Maintenance contract for quay and transit area inside cargo jetty area for two years

No. In Fig. (Rs.) In Words In Fig. In Words

1 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and Rs. Two thousand two

disposal of dismantled materials up to a lead of 5 kilometre, stacking serviceable and hundred three and One Cubic

unserviceable material separately including cutting reinforcement bars. twenty two paise

140.00 2,203.22 1 M3 Meter

Demolishing C.C. work by mechanical means and stockpiling at designated locations and Rs.One thousand five

disposal of dismantled materials up to a lead of 5 kilometre, stacking serviceable and hundred fifty eight and One Cubic

unserviceable material separately. fifty two paise.

2 200.00 1558.52 1 M3 Meter

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Rs. Four thousand four

hundred twenty eight

and twenty four paise One Cubic

A 50.00 4428.24 1 M3 Meter

1:1½:3 (1 Cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). Rs. Five thousand four

hundred forty eight and One Cubic

B 300.00 5448.56 fifty six paise 1 M3 Meter

4 Providing and laying in position specified grade of reinforced cement concrete, including the

cost of centering, shuttering, finishing -

All work up to plinth level :. (Rate is exclusive of cost of reinforcement).1:1.5:3 (1 cement : Rs.Eight Thousand One

1.5 coarse sand : 3 graded stone Hundred Ninety Eight

aggregate 20 mm nominal size).. (A) For protection wall and copings and thirty nine paise

400.00 8198.39 1 M3 Meter

B For beams and cantilevers

Rs.Eight Thousand Six

Hundred Ninty Five One Cubic

15.00 8695.36 and thirty six paise 1 M3 Meter

5 Providing and laying reinforced cement concrete mix 1:1-1/2:3 consisting of ingredients of

cement, sand and crushedgraded trap stone metal including mixing,placing,vibrating,

levelling, curing, necessary formwork, scaffolding etc.complete for slab.The shuttering work Rs.Eight Thousand

for slab is to be done under tidal condition and the rates inclusive the cost of shuttering, Eight Hundred Twenty

hiring of jolly boat, floating craft etc., complete as directed. Five and twenty seven One Cubic

100.00 8825.27 paise 1 M3 Meter

6 Providing, laying & fixing in position upto 2km.lead reinforced cement concrete of mix 1:1-

1/2:3 precast RCC slab consisting of sand cementand crushed graded trap stone metal

including mixing, depositing, vibrating, levelling & curing inraft including cost of necessary Rs.Six Thousand Nine

formwork as directed (Rate isexclusive cost of reinforcement). Hundred Thirty Five One Cubic

20.00 6935.38 and Thirty eight paise 1 M3 Meter

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in

position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Rs.Sixty Two and

A 65500.00 62.76 seventy six paise 1 Kg. One Kilogram

Providing & laying cement concrete solid blocks1:8:6 (machine made) confirming to relevant

IS(Latest Edition) masonry 200mm thick set in cement mortor 1:6 including curing etc. Rs.Three Thousand six

complete as directed. (A) In plinth /foundations/ super structure hundred sixty eight One Cubic

8 70.00 3668.60 and Sixty paise 1 M3 Meter

9 Plastering with cement mortar 1:4 scrubbing & cleaning, finishing smooth curing etc.

complete. For interior/exterior plastering upto floor two level.

12 mm thick ( with raking out joints)

Rs.Two Hundred One Square

(A) 1200.00 215.08 Fifteen and eight paise 1 M2 Meter

10 Supply of Machineries as directed by Engineer-in-charge. (A) Hire charges for Hydra of

loading capacity up to 5 M.T. including wages for driver cleaner and cost of fuel.

250.00 800.00 Rs. Eight Hundred 1 Hour One Hour

B JCB of loading capacity of 0.50 to 1.0 m3 including wages for driver, cleaner and cost of

250.00 800.00 Rs. Eight Hundred 1 Hour One Hour

11 Fabricating including supplying and erecting steel structure including, hoisting,

fixing,bolted and cutting to required length and shape,drilling holes, jointing in an approved

Rs.Fifteen and fifteen

manneretc. complete as directed. (Steel will be given free of cost)

1000.00 15.15 paise 1 Kg. One Kilogram

Structural steel work riveted, bolted or welded in built up sections,trusses and framed

work, including cutting, hoisting, fixing in position and applying a priming coat of approved

Rs.Seventy Eight and

steel primer all complete.

12 5000.00 78.37 thirty seven paise 1 Kg. One Kilogram

13 Fabricating including supplying and erecting steel structure including, hoisting,

fixing,bolted and cutting to required length and shape,drilling holes, jointing in an approved Rs.Eighty Eight and

manneretc. complete as directed. (Work to be done under tidal conditions) ninety seven paise One Kilogram

14 Supply of Tractor with trolley of loading capacity 5M.T along with tractor driver and four

Rs.Three Thousand

labours for loading unloading and other miscellenous work including the cost of fuel, for

Five Hundred Forty and

hours day.

250.00 3540.18 Eighteen paise 1 Day One Day

15 Opening of chocked drain holes from underneath of wharf and transist area by removing of

chocked material with help of crow bar , hammer, G I Pipes etc complete including cost of

Rs.One Hundred Eighty

all labour etc complete as directed by engineer-in-charge. (Work is to be done under tidal

One and twenty two

conditions)

2000.00 181.22 paise Each Each

16 Making of drain holes of 100mm dia. and 400mm to 800mm depth by core cutter machine

Rs.One Thousand two

at wharf area as directed by engineer - in - charge. The work including all tools, plants,

hundred seventy one

labours and machinaries requires for making the holes.

50.00 1271.38 and thirty eight Each Each

17 Rough stone pitching with trap stones (minimum 150mm thick) set in cement mortar 1:6

Rs.Five Thousand three

for toe walls & revetment as per profile including curing etc. complete as directed. (under

hundred ninety seven One Cubic

tidal conditions)

100.00 5397.80 and eighty paise 1 M3 Meter

18 Applying one coat by brushing SBR Latex mixed with Cement in the ratio of 1:1.5 by volume

as a bonding coat over existing slab/ balconies/ chajjas etc., after cleaning the surface free

of all dust and loose material and wetting the same as per the manufacturers instructions.

Rs.One Hundred One Square

3000.00 125.00 twenty five 1 M2 Meter

19 Welding electrically or by any other method MS plates, R.S. joists, Tees, chanels etc. up to a

thickness of 10cm. including cost of electrodes charges for welding set etc. complete as

dircted. (A) Up to 10cm. Thickness (including steel reinforcement also) Rs.Two and thirty eight One

15000.00 2.38 paise 1 Cm. Centimeter

20 Day to Day (Round the Clock) inspection of wharf area and fender blocks while

berthing/sailing/shifting and stay period of vessel. The work comprises of to take the

berthing/sailing/shifting chart of vessel from the signal station of deendayal port trust,

keep the up-to-date record of movement of vessels in the prescribed format given by

Engineer and to keep informed concerned engineer about day to day supervision activities

carried out in writing as well as verbally. The engaged personnel is also responsible to

hand over the Damage Memo to Traffic Department/Signal station and Marine Department

timely for fixing responsibility of damage if any occurrs as and when directed by concerned

Engineer of work. He has to carry out the inspections at regular interval daily in the area

from 0(zero) panel to 16(sixteen) cargo berths, Passenger jetties, Craft jetties and Bunder

basin area and wherever directed by concerned Engineer of work for inspection and

noticing the damages if any. The contractor has to strictly monitoring the damage occurrs

to wharf area and fender blocks while berthing/sailing/shifting and stay period of vessel. (If

any damage found un-noticed due to the negligence/lapse from contractor side, the

assessed cost of the same damage will be recovered from the R.A. Bills of contractor. The

transportation for inspection and communication (mobile connectivity) facilities to the

engaged personnels should be provided by the contractor.

Rs. Four Thousand six

hundred eighty six and

730.00 4686.53 fifty three paise 1 Day One Day

21 Rebaring of following various dia. Bars in existing R.C.C. beam and slab including

approved chemical, making appropriate hole, cleaning, scaffolding, all labour and materials

as directed by Engineer incharge. (A) 10mm dia. Bars Rs.Three Hundred

50.00 325.00 twenty five 1 No. One Number

12mm dia. Bars 200.00 350.00 Rs.Three Hundred fifty 1 No. One Number

16mm dia. Bars 200.00 400.00 Rs.Four Hundred 1 No. One Number

20mm dia. Bars 50.00 500.00 Rs.Five Hundred 1 No. One Number

22 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform

finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c

cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining

out complete.

A New work (Two coats)

Rs.One Hundred Ten One Square

1200.00 110.95 and ninety five paise 1 M2 Meter

23 Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified

shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic

paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank

heater and profile shoe heater, driven by experienced operator on road surface including

cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and

foreign material etc. complete as per direction of Engineer-in-charge and accordance with

applicable specifications. Rs.Four Hundred thirty One Square

800.00 436.66 six and sixty six paise 1 M2 Meter

24 Wall painting with acrylic emulsion paint of approved

brand and manufacture to give an even shade :

A Two or more coats on new work

Rs.Ninety Six and fifty One Square

300.00 96.50 paise 1 M2 Meter

25 Painting with synthetic enamel paint of approved brand and manufacture of required colour

to give an even shade :

A Two or more coats on new work/old work over an under coat of Rs.Two Hundred Forty

suitable shade with ordinary paint of approved brand and manufacture Three and Eighty One One Square

2500.00 243.81 paise 1 M2 Meter

26 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to

give an even shade :

A Two or more coats on new work/old work Rs.Eighty and fifty One Square

300.00 80.57 seven paise 1 M2 Meter

27 Finishing walls with Acrylic Smooth exterior paint of required shade:

Rs.One Hundred

A New work/old work (Two or more coat applied @ 1.67 ltr/10 sqm Sixteen and eighty One Square

over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 800.00 116.80 paise 1 M2 Meter

28 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick

aluminium sheet, face to be fully covered with high intensity encapsulated type heat

activated retro reflective sheeting conforming to type - I of ASTM-D 4956-01 in approved

colour combination including subject matter, message/ symbols/letters of required size and

borders etc., pasted on substrate by an adhesive backing which shall be activated by

applying heat and pressure and fixing the same with suitable sized aluminium alloy rivets

on concrete/metaled surface including all leads and lifts etc. complete as per drawing, Rs.Three Thousand

specification and direction of Engineer--in-charge Nine Hundred Twenty One Square

35.00 3926.69 Six and sixty nine paise 1 M2 Meter

29 Repairing of steel pontoons of various sizes situated at Passenger jetty, flotilla jetty, SNA

jetty by welding the leakage holes developed during operation of pontoons with necessary

thick steel plates, or by fixing the plates with necessary size of nut bolts, clamps, rubber

gasket to stop the leakage of water inside the pontoon and to restore/bring the pontoon in

original position, including dewatering the water from pontoon, complete with all labour

and material as directed by Engineer in Charge.The work also involves providing necessary

equipments/machineries for carrying out repairing work.

10.00 20000.00 Rs.Twenty Thousand 1 Job One Job

30 Maintenance of steel Pontoons and Walkway by oiling & greasing of all the movable parts

such as walkway rollers, hinges, plates and guide piles,guide plates, guide channels etc.

including cleaning of walkway area and pontoon area. The work comprises also to check the

water level inside Pontoons by opening and closing manhole cover & to submit the report of

individual pontoon thereof etc. complete as directed by engineer in charge. The work

includes the cost of oil, grease, tools & plants and labours as directed by the engineer in Rs.Four Hundred

charge. Ninety Nine and eighty

2912.00 499.88 eight paise 1 No each

31 Chipping and removal of dilapidated concrete from RCC structural members carefully by

suitable means upto sound concrete using electrically operated low impact concrete chipper

(where use of electrical chipper is not feasible chisel & hammer may be permitted with great

care and under supervision). including cutting/Removal of liner, cutting the excessively

corroded reinforcement wherever directed, cleaning the chipped surface with wire brush,

providing and applying rust covering primer. complete as specified & as directed including

necessary scaffolding. Removing/disposing or stacking the salvages etc. Complete as

specified & as directed by EIC. One Square

100.00 400.00 Rs.Four Hundred 1 M2 Meter

32 Providing and fixing shear connectors supplying, fabricating and fixing HYSD TMT

minimum Fe 500D grade rods of 12 mm dia of min 250mm long to be placed in position in

14 mm dia in 150 mm depth hole, as shear connectors / anchor rods, including supplying,

mixing, drilling and filling the gap around the rods with anchor resin RE10 or equivalent.

Complete as specified & as directed by EIC.

350.00 200.00 Rs.Two Hundred 1 No. One Number

33 Anti corrosive coat : Supply and apply of Anticorrosive Zinc primer coating to the new and

existing reinforcement after removing the rust and scales by mechanically to prevent the

rebars from corrosion activity as specified and completion as directed by EIC.

500.00 300.00 Rs.Three Hundred 1 Kg. One Kilogram

34 Providing and laying cement based pre packed non shrink free flowing Micro concrete with

ratio of 1:1 (Cement and 12mm chip) including water tight shuttering etc., complete. As

specified and as directed by EIC (Manufactured by M/S BASF, M/S FOSROC, M/S

PIDILITE or any equivalent supplier).

10.00 40000.00 Rs.Forty Thousand 1 M3 Meter

35 The Acrylic emulsion cement modified and water based concrete Curing Membrane (such as

MasterKure 185 or equivalent) and Appling immediately after the concrete gets finished, the

membrane shall be sprayed over the concrete finished area without any gap or pinhole. The

cost of all materials, tools and all labour charges etc. are included., completion as specified

and as directed by the Engineer-In-Charge. Rs.Two Hundred One Square

100.00 275.00 Seventy Five 1 M2 Meter

36 Providing and applying protective coating MasterProtect 300- Aliphatic Acrylic protective

and waterproof coating after proper surface preparation, cleaning of dust, dirt etc. System

should be application of MasterSeal 399 Primer- Water based acrylic primer on prepared

surface and application of 2 coats of MasterProtect 300 or equivalent at suitable brush or

roller, completion as specified and as directed by the Engineer-In-Charge.

One Square

100.00 500.00 Rs.Five Hundred 1 M2 Meter

37 Providing 10 mm to 20mm thick flooring with free flow, high strength, non shrink

cementitious precision grout over existing RCC/CC surface including preparation/cleaning

of existing surface, applying the grout as per manufacturer recommandations etc complete Rs.One Thousand

with all material and labour as directed by Engineer in charge. Seven Hundred Eighty

Three and thirty one One Square

480.00 1783.31 paise 1 M2 Meter

38 Providing and fixing wooden planks made from secondary hard wood as approved by

Engineer in charge including cutting wood in required size and length, removing old wooden

planks from site, fixing the new wooden planks in position including drilling holes

providing necessary self drilling screws for fixing wooden planks in position complete with Rs. Seventy five

all labour and material as directed by Engineer in charge. Thousand Two hundred

forty seven and twenty One Cubic

3.00 75247.20 paise 1 M3 Meter

39 Applying one coat of Epoxy primer over new/ old steel and other metal surface over 10 cm

in width or girth after and including preparing the surface by thoroughly cleaning oil,

grease, dust and other foreign matter and scoured with wire brushes, fine steel wool,

scraper and sand paper complete as directed by Engineer in charge Rs.Forty Five and fifty One Square

1000.00 45.57 seven paise 1 M2 Meter

40 Painting two coats (excluding priming coat) on new/old steel metaled surfaces with epoxy

paint. Brushing exterior typr I to give an even shade including cleaning the surface of all

dirt / dust & other foreign matter on surface over 10cm in width /girth. Rs.Ninety Three and One Square

1000.00 93.43 forty three paise 1 M2 Meter

TOTAL = Rs.

I / We am/are willing to carry out this work at _________% above / below (percentage should be written in figure and

words). The tendered rates mentioned above amount of my / our tender are put as under :-

Estimated amount put to tender Rs.____________________________ Estimated amount put to tender Rs._________________________

Deduct ___________% below (-) Rs.___________________________ Add _______% above (+) Rs._____________________________

Net Rs.__________________________________________________ Total Rs.______________________________________________

In words (Rupees __________________________________________ In words (Rupees _______________________________________

Executive Engineer (H)

Contractor Deendayal Port Authority