SPL REPAIR TO OR MD ACCN BLDG NO P-39, OR MD ACCN QTR NO. P-40/5,6, OR COOK HOUSE BLDG NO P-122 AND LPG GODOWN BLDG NO P-05 AT MIL STN BHUJ

Amount

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing and S & F Glazed Ceramic tiles of 450x300mm size and 6-7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F non skid ceramic coloured tiles square / rectangular area of each tile exc 0.06 sqm but not exc 0.11 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F non skid ceramic joint free coloured matt finish tiles square / rectangular area of each tile exc 0.11 sqm but not exc 0.18 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F non skid ceramic coloured matt finish tiles square / rectangular area of each tile exc 0.11 sqm but not exc 0.18 sqm and 6 - 7 mm thick as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M&L for providing 1 mm thick putty on newly plastered wall surfaces to prepare the surface even and smooth complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in one layers ie. Ist layer of 10 mm thick rendering in CM 1:4 ( this layer mixed with water proofing compound as per manufacturer's instructions) finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick in C M 1:3 on ceiling finished even and smooth without using extra cement and applying 3 coats of white wash on ceiling surfaces after preparation of the newly plastered surfaces of ceiling complete all as specified and directed.

Supply only water proofing compound (ISI Mark) complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement including preparation of newly plastered sufaces of walls & applying two coat of distemper oil emulsion paint white or tinted complete all as specified and directed.

S & F in repairs Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size not exceeding 1.50 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size exceeding 1.50 sqm but not exceeding 4 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

M & L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. in brick walls and making good, cutting not exc 10 cm girth complete all as specified and as directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window (any suitable track) with aluminium section weighing 0.55 kg / RM including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately under appropriate items of Sch 'A'.

M & L for anodised aluminium ventilator shutter any type of aluminium section weighing 0.55 kg/m (minimum thickness of powder coating 50 micron) including joining cleats, glazing clips, rubber neoprene packing, necessary hardware i.e. handles, barrel tower bolts, hinges etc, aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

M & L for powder coated aluminum grill of design No DG-104, 6.5 mm x 4.5 mm Section of decogrill or of equivalent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed.

S & F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm (weight not less than 600 gms / sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in the opening as per the specifications and drawing mentioned in section 8 of SSR-II complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per the specifications and drawing mentioned in section 8 of SSR-II complete all as specified and directed.

S & F 35 mm thick factory made IInd class hard wood (not less than Hollock wood) glazed and skelton shutters open rebated and prepare to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc {size of members of shutters as specified in clause 8.24 (a) of section 8 of SSR - I} supplied and fitted to chowkat complete all as specified and directed.

S & F 150 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F aluminum alloy handles 150 mm size cast type anodized complete all as specified and directed.

S & F butt hinges 100 mm long mild steel medium weight cold rolled complete all as specified and directed.

S & F butt hinges 75 mm long mild steel stainless steel medium weight cold rolled complete all as specified and directed.

S & F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repair PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F in repair sinks matt finish anti scratch stainless steel without drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. Make: Prayag/BlueStar (Silvershine)/Nirali(Glossy Finish)

S & F in repair vitreous china Corner wash basin, round, white, flat back , size 400mmx400mmx125mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota/ Granite stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and M & L Granite slab work 18 to 20 mm thick in floors steps, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed. (Note : No deduction shall be made for opening of sink portion and rate of cutting of hole for wash hand basin and setting the washhand basin in position shall deemed to be included in the quoted rate)

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar works complete all as specified and as directed.

S & F in repair tubular towel rail of Aluminium anodised , 20 mm dia, D type, 60 CM long between flanges complete all as specified and directed.

S & F in repair for swivel shower rose size 125mm of PTMT, any colour, for foxong with 15mm dia pipe, (minium weight 40gm) with and including Shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (min Weight 40gm) complete all as specified and directed.

S & F in replacement PVC connections 15/20 mm dia and 450 mm long with brass nuts complete all as specified

S & F in repair PVC (SWR) floor/Nahani trap 75 mm bore, plain with grating doom including jointing with solvent cement complete all as specified and directed.

M&L in repair PVC (SWR) gully trap trap 125/100 mm bore including jointing with solvent cement complete all as specified and directed.

S & F in repair Bib taps cast copper alloy screwed down high pressure with crutch or butter fly handle 15 mm bore of GI Pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair Stop valves concealed type, ISI marked cast copper alloy screwed down high pressure for 15/20 mm bore of GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and directed.

M & L for concrete bed to 150mm drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in Cement concrete 1:4:8 type D-2 (using 40mm grade crushed stone aggregate) complete all as specified and as directed.

Taking down eaves gutters and rain water/RCC pipes of size 110 mm of any pattern, of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) and S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

Taking down eaves gutters and rain water/RCC pipes of size 75 mm of any pattern, of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) and S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

S & F in repairs PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

S & F in repairs PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.

S & F PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

Taking up or down existing unserviceable mild steel water tubing and connections 20 mm dia, any grade, of any description or in any position including fittings and S & F (concealed / open) 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Taking up or down existing unserviceable mild steel water tubing and connections 25 mm dia, any grade, of any description or in any position including fittings and S & F (concealed / open) 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

M & L for Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M & L for Newly treated surfaces of wall with two coats of cement based paint over a coat of white chalking complete all as specified and directed.

M & L for Preparation of old decorated surface by complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers &providing 1 mm thick putty over the wall surface even and smooth and then finishing walls with Acrylic smooth exterior paint with additives if required.(minimum of Two coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm complete all as specified and directed.

M & L for Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of new painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in sub base/sunken floor filling and finishing top surface even and fair complete all as specified and direccted.

M & L for for special treatment of sunken portion of WCs and Bath room as per following stages: Note: Flat Plane area shall be measured and paid. Stage 1:- Demolition of WC including lime concrete and cement concrete etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc. Stage 2:- Providing 10 mm thick plaster in CM 1:3 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd and allow to dry for 8 hours under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufactutrer instruction Stage 5:- Filling the Same Portion with plain concrete 1:4:8 Type D-2 (This item of PCC will be measured and paid for separately as M & L under appropriate item of Sch 'A') Stage 6:- Making holes in wall and fixing 600 mm long 40 mm dia GI spout for draining the surplus water if any.

M & L for 10mm thick plaster in one layar in cement mortar (1:4) on concrete surfaces over roof slab finished surfaces even and smooth without using extra cemet over and including application of cement slurry @ 3kg/Sqm after cleaning, sweeping the old RCC slab to remove dust before application of plaster complete and M & L for water proofing treatment to roof slab by one coat of bituminous/polymerised primer conforming to IS 3384 @ 0.30 Ltr per Sqm and laying Acretic Polypropylane (APP) modified water proofing membrane weighing 3.5 Kg per Sqm with 3mm thick and minimum 75mm overlaps and minimum 100mm end laps sealed and bounded to the surface including finishing by applying aluminium paint @ 100 gram / sqm on roof or vertical surfaces complete all as specified and directed. [MAKE: SUPER THERMOLAY manufactured by M/S STP limited or MOPLY-FP manufactured by M/S Texsa India ltd or IWL (HYPERPLAS POLYSTER) manufactured by M/s IWL as approved by GE.]

Excavation in trenches in soft / loose soil not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out for taking out / laying of cables, erection of poles / strut / stays etc and not exceeding 10 sqm on plan complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.

Removing excavated material of any type of soil not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

S&F factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003(Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed.

S & F 30 mm thick factory made Flush shutters solid core construction with block board core and plywood face panels commenrcial face on both sides with lipping / frame to match with and including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled of size 125 mm complete all as specified and directed.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

Dismantiling of stone slabs and tiles (Kota/ Granite stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and M & L kota stone work 20 mm thick in floors steps, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed. (Note : No deduction shall be made for opening of sink portion and rate of cutting of hole for wash hand basin and setting the washhand basin in position shall deemed to be included in the quoted rate)

Dismantiling of stone slabs and tiles (Kota/ Granite stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and M & L kota stone work 20 mm thick in skirting/dado and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including palstering 10 mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed. (Note : No deduction shall be made for opening of sink portion and rate of cutting of hole for wash hand basin and setting the washhand basin in position shall deemed to be included in the quoted rate)

S&F of 25 mm Ball brass valves,high pressure,with polythene float and flynut complete,screwed for ironpipe or brass ferrule and fixed all as specified.

S & F in repair for plate rack made out of stainless steel of size 31 inch X 30 inch X 10 inch complete all as specified and directed.

Supplying, laying and spreading of Fine aggregate (sand) in floors for gas godown complete all as specified and directed.

Dismantling plain or corrugated A C or steel sheeting any guage, of any description and in any position as in roof coverings and S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed

Dismantling plain or corrugated A C or steel sheeting any guage of any description and in any position as in roof coverings and S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge / roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for and S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed

S&F for Mild steel, plain, black sheet 0.80mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed

S&F of Butt hinges 100 mm thick, medium weight, cold rolled mild steel and fixed by welding/bolting complete all as specified and as directed

S&F of Mild steel sliding door bolts 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed

S & F of 300 mm length of bolt ,Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed

M & L for Preparation of new painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection finishing the surface even and smooth w/o using extra cement complete all as specified and directed.

M&L for 50 mm thick cement cponcrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in flooring for sub base complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing rubbish off the premises of cantonment complete all as specified and directed.

S&F of 20 mm dia stainless steel curtain rod along with necessary brackets/supports as approved by Engr-in-Charge.

S&F of mild steel welded fabric of weight n.exc 4 kg/sqm fixed to steel/wooden members with spikes complete all as specified and directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M&L for precast cement concrete block masonry Type 1:3:6 using (16 mm graded aggregates) set in cement mortar 1:6, exc 10 cm complete all as specified and directed.

Material and labour for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I).

Supply & Laying un-reinforced precast concrete cable cover type-1 Class IV, size of 250 mm x 150 mm x 40 mm laid dry in trenches for under groung cable protection complete all as specifed and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody ot for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring for One light/fan/exhaust fan/buzzer point controlled by one,one way switch with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping/PVC Conduit of adequate size fixed on surface with PVC rawl plugs with and including Wooden Board/sunken type pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit/casing capping complete for one light/fan/exhaust fan point controlled by one; one way switch. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per item No. 91 here-in-before but One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per item No. 91 here-in-before but One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 91 here-in-before but with 2.5sq mm size FRLS PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S & F ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed.

S & F switch piano flush button single pole230 / 250 volts one way 5 Amps Complete all as specified and directed.

S & F socket outlet 5 pin 5 Amp, flush type complete all as specified and directed.

S & F switch socket combination multi-purpose two in one, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S & F bell push button single pole230 / 250 volts 5 amps Complete all as specified and directed.

S & F buzzer, ding dong AC 230 Volt single pole complete as specified.

S&F fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic ballast, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting complete all as specified and directed by Engr-in-charge

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply and fix Exhaust fan, steel body, steel body AC Single phase 230 V of size 300 mm sweep with blades, and frame and louvers complete all as specified and directed

Supply and lay pipe galvanized, "Medium class", including fittings 25 mm (1.0") dia complete all as specified and directed

Supply and fix PPR Gate valves (brass insert) of 25 mm bore complete all as specified and directed

Supply and fix PPR Gate valves (brass insert) of 50 mm bore complete all as specified and directed

M&L for cutting of existing for 50 / 100 mm bore DI/CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessory exvation and earthwork, dewatering etc,if any involed, complete all as specified and directed

Taking down carefully aluminium/copper submain wiring /cable including steel/PVC conduit complete and making good disturbed surfaces of walls, floors etc and M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 2.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, earthed of size 16 sqmm, 4 core laid in trenches / poles / fixed to walls etc complete all as specified and directed.

Taking down carefully MCBs, distribution boards/main switches of any type and size for replacement and Supply & fix for sheet metal enclosure powder painted for MCB DB TPN 4 way double door with IP-42 protection with Din rail and busbar Complete all as specified and directed.

Taking down carefully MCBs, distribution boards/main switches of any type and size for replacement and Supply & fix for sheet metal enclosure powder painted for MCB DB SPN 8 way double door with IP-42 protection with Din rail and busbar Complete all as specified and directed.

Supply & fix in repair MCB SP 230V 'C' series 6-32 Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

Supply & fix in repair MCB SPN 230V 'C' series 6-40Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

Supply & fix in repair MCB TPN 415V 'C' series 63 Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’ Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

M/s Bombay Novelty Stores