Regrading internal drain sill levels and raising of existing low lying roads at LBS Nagar across bund service road, 62nd Division

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000m as per Technical Specification Clause 202 MORD / MORTH. For Brick masonary work

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000m as per Technical Specification Clause 202 MORD / MORTH. For CC

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000m as per Technical Specification Clause 202 MORD / MORTH. For RCC

Removal of wet silt and sludge by manual means from sullage drains with aid of baskets and vessels.

Conveyance of excavated earth for a lead of 2 KM including unloading, loading, spreading, sectioning etc., complete as directed by the departmental authorities.

Supply and delivery Quarry Dust for filling from approved quarry including cost and conveyance of all materials and labour charges including filling, spreading, sectioning, watering ramming etc., complete as per SS.

Providing concrete for plain concrete (M10) using 220 Kgs Cement, 40mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH.

Providing concrete for plain concrete (M20 Design mix) using 343Kgs Cement 20mm, 10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH. With form work

Supply and placing of the RCC M30 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Culvert Slab.

Providing High Yield Strength Deformed ( HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) Steel bars of SAIL / VSP / TATA (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming frills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work as per SS.

Construction of granular sub-base by providing HBG material confirming to Grading-III of MORT & H Table-400-1 including cost and conveyance of all materials to work site and spreading uniform layers with motor grader or by approved means on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete for finished item of work as per clause 401 MORTH (5th Revision) as directed by the Engineer-in-Charge.

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadam specification (5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.

Separation Membrane of impermeable plastic sheeting 125 micron thick

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. Unit = cum. including cost and conveyance of all materials and labour charges etc., complete.

Supply of bituminous hot sealing compound (grade-A ISI ) polysulphide and sealing the joints including cost and conveyance of all materials etc.but excl.labour charges for placing in position for contraction joints at 1.50 interval / for expansion joints/for longitudinal joints as per MORTH specification number 602-1 Rm

Manufacture, Supply & Delivary of manhole cover and frame manufacture as per BIS:12592 (Part 1& 2) any where in AP F.O.R.destination including loading, unloading & stacking, central exice duty etc., complete as applicable for 35EHD 560mm dia clear opening manhole cover & frame

Bailing of water with oil Engine including conveyance of Oil Engine to work site, including fuel and operational charges and wages for driver / Helper etc., complete as per specification.

Brick masonry work in cement mortar complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 MORD / 1300 MORTH with Second Class Bricks & Moulded Bricks (Brick masonry in CM (1:6))

Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per SS.

Supply, delivery and Lowering, laying of SWG pipes in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and hemp yarn including cost and conveyance of all materials etc., complete. For 100mm dia

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) For OD 110mm dia (6kg/sqcm) (MAT-07315)

Supply of SWG Saddles conforming to IS standards 150 x100 mm including cost and conveyance of all materials and labour charges for fixing etc., complete. (BMW-A.75)

Supply and Fixing of House Service Connections (HSCs) including all materials and labour charges etc., complete and as directed by the departmental authorities. For S/D of 1/2" HDPE Pipe