Improvement of WS,SI and SD system for different offices of collectorate Nabarangpur under SP, D.No.13-4215 SUJALA for the year 2025-26

(Part-A) Civil Items and PH ancillary work

Dismantling and removing 2.5cm thick artificial stone flooring including staking the useful materials for reuse and removing the debris within 50 m lead.

Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50 m lead.

Cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages to wall and floor per mtr.

Cement concrete (1:2:4) with 12mm size hard granite chips.

Supplying all materials, Labour T&P for C.P.in 12 C.M(1:3) as per P.H.Secification etc.

Supplying all materials, labour, T&P for fixing tiles in dados skirting and risers of steps on 12mm thicks cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials, labour, T&P for fixing of precast glazed tiles in floors and walls on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the polishing complete including cost of glazed tile.

Supplying all materials, labour T&P for fixing of double syumphonic commode with porcelain cistern including seat, cover with integral S.Trap and fixing to the floor with wooden plugs & C.P. screws and jointing the trap with HCI pipe etc.including 10ltr capacity low level cistern all complete as per direction of EIC (Jaguar make Cat No. VGS-WHT-81853S300UF)

a. Jaguar make Cat No. (VGS-WHT-81853S300UF)

b. Jaguar make Cat No. ( OPS-WHT-15753NS250UFSMZ)

c. Replacement ( (Jaguar make Cat No. SLS-WHT-6751P180PPZ)

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification (Jaguar make Cat No. FNS-WHT-40801)

Supplying all materials,labour and T&P for fixing pedestal for wash hand basin complete recessed at the back for the reception of pipes and fittings etc. all complete as per specification (Jaguar make Cat No. FNS-WHT-40801 )

Supplying all materials,labour and T&P for fixing (600mmx450mm.) bevelled edge mirror of superior glass mounted on 6mm. thick A.C. sheet or ply-wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification

Supplying all materials,labour and T&P for fixing of soap holder fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification (Jaguar make Cat No. AKP-35731P)

Supplying all materials,labour and T&P for fixing standard size C. P. towel rail fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification. (Jaguar make)

a. Towel Rail (Jaguar Make Cat No. CAN-1111BNM)

b. Towel Ring (Jaguar Make Cat No. CAN-1121BN)

Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.(Jaguar make Cat-No URS-WHT-13261)

Fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556 : Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification.

Supplying all materials,labour and T&P for fixing cromium plated brass shower rose with 15mm. or 20mm. inlet including polishing etc. all complete as per specification (Jagaru make)

a. Health Faucets (Jaguar make Cat No. ALD-565)

b. O.H. Shower (Jaguar make Cat No. OHS-1989)

Supplying all labour and T&P for fixing of C.P.fitting fixture of the following size as per specification all complete

a. 15mm dia C.P Angular Cock with stop cock (Jaguar make Cat No. COP-057PM)

b. 15mm. dia.C.P. Long body Bib cock (Jagur make Cat No. COP-107PM)

c. 2Way Bib Cock with wall flange (Jaguar Make Cat No- COP-041PM)

d. 15mm. dia.C.P. Pillar cock with aerator (Jaguar make Cat No. COP-011PM)

e. 15mm.dia.C.P. stop cock(concealed)

g. 32mm dia Waste pipe

Supplying all materials,labour and T&P for 1000ltr PVC Self Cleaning Tank with MS staging on the existing roof of the building as per drawing, specification and direction of Engineer-in-charge etc all complete.1000Ltr PVC Self Cleaning Tank

Supplying all materials, labour, T&P and fixing P.V.C. SWR S/S Pipe (ISI type-B) and fittings to walls with nails, bobiins and wooden plugs as per P.H. sepcification.

a. 110mm dia PVC Pipe

b. 75mm dia PVC Pipe

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring

i. 110mm dia P.V.C. SWR door bend 87.5'

ii. 75mm dia P.V.C. SWR door bend 87.5'

iii. 110 mm dia P.V.C. SWR plain bend 87.5'

iv. 75mm dia P.V.C. SWR plain bend 87.5'

v. 110 mm dia P.V.C. SWR plain bend 45'

vi. 75mm dia P.V.C. SWR plain bend 45'

vii. 110 mm dia P.V.C. SWR offset bend

viii. 110mm dia P.V.C. SWR P Trap

ix. 110mm dia P.V.C. SWR S Trap

x. 110mm dia PVC SWR Door cap

xi. 75mm dia PVC SWR Door cap

xii. 110 x 110 x 110mm dia PVC SWR Tee

xiii. 75 x 75 x 75mm dia PVC SWR Tee

xiv. 110mm dia P.V.C. Nahani Trap with out Jally

Supplying all materials,labour,T&P and laying to leave and slope and jointing with sulvent cement for PVC pipes including bed concrete and (1:4:8) and humps over top the pipe (1:2:4) as per specification all complete

(a) 110mm dia PVC Pipe (4kg)

Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to [ASTM-D-1785/89,Sch-80.],the following nominal diameter with fittings and clamps including testing as per specification all complete

i. 25mm dia PVC Pipe

ii. 20mm dia PVC Pipe

iii. 15mm dia PVC Pipe

iv. 50mm dia HDPE Pipe

Supplying all materials,labour and T&P for constructing Man-hole chamber with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:3:6 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with K.B. bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification.

Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete.

Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing.

Supplying all materials,labour and T&P for constructing septic tank with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with K.B. bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification. 10 users'Septic Tank size [2.0x0.9x1.80mtr.]

Providing, fitting & fixing of Single leaf soild WPC door shutter of 30mm thick compacted with wood grain finished with 2 Nos SS Handle (150mm) 2 Nos SS Tower Balt (250 x 10) 1No SS Aldrop (400 x 300), 4Nos SS Butt Hings (125 x 8.5 x 5.5(, Backside Butffer with all necessary fittings complete with approved colour as per direction of EIC. (century ) NSWT) Ground floor.

(Part-B) Sinking of 200x150mm dia Bore well

Labour for drilling a perfectly vertical bore hole of specified dia & specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs as required to suit the site condition including supply of rigs with its accessories T&P and consumables etc for lowering 200mm dia PVC/G.I pipes for housing fitted with socket and with or with out well screens as per the necessity for the soft medium and hard formation (PVC/G.I) pipe casing if required to prevent 125mm dia casing pipe and collapses of the over burden to be provided by the contractor including lowering and with drawing after completion of the tube well.

Lowering the following size G.I/PVC pipes with or without slotted pipes as per the necessity from ground level upto 30.00Mtrs depth and fitted and fixed upon perfectly vertical position including Lowering the following size G.I/PVC pipes with or without slotted pipes as per the necessity from ground level upto 30.00Mtrs depth and fitted and fixed upon perfectly vertical position including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials T&P etc complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. (a) 200mm dia PVC.Casing Pipe.

Supplying all materials T &P Lowering the casing pipe for protection of 200mm dia casing pipe etc as per direction of EIC. 200mm dia PVC Pipe Con.IS.1239 Part-I (2004) Heavy type

Cleaning and developing the tube wells with their own compressor continuously discharge is obtained from the tube wells including supply and use of all necessary equipments and labour as per the direction of EIC.

Supplying all materials, labour and T&P for fitting and fixing of 1.5HP Submerisble pump set etc all complete as per specification all complete (Make - V-guard/ CG/ Kirloskar)

Supplying all labour materials, T&P for fitting and fixing of suitable control pannel of pump set (Make - V-guard/ CG/ Kirloskar)

Supplying all labour materials, T&P for fitting and fixing 2.5mmsqr 3 Core Submersible Flat Cable for 5HP Submersible Pump etc. complete as per the direction of EIC. (Make - Polycab, KEI, Havells, and Finolex)

Supplying and fixing of following nominal dia HDPE Pipe for suction pipe.

(a) 25mm dia HDPE Pipe

Supplying and fixing of Electrification