DHUMAKOT GOV Supply scheme Under NAINIDANDA blocks in District Pauri

Rates for Supplying ,carting , laying and jointing of G.I pipe (M) , Source work ,Reservoir& Providing Functional House Hold Tap Connection (FHTC) for appropriate & qualitative drinking water for each house hold and all other appurtenant works etc complete DHUMAKHOT water Supply scheme Under NAINIDANDA blocks in District Pauri. All rates shall be included all types of taxes and G.S.T. It is necessary the contractor will start the work from source to Distribution System. If any dispute in the source than other work will not done by the contractor

Repair & Cleaning of Intake well including cleaning Inlet channels, painting of Existing R.C.C. Wet Intake well 8m Internal dia by removing mud etc. and laying of check dam (6x1.5x1.5) M in size near intake well to divert flow of water towards intake well (as per details attached)

Repair, testing & commissioning of water treatment plant of slow sand filter including supplying and filling plinth, cartage by truck and mule, cleaning of treatment plant and plastering and painting of existing water treatment plant (as per detail attached)

Supply of all materials, labour and T & P etc. and construction of R.C.C. Sump / Clear Water Reservoir of following Capacity in K.L. as per design and drawing including fixing of pipes and fittings including cartage of materials etc. complete Raw Water Sump 50.0 KL Capacity at Top CWR

Clear Water Sump 20.0 KL Capacity at Top CWR

Clear Water Sump 35.0 KL Capacity at Top CWR

Clear Water Sump 160.0 KL Capacity at Top CWR

RCC CWR 2.0 KL

RCC CWR 4.0 KL

RCC CWR 10.0 KL

RCC CWR 15.0 KL

Supply and fixing of PVC tank type chlorinator of 50 Liter capacity at top of all service raservoirs.

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW YST 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete in repair From MPS to IPS MSERW Pipe 100 mm Dia, 4.8 mm Thickness

From IPS to TOP CWR MSERW Pipe 80 mm Dia, 4.8 mm Thickness

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I. medium screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. 15 mm dia (For FHTC)

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Excavation of earth for pipeline trench in following strata lift upto 1.5 m lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of labour, T & P etc.all complete assuming that 90% pipe line is laid in trenches, it is estimated that 95% excavation will be in soil mixed with shingle, bajari and boulders and rest 5% will be in medium rock (trench 0.60 wide and 0.60 deep) Soil Mixed with boulder and bajari

Medium Rock

Supply & fixing of following sizes of valves including carting the same up to side of work and fixing the same in water supply lines including cost of valves, specials, labour and T&P complete in all respect Reflex Valve 100 mm dia (CS D/F Class 300 ASA)

Reflex Valve 80 mm dia (CS D/F Class 300 ASA)

C.I. Air valve (Double Acting) 50mm

Supply of all materials, labour, T & P etc. and Construction of size Sluice Valve / Reflux Valve / Scour Valve/Air valve Chamber as per type design complete (1.2x1.2x1.2)

Supply of all materials, labour, T & P etc. and Construction of R.C.C Anchor Block (size 0.75 m x 0.75 m x 0.75 m) as per type design complete

Making 2 M wide Briddle path for rising main including hill side cutting and coolie walling of all materials, labour, T & P etc.

Painting of MSERW Pipes with 2 coats of approved quality. (Anti-Corrosive paint over one coat of Primer) (Dia of pipe in mm) 100 mm dia

80 mm dia

Supply and fixing of the following fittings including cartage of materials, labour, T&P etc. complete Gate/Wheel Valve ( Brass )/G.M.Valve 15 mm dia

20 mm dia

25 mm dia

32 mm dia

40 mm dia

Supply of all materials, labour, T&P etc. and construction of 0.9 m x 0.9 m x 0.9 m size Gate Valve chamber with FPS bricks (as per type design)

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main 15 mm nominal bore

C.I.Mouth, brass ferrule 15 mm dia

Providing G.I.Tee (equal)

Providing G.I.Union(15 mm dia)

C.P.Brass extension Nipple

Providing G.I.elbow (15 mm dia)

Excavation for foundation in Soil mixed with boulders for protection work

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P etc. complete in Intake work, along the Rising main, Supply/feeder main, distribution system, storage reservior etc

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P etc. complete in Intake work, along the Rising main, Supply/feeder main, distribution system, storage reservior etc

Cartage of Material from foot hill Kotdwar to Site Store at Road head by truck in Pucca & Kachcha Road & also including by head load & stacking of materials (as per annexure)

Repair of existing Staff Quarter Type- Ist at MPS & IPS including supply of all materials, labour and T & P etc

Repair of existing pump house 6mx5m 6m x 5m in size at MPS & IPS including supply of all materials, labour and T & P etc.

SITC of electric driven multi-stage horizontal Raw water Vertical turbine pumps with bronze impellers, stainless steel shaftcapable to deliver clear water 450 LPM discharge at 90 Mt. head 1440 r.p.m. at RAW WATER

SITC of horizontal shaft TEFC electric motors suitable to run on 415 +-10% volts, 3 phase, 50 Hz A.C supply and suitable motor for above pump, 2900 r.p.m. at RAW WATER

Supply of MS sheet fabricated, dust and vermin proof cubical floor mounting type control panel made out from 14 SWG MS sheet, copper bush bars, having 1 no. incoming and 2 nos. outgoing (as per annexure)

SITC of electric driven multi-stage horizontal clear water Centrifugal pumps with bronze impellers, stainless steel shaftcapable to deliver clear water 410 LPM discharge at 390 Mt. head 2900 r.p.m. at MPS

Supply of M.S fabricated base plate and coupling for above pumps and motors.at MPS & IPS

SITC of horizontal shaft TEFC electric motors suitable to run on 415 +-10% volts, 3 phase, 50 Hz A.C supply and suitable motor for above pump, 2900 r.p.m. at MPS

SITC of electric driven multi-stage horizontal clear water Centrifugal pumps with bronze impellers, stainless steel shaftcapable to deliver clear water 360 LPM discharge at 360 Mt. head 2900 r.p.m. at IPS

SITC of horizontal shaft TEFC electric motors suitable to run on 415 +-10% volts, 3 phase, 50 Hz A.C supply and of 60 HP, 2900 r.p.m. at IPS

Supply of MS sheet fabricated, dust and vermin proof cubical floor mounting type control panelmade out from 14 SWG MS sheet, copper busbars, having 1 no. incoming and 2 nos. outgoing (as per annexure)

Supply of fully automatic auto transformer type starter suitable for above motors having airbreak contactors, electroni timer, thermal over load relay, adequate size Aluminum bus bars, copper wound auto transformer and dulywired by copper leads/ wire, lugs, ON/OFF andreset switches and indicators etc. complete in all respects at Raw water

Supply of fully automatic auto transformer type starter suitable for above motors having airbreak contactors, electroni timer, thermal over load relay, adequate size Aluminum bus bars, copper wound auto transformer and dulywired by copper leads/ wire, lugs, ON/OFF andreset switches and indicators etc. complete in all respects at MPS & IPS

Supply & fixing of power wiring material such as 25 sq.m.m 3 Core copper conductor cable XLPE insulated cable for power wiring between the control panel and starter to motor. (FOR TWO RUNS) at Raw water, MPS & IPS

Supply & fixing of power wiring material such as 70 sq.mm. 3and half Core aluminum onductor cable XLPE insulated , cable for power wiring between power transformer and contrl panel at Raw water, MPS & IPS

Jointing material for wiring connection including lugs, thimble , insulation tapes, nutt bolts etc. at Raw water, MPS & IPS

Double loop earthing of all electrical equipmentswith supply of material such as G.I earth strip, earth plate, GI funnel, charcoal, Salt watering pipe etc. including digging of pits and refilling complete at Raw water, MPS & IPS

Supply of main piping and valves comprising of the following at Raw water 100 mm dia CI D/F sluice valve PN-1.0-02 nos. 100 mm dia CS D/F sluice valve class 300 ASA-05Nos. Following MS pipes, reducers, tapers, bends, tees and other specials required as per site conditions including necessary nos. of nuts and bolts and high pressure packing i-MS Plain pipe of 80 mm dia 4.80mm thick -6Mtr. ii-MS Plain pipe 80 mm dia 7.1mm thick-12Mtr. iii-MS DF reducer 80 mm xpump outlet size-1 No. iv-MS DF 90 degree bend 80mm dia-2Nos. v-MS AF 80x80x80mm dia -2Nos. vi- MS Radial TEE 80x80x80-2 Nos. vii-MS flange 100mm dia -6 Nos. ix-MS flange 100mm dia -12 Nos. x-MS DF 90 degree bend 80mm dia - 2 Nos xi-MS Blind flange for 80 mm dia for delivery line -1 Nos.

Supply of main piping and valves comprising of the following at MPS & IPS 80 mm dia CI D/F sluice valve PN-1.0-02 nos. 80 mm dia CS D/F sluice valve class 300 ASA-05Nos. Following MS pipes, reducers, tapers, bends, tees and other specials required as per site conditions including necessary nos. of nuts and bolts and high pressure packing i-MS Plain pipe of 80 mm dia 4.80mm thick -6Mtr. ii-MS Plain pipe 80 mm dia 7.1mm thick-12Mtr. iii-MS DF reducer 65 mm xpump outlet size-1 No. iv-MS DF 90 degree bend 80mm dia-2Nos. v-MS AF 80x80x80mm dia -2Nos. vi- MS Radial TEE 80x80x80-2 Nos. vii-MS flange 100mm dia -6 Nos. ix-MS flange 100mm dia -12 Nos. x-MS DF 90 degree bend 80mm dia - 2 Nos xi-MS Blind flange for 80 mm dia for delivery line -1 Nos.

Supply of a set of pressure gauges (0-56) kg/cm^2 complete with control cocks and nipples including all necessary fitting etc. at Raw water, MPS & IPS

Tools (at Raw water, MPS & IPS) i. Grease Gun-1No. ii.D.E spanner set (8 Pcs)-1 set iii. Ring spanner - 1 set iv. Screw driver-1 set v. Insulated plier-1 Nos. vi. Adjustable wrench 150/200mm size-1 set vii.Tool box-1 No. viii.Bearing pulller -1 No. ix. Suitable Crimping tool -1 No. x. Pipe wrench 18" -01 No.

Rubber insulation sheet 2.0mx0.1mx25mm thick at at Raw water, MPS & IPS

Installation, commissioning and testing to work of entire equipment including pumps, motors, control panel, starter, and power wiring etc, at at Raw water, MPS & IPS

Provision of Sign Board

Provision of Material Testing

M/s M.C. GUPTA