Tender for providing SOP for the improvement of LWSS Karsog and its adjoining area to make to the level of NAC by Prov. 63 KVA 22/0.4 KV 22 KV HT line for proposed 63 KVA sub- Station at Mokshdham ( Imla- Bimla ) in Teshil Karsog, District Mandi(HP)

Erection Charges

Add Erection Charges ( Erec of 63 kva dtr, LT bx, MCCBswitch, cable, service cable energy meter ) as per Cost Data 2023-24

Add extra manual carriage charges for an Average Lead 1.000 Km. from Road Head to Site of Work as per Cost Data 2022-23. AVERAGE LEAD -0.560 Kms

Supply Part of Sub Station

Prov. RCC Muff with C:C filling 2000 mm length

Prov. M.S.C.I. X-Arm (100x50x5 mm),Length 2800 mm X 4 Nos.

Prov. C.I. X-Arm (75X40x6 mm) length 2800 mm X 4 Nos. for supporting D O Fuse Unit & G O AB Switch

Prov. C.I. X-Arm (100X50x5 mm) length 460 mm X 2 Nos. for supporting Main Chanel of transformer.

Prov. M.S. A.I X Arm (50x50x6mm) Length 2800 mm x1 for L A's + 2 Nos. Distribution Box.

M.S. Angle Iron (50X50X6 mm), Length: 2800 X 4 Nos.

M.S. Angle Iron (35X35X6 mm), Length: 460 X 2 Nos.

GO AB Switch Unit Handle supporting ( Channel iron (75x40x6 mm), length

Prov. G.O. AB Switch Unit ( 22 kV, 400A, 25kV)

Prov. D.O.Fuse Unit

Prov. Surge Arrester, 18 kV Station Class (Porcilain Type) L.A.

Prov. Stay Set complete

Prov. Pipe Earthing

6 SWG GI wire for earting

Prov. LT Distribution Panel Box with MCCB (40A, 25kA, 4P, 1No.) and SFU (16A, 4 No., rewirable)

Prov. ACSR Cond. 6/1/3.35 mm (50 mm2)

Prov. Half Clamp with Nuts & Bolts (M.S. Flat 50X6 mm)

Prov. Full Clamp with Nuts & Bolts (M.S. Flat 50X6 mm)

Prov. M.S. Nuts and Bolts of various sizes (galvanised/ Coated) (Preferably 16 mm ɸ or more (With Flat & Spring Washers))

Prov. Aluminium. Thimble

Thimble

Prov. Danger Plate ( 203x200x1.6 mm )

Prov. LT Cable (3.5 Core) 120 mm2

a) Prov. Aluminium Paint.

b) Red Oxide

Prov. L.T Switched Capacitors 9 -KVAr for 63KVA (rate per KVAr)

Prov. Chain Link Kencing, Angle Iron, Gate etc. for transformer Fencing. ( As per HPSR )Also include Civil work (Earth work in excavation by mechanical means (hydraulic excavator)/ manual means in foundation trenches or drains ( not exceeding 105 m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lifts upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50M(All kinds of soil).Providing and lying in position cement, concrete of specified grade excluding the cost of centering and shuttering-All work uotp plinth level :1:4:8(1 Cement: 4sand :8 graded stone aggregate 40mm nominal size). Providing and lying in position cement, concrete of specified grade excluding the cost of centering, reinforcement, finishing and shuttering-All work uotp plinth level :1:1.5:3(1 Cement: 1.5sand :3 graded stone aggregate 20mm nominal size).Steel work welded in built upsections/ framed work, including cutting,hoisting,fixing in position and applying a priming coat of approval steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings,brackets,gates and similar works.Providing and fixing G.I chain link fabric fencing of required width in mesh size 50X50 mm including strengthening with 2mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineere-in-charge. Made of G.I wire of dia 4mm.Providing and fixing ISI marked M.S pressed butt hinges bright finished with necessary screws etc. complete (100X58X1.90 mm).Also providing and fixing ISI marked oxisdised M.S. sliding door bolts with nuts and screws etc. complete:250X16 MM.

Prov.Dead End Clamp (Insulator Accessories )

Erection part of HT Line

Erection of Steel Tubular 9.00 Mtrs.Single Pole Str. a/w allied fitting

Erection of Steel Tubular 11 Mtrs. D/Pole Str. a/w allied fitting

Erection of H.T. Stay Set : Digging of pit, fixing of stay rod, nozzeling & tightening And filling of pit complete in all respect

Earthing :Digging of pit, Fixing of G.I. wire to the earthing system and filling of pit complete in all respect

Fixing of Jumper complete in all respect

Sagging of Conductor 1.00 Km. Single G.I. Wire/ AAAC/ACSR 20/25 mm2 : Laying, Stringing, Sagging & binding with insulator

Sagging of Conductor : 1Km Single ACSR/AAAC 6/1/3.35mm (50 mm2) : Laying, Stringing, Sagging & binding with insulator

Add extra manual carriage charges from Road Head to Site of Work for an Average lead 1.00 Km. as per C.D. 2023-24. AVERAGE LEAD - 0.500 km i.e ( M. Carriae = Line length x lead ) i.e M. Carriage = 0.650*0500 = 0.325Kms

Supply part of HT Line

Prov. RCC Muff with Concrete Filling 2000mm length.

Prov. ACSR Cond.6/1/3.35mm ( 50 mm2)

Prov. G.I.No. 6/ 8 SWG for Earth wire for S/T Pole ( double run through GI wire )

Prov. C.I.X-arm (100x50x5mm), Length(1800 mm ) for D. Pole / Dead pole Str.= 11*1.8 = 19.8 mtr

Prov. C.I. X-arm(100x50x5mm),Length: 2800 mm D.Pole Str. (13 nos * 2.8 = 36.4 mtr)

Prov. A.I.X-arm(100x50x6mm), Length: 3000 mm for Gaurding ( 3*10 = 30 mtr )

Prov. Belt Set (X-Bracing Set)M S A. Iron (50x50x6mm) Length: 1.5 mtr ( 18*1.5 = 27 mtrs )

Prov. Belt Set (X-Bracing Set)M S A. Iron(50x50x6mm) Length: 1.5 mtr ( 18*2.7 = 48.6 mtrs )

Prov. HT Stay Set Complete in all respect i/c Guy Assembly with Helically Fitting

HT Earthing Set complete

Prov. Full Clamp with nuts & bolts M.S. Flat 50x6 mm

Prov. Half Clamp with nuts & bolts M.S. Flat 50x6 mm

Prov. Earth/Eye Hook for Earth Wire

Prov. Danger Plate (250x200x1.6 mm)

Prov. Nuts & Bolts Of various sizes ( Gaivanised/ Coated) ( Preferably 16 mmɸ or more with flat and spring washers)

Prov. Barbed Wire

Prov. Alluminium Paint

Prov. Red Oxide

Prov D.O Fuse unit

Prov.Dead End Clamp (Insulator Accessories )

Erection Part of LT Line

Erection of Steel tubular pole 9mtr Long:Digging Of Pit,Drilling Of Holes In Pole X-Arm ,Erection Of Pole,Erec. Of X-Arm ,Shackle Insulator,Filling Of Pit And Ramming, complete in all respects

Fixing of Jumpers: Fixing of dead structure Jumpers Complete in all respects

Erection of LT Stay Set:-Digging Of Pit,Fixing of Stay Rod,Nozzeling & Tightening complete in all respects

Erection of Earthing Set:-Digging Of Pit,Fixing Of GI Wire To The Earthing System,Filling Of Pit complete in all respects

Sagging of Conductor . Single G.I. Wire/ AAAC/ACSR 20/25 mm2 : Laying, Stringing, Sagging & binding with insulator , complete in all respects

Sagging of Conductor : Single ACSR/AAAC 6/1/3.35mm (50 mm2) : Laying, Stringing, Sagging & binding with insulator complete in all respects

Add Extra manual carriage for average lead from road head to site of work. Average lead= 0.400 Km. ( M. Carriage = 0.4 * 0.08 = 0.032 km )

Supply Part of LT Line

Prov. R.C.C. Muff (2000 mm) with C. C. 1:2:4 for filling

Prov ACSR Cond. 6/1/3.35 mm (50 mm2)

Prov. G.I. Wire 8 SWG Earth wire

Prov. Shackle Insulator

Prov. D-Iron

Prov. L.T Stay Set

Prov. Stay Wire 7/3.15 mm (@6.0 kg per stay set)

Prov. Egg Insulator i/c Starp for Egg Insulator

Prov. Earth Knob

Prov. L.T. Earthing pipe

Prov. M.S. Nuts & Bolts off size@25kg for 3 Ph.

Prov. Alluminium Paint

Prov. PVC Spacer for 3 Ph.

Prov. C.I. X-Arm (75X40x5 mm) ( length 1.5 mtr + 0.2 mtr )

Red oxide of superior quality

Prov Full/Half Clamps [ 2 No for A.I + 1 No for Stay Set]

SATPAL (BID ID -498701)

Koyla Engineering Works (BID ID -500445)