PROVISION OF INTERLOCKING TILES ALONGSIDE AUDITORIUM AND ATTACHED TOILETS FOR AUDITORIUM AT CGRA NALIYA UNDER AGE I CG JAKHAU

Amount

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, exc 1.5m wide and n exc 1.5m in depth; for foundation etc and n exc 1.5m in depth and getting out complete in hard/dense soil.

Returning filling in soft/loose soil incl. Spreading levelling, watering and well ramming in layers not exc. 25cm thick.

Removing excavated material exc. 50 M long depositing where directed.

M&L for cement concrete Type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete.

M&L for M-30 Cement concrete used 20mm graded aggregate as in foundation, including rafts footings, footing, foundation beams plinth beam and bases of columns and mass concrete.

M&L providing reinforced cement concrete M-30(20 mm graded aggregates) Columns pillars, piers, posts and struts.

M&L providing reinforced cement concrete M-30(20 mm graded aggregates) Beams, cantilevers, bressummers, lintels over 1.5m span.

M&L providing reinforced cement concrete M-30(20 mm graded aggregates) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L for hard core of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D-2 (40mm graded aggregate) as in sub base.

M&L for formwork to sides of concrete foundation,footings,bases of columns,raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or batter

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers,shelves including sup-ports, overhangs, etc. also spays between floors and beams, etc.

Use and waste of formwork to coloumns rough finished surfaces or concrete square, retangular etc

Use and waste of formwork to soffits of suslpended slabs such as roofs slabs, floor slabs, landings and similar work n.exc 200 mm thick (Horizontal or sloping)

M&L for precast cement concrete block masonry with solid block of PCC ( 1:5:8) exceeding 10cm in width and setting cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in two layers with 10mm thick in cement mortar (1:4) as 1st coat and 5mm thick in cement mortar (1:4) mixed with water proofing compound @ 3% by weight of cement as 2nd coat on brick or concrete wall surfaces, finished even and smooth without extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.

M&L for rendering 5mm thick on Ceilings on fair faces of brick work or concrete surfaces in CM 1:4 finishing the surface fair and even.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finishing the surface fair and even.

M&L for Preparing new plastered surfaces, priming plastered and other surfaces with alkali resistant priming paint, Distempering two coats to walls with oil bound distemper.

M&L preparing new plastered surfaces of walls and applying two coats of acrylic based paint (Exterior emulsion paint) over a coat of primer complete all as specified and directed.

M&L for preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Supply only Integral Water proofing compound.

M&L for CRS steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No.24 above but 6 to 8 mm dia.

M&L for mild steel TMT bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bend to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Digital Tiles size 1200x600 mm 8 to 10 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match existing shed laid over and including 15mm thick screed in CM (1:6) complete all as specified and directed.

M&L for Digital Tiles size 1200x600 mm 8 to 9 mm thick or nearest size set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat of CM (1:4) complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supply and fix in opening as per specifications complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F brass chromium plated Tubular towel rail 'D' type 20 mm did, 600mm long between flanges complete all as specified and directed.(Make : Jaguar Cat No: CAN-1111NM)

S&F, 600mm x 600 mm bevelled edge mirror 6mm with frame with chromium plated brass screws and cup washer of suitable section alround all as specified and directed.(Make : Prayag Cat No. BLM-02F, Jaguar, or equivalent)

S&F brass chromium plated health faucet with 8mm dia, 1.20mtr long flexible tube & wall hook (Make : Jaguar Cat No: ALD-573) as approved by AGE complete all as specified and directed.

S&F 15mm bore, bib taps, cast copper alloy, chromium plated with capstain head, fancy type,screwed down for iron/PVC pipes or union complete all as specified and directed. (Make : Jaguar Cat No: FUS-29037) as approved by AGE complete all as specified and directed.

Supply only pillar taps cast copper alloy with capstan head, chromium plated, fancy type with capstain heads, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.(Make : Jaguar Cat No: FUS-29001,29021) as approved by AGE complete all as specified and directed.

S&F stop valves, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed. (compatible with ALD-083,ALD-089&ALD-081)(Make : Jaguar Cat No: FUS-29083k)

S&F Angular stop valves, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed. (Make : Jaguar Cat No: VGP-81053)

Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.

S&F vitreous china wash basin, Table Top Basin, Shape - Rectangular,Size: 590x380x190mm white, complete all as specified and directed. Note:- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. (Make: Jaquar VGS-WHT-81931N)

S&F Soap Dish Holder cover complete all as specified and directed. (Make: Jaquar ACN-1131N)

S&F EWC Single piece-WC with UF seat cover hinges fixing accessories set cistern fittings size 355x655x755,P Trap -180mm of white colour with internal fittings complete all as specified and directed. (Make :- Jaquar LYS-WHT-38851P) as approved by AGE).

S&F stainless steel toilet paper with cutting edge cover complete all as specified and directed. (Make: Jaquar AQN-7753)

Supply only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Vitreous China urinals, size 485x310x710 type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).(Make: Jaguar Cat No. URS-WHT-132530)

S&F Vitreous China urinals sensotronic sensor flushing valve for urinal with completet kit (suitable for urinal Make: Jaguar Cat No. URS-WHT -0704)

39. S&F CP grating for Nahani trap/ floor trap of size 100 mm dia complete all as specified and directed.

M&L for Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed to walls, ceilings or in floors etc for following bore of pipe:-

15mm bore.

20mm bore.

S&F in repair, 500 litres rotational moulded, double layered, ISI marked, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 25 mm dia, ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repair, stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and directed for following bore:-

20mm bore.

25mm bore.

M&L for sand filling including spreading, levelling, watering and consolidation in layers n. exc 25cm.

M&L for 60 mm thick, M-35 grade, machine pressed precast concrete inter locking paver block using grey cement and pigment of any shape and size confirming to IS 15658-2006 complete all as specified and directed.

Removing excavated material exc. 50 M long depositing where directed.

S&F powder coated aluminium ventilator shutters with frame (aluminium section weighing 0.55Kg/m), fixed with out sash bars, openable type (Top hung) and glazing complete with 5.5mm thick coloured/tinted sheet glass with necessary clips, hinges, aluminium (anodised) peg stay 30 cm long-01 No. with aluminium (anodised) grill DG 101 made out of 7x4.50mm thick flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm all as specified and as directed (Make of Aluminium Sections: Jindal, INDAL & Hidalco)

Providing APP modified membrance of 3mm thick with non woven polyester reinforcement/mat (center core) by sealing all athe over laps of 100mm in length side and 100mm in width side of membrane by torching the same as per manufactures instructions over primed surfaces followed by mineral graval finish on top of APP membrane all as specified and directed.

M&L 20mm thick Granite (of any type) pre-polished in cooking platforms and like fixed with neat cement slury over with and including 15mm thck cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Rate quoted shall include the cost of semi rounding and finishing the exposed edge of platform slab

M&L for salt glazed stoneware drain pipes, 150mm internal diameter, grade 'A' laid in trenches and jointed complete all as specified and directed.

M&L for cement concrete (1:3:6), type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 150mm bore of pipe complete all as specified and directed.

Cutting into existing manholes for cnnecting new drain pipes, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cment concrete (1:2:4) type B1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for 150mm internal diameter of pipe complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even and fair and filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors as waste and vent pipes complete all as specified and directed.

S&F, 75 mm bore (SWR) PVC bends any radius complete as directed by Engr-in-Charge.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F, 110 mm bore (SWR) PVC bends any radius complete as directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

M&L 125mm/110mm dia PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.

S&F Vitreous China urinal, bowl I type (back or corner wall type ) of size- 420x395x635mm Cat No 54020102 snow white including necessary fittings (Make-Cera).

S&F Vitreous China wall partition for urinal size-90x320x720mm cat No 54090101 including snow white necessary fittings(Make-Cera).

E/M Items

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2.0 core 10 sqmm

Dry Sand filling in cable trenches for protection of cables with two layers below and above cable and punned down to speicified thickness complete all as specified and as directed. Note: Punned down thickness shall only be measured for payment.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, of size 250mm x 150mm x 40mm complete all as specified and as directed.

Supply and fix GI pipe light grade of 32 mm dia complete with elbows, couplers, etc and with MS clamps, nuts, bots, washers etc for fixing of pipe to wall/ floor and laying in trenches for cable protection complete all as specified and as directed.

Material and labour for point wiring complete with 1.5 sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR PartI) ISI marked with wall thickness not less than 1.8 mm inclduing conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 mm FRLS PVC insulated unsheathed copper earth wire inclduing sunken type galvanised steel terminal boxes electro plated of suitable size with bakelite white/ colored top sheet cover 3.0 thick for one light / fan point controlled by one switch and for / 5Amps independent socket (Make of cable - Polycab/Havells/Anchor)

supply and fix Switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed.

S&F ceiling rose, 3 plate / PVC/ Polycarbonate, isolated body complete all as specified and as directed.

S & F compact & decorative energy efficient self ballasted LED batten , aluminium extruded body with PC diffuser LED tube light fitting and decorative end caps suitable for 1X10/12 watt fitting 2 ft version including LED lamp 10 watt and making good of existing wall surface complete all as specified.Make:-C&S Cat part No.LTTB2F10WLED/Wand equivalent of Bajaj/philips.

S & F LED batten integrated channel 20 watt having input voltage AC90-300V, 50 Hz , 6500K ,extruded polycarbonate body with white acrylic cover tube light fitting wall mounted complete with rod, driver and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge. (Make: Havells LED Cat No LUMILINEBS20WLED865SPCWH and equivalent of Wipro/philips.

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 4 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / L&T)

S & F MCB ‘B’ series type suitable for 240 volts, AC supply 6 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F MCB ‘B’ series type suitable for 240 volts, AC supply 20Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

Supply and fix exhaust fan 250 mm sweep AC, 240 volts, Non-metal body fixed as per manufacturer's instructions, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable etc all as specified and as directed.

M&L Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4.0 mm (up to 7.5m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shwon in electrical plate no 3 of SSR part 1 including Charcoal, Rock salt, necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS bar 8mm dia 150mm c/c reingorcement, watering funnel, 15 mm dia light grade for protection of earth electrode, 20 mm dia for watering all as speicified and directed and tested on completion.

Krishna Engineering

NAVIN K LAKHANI

NEELKANTHA ASSOCIATE