Loading…
Loading…
Tender Value
₹15.0 L
EMD Value
₹15,010
Closing Date
18 Jun 2026, 4:30 pm
Sri Lingodbhava Swamy Temple, Chandole(V), PV Pale
Sri Lingodbhava Swamy Temple, Chandole(V), PV Palem (M), Bapatla District
Improvements to Sri Lingodbhava Swamy Temple, Chandole(V), P.V.Palem (M), Bapatla District
942592
P/COE/1066/2026
OPEN - NCB
Civil Works
BAPATLA
6 documents required · 5 mandatory · 1 optional
₹532
₹15,010
4 Jun 2026
4 Jun 2026
4 Jun 2026
( Improvements to Temple Sri Lingodbhava Swamy temple at Chandole Village ,P.V.Palem Mandal, Bapatla(D).)Earth work excavation for foundation and depositing at site with intial lead and lift in Loamy,clayey soils like black cotton,red earth and ordinary gravel including all operational,incidental,labour charges such as shoreing,sheeting,planking shuttering etc.,complete for finished item of work as per SS.
P.C.C(1:4:8) prop.nominal mix for foundation levelling courses and below flooring beds using 40mm size H.G.metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all taxes on all materials and all labour charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work as per SS
VRCC- M20 Nominal mix using 20mm size H.G m/c metal including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate,water etc., to site including cost of taxes on all materials and including steel centering,shuttering,machine mixing,laying concrete,vibrating,lift charges,curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work as per SS(Footings)
roof slab 5" thick
Providing Hysd steel bar of different diameter including cost and conveyance of all materials and all labour charges for cutting,bending to required size and shapes placing in position with cover blocks and tying with binding wire,forming grills for reinforcement work as per approved designs and drawings and including all wastages such as overlaps couplings,welded joints,chairs,spacers etc.,complete for finished item of work in all floors
Brick work with C.M(1:6) using 2nd class bricks from approved source including cost and conveyance of all materials like cement,sand,bricks,water etc.,to site including all taxes on all materials and such as labour charges like cement mortar mixing,scaffolding charges,construction of masonary,lift charges,curing etc.,complete for finished item of work.(Basement)
for superstructure
Brick work for partitiona walls with C.M(1:5) using 2nd class bricks from approved source including cost and conveyance of all materials like cement,sand,bricks,water etc.,to site including all taxes on all materials and such as labour charges like cement mortar mixing,scaffolding charges,construction of masonary,lift charges,curing etc.,complete for finished item of work.
Plastering 12 mm thick in CM (1:3) with sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves etc., complete for finished item of work.
Plastering 12 mm thick in CM (1:5) with sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves etc., complete for finished item of work.
Plastering 20 mm thick in CM (1:5) with sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves etc., complete for finished item of work.
Supply and fixing of aluminium anodised partition as per drawing using standard aluminium anodised section of 63.5 x 38.1 x 1.53 mm (Jindal-20047) thick fitted with MDF Board: Interior-Both Side Laminated -9 mm thick or equivalent PRELAMINATED particle board for full height with suitable aluminium glazing clips including cost and conveyance of all materials labour charges for manufacturing fixing in position using wooden blocks and sheet metal screw etc. to complete for finished item of work as approved by Engineer-in-charge
Teak wood Door Frames and shutters including all necessary Furniture and all necessary materials and all labour charges etc.,complete
Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).
Flooring with Vitrified tiles including cost and conveyance of all materials like tiles,cement, sand, water etc., to site and all operational, incidental charges on materials and all labour charges for marble laying,jointing,polishing,mixing mortar, finishing etc., complete for finished item of work as per SS
Providing skirting to internal walls to 10 cm height/risers of steps with vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
Providing dadooing to walls with Supply of screen printed glazed full body porcelain wall tiles of size 300 x600 mm with any type of design texturesuch as marble finish, wooden,bamboo,stone finishes etc.,scratch less,stainfree and thickness between 6-8 mm 1stquality of any colour and finish in all shades and designs as approved by the Engineer-in-charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.
Flooring with Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300mm and thickness between 7-8 mm and 1st quality of any colour and finish in all shades and designs 7.30mm thick , 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., and overheads & contractors profit complete for finished item of work.
Fabricating , supplying , erecting and fixing in position MS tubular steel trusses and roof frame work as per drawing enclosed with hot finished seamless type steel tubes conforming to IS 1161-1979 , consisting of principal rafters, struts, ties, purlins, wind barcers, cleats, holding down bolts, base please etc., complete , painted with one coat of zinc oxide including cost and conveyance of all materials to work site and all operational, incidental, lbour charges etc., complete for finished item of work.
Supply and installation of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM.Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns,(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including cost and conveyance of all meterials and labour charges ctc; complete per finished item of work; as per drawing and as directed by Engineer In-charge.
Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.
Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
Supply and fixing of wall mixer with provision for overheads shower and 115mm long bend pipe with wall flange jaquar make continetal series , chrome finish, and all albour charges etc., complete
Supply and fixing of 12.7mm NP bib taps Indian make heavy duty and all labour charges and contractor profir,etc/, complete
Supply and fixing of 12.7mm NP push cock Indian make heavy duty and all labour charges and contractor profir,etc/, complete
Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
Wiring with 2 runs of 22/0.30 (1.5 Sqmm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) : Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 module modular switch (Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/Kolors/ Vihan/Hosper/ Vimal make), Ceiling rose and modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings
Supply and fixing of 6A/10A 3/2 pin 2 Module Modular socket with shutter (: Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/Koncept (Samrat/ Qura) / Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vimal make) with 6A/10A 1 way 1 Module Modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.
Supply and fixing of 16A/6A 1 way combi socket modular switch with shutter ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura) / Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vima make) with 16A/20A 1 way 1 Module Modular switch control on a separate metallic box of size 200x150x60mm made of 18SWG sheet steel box coated with two coats of zinchromate redoxide with 1 or 2 module cover frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.
Supply and fixing of HID / batten holder / slanting holder (Wipro/G.E./Phillips) in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED bulb with input voltage 90 to 300V Makes: Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska / Green Lites / Fortune Arrt / GoldMedal / Luker/Leo/Orbit /Rhino / GLO LED (for new installation) with all labour charges, Material etc., complete as per the directions of the Engineer in charge at site.
Supply and fixing of 1200mm (48") Sweep star rated ceiling fan with double ball bearings air delivery more than 200Cum/Min of makes:standard make Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium) models with suitable down rod covered with flexible pipe, 2 module modular type electronic Stepped type fan regulator ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura)/ Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ imal/ DEC(Unicus)/ Fybros/ Infinity make) with all standard accessories including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD70, .etc., complete for a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/ Jaquar/ HPL/ GM / GreenLites / Gold Medal/ Eveready/ Rhino/ Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ EVERLIGHT make) on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.
Supply and fixing of 25 mm outer dia 1.80 mm thick mediium grade with IS: 9537 part 3 regid PVC pipe (ISI mark) ( Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin makes) concealed in walls for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.
Supply and Run of 2 of 4.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution board to Lighting point Board.
Supply and fixing of 15W heavy duty LED Down lighter, suitable for Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 120 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips /Lighting Technologies(LT) / GE-Venture / Crompton / Wipro / Bajaj/ Havells / Halonix/Jaquar/HPL/GM b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.
Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Tender Document.docx
TENDER_DOCUMENT • 0.13 MB
BOQItems.xls
TENDER_DOCUMENT • 0.60 MB
CGF Sri LingodbhavaSwamy Temple.pdf
TENDER_DOCUMENT • 0.77 MB
Download all tender documents and submit your bid