Provision for installation Testing and Commissioning of 2 Nos 175 HP pump set at Suken pump house Ranibandh Rajgangpur for Improvement of WS to to Rajgangpur Town

Supplying all labour, materials and T&P for supply and installation of reputed make, centrifugal pump set with proper allingment, without control pannel including commissioning and testing, cost, carriage & conveyance of all materials to the work site etc. all complete as per the direction of Engineer - in - charge. (with min. Head 80mtr & Discharge 625cum/hr.) 175 HP - 2 Nos

Supplying all labour, materials and T&P for supply, fitting and fixing of reputed make, Star Delta Control Pannel with APFC arrangement for 175HP pump set including commissioning and testing, cost, carriage & conveyance of all materials to the work site etc. all complete as per the direction of Engineer - in - charge. 175 HP - 2 Nos

Supplying all materials, labour and T&P for laying of 120sqmm 3core unarmoured LT power Alluminium cable, copper conductor XLPE insulated cores laid up, PVC Innersheathed, armoured, 650v/1100 v Grade as per IS 7098 (Part 1) 1988 with upto date amendments including cost, carriage and conveyance of material to the work site etc. all complete as per specification and direction of Engineer - in - charge. 300 Sqmm

Supplying all labour,T&P, materials for laying of M.S.Pipes of all classes of the following outside diameter including one coat priming and two coat enamel painting as per specification complete including cost of M.S. pipe and specials. 219.10 mm Outer dia (6.30 mm thickness)

Supplying all labour, materials and T&P for flame cutting through gas cutter and facing of MS plate up to 8 mm thick at worksite as per the direction of the Er-in-charge. 219.10 mm Outer dia (6.3 mm thickness)

Supplying all labour,T&P, materials for providing joints by welding with two welding beads/pass confirming to IS:816 - 1998 (Fillet welding) to MS Pipes and fittings at site by using welding generator including testing of joints, as per specification and direction of the Er-in-charge 219.10 mm Outer dia (6.3 mm thickness)

Supplying all labour,T&P, materials for providing, fixing of D.I. Mechanical Joint collar confirming to IS: 13382/ 92 to flanged ends of Cast Iron pipes or Ductile iron pipes of the following nominal diameter including testing of joints and cost, all taxes, carriage & conveyance of all materials to the work as per specification etc. all complete as per the direction of Engineer - in - charge. 200 mm Dia. D.I. Mechanical Joint collar

Supplying all labour, T&P, materials for fitting and fixing of flanged joints to flanged cast iron pipes and fittings of the following nominal diameter including testing of joints, cost of bolts and nuts and rubber insertion as per specification all complete 200 mm Dia. M.S Flange

Supplying all materials, labour and T&P fitting and fixing of (PN-1.6) cast iron Non Rising Spindle type Sluice Valve conforming to IS 14846/non return valve with double flanged ends for water work purposes as per specification for the following rating and nominal diameter including testing and supply all sluice Valve/non return valve, nut and bolts, ruber insertion etc. all complete as per direction of Engineer-in-Charge. 200 mm dia DI Resilient Seated Glandless Sluice Valve with double flanged ends for water works purposes conforming to IS 14846 - 2000 (VAG/TALIS) (PN 1.6)

200 mm dia Cast Iron, Double flanged swing type non return valves IS: 5312, Part - I, Flanged ends. (PN 1.6)

Dewatering with using of 5HP disel pump including cost of POL during inter connection and leak repair (300mm dia pipe)

Supplying all labour, materials and T&P for engagement of hydraulic Excavator of 2cum bucket including hire charges, conveyance, carriage overhead charges and contractor profit etc all complete as per the direction of Engineer - in - charge. Conveyance of pump and motor