E tender for AMC for Six ELL Cranes at NDV for a period of one year

Laying and Jointing PVC Pipe. Heading

AMC for 06 in nos. ELL cranes (Three 30 Ton Jessop make, one 80/10Ton Jessop make, one 10Ton Jessop make, one 30Ton Chitram make and one 15Ton Mukand make) of YU Department at ND (V) for a period of one year as per scope of work placed at Encl 1 to Part II of RFP

LIST OF CRITICAL/ MANDATORY SPARES FOR SIX CRANES ( for Sl.2 to 85) ELECTRICAL SWITCHES & FUSES:- similar/ equalent/ reputed make should be suitable to the existing system can be accepted after approved by user department MCCB 400 Amps, 415V, 50Hz,

Heavy duty switch disconnected fuse unit, Model: 3KL4130-1YA00, 400 Amps , 500V,50Hz,

PUSH BUTTON SWITCH BSA 10/LBO 500V 10A (RED & GREEN BUTTONS)

INDICATION LAMP WITH HOLDERS ( RED & GREEN ) PIN TYPE: 220V, 8W DSY 10-10B-15D

Current collector brush units of DSL system

Graphite copper carbon brushes, size: 150x100x30mm

PROTECTIVE PANEL HRC FUSES 400A, 415V

MH HRC FUSES 315A, 415V

LT HRC FUSES-250A, 3NH-1320, 3NA 1327

SLEW HRC FUSES - 125A, 3NH-18120

LUFF FUSES-160A, 3NH-1320, 3NA 1327

3 POLE MCB, 415V 25A,

3 POLE MCB, 415V 16A,

3 POLE MCB, 415V 32A,

3 POLE MCB, 415V 10A,

RUSTLIC AEROCELL BOTTLES ( EACH 500ML )

AIR BREAK CONTACTOR 3TF 56 , 400A COIL: 220 VOLTS, 50HZ.

AIR BREAK CONTACTOR 3TF 54 , 250A COIL: 220 VOLTS, 50HZ.

AIR BREAK CONTACTOR 3TF 52 , 170A COIL: 220 VOLTS, 50HZ.

AIR BREAK CONTACTOR 3TF 34 ,32A COIL -220V COIL: 220 VOLTS, 50HZ.

AIR BREAK CONTACTOR 3TF 47 , 70A COIL: 220 VOLTS, 50HZ.

AIR BREAK CONTACTOR 3TF 44 , 32A COIL: 415 VOLTS, 50HZ.

AIR BREAK CONTACTOR 3TF 44 , 32A COIL: 220 VOLTS, 50HZ.

AIR BREAK CONTACTOR 3TF 32 , 16A COIL: 220 VOLTS, 50HZ.

Contactor COIL: 220 VOLTS 50HZ, Model:3TF 56 , 400A

Contactor COIL: 220 VOLTS 50HZ, Model:3TF 54 , 250A

Contactor COIL: 220 VOLTS 50HZ, Model:3TF 52 , 170A

Contactor COIL: 220 VOLTS 50HZ, Model:3TF 34 , 32A

Contactor COIL: 220 VOLTS 50HZ, Model:3TF 47 , 70A

Contactor COIL: 415 VOLTS 50HZ, Model:3TF 44 , 32A

Contactor COIL: 220 VOLTS 50HZ, Model:3TF 44 , 32A

Contactor COIL: 220 VOLTS 50HZ, Model:3TF 32 , 16A

Male & Female Contacts set Model:3TF 56 , 400A

Male & Female Contacts set Model:3TF 54 , 250A

Male & Female Contacts set Model:3TF 52 , 170A

Male & Female Contacts set Model:3TF 34 , 32A

Male & Female Contacts set Model:3TF 47 , 70A

Male & Female Contacts set Model:3TF 44 , 32A

Male & Female Contacts set Model:3TF 32 , 16A

TIME DELAY RELAYS , KRTPN 600V MAX, COIL-220V,

TIME DELAY RELAYS , KRTPN 600V MAX, COIL-440V,

CT OPERATED BIMETAL RELAY WITH SINGLE PHASING PROTECTION(OLR) RELAY RANGE:40-63A

CT OPERATED BIMETAL RELAY WITH SINGLE PHASING PROTECTION(OLR) RELAY RANGE:63-100A

CT OPERATED BIMETAL RELAY WITH SINGLE PHASING PROTECTION(OLR) RELAY RANGE:16-25A

CT OPERATED BIMETAL RELAY WITH SINGLE PHASING PROTECTION(OLR) RELAY RANGE:25-40A

CT OPERATED BIMETAL RELAY WITH SINGLE PHASING PROTECTION(OLR) RELAY RANGE:115-180A

AC relay (Creep System), (As per fitted sample )

DC relay (Creep System), (As per fitted sample )

CARBON BRUSH HOLDERS WITH CARBON BRUSH FOR CREEP MOTOR

LT LIMIT SWITCHES AS PER EXISTING SYSTEM OF CRANES

HOIST LIMIT SWITCHES AS PER EXISTING SYSTEM OF CRANES

LUFF LIMIT SWITCHES AS PER EXISTING SYSTEM OF CRANES

BATTERY PACK (7.3 V, 600MA) OF RRC SYSTEM

Lighting transformer 415V /220V , 4 KVA

LED MARINE BULK HEAD WATER TIGHT FITTINGS WITH MESH COVER, 230V, 9W

LED FLOOD LIGHT FITTINGSA ALONG WITH ACCESSORIES, CLAMPS AND FIXTURES, 230V, 250W

LED TUBE LIGHT FITTINGS 12W,230V

4/4 JUNCTION BOXES AND FITTED WITH CABLE WATER TIGHT

CALLING BELL / LT WARNING BELL

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 125HP , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 25HP , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 20HP , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 55HP , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor , Capacity :17.5 HP Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 22.5HP (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 30HP , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 135HP , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 40HP , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Mechanical Items Brake liner 5mm thick and 300mm width

Brake liner 8mm thick and 300mm width

Brake liner 10mm thick and 300mm width

Brake liner 12mm thick and 300mm width

Brake band copper rivets as per existing system

WORM SHAFT BEARINGS:ALS:28

WORM WHEEL SHAFT BEARINGS:AMS-22

PLUMBER BLOCK BEARING NO. 22214(C)

PLUMBER BLOCK ASSEMBLY WITH BEARING AND SELF LOCKING FASTENERS AS PER EXISTING SYSTEM FOR JESSOP CRANES

LONG TRAVEL GEAR BOX WORK SHAFT AS PER EXISTING SYSTEM FOR JESSOP CRANES

LONG TRAVEL GEAR BOX WORK WHEEL ALONG WITH WORM WHEEL SHAFT AS PER EXISTING SYSTEM FOR JESSOP CRANES

POWER TRANSMIT END GEAR/PINION, NO. OF TEETH:18, PITCH:2.5” DP,PCD:7.2”, FACE:4.3”, BORE:3.25”, MAT:EN-17

BIBBY COUPLING SPRING FOR JESSOP T,MH AND LUFF DRIVE AS PER EXISTING SYSTEM

BIBBY COUPLING COVERS FOR JESSOP,MH AND LUFF DRIVE AS PER EXISTIN SYSTEM

ANTICIPATORY SPARES FOR MUKAND 15 TON CRANE AT N-14A JETTY (for Sl.86 to 524) GENERAL USING BEARINGS OF MOTORS, GEAR BOXES, PULLEYS WHEELS, PINS AND DRUMS OF MUKAND 15 TON ELL CRANE SPH ROLLER BRG. 22226 E

SPH ROLLER BRG. 22216 E

SPH ROLLER THRUST BRG. 29256 E

SPH ROLLER BRG. 23120 CC/W33

RADIAL SPH. PLANE BRG. GE 100

RADIAL SPH. PLANE BRG GE 120 ES 2RS

SPH ROLLER BRG. 2130

SPH ROLLER BRG. 24130

SPH ROLLER BRG. 24126

SPH ROLLER BRG. 22218

DEEP GROOVE BALL BRG. 6226

THRUST BALL BRG. 51317

SLEW BEARING (162.40.2800.990.41.1502)

SPH ROLLER BRG. 23952

SPH ROLLER BRG. 23038

SPH ROLLER BRG. 24136

SPH ROLLER BRG. 22220E

SPH ROLLER BRG. 22226E

SPH ROLLER BRG. 23940E

SPH ROLLER BRG 22224E

WIRE ROPE SLIDING MECHANISM COPPER ROLLER WITH PIN

LIMIT SWITCH OF MAIN HOIST

LIMIT SWITCH OF LT

LIMIT SWITCH OF LUFF

STEEL WIRE ROPE,DIA:40MM, CONSTRUCTION:34X7, TYPE OF CORE: STEEL CORE, 160 KG/SQ.MM, UNGALVANISED, BREAKING STRENGTH:81500KG(MIN)

FORGED HOOK ASSEMBLY

PLANETARY SLEW GEAR BOX, REDUCTION RATIO: 87.32

SHAFT OF DRIVING WHEEL

LT GEARED MOTOR ALONG WITH GEAR BOX

LUFF GEAR BOX, REDUCTION RATIO:23.5, TYPE: HELICAL

MAIN HOIST GEAR BOX, REDUCTION RATIO: 191.22, TYPE: HELICAL

SLIP RING BRUSHES

CENTRE COLUMN SLIP RING BRUSHES

SEMI CONDUCTOR FUSE

LINE CONTACTOR

AUXILIARY CONTACTOR

BRIDGE COOLING FAN

CRD BRUSH HOLDER WITH BRUSH

CENTRE COLUMN SLIP RING (POWER BRUSH ONLY)

FUSE (1 NO. EACH TYPE / RATING USED IN ONE CRANE)

RELAY, CONTRACTOR, TIMERS (100% USED IN ONE CRANE)

AXLE OF PLAIN WHEELS

FUSE 400A

MAIN HOIST GEAR BOX OIL SEAL 80X100X10

MAIN HOIST GEAR BOX OIL SEAL 220X250X15

MAIN HOIST ROPE DRUM ASSEMBLY, DRUM PCD : 960 MM

MAIN HOIST BRAKE DRUM DIA:400MM

MAIN HOIST EHT BRAKE DIA: 400MM

MAIN HOIST GEAR BOX GEARED COUPLING FG-4

MAIN HOIST MOTOR, FRAME SIZE: 280M, 6P, 52.1 KW, SQ CAGE

MAIN HOIST MOTOR GEARED ROTARY LIMIT SWITCH

LT PLAIN WHEELS, MAT: C-55, MN-75, DIA: 500 MM

LT DRIVE WHEELS, MAT: C-55, MN-75, DIA: 500 MM

LT PLAIN WHEEL AXLE, MAT: EN-9, DIA: 135 MM

LT WHEEL BEARING BLOCK, MAT: C.S, IS:1030

LT WHEEL BEARING COVER, IS;2062

PINION DRIVE SHAFT SPUR PINION Z=15, M=20, MAT: EN-353

PINION DRIVE SHAFT, MAT: EN-24

SLEW BEARING LYC, MAT: ASSLY

PINION DRIVE SHAFT ASSEMBLY, MAT: ASSLY

SLEW PLANNETORY GEAR BOX, GB TYPE-SC6003/FE/90.09/65.105, MAT: ASSLY

SLEW MOTOR, FRAME SIZE: 315 S, POLE-6, KW-71.1, SQ.CAGE

SLEW THRUSTOR BRAKE, DIA 300 MM, MAT: STD

SLEW BRAKE DRUM CUM COUPLING, DIA 300 MM, MAT: ASSLY

SLEW SLIP CLUTCH, NORMAL TORQUE 707NM, SLIP TORQUE 1200 NM(UNIQUE)

SLEW SLIP CLUTCH, NORMAL TORQUE 475 NM, SLIP TORQUE 855 NM(UNIQUE)

LUFF TELESCOPIC COVER, MAT: ASSLY

LUFF MOTOR, FRAME SIZE: 315 S, KW-52.1, 8 POLE, RPM: 720, MAT: ASSLY

LUFF EHT BRAKE DIA.400 MM, MAT: ASSLY

LUFF BRAKE DRUM, DIA.400 MM, MAT: IS:2707 GR-1

LUFF ROTARY LIMIT SWITCH

A – FRAME PULLEY ASSEMBLY, DIA : 900 MM, MAT: ASSLY

A – FRAME PULLEY PIN, DIA: 130 MM, MAT: EN-9

JIB HEAD PULLEY ASSEMBLY, DIA: 900 MM, MAT: ASSLY

JIB HEAD PULLEY PIN, DIA: 130 MM, MAT: EN-9

THY./DIO/MOD. SP, PART NO.68296871, PRODUCT TYPE: SKKH57/16E 3PCS SP KI.

THYRISTOR/DIODE M, PART NO: 68443032, PRODUCT TYPE: TD 162N16KOF 3PCS SP K.

THYRISTOR/DIODE M, PART NO:64635255, PRODUCT TYPE: TD 180N 16K OF 3PCS SP KI

IGBT -MODULE, PART NO 68647037, PRODUCT TYPE: FF300R 12KE3 3 PCS SP K.

IGBT- MODULE, PART NO 68683459,PRODUCT TYPE:FF400R12KE3 3 PCS SP K

FAN, PART NO.64408364, PRODUCT TYPE: 7114NHR-VAR 147.

FAN, PART NO.3AUA0000019968, PRODUCT TYPE: D1751S24B6CZ-16.

IGBT-MODULE, PART NO 68443075, PRODUCT TYPE:SKM195GB124DN 3 PCS SP

IGBT-MODULE, PART NO 68443181,PRODUCT TYPE:FF200R 12KE3 3 PCS SP K.

MCR, 4 STEP MASTER CONTROLLER, TYPE: MASTER CONTROLLER,

ABB VVVF DRIVE ACS800-04-100-3+L502+N652+J400+D150

ABB VVVF DRIVE ACS800-04-120-3+L502+N652+J400+D150

ABB VVVF DRIVE ACS800-04-135-3+J400+D150

ABB VVVF DRIVE ACS800-04-0050-3+J400+D150

REFERENCE SETTING BOARD, 5 STEP REFERENCE SETTING BOARD, TYPE: 5 STEP,

FUSE, 224A, 500V, DIN 01 3NA71420RC,

MINIATURE CIRCUIT BREAKER, DOUPLE POLE RATING -10A, C-CHARACTERISTICS, 10KA

TWIN TYPE HOLLOW SHAFT ENCODER, HOG10G DN 10241/DN 60 TTL,

POWER CONTACTOR WITH 2NO+2NC, COIL 110V AC, 50HZ, 3TF54,

POWER CONTACTOR WITH 2NO+2NC, COIL 110V AC, 50HZ, 3TF34,

OVERLOAD RELAY 3UA-62-30-5B,RATING 115-180A

CONTACTOR RELAY, 3NO+1NC, 3TH30,

ROTARY GEARED LIMIT SWITCH 10A, 500V AC/4NC

LUBRICATION MOTOR, 0.55KW PUMP MOTOR,

2 WAY ROLLER LEVER TYPE LIMIT SWITCH: LOCK 10A, 500VAC:2NC

SINGLE PHASE TRANSFORMER, 415/240V, 500VA

CONVERTOR MODULE ,ACS 800,

CONTROL PANEL, CDP-312R,

120 SQMM, 4 CORE BUTY RUBBER INSULATED COPPER FLEXIBLE TRAILING ERP/TRS CABLE WITH HEAVY DUTY SHEATH, 1100 V, OIL AND FLAME RESISTANT

LUFF GEAR BOX OIL SEAL 80X100X10

LUFF GEAR BOX OIL SEAL 280X320X20

LUFF GEAR BOX OIL SEAL 20X320X20

ANTICIPATORY SPARES FOR CHITRAM 30 TON CRANE AT N-17 JETTY MCCB DOUBLE POLE 16 AMPS

FUSE SWITCH UNIT; RATING: 630A, 415V, 3POLE

MCCB DT-400;RATING : 400A, 3 POLE WITH SHUNT RELEASE AND UNDER VOLTAGE RELEASE

AIR BRAKE CONTRACTOR (3TH31); RATING : 16A, 3NO + 2NC, COIL – 220V, 50HZ.;

MAGNETIC OVER LOAD RELAY; RATING: 45-56 AMPS, 3 POLE; SETTING RANGE: 100% - 125%

MAGNETIC OVER LOAD RELAY; RATING: 31-39 AMPS, 3 POLE; SETTING RANGE: 100% - 125%

FOOT OPERATED LIMIT SWITCH (PUSH BUTTON TYPE 1 NO)

25 A TP ISOLATOR WITH MECH.DOOR INTERLOCKED;TYPE ; 3LAO 205-4YA ;

AIR BREAK POWER CONTACTOR WITH 2 NO+2NC;32 AMPS ; COIL – 240 V; 50HZ ;

T P BIMETAL O/L RELAY WITH 1NO+1NC ; 6.3 – 10 AMPS ;

D.P CONTROL SWITCH;16 AMPS ; TYPE; 3 LAO 201-1YA

CONTROL TRANSFORMER 300 VA ;415 V / 240 V; TYPE ; AIR COOLED

TIME DELAY RELAY; 0.5 – 60 SEC.TYPE - KRPTN 10 ;

MAIN HOIST BRAKE DRUM 500 MM DIA, 68 KG AS PER EXISTING SYSTEM

LUFF BRAKE DRUM 300 MM DIA, 34 KG AS PER EXISTING SYSTEM

SLEW BRAKE DRUM 300 MM DIA, 34 KG AS PER EXISTING SYSTEM

LT BRAKE DRUM 300 MM DIA, 34 KG AS PER EXISTING SYSTEM

LT GEAR PINION 15T 12M, IS1030, MAT: C-55MN, HT TO 80KG/SQ.MM

LT GEAR 56T 12M, IS1030, WEIGHT :70KG/SQ.MM

LT REDUCTION GEAR BOX (RADICON WORM REDUCTION BOX, SIZE: 1000, TYPE-V, 25:1,

LT GEAR BOX WORM WHEEL ALONG WITH SHAFT AS PER EXISTING SYSTEM

LT GEAR BOX WORM SHAFT AS PER EXISTING SYSTEM

MAIN HOIST REDUCT ION GEAR BOX AS PER EXISTING SYSTEM

LUFF REDUCTION GEAR BOX AS PER EXISTING SYSTEM

SLEW REDUCTION GEAR BOX (RADICON WORM REDUCTION BOX, SIZE: 1200, TYPE-V, 30:1,

SLEW FLUID COUPLING TYPE FCU SIZE 17.75

LONG TRAVEL PLAIN BOGIE WHEEL 800MM DIA AS PER EXISTING SYSTEM

LONG TRAVEL DRIVE BOGIE WHEEL 800MM DIA AS PER EXISTING SYSTEM

STEEL WIRE ROPE LENGTH = 310 MTRS, LAY OF ROPE = RIGHT HAND LAY, WIRE ROPE DIA = 32 MM.CONSTRUCTION = 6X36, TYPE OF ROTATION = NON-ROATION, TYPE OF CORE = IWRC, MINIMUM BREAKING STRENGTH = 60.8T, TENSILE STRENGTH = 180 KG/SQ.MM, TYPE OF LUBRICATION = PETROL BASED, ATTACHMENT OF ENDS = END FREE.

MAIN HOIST MOTOR HP:135, NO.OF.POLES:6, RATING: 60% CDF, FRAME SIZE: 355M(310X320), STATOR VOLTAGE: 415V, RPM: 970,

SLEW MOTOR HP:30, NO.OF.POLES:6, RATING: 40% CDF, FRAME SIZE: 225 S, , STATOR VOLTAGE: 415V, RPM: 970,

LONG TRAVEL MOTOR HP:22, NO.OF.POLES:6, RATING: 40% CDF, FRAME SIZE: 200L,STATOR VOLTAGE: 415V, RPM: 970,

LUFF MOTOR HP:135, NO.OF.POLES:6, RATING: 40% CDF, FRAME SIZE: 3/5 S, STATOR VOLTAGE: 415V, RPM: 970,

GEAR BOX BEARINGS SKF: 2216

SPH ROLLER BRG. 22232

PH ROLLER BRG. 22218

LIMIT SWITCHES MAIN HOIST LIMIT SWITCH ( MOUNTED LIVER TYPE )

LUFF LIMIT SWITCH ( MOUNTED LIVER TYPE )

LONG TRAVEL LIMIT SWITCH (16 AMPS,500V 1NO+1NC)

TRANSFORMER CONTROL TRANSFORMER FOR CRD SYSTEM 300 VA , 415/240V (AIR COOLED)

LIGHTING TRANSFORMER 4.5 KVA , 415/240V

MCCB RATING: 400A TYPE – TP

MCCB RATING: 315A TYPE – TP

SWITCH FUSE UNIT RATING: 200A TYPE – DIN

S.P. MCB FOR CONTROL - 6A;(INTERLOCK CIRCUIT, PANEL ACCESSORIES, SMPS SUPPLY);

TRANSFORMER ; RATING: PRI.: 0-380-415-440V; SEC.: 0-220V-230/6A;

SMPS POWER SUPPLY: RATING: 10A @ 24V DC

AIR BRAKE CONTACTOR – 16A;CONTROL 2NO+2NC, COIL- 230V;

AIR BRAKE CONTACTOR – 16A;CONTROL 3NO+1NC, COIL- 230V;

AIR BRAKE CONTACTOR – 22A; 3 POLE 2NO+2NC, COIL- 230V;

SURGE SUPPRESSOR; TYPE; 3X7402

ANALOG AMMETER; RATING: 0-200A, TYPE;0 – 10 V

ANALOG AMMETER; RATING: 0-50A; TYPE;0 –10V

DC RELAY; RATING: 2C/O, 24V DC;

DYNAMIC BRAKING RESISTOR; RATING: 5 OHMS 50KW;PUNCHED STEEL

DYNAMIC BRAKING RESISTOR; RATING: 11 OHMS 25KW; TYPE; PUNCHED STEEL

DYNAMIC BRAKING RESISTOR; RATING: 7 OHMS 25KW; TYPE; PUNCHED STEEL

CT’S; RATING:200 AMPS; TYPE; APR200B10

PANEL FILTER

ENCODER ; RATING: 1024 PTR INCREMENTAL;

ENCODER ; RATING: 4096 PTR ABSOLUTE;

LIMIT SWITCH (CABLE GUIDE FITTED WITH ROLLER AND PENDULUM )

UTF0B4 POWER BOARD FOR SP 5401, ITEM CODE-9200-1314

UTF0B6 POWER BOARD FOR SP 6401, ITEM CODE-9200-1514

UTF0B6 POWER BOARD FOR SP 6402, ITEM CODE-9200-1515

HEAT SINK FAN FOR SP 5401, ITEM CODE-3251-1025-00

UT57- PART OF UTFOBS FOR SP5401, ITEM CODE-9200-1221

UT48 CURRENT FEEDBACK PCB, ITEM CODE-9200-1702

CAPACITOR BANK FAN, ITEM CODE-3251-0524

UT67 PCB, ITEM CODE-9200-1236

UT98 PCB, ITEM CODE-9200-1324

CONTROL SUBASSEMBLY, ITEM CODE-9602-0069

IGBT MODULES FOR SP5401,

SM I/O PLUS CARD,

FUSE RATING: 350A, 690V TYPE - DIN

FUSE RATING: 315A, 690V TYPE - DIN

FUSE RATING: 200A, 690V; TYPE - DIN

TRIPLE POLE MCB FOR CONTROL - 32A;(BRAKE SUPPLY)

INDICATING LAMPS ; (RED : 02,YELLOW: 01,BLUE : 01,GREEN: 01 , AMBER: 01); TYPE; LED

EMERGENCY STOP PUSH BUTTON; TYPE; NC

PANEL LIGHT RATING: 11W/230V AC

HRC FUSES ; RATING : 600A, 415V;

HRC FUSE UNITS; RATING : 16A,

WATER TYPE DOUBLE SEALING METALLIC PLUG SOCKETS;600 V , 400 A, 50HZ..

HRC FUSE LINK WITH BASE;10 AMPS

ANTICIPATORY SPARES FOR ONE JESSOP 80 TON ELL CRANE AT N-19 JETTY AND THREE JESSOP 30 TON ELL CRANES AT N-22, N-24 & IDS BERTH MECHANICAL FORGED PLAIN BOGIES WHEEL MAT: CAST STEEL, CS-65 (IS-2644) APPROX WEIGHT: 600 KGS.

FORGED DRIVE BLANK BOGIES WHEEL MAT: CAST STEEL: CS-65(IS-2644) APPROX WEIGHT: 550 KGS.

BOGIE WHEEL BUSHES MAT: PHOSPHORUS BRONZE BS 1400-1961 SIZE: OD: 190.0MM, ID: 165.0MM, LENGTH: 230.7MM

BOGIE WHEEL ADJUSTMENT LINERS SIZE; OD:300.0MM, ID: 168.0MM, THICK:20/25MM

BOGIE WHEEL DRIVE GEARS NO. OF TEETH:64, PITCH:2.5” DP, PCD:25.6”, FACE:4.25” MAT:EN-9

SELF LOCKING FIT BOLTS AND NUTS SIZE:M27X250MM, MAT:EN-8

BOGIE WHEEL PIN/SHAFTS WITH BOTH ENDS SELF LOCKING PLATES (GREASE GROVE TYPE), DIA:167.0MM, LENGTH:

INTERMEDIATE GEAR WHEEL NO. OF TEETH: 91, PITCH:2.5”, DP, PCD:36.4”, FACE:4.25”. BORE: 12”, MAT:EN-9

INTERMEDIATE LOCK BUSH MAT: SS, AISI-316, OUTER DIA:300.0MM

INTERMEDIATE GEAR BRONZE BUSH MAT: PHOSPHOROUS BRONZE, BS:1400-1961 SIZE: OD: 300.0MM, ID: 280.0MM, HEIGHT: 150.0MM.

MIDDLE/IDLE GEAR AND INNER BUSH NO. OF TEETH: 65, PITCH: 2.5” DP, PCD: 26”, FACE: 4.25”. BORE:4.25”, MAT:EN-15

INNER BUSH MAT: PHOSPHOROUS BRONZE, BS:1400-1961 SIZE: OD:127.0MM, ID:107.5MM, HEIGHT:138.0MM

POWER TRANSMIT END GEAR/PINION NO. OF TEETH:18, PITCH:2.5” DP,PCD:7.2”, FACE:4.3”, BORE:3.25”, MAT:EN-17

INTERMEDIATE GEAR PIN (GREASE GROVE TYPE) MAT: SS, SIZE:

MIDDLE GEAR PIN (GREASE GROVE TYPE) MAT: SS, SIZE:

LT REDUCTION GEAR BOXES 20:IR, TYPE:U1000,

WORM WHEELS

WORM SHAFT

WORM WHEEL SHAFT

WORM SHAFT BEARINGS:ALS:28

WORM WHEEL SHAFT BEARINGS:AMS-22

OIL SEALS 250-354-47,

GEAR BOX TOP AND BOTTOM COVER ONLY

BRAKE DRUM, SIZE:12.0”

BIBBY COUPLING SPRING-WK 158

BIBBY COUPLING COVERS

COUPLING INSERTING FLANGES

INSERTING FLANGES OF BIBBY COUPLING

THRUSTER BRAKE LEVER, SPRINGS AND LOCK NUT ASSEMBLY

LT ANCHOR MECHANISM

(I) ANCHOR LOCK SCREWS

(II)LOCK PADS

(U)PLUMBER BLOCK ASSEMBLY WITH BEARING AND SELF LOCKING FASTENERS

BEARING NO. 22214(C), OIL SEAL:350-450-250

(V)WOODEN STOPPERS (HARD RUBBER/COUNTRY WOOD)

MAIN BOGIE ASSEMBLY PINS, MAT: SS

BALANCING SUSPENSIONS MAIN PIN, MAR: SS

SLEW MECHANISM SYSTEM: SLEW REDUCTION GEAR BOX RATIO 35:1,

SLEW BRAKE DRUM, SIZE:12” DIA, 10ZP

SLEW FLUID COUPLING, TYPE: FCU, 10” DIAX4½ WIDE BREAK DRUM

THRUSTER BRAKE ASSEMBLY, TYPE:10ZP-KT402

SLEW FOOT HYDRAULIC BRAKE SYSTEM ½ LB CAPACITY

LOW PRESSURE COMPENSATIVE UNITS

SLEW PINION GEAR NO. OF TEETH:20, 20 MODULE,

PCD:400MM, FACE:7.0”, MAT:EN-9

SLEW DRIVE GEAR, NO. OF TEETH:84, DP:2.0”.

PCD:3.6”, FACE:5”, BORE:6”, CRS:2.2”, MAT:EN-9

HEAT RESISTANCE OIL SEALS

SLEW INPUT AND OUTPUT BEARINGS

SKF-NJ316

SLEW HYDRAULIC BRAKE FLEXIBLE HOSE PIPES

HEAVY DUTY MASTER CYLINDERS, CCP: ½ LB

FUEL LINE, COPPER FLEXIBLE PIPE 8MM DIA

BRASS FITTINGS AND ADAPTORS (NIPPLES, UNIONS AND ¾ WAY JUNCTION)

MAIN HOIST MECHANISM SYSTEM:- HOIST INPUT AND OUT PUT BEARINGS:-

BEARING 22218C

BEARING 22219C

BEARING 22226C

BEARING 2221C

BEARING 22220C

BEARING 22228C

STEEL WIRE ROPE LENGTH = 437 MTRS, WIRE ROPE DIA = 40 MM. CONSTRUCTION = 34/7, TYPE OF ROTATION = NON-ROATION, WIRE FINISHING/MATERIAL GRADE = UNGALVANISE, TYPE OF CORE = IWRC, MASS/UNIT LENGTH (KG/MTR) = 6.428, TENSILE STRENGTH = 1770 N/SQ.MM, APPLIED STRENGTH = IS 2266/2002, TYPE OF LUBRICATION = PETROL BASED, ATTACHMENT OF ENDS = ONE EYE TYPE THIMBLE AND ONE FREE END.

STEEL WIRE ROPE LENGTH = 127 MTRS, WIRE ROPE DIA = 35 MM. CONSTRUCTION = 17/7, TYPE OF ROTATION = NON-ROATION, WIRE FINISHING/MATERIAL GRADE = UNGALVANISE, TYPE OF CORE = FIBER CORE, MINIMUM BREAKING FORCE = 67.5TON, TENSILE STRENGTH = 180 KG/SQ.MM, APPLIED STANDARD = IS 2266/2002, TYPE OF LUBRICATION = PETROL BASED, ATTACHMENT OF ENDS = END FREE.

(B) STEEL WIRE ROPE LENGTH = 332 MTRS, WIRE ROPE DIA = 36 MM. CONSTRUCTION = 34/7, TYPE OF ROTATION = NON-ROATION, WIRE FINISHING/MATERIAL GRADE = UNGALVANISE, TYPE OF CORE = IWRC, LAY OF ROPE = 6/1, MASS/UNIT LENGTH(KG/MTR) = 5.05, MINIMUM BREAKING FORCE = 730 KN, TENSILE STRENGTH = 1770 N/SQ.MM, APPLIED STRENGTH = IS 22066/2002, TYPE OF LUBRICATION = PETROL BASED, ATTACHMENT OF ENDS = END FREE.

HOIST HOOK BRONZE BUSHES

GACO SPLIT OIL SEALS MIS 38

BIBBY COUPLING NO.266 TYPE WXC

HOIST BRAKE DRUM, SIZE:24”X12”

STRONG CLUTCH COUPLING MBA 400

THRUSTER BRAKE ADJUSTMENT LEVER SPRINGS AND LOCK NUT

WIRE ROPE PULLEYS

WIRE ROPE SLIDING MECHANISM WITH BELLOWS

LUFF MECHANISM SYSTEM: LUFF INPUT AND OUTPUT BEARINGS:-

(I)NO. NJ 311

(II)NO. NJ 312

(III)TIMKEN E435102-435165 – 01 SET

BRAKE DRUM, SIZE:15”X6”

BIBBY COUPLING, TYPEWX 212, SKNO. 34559

THRUSTER BRAKE ADJUSTMENT LEVER SPRING AND LOCK NUT

LUFF SCREW END LOCK NUT

LUFF GEAR BOX,

LUFF GEAR BOX BEARING SKF 22216C

LUFF GEAR BOX BEARING SKF 29272

LUFF GEAR BOX BEARING SKF 6068

ELECTRICAL:- OVERLOAD RELAYS 90-100-125-150

HOIST FLC SET AT 178.5 AMPS.

LUFF FLC SET AT 79 AMPS.

SLEW FLC SET AT 30.9 AMPS.

LT FLC SET AT 42 AMPS.

CREEP FLC SET AT 22 AMPS.

BCH TIMERS NO. RTPN 600V, MAX COIL VOLTAGE 220V, 50HZ

AIR Brake Contactors 3TF-56 IE C947 13 3947 VDE 0660AC, 400 AMPS

3TA-28/3TYI 283-OM 220V/264, 50HZ/60HZ

3TA-24/3TYI 243-OM 220V/264, 50HZ/60HZ

3TA-30/3TYI 303-00 1416 WDG. 0.42

AUXILIARY CONTACTORS 3TA 22.67

LONG TRAVEL MOTION LIMIT SWITH

MAIN HOIST MOTION LIMIT SWITH

LUFF MOTION LIMIT SWITH

COMPLETE PLAIN AND DRIVE BOGIES WORK FOR REPLACEMENT OF IDLE, INTERMEDIATE AND DRIVE GEAR REPLACEMENT.

SLEW FLUID COUPLINGS

SLEW FOOT HYDRAULIC BRAKE SYSTEMS

SLEW PINION MECHANISM

HOIST GEAR BOX

HOIST MOTOR: 125HP

LUFF MOTOR: 90HP

SLEW MOTOR: 30HP

LT MOTORS: 20HP

PONY MOTOR (CREEP): 15HP

(D)TRANSFORMER (I) 2.5 KVA

(II) 4.5 KVA

(III) 450VA

(IV) 14KVA 50W

MASTER CONTROL JOYSTERS

LT LIMIT SWITCHES

HOIST LIMIT SWITCHES

LUFF LIMIT SWITCHES

AUX HOIST BEARING SKF 22216C

MAIN HOIST MOTOR: HP:130, NO.OF.POLES:8, FRAME SIZE: 315M (460X500), STATOR VOLTAGE: 415V, RPM: 735.

MAIN HOIST PUNY MOTOR: HP:15, FRAME SIZE: GL-50-160-4(520X490), STATOR VOLTAGE: 415V, RPM: 68.

AUX HOIST MOTOR: HP:60, NO.OF.POLES:8, FRAME SIZE: 250M (350X410), STATOR VOLTAGE: 415V, RPM: 725.

AUX HOIST PUNY MOTOR: HP:7.5, FRAME SIZE: GL-50-132-4(520X490), STATOR VOLTAGE: 415V, RPM: 68.

SLEW MOTOR: HP:40, NO.OF.POLES:8, FRAME SIZE: 250M (350X410), STATOR VOLTAGE: 415V, RPM: 730.

LUFF MOTOR: HP:90, NO.OF.POLES:8, FRAME SIZE: 280LM (420X460), STATOR VOLTAGE: 415V, RPM: 730.

LONG TRAVEL MOTOR: HP: 17.5, NO.OF.POLES:8, FRAME SIZE: 200L (310X320), STATOR VOLTAGE: 415V, RPM: 725.

PULLEY, PART NO. P-7086,

LOAD CELL, PART NO. LOAD PIN-7087,

ANGLE SENSOR, ART NO. ANGLE 7088

LOAD TRANSMITTER, PART NO. LOAD TR-7989,

RF RECEIVER, PART NO. RX-71090,

IN CABIN EQUIPMENT, PART NO. IN CABIN -7091,

SIREN, PART NO. SIREN-7092,

MASTER DISPLAY, PART NO. M DISPLAY-7093,

SLAVE DISPLAY, PART NO. SDISPLAY-7094,

CABLES, PART NO. CABLE-9095,

PCB CLEARING COMPOUND

RADIO REMOTE CONTROL SYSTEM MODEL: TWISTER 2X, FREQUENCY RANGE : PLL 433~434 MHZ, CHANNEL SPACING : 25KHZ, HAMMING DISTANCE : >6, FREQUENCY CONTROL: SYNTHESIZER (PLL), FREQUENCY DRIFT : <3PPM @ -25ºC ~ 75ºC, FREQUENCY DEVIATION : 1PPM @ 25ºC, SENSITIVITY : -125DBM, DECODING REFERENCE : FSK, ANTENNA IMPEDANCE : 50 OHMS, DATA DECODER REFERENCE : QUARTZ CRYSTALS, RESPONDING TIME : 100MS – 300MS, ENCLOSURE RATING : IP – 66 , SOURCE VOLTAGE : 100 – 240VAC@50/60HZ., POWER CONSUMPTION : 36VA, OPERATING TEMPERATURE : -25ºC ~ 75ºC, OUTPUT CONTACT RATING : 250V @ 10A TRANSMITTER RF MODULE

RECEIVER RF MODULE

ENCOADER BOARD

DECOADER BOARD

RELAY CARD

POWER SUPPLY CARD

DOUBLE AXIS JOYSTICK

ONE STEP PUSHBUTTON (SIDE PANEL)

TWO STAGE ROCKER SWITCH

EMERGENCY STOP BUTTON

TRANSMITTER CASING

TRANSMITTER PROTECTIVE GUARDRAIL

TRANSMITTER POWER KEY SET

BATTERY PACK (7.3 V, 600MA)

ANTENNA CABLE

CHARGER

RECEIVER ENCLOSURE

WAIST BELT

SHOULDER STRAP

INTERFACING CONTRACTOR

INTERFACING PANEL ENCLOSURE

RESISTANCE BOXES:- Resistance for 3 Phase Slip ring Induction Motor, Capacity: 125 HP FLA: 178.5. RV: 350 V, RA: 162.5 A, Pole: 8, (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure.)

Resistance for 3 Phase Slipring Induction Motor, Capacity: 25 HP FLA: 41.6. RV: 275 V, RA: 45, Pole: 8, (Resistance 5 minutes rated cast iron grid type in sheet steel ventilated enclosure.)

Resistance for 3 Phase Slipring Induction Motor Capacity : 20 HP , FLA : 30.9 A , RV : 300 V , RA : 33 A , Pole : 8 , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor , Capacity : 55 HP , FLA : 79 A , RV : 190 V , RA : 133 A , Pole : 8 , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor, Capacity : 130 HP FLA : 177 A , RV : 330 V , RA : 175 A , Pole : 8 , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 60 HP , FLA : 85 A , RV : 190 V , RA : 150 A , Pole : 8 , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 40 HP , FLA : 68 A , RV : 145 V , RA : 125 A , Pole : 8 , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor , Capacity : 90 HP , FLA : 125 A, RV : 235 V , RA : 179 A Pole : 8 , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 45 HP , FLA : A , RV : V , RA : A , Pole : , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 12.5 HP , FLA : A , RV : V , RA : A , Pole : , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 17.5 HP , FLA : A , RV : V , RA : A , Pole : , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 22.5 HP , FLA : A , RV : V , RA : A , Pole : (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

Resistance for 3 Phase Slipring Induction Motor ,Capacity : 30 HP , FLA : A , RV : V , RA : A , Pole : , (Resistance 10 minutes rated cast iron grid type in sheet steel ventilated enclosure. )

OIL SEALS OF GEAR BOXES OIL SEAL GACO 250-350-50

OIL SEAL GACO 350-450-50

OIL SEAL GACO 220-240-20

OIL SEAL GACO 243-305-19

OIL SEAL GACO 170-200-13

OIL SEAL GACO 95-115-13

OIL SEAL GACO 80-110-12

OIL SEAL GACO 105-130-13

OIL SEAL GACO 237-312-50

OIL SEAL GACO 115-140-13

OIL SEAL GACO 290-330-20

OIL SEAL GACO 65-95-10

OIL SEAL GACO 65-90-13

OIL SEAL GACO-SM-100.125.12

OIL SEAL GACO SPILT MIS.38

OIL SEAL GACO SPILT TYPE SPS.2400.2600.1

GACO OIL SEAL MIS.215

GACO OIL SEAL MIS.311

BRAKE SHOE LINER 10M THICK, 300 MM WIDTH

FUEL LINES/ GREASE LINE, COPPER FLEXIBLE 8MM DIA WITH BOXES FTTINGS LINE, UINONS, NIPPLES. PAROLES ETC.

GREASE NIPPLE ¼” bsp

WIRE ROPE SLIDING MECHANISM COPPER ROLLER WITH PIN

SWITCHES AND FUSES HD MIN SWITCH LBX111 400, 250/415V 3PH IS4047-1967,250A

HD MIN SWITCH LBX111 400, 3PH, 250/415V 3PH, IS4047-1967, 400A

ON/OFF SWITCH LBO/K 1387-21-2/5 25A, 500V, 50HZ FOR PROTECTION PANEL

PUSH BUTTON SWITCH BSA 10/LBO 500V 10A (RED & GREEN BUTTONS)

TPN HEAVY DUTY SWITCH FUSE UNIT + HRC FUSES 630A

HRC FUSE BASE UNIT WITH FUSE ELEMENTS 3NH7-320-400A, 500V LBO, 3NA, 800/LBO 500V, 80KA, 315A

HRC FUSE BASE UNIT WITH FUSE ELEMENTS 3N H3-02/LBO, INA/500V

HRC FUSE BASE UNIT WITH FUSE ELEMENTS 3N H3, 200V, 25A/500V 3NAI, 224/LBO 500V>80KA

BOTTLE (SCREW TYPE) FUSE BASE UNITS WITH ELEMENTS 500V, 25A

INDICATION LAMP WITH HOLDER, PIN TYPE:220V, 8W BSY 10.10B.15D

VOLTMETER 0-500V AC

AMMETER 0-100A, CTR 200/5A IS 1248-68, 50HZ

MASTER CONTROLS JOYSTICK TYPE DUAL MOTION

CALLING BELL/LT GAUGE BELL/LT WARNING BELL

LED FLOOD LIGHT FITTINGS ALONG WITH ACCESSORIES, CLAMPS AND FIXTURES, 230V, 50W

LED BULK HEAD WATER TIGHT FITTINGS, 230V, 9W

LED TUBE LIGHT FITTINGS 9W,230V

4/4 JUNCTION BOXES WITH ON/OFF ROTARY SWITCHES

CABLE TRAYS 300MM

PVC CONDUIT PIPES 50MM

ELEMAC CONNECTIONS: 25SQMM -

CRANE STOPPERS (HARD RUBBER/ WOODEN)

CRANE ANCHORS AS PER EXISTING SYSTEM

ELECTRO HYDRAULIC THRUSTERS

HOIST: TK 1503

LUFF : TK 752

SLEW & LT: TK 402

90 SQMM, 4 CORE BUTY RUBBER INSULATED COPPER FLEXIBLE TRAILING ERP/TRS CABLE WITH HEAVY DUTY SHEATH, 1100 V, OIL AND FLAME RESISTAN

PAINTING PAINTING OF ELL CRANE SUPER STRUCTURE (INTERIOR AS WELL AS EXTERIOR PART OF CRANE) AFTER CHIPPING OF SURFACE TO BARE METAL AND THEREAFTER PAINTING THE SURFACE AS PER PAINT SCHEME PROMULGATED BY THE DEPARTMENT.

COMPLETE PAINTING OF ENTIRE ELL CRANE SUPER STRUCTURE AFTER CHIPPING OF SURFACE TO BARE METAL AND THEREAFTER PAINTING THE CRANES AS PER PAINT SCHEME PROMULGATED BY THE DEPARTMENT.

LEAD ENGINEERS

sowmya enterprises

India Maritime Services

McNally Bharat Engineering Company Limited

FIELD TECH ENGINEERS AND CONTRACTORS