REPAIRS TO AREA DRAIN, FOOTPATH, HARDSTANDING AND MISC ALLIED WORKS AT BHUJ AND KHAVDA UNDER AGE B/R-II OF GE ARMY BHUJ

Amount

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. and M & L for precast cement concrete block masonry with solid blocks of PCC (1:5:10) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed exc 10cm in width and set and jointed in C M 1:6 complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces / stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing rubbish off the premises of cantonment complete all as specified and directed.

Demolition of reinforced cement concrete as in ground floor beams, chajjas shelves and other similar work, complete all as specified and directed.

M&L Reinforced Cement concrete M-30 Design Mix using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L Reinforced Cement concrete M-30 Design Mix using 20mm graded stone aggregate as in Walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L Reinforced Cement concrete M-30 Design Mix using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

S&F Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surfaces complete all as directed.

S&F Form work to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better flat fair finished surfaces complete all as directed.

S&F Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) flat fair finished surfaces complete all as directed.

S&F Form work to soffits of suspended slab and similar work n.exc. 200 mm thick (Horizontal or sloping) at flat surfaces complete all as directed.

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia , as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or reinforced concrete) 200 mm dia pipe of any description and in any position set and jointed in cement mortar and Supplying, fixing, jointing and testing reinforced concrete drain pipes 200 mm bore, class NP-2, laid and jointed with collar in CM 1:1 complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or reinforced concrete) 300 mm dia pipe of any description and in any position set and jointed in cement mortar and Supplying, fixing, jointing and testing reinforced concrete drain pipes 300 mm bore, class NP-2, laid and jointed with collar in CM 1:1 complete all as specified and directed.

M & L for concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) including packing under and hauching against the side of the pipes after they are laid tested for pipes of 200 mm dia complete all as specified and directed

M & L for concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) including packing under and hauching against the side of the pipes after they are laid tested for pipes of 300 mm dia complete all as specified and directed

M & L for 100mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in sub base/hardstanding and finishing top surface even and fair complete all as specified and direccted.

M & L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in sub base and finishing top surface even and fair complete all as specified and direccted.

Dismantiling of stone slabs and tiles (Kota/ Granite stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and S & F 60 mm thick, machine made, Ist quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles of triangular / zigzag / hexagonal / I in shape or shape and designe as approved with grey cement and pigment conforming to IS-15658-2006, M-35 grade laid over and including 25 mm thick sand cushioning and the voids shall also be filled with fine sand complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota/ Granite stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and S & F 80 mm thick, machine made, Ist quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles of triangular / zigzag / hexagonal / I in shape or shape and designe as approved with grey cement and pigment conforming to IS-15658-2006, M-40 grade laid over and including 25 mm thick sand cushioning and the voids shall also be filled with fine sand complete all as specified and directed.

Forming contraction (Dummy) Joints 65mm deepx10mm wide filled with sealing compound Grade 'A'

Dismantiling of tiles of any discription or any thickness in floors, aprons etc. laid bedded and pointed in any mortar and disposing off rubbish off the premises of cantonment and S & F chequered cement concrete tiles 300 mm x 300 mm x 20 mm thick set, jointed and pointed in cement slurry in floors with grey cement and pigments over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in foundations, fillings and mass concrete etc complete all as specified and as directed.

Excavating over areas not exceeding 1.5 mtr deep and getting out in hard / dense soil complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.

Removing excavated material of any type of soil not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in benching, surface channels including fair finishes of surfaces, chamfering, throating and weathering and necessary form work complete as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping and finishing the exposed surfaces even and smooth by using extra cement including necessary form work complete all as specified and directed.. Note: From work required for these items included in the unit rate of this item

M&L Boulder pitching, laid dry, hand packed tightly, as in wire crate apron bunds complete as specified and directed. (Wire crate measured separately)

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as directed. Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

Ahmed B Khatri