SPECIAL REPAIRS TO OFFRS QTRS AT 23 (A) BN NCC CHIRALA

Amount

Taking down cement or cement lime plaster, any description, on brick walls including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling surface finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in two layers, first layer 10 mm thick in CM 1:6 and second layer 5 mm thick in CM 1:4 finishing fair and even mixed with WPC as per manufacturer's instructions complete all as specified and as directed. (Note : Supply of water proofing compound shall be measured and paid separately).

Supply only of integral water proofing compound of approved make complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and aprons removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed in cement mortar mortar 1:6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 300 x 200 size 7 mm thick in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick screed in cement mortar in cement mortar 1:4 complete all as specified and as directed.

M&L for 18-20 mm thick Granite stone slabs of any type machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutters from frame) not exceeding 1.5 sqm each including making good disturbed portions with PCC 1:2:4 type B-0 or in cement mortar 1:4 after removal of frames complete all as specified and as directed.

Taking down Shutters of any description complete all as specified and as directed.

S&F of Pressed steel frames 75 x 50 mm size for cup boards with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and as directed.

S&F of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze etc. divided in to squares, with plain chamfered or rounded, mitered and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

M&L for 18 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white laminations, including teakwood lapping on all edges, fixed with screws to timber frame work or to walls with booden cleats etc fixed in repairs in shelves of cup boards etc., complete all as specified and as directed.

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and as directed.

S&F of powder coated anodised aluminium window and ventilator glazed and Guzed shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/s (standard aluminium section of DG-2496 of sizes 39.4 x 17.7 mm and 1.2 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2Nos), suitable handle (1Nos) for each shutter complete all as specified and as directed.

S & F of Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beeds complete all as specified and as directed.

S&F of 4 mm thick Sheet Glass, ordinary quality and glazing with aluminium beads complete all as specified and as directed.

S&F of 4 mm thick Figured glass, pin hea type and glazing with aluminium beads complete all as specified and as directed.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section complete all as specified and as directed.

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section complete all as specified and as directed.

S&F of 150 mm long Aluminium alloy handles cast type anodised complete all as specified and as directed.

S&F 100 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-22 complete all as specified and as directed.

S&F 75 mm size Hasp and Staple aluminium anodised safety type with pin hinge including bolt to hinge plate and fixed with screws fixed in repairs complete all as specified and as directed.

S&F of 300 mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F of Mild steel 300 mm ,ordinary rat & tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

S&F of curtain rods (drapery rods) not less than 25 mm dia, anodised aluminium alloy with fixing brackets fixed in repairs complete all as specified and as directed.

S&F of factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawings complete all as specified and as directed.

S&F of Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawing complete all as specified and as directed. .

S&F as in repair vitreous china wash down water closet pan (pedestal pattern) white complete (excluding flushing cistern) including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium or aluminised hinging device complete all as specified and as directed.

S&F of 10 lit capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polythene of low/high density PVC 32mm dia for low level cistern complete, fixed in repairs, complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, white, flat back, of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, 32 mm dia chromium plated waste fitting and 40 mm bore PVC waste pipe complete all as specified and as directed.

S&F of CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed.

S&F in repairs of 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs of Angle valves 15 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F in Repairs 15mm bore fancy type chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for pipe or for unions with long shank and cup (concealed type) and fixed complete all as specified and as directed.

S&F in repairs 15 mm bore Bib taps, chromium plated, cast copper alloy, screwed down, screwed for iron pipe, complete all as specified and as directed.

S&F of PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F of Towel rail 600 mm long of PTMT minimum weight 190 gms, fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F of 20 mm outer dia 3 layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking up or down steel tubing and connections complete all as specified and as directed.

S&F of 25 mm outer dia 3 layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking up or down steel tubing and connections complete all as specified and as directed.

M&L for Preparing new or previously un treated surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather coat paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coats of exterior weather coat complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and pipes including dismantling of old pipes complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) bends any radius provided with access door, fixed in repairs complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) junction, single (Single T) equal or unequal provided with access door, fixed in repairs complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) Vent cowl fixed in repairs complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and pipes including dismantling of old pipes complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) bends any radius provided with access door, fixed in repairs complete all as specified and as directed.

M&L Stainless steel floor trap 75mm dia plain with grating including jointing with solvent cement , fixed in repairs complete all as specified and as directed.

Taking down and removing of existing water proofing treatment of any description completely, taking down of old cement plaster if any or roughening of surfaces and cleaning top surface of RCC slab with using wire brushes and water to remove all dust and loose particles etc complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:3 on roof/ concrete surfaces with using water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as spd and as directed. (Supply only of water proofing compound/admixture shall be measured and paid separately).

M&L for water proofing treatment with 4mm thick APP modified membrane weighing not less than 4Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 Gram/Sqm having softening point not less than 140 degree Celsius, longitudinal tensile strength not less than 300 N/Sqm, tearing strength of 180 N, laid after applying a coat of Bitumen Emulsion, Primer @ 0.20Kg/Sqm over the thoroughly cleaned surfaces to be water proofed. Membrane shall then be laid with 10Cm side overlaps and 15Cm end laps completely thermo fused by flame torch application as per manufacturer's instructions. Care shall be taken to avoid wrinkles while sticking the membrane on the bitumen surface. A coat of hot blown bitumen 90/15 shall be applied on top of the membrane @ 1.20 Kg/Sqm and finally finished with solar reflective aluminium paint @ 0.10 Kg/Sqm. The water proofing membrane shall be extended upto a height of minimum 30 cm on wall and inserted by cutting groove and filling with bitumen complete all as specified and as directed.

Supply only of liquid waterproofing compound of approved make complete all as specified and directed

Supply and fix Health faucet (for two in one) brass chromium plated with 1m long flexible PVC tube & wall hook complete all as specified and as directed. Make :- Parryware/Hindware/Kohler/ESSESS

KR ENTERPRISES

CIVILEC ENGINEERING WORKS

DHANA CONSTRUCTIONS

BEST ENGINEERING

Ruchira Associates

M/S SIRI BUILDERS