Renovation of Toilets at Departure and SHA in Terminal building and other miscellaneous civil works at C A Kandla

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm.

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer- in-Charge. (a) Internal Work - Exposed on wall

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below each

Dismantling tile work in walls/floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testingof joints complete as per direction of Engineer in Charge. -Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testingof joints complete as per direction of Engineer in Charge. -Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testingof joints complete as per direction of Engineer in Charge. -Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testingof joints complete as per direction of Engineer in Charge. -Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion-Powder coated aluminium (minimum thickness of powder coating 50 micron) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling ]and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (a) With float glass panes of 4.0 mm thickness

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Dismantling of washbasin/urinal/ EWC/IWC etc. and connecting fittings including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling of pillar cock, bottle trap, stop cock, bib cock atc. and connecting fittings including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling stone/granite slab at wall/flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and fixing white colour wash basin including making all connections per direction/ satisfaction of Engineer in charge. Under counter basin rectangular size(mm)370X480X200 of JAQUAR (Code CNS-WHT-WB701)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Pillar Cock Auto Closing System of JAQUAR (Code PRS-031) for wash basin

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Liquid Soap Dispenser with Glass Bottle of JAQUAR (Code ACN-1135N)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Bottle Trap (with internal partition) 32mm Size with 250mm & 190mm Long Wall Connection Pipes & wall flange of JAQUAR (Code ALD-769L)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Waste Coupling 32mm Size Full Thread with 80 mm height of JAQUAR (Code ALD-705)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Angular Stop Cock with wall flange of JAQUAR (code FLR-5053N)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Towel rail 600 mm long of JAQUAR (Code AQN-7711) for wash basin area

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. 2 Way Bib Cock with Wall Flange of JAQUAR (code FLR-5041N)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge.Hand Shower (health faucet) with 1 metre long easy flex tube in chrome finish & wall hook with N.R.V. of JAQUAR (Code ALD-CHR-579)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Metropole Flush Valve Regular 40mm Size (Concealed Body) with Exposed Shut Off Provision & 100 mm square plateof JAQUAR (Code FLV-1093)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Auto closing concealed urinal flush valve with wall flange of JAQUAR (code PRS-073)

Providing and fixing sanitary fittings complete in all respect as per direction/ satisfaction of Engineer in charge. Toilet Roll Holder with flap of JAQUAR (Code ACN-1153N)

P/F PVC floor trap of self cleansing design incuding cost of cutting and making good the wall and floors. 100 mm inlet and 100 mm outlet

P/F soil, waste and vent pipes upvc rigid pvc pipe including jointing,with seal ring single socket 110 mm pipe

P/F soil, waste and vent pipes upvc rigid pvc pipe including jointing,with seal ring single socket 160 mm pipe

Providing and fixing water closet complete as per direction/ satisfaction of Engineer in charge. (a) Wall hung EWC with seat cover & hinges, accessories set etc of Jaquar (code-ARS-WHT-39951) in white shade of size 360x575x360 mm.

Providing and fixing ceramic urinal tub size (mm) 375x315x620 mm with fixing accessories set in in white shade complete as per direction/ satisfaction of Engineer in charge. Urinal Flat back of JAQUAR (code- URS-WHT-132530) in white shade of size 375x315x620 mm.

Providing and fixing SS Jali 150mm×150mm of approved make on existing floor trap complete as per direction/ satisfaction of Engineer in charge.

Providing and fixing kota stone slab as under counter basin with proper cutting size of basin with table rubbed, and 25mm deep and 25 mm thick, fixed in partition for self by cutting a chase of appropriate width with chase cutter andembedding the stone in the chase with epoxy grout or with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth complete.

Brick work with common burnt clay local available size brick of class designation 5.0 in foundation and plinth in complete as per direction & satisfaction of Engineer. Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay local available size brick of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in complete as per direction & satisfaction of Engineer. Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay local available size bricks of class designation 5.0 in foundations and plinth in: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Half brick masonry with common burnt clay local available size brick of class designation 5.0 in superstructure above plinth level upto floor V level Cement mortar 1:6 (1 Cement : 6 coarse sand)

Providing and fixing Modular toilet cubicles of Besco Titan 12 mm box up Series of Merino or Equivqlent consisting of high pressure 12 mm thick compact laminate board as per IS 2046 and as per fire retardant BS - 476/97 standards with phenolic core panels for partitions of intermediate divider, doors and pilasters. The cubicle shall have dimensions of 1500mm depth X 900mm width X 2100mm Height with on door size of minimum head rail on top of panels and panels shall be fixed on the floor with a clearance of maximum 150mm using stainless steel satin finish fixed at the floor included stainless steel (SS) lock set, SS door knob, SS gravity self closing hinge, SS coat hook with door stopper, SS U channel, SS head rail, SS adjustable foot, SS tabular holder, SS head rail wall bracket, SS head rail corner connection and SS noise reducing tape etc. as per direction of Engineer in Charge. The Height of Cubicles, for purpose of payment shall be measured upto the floor level and no deductions shall be made for clarances left over flooring.

Providing and fixing Modesty Panel System for Urinal Partitions of Merino Bosco or Equivqlent consisting of high pressure 12 mm thick compact laminate board as per IS 2046 and as per fire retardant BS - 476/97 standards with phenolic core panels for partitions of intermediate divider of required colour and shade. The Partition shall have dimensions of 500mm width X 1200mm height with stainless steel (SS) 304Grade accessories such as right angle brackets SS Screws and PVC Wall Plugs etc. complete as per direction of Engineer in Charge. The area for purpose of payment shall be calculated as full width and height and no deductions shall be made for any design chamfers.

Providing and fixing Besco PD Door of Merino or Equivqlent consisting of compact laminate 12 mm thick PD Door as per IS 2046 and as per fire retardant BS - 476/97 standards with required colour and shade. The Doors shall have dimensions of 750mm width X 1980mm height with standard - merino make panels shall be fixed on the floor with a clearance of maximum 150mm using stainless steel satin finish fixed at the floor included standard-merino make aluminium, nylon polyamide 6 accessories aluminium "D-post" channel, nylon coat hook, nylon WC lock set c/w occupancy indicator, nylon door knob, nylon hinges-gravity to close, nylon D-post end cap, door stopper rubber lining, S.S. screws 304 G & PVC wall plugs etc. as per direction of Engineer in Charge. The area for purpose of payment shall be calculated as full width and height and no deductions shall be made for any design chamfers.

Providing and fixing 6 mm thick mirror of superior glass (of approved quality) and of required dimension fixed on wall by means of SS Stud etc. complete as per direction / satisfaction of Engineer.

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Bend 87.5 degree: 110 mm bend.

Credit for taking away dismentaled doors, windows and clerestory windows (steel/ wood/aluminium/PVC) shutter including chowkhats, architrave, holdfasts etc. complete as per direction of Engineer in charge. Above area 0.5 sqm (Rates mentioned shall be fixed & no variation will be applicable on this item)

Credit for taking away dismentaled wash basin / urinal / EWC / IWC etc. complete as per direction of Engineer in charge. (Rates mentioned shall be fixed & no variation will be applicable on this item)

Credit for taking away of C.P. brass/Brass bib cock, stop cock, long body bib cock, long nose bib cock, angle valve, ball valve, close hole basin mixer, C.P. waste in basin/ sink and the like received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/measured before removing fron the site in the presence of Engineer-in-charge or his authorised representative complete as per direction/ satisfaction of Engineer.

Credit for taking away of SCI pipe fitting, centrifugal cast (spun)/sand cast iron pipes and fittings, C.I. flushing cistern, G.I. pipes and fittings, steel doors, window, ventilators, grill, round or square bars, M.S. sections etc. and the like item received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/ measured before removing from the site in the presence of Engineer-in-charge or his authorised representative complete as per direction/ satisfaction of Engineer

Credit for taking away of PVC connections, PVC flushing cisten with fittings, PVC over head tank, PVC bib cock, stop cock, ball valve, loft tank etc. and the like received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/ measured before removing from the site in the presence of Engineer-in-charge or his authorised representative complete as per direction/ satisfaction of Engineer.

N. M. Sharma

Bhimabhai A Ravaliya