PROVN OF LT CABLE (SECONDARY SOURCE) FOR LOCALIZER AND GLIDE PATH OF MAFI SYSTEM AT AF STN BHUJ

Amount

Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 95 sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, in soft disintegrated rock not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engineer-in-Charge.

Material & labour for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches well ramming and spreading in layers complete all as specified and directed by Engineer-in-Charge.

Material & labour for unreinforced precast concrete cable covers CLASS LV type II, flat size 300 x 180 x 40 mm laid transverse to cable complete all as specified and directed by Engineer-in-Charge

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.

Material & labour for heat shrinkable indoor/ outdoor LT end terminations for LT 1100 Volts grade, aluminum conductor including jointing kits, aluminium ferrules and labour complete for making joints and testing cable size upto 70 to 120 Sqmm, 4.0 core complete all as specified and directed by Engineer-in-Charge

Material & labour for straight through joint (epoxy) for LT 1100 Volts grade, aluminum conductor including jointing kits, aluminium ferrules and labour complete for making joints and testing cable size 70 to 120 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply & fix GI tubing light grade for encasing cables for mechanical protection, laid under plinth/floors/ roads/ path /culverts or fixed on walls/on poles by means of MS/GI clamps with necessary bolts, nuts and washers size of 50mm bore complete all as specified and directed by Engineer-in-Charge.

Material & labour for boring under roads / pavement / hard standing without disturbing the top surface by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure for passing through the cables complete all as specified and directed by Engineer-in-Charge. Note : Rate quoted for T&P are deemed to be included in quoted rate.

Material & labour for erection of precast LT cable route / cable path indicator,made out of PCC 1:2:4 ,type BO,12.5 mm using graded stone aggregates of size 100 Cm (Height) x 12 Cm (Width) x 8 Cm (Thichness), painted with orange colour lettering synthetic paint and letters 4 inch "LT CABLE" to be written with black colour lettering synthetic paint and embedded in PCC block 1:3:6 type C2 (using 40mm graded stone aggregate) of size 15cm x 15cm x 20cm including necessary excavation for PCC block, placed at interval of every 30 M complete all as specified and directed by Engineer-in-Charge.

JYOT ENTERPRIES (BID ID -3251481)

Anil Builders (BID ID -3250832)

JAMDAGNI ENGG WORKS (BID ID -3251280)