CRCA sheet steel enclosure of suitable size for fixing of above solar inverter, Solar DB'S of a solar plant with Double Door, including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with EPOXY powder coating including cost and conveyance of all materials and labour charges. Should have suitable cable termination glands, grommets, lugs, connecting wires and all other accessories suit with the following switchgear and accessories. The cables should be properly terminated in the ensloure with necessary lugs and all necessary accessories complete. | — | — | — | 31,618 | |
| — | Item Breakup | for details. | — | ||
| Fabrication and erection of 14 SWG CRCA sheet steel enclosure of suitable size for outdoor LT distribution panel with Double Door, including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with EPOXY powder coating including cost and conveyance of all materials and labour charges. The MDBs shall be mounted on suitable required size of CC plinth (CC plinth cost will be paid separately) and secured with bolts, nuts and washers as advised by Engineer at site. The panel comprising of 320A tinned Copper Bus Bar(RYB & N of same size) required shape supported with appropriate DMC / SMC barriers and colour coded with heat shrinkable sleeves, LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters( Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) , Current T/Fs, indication lamps for incoming & outgoing feeders. suppot insulatorS, neutral links,Incoming & outgoing terminals,suitable cable termination glands , grommets, lugs, connecting wires and all other accessories suit with the following switchgear and accessories. The cables should be properly terminated in the switchgears with necessary lugs and all necessary accessories complete.The panel should comprise of the following Switchgear. (Drawing approval to be taken prior to supply),(CPRI Approval Mandatory). (i) Supply and installation of 160 A 4P MCCB, 36 KA, Micro processor based adjustable with LSIG protection conform to IEC 60947-2 model no. 4205 37 of Legrand make or it's equivalent with extended ROM , spreader links (2 sets) -1 no's (ii)Supply and installation of DPX3 160 thermal magnetic based release ; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 of model no. 4200 95 of Legrand make with extended ROM , spreader links (2 sets) -2 no's (iii) Supply and instllation of DPX3 160 thermal magnetic based release ; Icu = 36kA; 63A 4 Pole MCCB conform to IEC 60947-2 of model no. 4200 93 of Legrand make or it's equivalent with extended ROM , spreader links (2 sets).(iv)Supply and installation of change over switch of 100A of model no: IHCNFO0100 of havells make or Equivalent -1 no's (V)Supply and erection of C curve DP MCBs of 32 /25/20A with all connected accessories - 4 no's (vi)Supply and fixing of C curve FP MCBs of 32 A with all connected accessories - 4 no's (vii)Supply and erection of LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters( Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) on existing box panel board including connections complete.-1 no's (viii)Supply and erection of LED indicator lamps on the existing box panel board-3 no's (ix)Supply and erection of LT current transformer with primary 100/5A to 1000/5A ratio in the existing panel including connections complete-4 no's. The panel should conform to rdso letter no: No. RDSO-EEMOLKO(GENE)/4/2026 dated21-07-26 | — | — | — | 1,72,801 | |
| — | Item Breakup | for details. | — | ||
| Cement concrete solid block masonry in foundation and plinth or wall with factory made blocks with cement concrete 1:3:6 with all labour complete.(The wall should be properly plastered as per the advise of site supervisor) | — | — | — | 26,962 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 120 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendements and with necassary lugs and terminations. | — | — | — | 4,29,270 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendments including laying of cable in the trench and connected and with necassary lugs and terminations at both the ends complete. | — | — | — | 2,57,620 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 1,81,000 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations. | — | — | — | 7,124 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 4,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 12,600 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 37,605 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer of sand bricks etc.,as per the standards of cable laying (A minimum of 1mtr depth and 400 mm width) and filling the trench with soil duly ramming etc.The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 35,840 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 2,600 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 1204 of Hensel make or equivalent make with necessary terminals suitable for cables upto 150Sq mm and all necessary accessories complete. | — | — | — | 2,41,200 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92,IEC 60947-3 with necessary terminals suitable for cables upto 25 Sq mm and all necessary accessories complete. | — | — | — | 17,700 | |
| — | Item Breakup | for details. | — | ||
| Design, Fabrication, supply and erection of 300mm width, 62.5 mm depth, 2mm thick sizes perforated G.I tray (cable Tray) including Horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable G.I. Clamps / G.I. angles / G.I. flats and with necessary connected hardware etc | — | — | — | 81,100 | |
| — | Item Breakup | for details. | — | ||
| Supply, Transportaion, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 91,868 | |
| — | Item Breakup | for details. | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 1,825 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of junction box suitable for street light poles model no.GSJB306-T of size 275mm X135mm X 110mm with 4 nos of connectors and suitable clamps for fixing , Fire retardant -Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clamps 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 4,250 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of LED Street light fittings of 48 W with suitable driver with all connected materials as per attached spec (The supply includes accessories such as clamps, ties extenstion wires etc for fixing) conforming to IEC 60598-1. | — | — | — | 35,250 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of of LED flood light fittings 60 W with all connected accessories as per attached railway specification. | — | — | — | 46,420 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of LINNET Aesthetically designed linear mirror LED light 7W Provided with a high output PMMA diffuser for glare free light conforming to IS:10322 of model no. LCL-07-CDL of Crompton make or it's equavalent with all necessary accessories complete as per attached Railway specification. | — | — | — | 9,870 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 23,406 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 40W 4 feet LED tube light with 40W, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 3,579.88 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Recess / Surface mounting 18 W LED Square panel lighter (22.5*22.5*2.0CM or less) as per attached railway specification with all connected acessories. | — | — | — | 77,513 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing ,connecting and comissioning of Bedside Flexible Gooseneck Arm Reading Light, 3watt conforming to IS:16101 of model no.48042 of Philps make or it's equivalent with all necessary accessories complete. | — | — | — | 27,513 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and commissioning of Foot lamp 4 watt LED 4modular with 4 modular concealed box with enclosure for night light with necessary accessories complete or equivalent make. | — | — | — | 7,660 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 10 W LED bollard light with IP66 to ensure sustainble performance in all section and aesthetics with foundation and all connected accessories complete as per attached railway specification. | — | — | — | 60,319 | |
| — | Item Breakup | for details. | — | ||
| Supply and erction of 80mm dia GI Pipe 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239(Part-I)2004 including Joints, bends couplings and all necessary accessories complete. | — | — | — | 29,500 | |
| — | Item Breakup | for details. | — | ||
| "Supply and erection of 100mm dia GI Pipe (Medium ) 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239(Part-I)2004 including Joints, bends couplings and all necessary accessories complete. Make: Jindal, TATA, surya,Utkarsh." | — | — | — | 64,450 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Hand Dryer as per IS:302-2-30:2007 or latest. Make:Dyson, Dryflow, D-flow, Turboforce. | — | — | — | 14,375 | |
| — | Item Breakup | for details. | — | ||
| Cutting of groove in the wall,plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will bepaid separately) | — | — | — | 6,300 | |
| — | Item Breakup | for details. | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not lessthan 2 mm with junction boxes, bends and all accessories etc as required as per site requirement. Running of conduit, fixing with suitableclamps and nuts in groove / open /shelter | — | — | — | 11,854 | |
| — | Item Breakup | for details. | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitableclamps and nuts in groove / open /shelter | — | — | — | 72,960 | |
| — | Item Breakup | for details. | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq,mm 1100 Volts and one run of flexible copper conductor 1.5 Sq,mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters lenght) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 67,210 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) or its latest amendments. | — | — | — | 1,53,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 1,54,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe. | — | — | — | 54,285 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 35,132.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 13,007.25 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 6A Bell push switch with indicator conforming to IS:3854 or its latest amendment model no.AHLSBIW100/060, one module cover plate model no.AHLPLCWV01, 1/2 module flush metal box model no.AHZXMIZX01 of Havells make or similar to make including all other connected accessories complete. | — | — | — | 40,532.8 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make with necessary screws and all accessores complete. | — | — | — | 1,410 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent make with necessary screws and all accessores complete. | — | — | — | 2,350 | |
| — | Item Breakup | for details. | — | ||
| Provision of mobile Charging Arrangements with following accessories (i)3 x 6 Amps one way modular switch (as perIS 3854:1997) of makes Havells/Legrand/GM/Goldmedal. (ii)3 x International Socket 13/6 Amps of makes Havells/ Legrand /GM/Goldmedal (iii)1 x 16A SP MCB, of Makes:Havells/GM/ Legrand/Goldmedal (iv) 12 module or suitable Plastic Enclosures with Cover plate for Surface Mounting of makes Havells/Legrand/GM/Goldmedal,fixing of charging point on the wall complete including connections with all other connected materials and works. (v) Supply and fixing of 02 No's of dummy plates in the 12 modular plastic encloseure including Fixing of Charging point on the Wall/Pillers/Structure with suitable clamps/ rag bolts etc complete including all other connected materieals and accessories. | — | — | — | 10,810 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make with 12 module cover plate With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1including all accessories complete. | — | — | — | 20,850 | |
| — | Item Breakup | for details. | — | ||
| Supply and Fixing of Metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make with 8 module cover plate With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 including all accessories complete. | — | — | — | 10,800 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Metal flush box-6 module of model no:JIM 06 004 of GM FOURFIVE make with 6 module cover plate(With support frame) of model no:PK SB 06 005 - CASABLANCA of GM make or equavalant modular Legrand/Havells make comply with IEC 60669-1 including all accessories complete. | — | — | — | 2,680 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make with 4 module cover plate(With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 including all accessories complete. | — | — | — | 2,230 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Super efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, Massinory work and clamps nuts bolts etc... | — | — | — | 1,41,411.25 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of ABS SILENT CEILING MOUNTED CASSTTE EXHAUST VENTILATION FAN of model no: APT15-27 300CMH 150MM 6" of ATUMBERG make or its equivalent with including necessary plastering, Massinory work and clamps nuts bolts etc. | — | — | — | 49,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and Installation of 22G With G.I material which is fixed at plunems and starting of duct | — | — | — | 1,47,500 | |
| — | Item Breakup | for details. | — | ||
| Supply & erection of GI duct damper in the Ducting as per site requirement and site enginners instructions. | — | — | — | 63,700 | |
| — | Item Breakup | for details. | — | ||
| Supply of self contained drinking water cooler of capacity 150 Lrs cooling capacity and 150 Ltrs storage capacity, confirm to IS: 1475 (part-i) 2001 suitable for operation on 230 Volts +10%, 50 Hz single phase AC supply with latest amendments etc... | — | — | — | 45,579 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of ON Delay/Interval timer for the above of Supply Voltage - 200- 240VAC, 50/60Hz Model - 800XU. | — | — | — | 578 | |
| — | Item Breakup | for details. | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. in above junction box. | — | — | — | 971 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, testing, connecting and commissioning of 1.5 Ton capacity Hi wall split inverter Air conditioner 5 star rated with hermitically sealed Copper Condensor and ISEER > 5.6, R- 32 Refrigerant including all accessories & fixing of Outdoor Mounting Stand etc. with required lenght of the cables between indoor and outdoor units. OEM warranty of 5 years on PCB & 10 Years on compressor Note: (1) AC unit supplied to railways must match with the BEE Star Rating valid as on the date of supply. (2)The Product must be registered, on the name of Consignee, with OEM, after successful installation and the firm shall submit the BIS Certificates. | — | — | — | 8,27,672.25 | |
| — | Item Breakup | for details. | — | ||
| Supply, installation, testing and commissioning of Energy Saver for air conditioning units for 1.5T Capacity having memory based micro controller, with Dual sensor & display for room and coil temperature, measures room /coil/ ambient temperatures- features A 10-PT programmable menu and a remote to change your set temperature, which constantly analyses the temperature transfer profiles between the air and evaporator coil. (Warranty Period : Upto 30 months from the date of delivery.) | — | — | — | 1,77,708 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, testing, connecting and commissioning of Wall Mounted Stabilizer, with auto Cut-Off, Overload Protection, Time Delay feature, suitable for 1.5 Ton capacity split Air conditioning unit complete with all connected accessories etc... | — | — | — | 26,250 | |
| — | Item Breakup | for details. | — | ||
| supply and fixing of 16A combined unit with concealed metal box with 4M cover Plate + 16A c curve MCB + 16A Socket + 16A Magnus plug top equiivalent to model no: AA 4 068 of GM make(glossy white) for AC points. | — | — | — | 10,114.5 | |
| — | Item Breakup | for details. | — | ||
| Supply fixing connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent make with all connecting accessories complete. | — | — | — | 5,184 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of SPN DB's,8 way 8 module confirming to IEC:61439 IP 43 with metal door model no.507611 of legrand make or its equivalent make | — | — | — | 4,312 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) or latestas advised by the site supervisor with all necessary accessories complete | — | — | — | 17,489.5 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) or latest as advised by the site supervisor with all necessary accessories complete. | — | — | — | 33,978 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 63 A 4P MCB C Curve , 10 KA capacity with necessary connections and all accessores complete. Makes :legrand/L&T/C&S /Siemens/Schnider/ABB/Havells | — | — | — | 27,740 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 14,220 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811050 with all connected accessories. | — | — | — | 6,626 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811010 with all connected accessories. | — | — | — | 2,300 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811010 with all connected accessories. | — | — | — | 2,300 | |
| — | Item Breakup | for details. | — | ||
| Excavation of earth for one pit in any soil and refilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 1,646.65 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of Earth Electrode as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. Earth electrodes shall be procured from RDSO approved sources only , List of RDSO approved sources is enclosed as Anneux-RDSO List). | — | — | — | 8,438.3 | |
| — | Item Breakup | for details. | — | ||
| Drilling of 26 Nos of 12 mm dia holes on GIpipe dia 50 mm | — | — | — | 807.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Charcoal | — | — | — | 2,515.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Salt | — | — | — | 1,739.5 | |
| — | Item Breakup | for details. | — | ||
| Provision of RCC earthpit hollow box of size300 mm x 300 mm x300mm with 50 mmwall thickness as perDrg. no.SDO/RDSO/E&B/001 byusing M20 Gradeprecast RCC. It includesfixing of earth pits at various locations including Supply and Erection ofRCC precast slabs with hook to cover Earth pits of dimensions as shownin IRSEM drg no 19-D6. | — | — | — | 4,349.3 | |
| — | Item Breakup | for details. | — | ||
| Transportation charges including loading & unloading of earthing arrangements systemmaterial to site / location | — | — | — | 1,242.75 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection, Testing and Comissioning of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 1,43,130 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of rubber chequred mat of size 2mx1mx10mm of IS spec | — | — | — | 10,455 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of first aid box | — | — | — | 3,150 | |
| — | Item Breakup | for details. | — | ||
| Supply of portable Fire Extinguishers dry chemical type 9/10 Kgs. Capacity fitted with gun metal cap. Dry chemical powder 9/10 Kgs conform to IS:4303 and carbondioxide conform to IS 4947. | — | — | — | 25,704 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of key box complete. | — | — | — | 384 | |
| — | Item Breakup | for details. | — | ||
| Supply of Double open End Spanners set. Forged Chrome Vanadium Steel. Each head set at a 15° angle as per IS: 2028 as following ring & D sizes 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 22x24, 24x26, 24x27, 25x28, 30x32mm each one No. | — | — | — | 2,276 | |
| — | Item Breakup | for details. | — | ||
| "Supply of Digital Electrician Tool Kit (Model: Bosch GSB 500W 10 RE) Professional Corded-Electric Drill Tool Kit, MS & Plastic, 1-10 mm Chuck Capacity & Concrete, Steel & Wood Gbh 220 Corded Electric Professional RotaryHammer" | — | — | — | 12,500 | |
| — | Item Breakup | for details. | — | ||
| Supply of Aluminum self supported factory ladder with steps thickness of 3 mm heavy duty of size 10 Feet long complete with all accessories. | — | — | — | 7,000 | |
| — | Item Breakup | for details. | — | ||
| Supply of Digital clamp on meter 312 digit 2000 count 1000A AC with set of leads, manual, battery and carrying with all accessories | — | — | — | 3,770 | |
| — | Item Breakup | for details. | — | ||
| Supply of digital insulation tester, 4 voltages, 500/1000/2000/2500 volts 0 to 20,000 mega ohms, resolution of 10 mega ohm throughout the range digital complete with all accessories. | — | — | — | 7,160 | |
| — | Item Breakup | for details. | — | ||
| Supply of digital earth tester measurement of earthing resistance in 3 ranges 0-10/0- 100/0-1000 ohms including kits contents 4 MS spikes length 45cms each approx., 1 spike lifting rod, 3 rolls of flexible wire wound on spool (30m app), 5m loose wire, 1 hammer, 1 Rexine carrying case with all accessories. | — | — | — | 6,130 | |
| — | Item Breakup | for details. | — | ||
| Supply of 1/2 inch drive square socket set (S-11M), Cold forged from chrome vanadium steel and nickel chrome plated to enable rust prevention and aesthetically good looks. | — | — | — | 2,812 | |
| — | Item Breakup | for details. | — | ||
| Supply of Portable & Extension Aluminium Telescopic Ladder for Industrial Use With Support Bar, Premium Aluminum Alloy; EN131 Certified, 16-Steps Foldable Multipurpose Collapsible Ladder; Made of Aerospace engineered 6063 T5 grade of aluminium alloy with 1.5 mm thickness & anodized silver finish and precision engineered HDPE components to ensure maximum corrosion resistance; Load capacity: 150 Kg. Easy to Use, Compact to Extended height is 3.85 ft to 21.3 ft (117 cm to 6.5 Meter), easy to extend and retract with storage straps, convenient to use, store and carry around; Net weight approximate (16.5Kg).Should have passed EN 131-Part 4:2007 test standard. | — | — | — | 18,000 | |
| — | Item Breakup | for details. | — | ||
| Supply of Reversible Two-in-one screw driver. Blades from high Grade steel chrome plated size 6,0,8,0x200mm, with Madnetised Tip siize is 2,3. as per IS: 844. | — | — | — | 660 | |
| — | Item Breakup | for details. | — | ||
| Supply of insulated sleek design cutting and crushing facility Plyer of length 210mm for burnt PVC insulated wire. Induction hardened edges, injection moulded insulated sleeves to with- stand upto 1000Volts, Forged from Chrome vanadium steel as per IS: 3650/DIN5244. | — | — | — | 460 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
CEGE Technical Circular
ATTACHMENT
ListofLikelySuppliers.pdf
ATTACHMENT
GCC Apr 2022 with Correction slips
ATTACHMENT
JPO Digging of cables
ATTACHMENT
EarthingSpecificationMFEandOther.pdf
ATTACHMENT
RITESInspection.pdf
ATTACHMENT
HVACSpecification23-236.pdf
ATTACHMENT
LatestCPWDGENSPEC_compressed.pdf
ATTACHMENT
NITIREPSWorks50.pdf
ATTACHMENT
Technicalspecifications--9-26.pdf
ATTACHMENT
21072026FirepreventionGuideline.pdf
ATTACHMENT
ScopeofworkforABSSSOLAR_1.pdf
ATTACHMENT
CEGETechnicalCircular07-04-2022_compressed.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips._compressed.pdf
ATTACHMENT
RlyBd-JPO-DiggingofCables2013-Re-Circulatedin2022-LATEST.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .