19- Construction of Jyotiba Phule Gate on the main road in Matlabpur, Ward No. 40.

Earth work in excavation by mechanical means (fydmulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dresting of sides and ramming of bottoms, lift upto 15m

Providing and laying in position cement concrese of specified grade excluding the cost of centering and shuttering All work up to plinth level 148 1 Coment 4 coarse sand (zone-III) 81 graded stone aggregate 40 mni nominal

Brick work with common bant clay FPS (non modalar) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in

Plastering with coment mortar (16) 12mm thick on Brick work in JURIDIGITS ALDet technical

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1.2.4 (1 cement 2 coarse sand (zone-III) derived from natural sources 4 graded stone

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement with 1.1.53(1 cement

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balcomes, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral s

Steel reinforcement for R.C.C-work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Rume

Centering and shuttering including strutting, propping etc. and removal of form

Centering and shuttering Columns, Pillars, Piers, Abutments, Posts and Struts

Cening and shuttering Lintels, beams, plinth beams, girders, bressumers and cantileve

Centering and shuttering Suspended floors, roofs, landings, balconies and access platform

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab

مد 14 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, hacking filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement

Providing and applying white cement based pulty of average thickness | mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shade: New work 4 (Two or more coats applied @3.28 Itr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10.sqm

LIGHTRON Aluminium die casting housing IP 66 led post top lantern power

s/f stone name plate with letter writing complete all

Please Enable Macros to View BoQ information