Laying of 200mm dia DI (K-7) pipe line in both side of Nimapada Main Road from RD-16/600 to 20/00 in connection with the work four lining of Pipili-Nimapada-Gop Road and laying of 150mm and 100mm dia DI-K7 pipe line in uncovered and newly developed a

Supplying all materials labour and T&P for cutting of M.S. plate from 8mm. Thick to 10mm. Thick plate including cost of all labour, T & P etc all complete as per the direction of Engineer -in charge.

Supplying all materials, labour T&P and earth work in all kinds of soil in foundation & trenches within 50m. initial lead & 1.5m. initial lift including levelling, dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth etc. all complete as per direction of the E.I.C.

Supplying all materials, labour, T&P and Laying in trenches centrifugally cast (spun) ductile iron pressure, socket & Spigot pipes, Class-K7 without cement mortar lining conforming to I.S. 8329 of the following nominal diameter as per specification,complete for push on rubber gasket jointing including testing etc complete as per direction of E.I.C.(including cost of K7 D.I Pipe)

200mm dia D.I. Pipe (K-7) =

150mm dia D.I. Pipe (K-7) =

Supplying all materials, labour T&P and laying in trenches C.I fittings like Tees, bend, socket, spigot etc. conforming to IS :1538 ( Part-XIX) of the following nominal diameter as per specfication complete.

200mm. to 300mm .dia. S/V. [0.75x0.75x1.485 mtr]

150mm dia D/I Sluice Valve - (P.N.-1.6 with wheel)- (IS 14866-2000)

Supplying all labour , T&P, materials for constructing brick massionary S.V. chamber internal size:-[0.75x0.75x1.485mtr] with Earth work in excavation, Cement concrete (1:4:8) with 40mm size hard granite metal, Fly ash bricks work in cement mortar (1:3), 12mm. thick cement plaster (1:3) on brick work,R.C.C. (1:1.5:3) with 12mm. size h.b.g. chips, Centering and shuttering, M.S. reinforcement @ 0.80 qntl./cum of R.C.C. item & Earth filling etc all complete as per P.H. specification and design all complete.(per each)

Supplying all materials, labour & T&P for refixing of 80mm thick factory made cement concrete interlocking paver block of M 35 grade and approved make varoety colour and size made by block making machine block making machine with strong vibraatory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of sand etc complete coarse sand , filling the joints with the sand etc all complete including cost conveyance, royalties and taxes of all materials and cost of all labour, etc. complete as directed by Engineer in charge.

80mm. to 150mm .dia. S/V. [0.75x0.75x1.225 mtr]

Supplying all materials Labour & T & P for Fixing DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) / N R Valves for water works purpose for the following rating & nominal diameters complete including cost of valve . (Make-VAG /TALIS/AVK/KIRLOSKAR/IVC/Hawle or equivalent make with approval of the authority) etc. all complete as per direction of EIC.

CI Double Air Valve (Standard) PN-1.6 @ 50mm dia Air valve

Supplying all materials, labour, T&P and making Tee connections of new C.I/D.I lines to the existing C.I/D.I pipe lines including earth work laying and jointing C.I. specials like Tees ,Bends and Collars and flanged tailpieces with molten lead, providing barriers and taking safety measures for traffic connection etc complete as per direction of E.I.C.

200mm dia Tee Connection-

Supplying all labour , T&P for refilling the pipe line trenches with excavated materials, well rammed etc. all complete as per the direction of EIC.

Supplying all labour , T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.

Supplying all materials, labour, T&P and making new house connections with 20mm dia ASTM PVC lines to the existing D.I pipe lines including fixing of ferrule and saddle etc complete as per direction of E.I.C.

200mm dia D/I Sluice Valve - (P.N.-1.6 with wheel)- (IS 14866-2000)

Supplying all materials, labour, T&P dismantaling of Paver block materials up a lead of 1000 mtr stacking serviceable and unserviable materials Separately including cost of all labour, T&P etc. all complete as per direction of Engineer-in-charge .

Supplying all materials, labour T&P and filling in foundatin and plinth with sand watered and rammed including cost of sand & labour etc. all complete.

Supplying all materials, labour T&P and Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .

Supplying all materials, labour & T&P for providing and laying of 80mm thick factory made cement concrete interlocking paver block of M 35 grade and approved make varoety colour and size made by block making machine block making machine with strong vibraatory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of sand etc complete coarse sand , filling the joints with the sand etc all complete including cost conveyance, royalties and taxes of all materials and cost of all labour, etc. complete as directed by Engineer in charge.

Supplying all materials, labour, T&P for Sinking of 100mm x 50mm size Tube well through hand boring (water jet) method with sanitary sealing with platform including P.H. drawing, design & spectification etc. all complete as per directions of Engineer-in-charge.

Supplying all materials, labour, T&P and repairing of the pipe line trenches in concrete road and asphalt road with C.C (1:3:6) and C.C ((1:11/2:3)) on top including preparations of base pipe lines and making good the damages etc all complete as per direction E.I.C.

Supplying all materials, labour, T&P and filling in foundatin and plinth with sand watered and rammed including cost of sand & labour etc all complete as per direction E.I.C.

Supplying all materials, labour, T&P and Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete as per direction E.I.C.

Supplying all materials and T&P for cutting CC / RCC through concrete breaker by engaging manual labour for laying pipe line and making good to the damages etc all complete and as per direction of Engineer -in-charge.

M.S.Work for culvert crossing & drain drossing-

Supplying all labour T&P and materials for laying of different dia M.S.Pipe including earth work excavation in pipe line trenches in all kinds of soil & refilling of the pipe line trenches with the excavated materials and welding the pipe line as per the site requirement and making Tee,Bends,& offsets and electric arc welding flanges& fitted with nut & Bolts& Rubber insertion including fitting & fixing of sluice valve & N.R. Vlave at site all complete as per the direction of Engineer-in charge.

200mm dia M.S.Pipe (219.1 mm (6.30 mm) )-

200mm dia M.S. Flange.(12mm thick)

150mm dia M.S.Pipe (168.3 mm) (4.50 mm) )-

150mm dia M.S. Flange.(12mm thick)

200x200x150mm dia M.S FlangeTee

200x200x100mm dia M.S Flange Tee

150x45°mm dia M.S Bend

100mm dia G.I. Pipe-

100x100x100mm dia M.S Tee

100x45°mm dia M.S Bend

Nut & Bolt-

Rubber Insertion:-

supplying all materials labour and T&P for cutting of M.S. plate from 8mm. Thick to 10mm. Thick plate including cost of all labour, T & P etc all complete as per the direction of Engineer -in charge.

Supplying all labour and T&P for welding of MS pipes & fittings by eletric arc welding at site including cost of materials ,labour and T&P etc all complete as per direction of Engineer-in-charge .

Laying of 200mm dia DI (K-7) pipe line in both side of Nimapada Main Road from RD-16/600 to 20/00 in connection with the work" four linning of pipili-Nimapada Gop Road.

Supplying all materials, labour T&P and earth work in all kinds of soil in foundation & trenches within 50m. initial lead & 1.5m. initial lift including levelling, dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth etc. all complete as per direction of the E.I.C.

ete.(per each) VAG /TALIS/AVK/KIRLOSKAR/IVC/Hawle or equivalent make with approval of the authority

150mm dia D.I. Pipe (K-7) =

100mm dia D.I. Pipe (K-7) =

Supplying all materials, labour T&P and laying in trenches C.I fittings like Tees, bend, socket, spigot etc. conforming to IS :1538 ( Part-XIX) of the following nominal diameter as per specfication complete.

150mm dia D/I Sluice Valve - (P.N.-1.6 with wheel)- (IS 14866-2000)

100mm dia D/I Sluice Valve - (P.N.-1.6 with wheel)- (IS 14866-2000)

Supplying all labour , T&P, materials for constructing brick massionary S.V. chamber internal size:-[0.75x0.75x1.485mtr] with Earth work in excavation, Cement concrete (1:4:8) with 40mm size hard granite metal, Fly ash bricks work in cement mortar (1:3), 12mm. thick cement plaster (1:3) on brick work,R.C.C. (1:1.5:3) with 12mm. size h.b.g. chips, Centering and shuttering, M.S. reinforcement @ 0.80 qntl./cum of R.C.C. item & Earth filling etc all complete as per P.H. specification and design all complete.(per each)

Supplying all materials, labour, T&P and making Tee connections of new C.I/D.I lines to the existing C.I/D.I pipe lines including earth work laying and jointing C.I. specials like Tees ,Bends and Collars and flanged tailpieces with molten lead, providing barriers and taking safety measures for traffic connection etc complete as per direction of E.I.C.

Supplying all materials, labour, T&P and Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete as per direction E.I.C.

100mm dia Tee connection-

Supplying all labour , T&P for refilling the pipe line trenches with excavated materials, well rammed etc. all complete as per the direction of EIC.

Supplying all labour , T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.

Supplying all materials, labour, T&P and making new house connections with 20mm dia ASTM PVC lines to the existing D.I pipe lines including fixing of ferrule and saddle etc complete as per direction of E.I.C. for 100mm dia pipe.

Supplying all materials, labour, T&P for Sinking of 100mm x 50mm size Tube well through hand boring (water jet) method with sanitary sealing with platform including P.H. drawing, design & spectification etc. all complete as per directions of Engineer-in-charge.

Supplying all materials, labour, T&P and repairing of the pipe line trenches in concrete road and asphalt road with C.C (1:3:6) and C.C (1:11/2:3) on top including preparations of base pipe lines and making good the damages etc all complete as per direction E.I.C.

Supplying all materials, labour, T&P and Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour etc all complete as per direction E.I.C.

Supplying all materials, labour, T&P and Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete as per direction E.I.C.

150mm dia Tee connection-

M.S.Work for culvert crossing -

Supplying all labour T&P and materials for laying of different dia M.S.Pipe including earth work excavation in pipe line trenches in all kinds of soil & refilling of the pipe line trenches with the excavated materials and welding the pipe line as per the site requirement and making Tee,Bends,& offsets and electric arc welding flanges& fitted with nut & Bolts& Rubber insertion including fitting & fixing of sluice valve & N.R. Vlave at site all complete as per the direction of Engineer-in charge.

150mm dia M.S.Pipe (168.3 mm) (4.50 mm) )-

150mm dia M.S. Flange.(12mm thick)

150x150x150mm dia M.S Flange Tee

150x150x100mm dia M.S Flange Tee

150x45°mm dia M.S Bend

100mm dia G.I. Pipe-

100x100x100mm dia M.S Flange Tee

100x45°mm dia M.S Bend

Supplying all materials, labour, T&P and Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete etc all complete as per direction E.I.C.

Supplying all labour and T&P for Welding of M.S. pipes & fittings by eletric arc welding at site including cost of materials ,labour and T&P etc all complete as per direction of Engineer-in-charge .

Laying of 150mm & 100mm dia DI (K-7) in uncovered & Newly devloped area in Nimapada NAC.

Supplying all material, labour, T&P & setting up boring equipments including erection of suitable staging for installation & dismantling & removing the same after completion of the work including transportation of boring equipments cleaning & levelling the site excavation of mud pit channels etc. complete as per direction of Engineer-in-Charge.

Supplying all labour, T&P & transporting the boring pipes & top casing grouting pipes, PVC pipes & fittings, PVC well screens, bentontie & gravels etc from block store to work site & return of departmental materials including loading & unloading etc. all complete as per direction of Engineer-in-Charge

Supplying all labour, T&P & drilling pilot bore not less than 102mm dia without casing pipes in all kinds of soil & rock for the following depths including of supply of necessary boring pipes, cutting equipments extra socket wherever required & withdrawing the boring pipes washing & keeping the bore clear for logging if required as per the direction of Engineer-in-Charge.(0 - 360 mtr)

Supplying all materials, labour, T&P and lowering the 500mm dia Top Casing Pipe into position and removing the same after use as per direction of E.I.C.

Supplying all required labour for logging the bore through departmental logging team ( till logging team arrives at the site, the contractor is to keep the bore intact by circulating mud, through the mud circulating system) and when the logging team arrives at the site, the contractor will withdraw the boring pipe with cutter etc. and keep the bore suitable for logging and supply required labour to carry out the logging operation.

Supplying all labour, T&P & reaming the pilot bore to the following sizes &depths without casing pipe including withdrawing the casing pipes washing the bore by means of pipe cylinder etc. complete as per the direction of Engineer-in-Charge.(0 - 360 mtr)

Reaming from 100 mm to 150mm dia from 0 m to 360m

Reaming from 150 mm to 200mm dia from 0 m to 360m

Reaming from 200 mm to 250mm dia from 0 m to 360m

Reaming from 250 mm to 300mm dia from 0 m to 360m

Reaming from 300 mm to 350mm dia from 0 m to 360m

Reaming from 350 mm to 400mm dia from 0 m to 360m

Reaming from 400 mm to 450mm dia from 0 m to 360m

Reaming from 450 mm to 500mm dia from 0 m to 360m

Supplying all labour, T&P & joining materials & lowering the PVC casing pipes, fittings & well screens in position including fitting fixing of centralizer, rubber packer, cutter plug & washing the bore as per direction of Engineer-in-Charge.

200 mm dia ND PVC Casing pipe from 0 m to 300m

300 mm dia ND PVC Casing pipe from 0 m to 300m

Supplying all labour, T&P & packing the bore with washed gravel (size P-6) around the pipe in good quality etc. all complete. (including cost of gravel)-for a depth of 30Mtr

Supplying all labour, T&P & grouting with cement slurry for sanitary sealing in bore around the upper most 3.00 mtr of 300mm dia PVC casing pipe properly etc all complete as per the direction of the Engineer-in-Chief. (including cost of cement )

Cleaning and developing the bore-well using diesel compressor continusly worked till clear and adequate discarge is obtained

Supplying all materials Labour & T & P and Fixing DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) / N R Valves for water works purpose for the following rating & nominal diameters complete including cost of valve . (Make-VAG /TALIS/AVK/KIRLOSKAR/IVC/Hawle or equivalent make with approval of the authority) etc. all complete as per direction of EIC.

300mm ND PVC ASTM Casing Pipe(Sch-80)

200mm ND PVC ASTM Casing Pipe(Sch-80)

200mm PVC Strainer

200mm Bed Plug

200mm ND PVC Short Piece (0.30Mtr)

200mm End Cap

O' ring & Annabond etc.

COMMISSIONING OF PRODUCTION WELL

Supplying all labour T&P and materials for laying of different dia M.S.Pipe including earth work excavation in pipe line trenches in all kinds of soil & refilling of the pipe line trenches with the excavated materials and welding the pipe line as per the site requirement and making Tee,Bends,& offsets and electric arc welding flanges& fitted with nut & Bolts& Rubber insertion including fitting & fixing of sluice valve & N.R. Vlave at site all complete as per the direction of Engineer-in charge.

100mm dia M.S.Pipe-(4.0mm wall thick)-

150mm dia M.S.Pipe (4.5mm wall thick)-

100mm dia M.S.Bend-

150mm dia M.S.Bend-

100mm dia M.S.flange (10mm thick)-

150mm dia M.S.flange (10mm thick)-

100mm dia M.S.off set bend-

150mm dia M.S.off set bend-

80mm dia G.I.Column Pipe(3mtr long)

80mm dia M.S.Bend with Flanges

100mm dia C.I. D/F Sluice Valve (P.N-1.0 with wheel)

150mm dia C.I. D/F Sluice Valve (P.N-1.0 with wheel)

25mm dia Single Air valve-

Fixing of 300mm dia casing pipe with C.C(1:2:4)

M.S.Clamp for 80" dia G.I.Pipe with 65x8mm M.S.Flat with Nut & Bolt.

15"x15" M.S.Bore cover

75x100mm dia M.S.R/S

Supplying all labour , T&P, materials for construction of internal size:-[0.75x0.75x1.225mtr] for 80mm dia to150mm dia S.V. chamber internal size:- with Earth work in excavation, Cement concrete (1:4:8) with 40mm size hard granite metal, Fly ash bricks work in cement mortar (1:3), 12mm. thick cement plaster (1:3) on brick work,R.C.C. (1:1.5:3) with 12mm. size h.b.g. chips, Centering and shuttering, M.S. reinforcement @ 0.80 qntl./cum of R.C.C. item & Earth filling etc all complete as per P.H. specification and design all complete.(per each)

ELECTRICAL & MECHANICAL WORKS

Providing ,Supplying all materials, labour and T&P for installation, testing & commissioning ATS Control Panel to Pump Chambers of C.T.Headworks with the foloowing accessories of reputed make For running of pump & Motor from 10H.P. to 15 H.P. as per ISI Specification complete as per direction of Engineer in charge.

M.S. Control Panel Box (size-0.90mx0.75m)-1no

Auto Transformer cosisting of 3nos coil suitable to run 10/15 H.P.Submerssible Pump & Motor-3nos.

COST OF MATERIALS

Procurement, Installation, testing & commissioning of star rating submerssible Pumpsets running with three phase current having discharge 30m3 to 50m3 per hour & head of 30mtr to 62mtr including taxes etc all complete. ( without control panel.)

44 Amp.Contactor-1no

Single phase preventer-1no.

125 Amp.H.M.Fuse link,Fuse base-3nos.

100/5 C.T.Coil-3nos.

125 Amp.TPN SwitchFuse unit-1nos.

100 Amp.3way connector-1no

0to 500 Volt meter-1no

0 to 500 Amper meter-1no

Red,Yellow, Blue big Indicator-3nos

On-Off switch-2nos

Over Load Relay 30 to 48 Amp. BCH. Make -1no.

Providing ,Supplying all materials ,Labour,and T&P fitting and Fixing of wall mounted unmanned control device with auto timer unit consisting of M.S.Box of required size to accumulate the following accessories to be installed at pump chambers of reputed make for running of Pump Motor complete as per specification.

Auto timing clock-1no.

Single phase preventer-1no.

MCB-1no

Red,Yellow, Blue big Indicator-4nos

Auto -Manual off on swich-1no

25 Amp.Contactor-2nos

Triangle off on swich-4no

Timer-1no.

Over Load Relay -1no.

Supplying all materials, labour and T&P for lowering of 15HP motor pump with 80mm dia column including pump motor assembling, cable jointing including cost of jointing materials with motor pump, control panel cable jointing & tesing at sitte etc. all complete.