CONSTRUCTION OF LAB AT KENDRIYA VIDYALAYA BHUJ UNDER GE ARMY BHUJ

Amount

M&L for Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slope & gradient and n.exc 10sqm on plan and n 'exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Excavation in trenches n.exc. 1.5m wide and exc 1.5 m & n exc 3m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slope & gradient and n.exc 10 sqm on plan and getting out in SDR ROCK complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming in layers not exc 25cm thick in soil in any depth complete all as specified and directed.

M & L for spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.complete all as specified and directed.

Removing excavated soil/ materials to a distance not exc 250 mtr but n.exc and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and directed. (Area of the sub structure in contact with backfill to be measured)

M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for Cement concrete in foundations, filling and mass concrete using type C2 1:3:6 (using 40 mm gradaed aggregate) complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Cement concrete type B-1,1:2:4 (using 20mm graded aggregate) 75 mm thick complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L TMT steel bard Gde 500 D, 5 mm dia and over upto including 10 mm dia as in stirupps, spacers and binders reinforcement cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L form work to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M & L Form work to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

M & L Form work to sides of pillars, posts, struts, piers, columns and stanchions. Square,Rectangle or Polygon complete all as specified and directed.

M & L for RCC M-30 (using 20mm graded Aggregates) in foundation, including rafts, footings, foundation beams, plinthbeams, bases for columns, etc, basement slab, under rimmed piles and mass concrete complete all as specified and directed.

M & L for RCC M-30 (using 20mm graded Aggregates) slabs supported on walls, beams and column in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for RCC M-30 (using 20mm graded Aggregates) chajjas complete all as specified and directed.

M & L for RCC M-30 (using 20mm graded Aggregates) beams, cantilevers, bressumers, lintel over 1.5 mt span complete all as specified and directed.

M & L for RCC M-30 (using 20mm graded Aggregates) column, pillars, piers, posts and struts complete all as specified and directed.

M&L for precast concrete block masonary with PCC solid blocks in 1:2:4 type B1 (using 20mm graded stone aggregate) exceeding 10cm in width andsetting in CM (1:4) complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm rendering in two layers with 10 mm with CM 1:6 & 5 mm thick with CM (1:4) with using water proffing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC paid seprately.)

Supply only Water Proofing compound complete all as specified and as directed.

M & L for rendering 10mm thick in cement mortar 1:6 on Block/Brick masonry surfaces of internal wall finished even and smooth complete all as specified and as directed.

M & L rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces as in ceiling. complete all as specified and as directed.

M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight. complete all as specified and as directed.

M&L in repairs App based polymeric membrane minimum weight 3.5 Kg/Sqm and Minimum 3 mm thick reinforced with polyester non wove fabric (Wt. not less than 150 gms/Sqm land on primed surface by torched application complete all as specified and as directed.

M&L cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with smart painting toolscomplete all as specified and as directed.

M & L for Providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.

Material & labour for machine cut kota stone slab size as in flooring, stair case landing. treads of steps, 18-22mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed.

S & F Powder coated Aluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

S&F steel ventilators with top hung glazed shutter including projecting type hinges with stel handle and steel peg stays complete with glazing bars, dovetailed or welded and including mild steel grills/ guard bars of approved design or pattern made of 12mm dia square bar incl one shop coat of redoxide primer.complete all as specified and directed.

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded .complete all as specified and directed.

M & L preparation of new steel suraface of any description over 10 cm width or girth not otherwise described and apply two coats of synthetic enamel paint complete all as specified and directed.

S&F figured glass 3 mm thick pin headed type and glazing with oil putty not exc 0.5 mm in each pane complete all as specified and directed.

S&F floor/nahani trap PVC 75 mm dia of out let with grating and jointing to waste pipe with solvent cement etc complete all as specified and as directed.

S&F Stop valves, ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia tubing pipe, high pressure, with crutch butter fly handle complete all as specified and as directed.

S&F UPVC ball valve with operating handle (stop valve) of size 1" (25mm dia) both ends threaded complete suitable for fitting with ASTMD-1785, Sch 40 UPVC pipes complete all as specified and as directed. (Make : Prince/Finolex/Supreme/Kisan)

Supply & fix in any length UPVC pipe manufactureed as per ASTM-D -1785 both ends threaded as per IS-559, Schedule -40 complete with fitting,fixed to wall/ceiling/floors in required length complete all as specified and directed of the following inner bore 15mm. (Make : FINOLEX/SUPREME/KISAN/PRINCE)

Supply & fix in any length UPVC pipe manufactureed as per ASTM-D -1785 both ends threaded as per IS-559, Schedule -40 complete with fitting,fixed to wall/ceiling/floors in required length complete all as specified and directed of the following inner bore 25mm.(Make : FINOLEX/SUPREME/KISAN/PRINCE)

S&F in repairs 15mm dia Bib taps cast copper alloy, with Chromiun plated crutch or butterfly handle screwed down,for iron pipe or brass ferule complete all as specified and directed. (Note: MAKE -CONFIRMING TO JAQUAR CAT PART-No. APR -101037)

Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete as as specified and directed.

S&F vitreous china wash basin white flat back size 580x450mm including bracket, including down pipe ,PVC connection pipe 15mm bore, and 32mm CP waste coupling incl pillar tap complete all as spcified and as directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, hoisted and fixed in position compolete all as spcified and as directed.

M&L for concrete bed to drain pipes in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) including packing under, and hauching against the side of the pipes after they are laid tested for pipes of 150mm dia complete all as spcified and as directed.

S&F jointing and testing for reinforced concrete drain pipes, 150mm bore, class NP-2, laid and jointed with collar in CM (1:1) complete all as spcified and as directed.

S&F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for fixing Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified and directed.

S&F PVC door/cup board shutter 30 mm thick consting of frame made out of MS tube for top and botom rail with PVC sheet strip 20 mm width suitable PVC sheet bedding complete fixing to frame etc complete all as specified and directed.

S&F Chalk board ,consisting of melamine Writing surface and frame made out of aluminium alloy,Hardboard Core & Virgin PPE-PS Corner with Dual sided white board with 2 chalk holder 1duster and 10 dust free chalk stick complete all as specified and directed.

S&F PINUP Board consisting of dual sided hanging clips surface and frame made out of aluminium alloy ,Hardboard Core and Virgin PPE-PS Corner complete all as specified and directed.

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size concealed type fixed on wall / fixed to surface ceiling with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like modular switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular type white plate/frame with suitable brass screws and cup washers.

(a) One light point controlled by one; one way switch complete all as specified and directed.

(b) One fan/exhaust fan point controlled by one, one way switch complete all as specified and directed.

(c) One 3 pin socket out let 5 amp point on the same board with 1.5sqmm complete all as specified and directed.

(c) One 3 pin socket out let 5 amp point on the same board with 2.5sqmm complete all as specified and directed.

(d) All as per Item no 60 here in before but of using FRLS cable of size 2.5 sqmm for phase and neutral and by using 2.5 sqmm FRLS cable for earth continuity all as specified and directed.(socket outlet 6A with 4 point max in one circuit)

(d) All as per Item no 60 here in before but of using FRLS cable of size 2.5 sqmm for phase and neutral and by using 4.0 sqmm FRLS cable for earth continuity all as specified and directed.(socket outlet 6A with 4 point max in one circuit)

S&F ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix socket modular , 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.

Supplying and fixing sheet metal enclosure powder painted for MCB DB vertical type TPN 4 way double door with dinrail and busbar with IP-43 protection with door earthing and isolated neutral bar and insulated busbar assembly including MCCB of 100 Amps complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed .

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic ballast, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A'

S & F Exhaust fan ventilator DX 300mm sweep ideal for mounting on glass/wooden window 220/230 Volts AC steel body and connecting up to the ceiling rose with flexible three core copper conductor of size 23/.0076 including provision to fix the ventiliar fan to the glass/wooden window/ by providing duitable fixing arrangement, farse nut, bolts etc complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) and making necessary connetion from ceiling fan to ceiling rose with PVC insulated FRLS 3 core 0.5 sqmm copper flexible conductor complete all as specified and directed by.

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 sqmm 4 core complete all as specified and directed.

Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete as specfied and as directed.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and laying GI tube light grade 40 mm bore complete all as specified and directed.

Supply and fixing in any length UPVC pipe manufacture as per ASTM-D-1785 as per IS-559, Sch-40 complete with fittings, laid in treanches in required length complete all as specified and directed by Engr-in-charge of following size of 25 mm dia complete all as specified and directed.

M & L for cutting the existing GI / PVC pipe 100 mm / 50 mm dia in position for insertion of new Tee for branch connection complete all as specified and directed.

S & F UPVC ball valve with operating handle (stop valve) of size (25 mm dia) both ends threaded complete suitable for fitting with ASTMD-1785, Sch 40 UPVC pipes all as specified and directed.

M/s Bombay Novelty Stores (BID ID -3159599)

MARA CONSTRUCTION CO (BID ID -3168335)

sudarshan builders (BID ID -3161844)