Construction of 2 ACR at Govt Primary School Ahan

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

P/L, of dry stone soling / GSB Nallah makh/ Quarry Makh for foundation and inside plinth with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl all carriage involved from approved source to site of work complete

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all carriage involved from approved source.o site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl all carriage involved from approved source.o site of work complete

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all carriage involved from approved source.o site of work complete

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all carriage involved from approved source.o site of work complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6( 1 cement : 6 coarse sand) incl. Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level all complete. incl all carriage involved from approved source to site of work complete

Providing and fixing of wood work in position doors/ windows / ventilator wrought frames chowkats of Imported KD wood.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, and Suspended floors, roofs,

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.including all carriage involved complete.

Structural steel work Welded in built up sections and frame work including cutting, hoisting fixing in position all complete in angles/ flats/ tubes etc. including fixing of 18 gauge MS sheets in soffits and eveas boarding including MS framework including cost of steel primer complete job including carriage by MT.

Providing/Fixing of CGI Colour coated (Hi-Rib) profile sheets for roofing including vertical/curved surface fixed with Polymer coated J or l hooks, bolts and nuts 8mm diameter with bitumen and G.I Limpet washers or with G.I Limpet washers filled with white lead, including overlapping of sheets complete (upto any pitch in horizantal/ vertical or curved surface) excluding the cost of purlins, rafters (0.50mm thick) etc incl ridges hips/ valleys 60cm vide of colour GI sheets sheets including cost of screws/ washers all complete and cost and carraiges of materials complete.

12mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) incl all carriage complete

Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.incl all carriage involved from approved source to site of work complete

Providing and fixing of 10mm thick plywood in room ceiling including supporting structure 2" x 2" wooden joists and 50 x 50mm wooden cornice at corners and wherever required including cost of necessary beadings, nails and other fittings/ fixtures complete

Providing and fixing of popular wood in rooms chejja including all necessary fittings/ fixtures and carriages of material complete as per the directions of Incharge Engineer.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading

Providing and fixing of Heavy duty glass panes 3.5mm thick instead of ordinary glass panes 13.75Kg/sqm in doors windows and clerestory windows shutters.

Providing and fivxing of Aluminium Hardware iteams of approvewd brand and make including necessary fittings/fixtures complete:-

150mm Tower Bolts

100mm Tower Bolts

100mm Handles

Aldrops

200mm Handles

Eye Hooks

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Lighting point (One lighting point) includes wiring of lighting point in 1.5 sqmm PVC insulated copper wire and 2.5 Sq.mm PVC insulated multistandard copper wire , 6 Amp one way switch , 6 Amp S pole MCB, 10 amp DP MCB, 2 way DB MCB and hylem sheet with 16/15 Watt LED surface lights including cost of channels as per requirement< One Point controlled by One 6 Amp switch (upto 10 meters) including placing and fixing in position 25mm PVC Conduit pipes with necessary bends and other fittings in RCC works including Cost of Service line as directed by Engineer Incharge.

Heating point ( One heating point ) including wiring of lighting pointin 2.5Sq.mm PVC insulated copper wire and 4.00 Sq.mm PVC insulated Multistrand copper wire, 16 Amp one way switch, 10 Amp S pole MCB, Two way DB MCB and hylem sheet including placing and fixing in position deep junction of cast iron with network . Conduit pipes with necessary fittings in RCC work complete as per the directions of Incharge Engineer.

Providing and fixing of one fan point including wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5Sq.mm PVC in multistrand copper wire 1200mm ceiling fan Electronic fan dimmer, 6 Amp S pole MCB, 10 Amp DP MCB, 2 Way DB for Housing MCB or Lighting Circuits and hylem sheets including placing and fixing in position fan clamp boxes with MS Fan clamps connected with network conduit pipes with necessary fittings in RCC work complete as per the directions of Incharge Engineer.