Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-AOC | ₹11.2 L | L1 | Accepted-AOC Lowest and Reasonable |
| 2 | L2₹13.5 L+₹2.2 L (20.0%)Rejected-Finance | ₹13.5 L+₹2.2 L (20.0%) | L2 | Rejected-Finance Not Lowest |
| 3 | L3₹14.0 L+₹2.7 L (24.3%)Rejected-Finance | ₹14.0 L+₹2.7 L (24.3%) | L3 | Rejected-Finance Not Lowest |
| 4 | L4₹14.5 L+₹3.2 L (28.6%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | ₹14.5 L+₹3.2 L (28.6%) | L4 | Rejected-Finance Not Lowest |
| 5 | L5₹18.3 L+₹7.0 L (62.4%)Rejected-Finance | ₹18.3 L+₹7.0 L (62.4%) | L5 | Rejected-Finance Not Lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
31 Dec 2020, 6:00 pmClosed
GE Army Bhuj
GE Army Bhuj, Madhapar Road, Bhuj-Kutch, Gujarat- 370 001
CERTAIN REPAIR/ REPLACEMENT OF LT PANEL BOARD/LT FEEDER PILLAR BOX, MCCB, LIGHTENING PROTECTION AND EARTHING IN MD ACCN AND UNIT AREA AT MIL STN BHUJ
2020_MES_402568_1
8740/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Bhuj
As Per Tender
7 documents required · 7 mandatory
₹500
GE Army Bhuj
₹30,000
Yes
19 Jan 2021
10 Dec 2020
2 Jan 2021
10 Dec 2020
31 Dec 2020
17 Dec 2020
Amount
Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft loose soil complete as specified and directed.
Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cm in any type of soil complete as specified and directed.
Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils complete as specified and directed.
M & L for sand filling in trenches for cushioning of LT cables punning after filling complete as specified and as directed. Note: Punned thickness shall only be measured and paid
Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables complete as specified and directed.
Disconnecting, taking out, removing old existing unserviceable underground and Supplying ,Laying, jointing and testing new XLPE insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed of size 2 core 10 sqmm
All as per item No 6 here in above but of size 3.5 core 50 Sqmm
All as per item No 6 here in above but of size 3.5 core 70 Sqmm
All as per item No 6 here in above but of size 3.5 core 95 Sqmm
All as per item No 6 here in above but of size 3.5 core 150 Sqmm
All as per item No 6 here in above but of size 3.5 core 240 Sqmm
Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flat twin core cable of size 6 Sqmm.
Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flat twin core cable of size 10 Sqmm.
Dismantling of old deteriorated ACSR Conductor , of any size , any type and supply and fix aluminium conductor , steel reinforced (ACSR) , of any size, any type , as per existing one and stringing properly on the insulators and binding with aluminium wire , connectors , jumpers etc complete., Note :- Measurement and payment shall be made by measuring horizontal distance between centres of two adjacent poles and adding 3 % for sag , jointings, jumpers etc.
Supplying, stringing and fixing of continuous GI earth wire of size 4 mm / 3.15mm dia on LT poles as in cradle guards / earth wires etc including binding complete all as specified and directed.
Supply and fix the following item and disconnecting the old unserviceable one, including necessary lugs of any size and capacity wherever reqd :- MCCB Thermal Magnetic release 4 pole 63 Amps 25 KA. Make : Confirming to Cat part No N2063S4P of Indo Asian or equivalent in list of makes given in PS
All as per item No 20 here in before but MCCB Thermal Magnetic release 4 pole 100 Amps 25 KA. Make : Confirming to Cat part No N2100S4P of Indo Asian or equivalent in list of makes given in PS
All as per item No 20 here in before but MCCB Thermal Magnetic release 4 pole 160 Amps 36 KA. Make : Confirming to Cat part No N3160S4P of Indo Asian or equivalent in list of makes given in PS
All as per item No 20 here in before but MCCB Thermal Magnetic release 4 pole 200 Amps 36 KA. Make : Confirming to Cat part No N3160S4P of Indo Asian or equivalent in list of makes given in PS
All as per item No 20 here in before but MCCB Thermal Magnetic release 4 pole 250 Amps 36 KA. Make : Confirming to Cat part No N3250S4P of Indo Asian or equivalent in list of makes given in PS
All as per item No 20 here in before but MCCB Thermal Magnetic release 4 pole 400 Amps 36 KA. Make : Confirming to Cat part No N4400M4P of Indo Asian or equivalent in list of makes given in PS
Trimming / cutting of the tree branches / bushes which falls within a clear distance of 3 meter from all sides from the LT over head conductor & within line of conductors, and shifting waste to nearby waste depot & cleaning area complete.
S & F GI pipe, light grade, of size 50 mm dia including necessary fittings laid in trenches/fixed on wall/pole, complete all as speicifed and directed for cable protection .
S & F GI pipe, light grade, of size 40 mm dia including necessary fittings laid in trenches/fixed on wall/pole, complete all as speicifed and directed for cable protection .
M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip 25x4 mm, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to LT Panel Board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe light grade for earth strip protection for suitable length and GI pipe 15 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: (i) Earth strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule. (ii) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe
Testing of lightning conductor earthing with the help of earth tester in presence of users rep presventative and recording the earth results in test register of each sub depot and MES register duly signed by OC of sub depot jointly signed by MES and users rep. complete as specified and directed.
Supply & fixing of air termination single pointed aluminum rod of 12 mm dia and 300 mm long connecting to conductors complete as specified and directed.
Supply & fixing of GI strip 32 mm x 6 mm size fixed to wall on batten or recess or chases or drawn in conduit/pipe or fix to poles or with saddles with wooden supported and fixing screw etc along walls complete as specified and directed.
Supply & fixing of Copper strip 20 x 3.15 mm with saddles ON wooden supports and fixing with screw etc for roof and down conductor along on walls all complete as specified and directed.
Supply & fixing of aluminum strip 25 mm x 3.15 mm with saddles on wooden supports and fixing screw etc for roof and down conductors along with walls complete as specified and directed.
Labour only for checking the serviceability of different spares / components / parts of security light fitting/street light (HPSV, HPMV, Metal Halide fittings etc, any wattage/capacity) of any description and in position or by taking down the fitting, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fitting and making the light fitting serviceable, connecting to electric supply and its testing on installation complete all as specified and directed by Engineer-in-Charge. NOTES : Contractor's quoted rates are deemed to be included the following : - (a) Removal of unserviceable / broken parts of fitting, fixing of new parts in replacement to make the fitting serviceable. New parts shall be measured and paid for separately as "supply only" against respective item of Sch ‘A’. (b) Necessary T&P i.e. ladder, tools etc required for checking, making the light fitting in serviceable conditions including necessary screws, insulating tapes, internal wiring, gasket etc fixing in position and testing, of any description on poles / on walls / on pillars etc i.e. in any position. (c) Contractor shall be paid only one time the labour charges quoted above in Schedule `A' items for a particular fitting repaired irrespective of the number of times labour and resources arranged by him to check the serviceability of the fittings and replacement of unserviceable / defective parts in order to maintain the fittings in serviceable/working condition.
Supply only the following parts of street light/security light fitting of any description and any position. Parts/spares shall be any of the following make to meet out the existing repair requirement of fitting (a) High freuency electronic ballast 1X 28 T5 watt with current harmonic below 10% and with improved power factor close to 0.9 suitable security light fitting T5 type. Make-Confirming to cat part No BJHF 128 LHD of Bajaj or equivalent in list of makes given in PS
All as per item No 36 here in before but T5 lamp 14watt sleek size T-5 tubes with advanced triphosper 230 Volt suitable for any type T5 fitting Make -Confirming to cat part No .nxt T-5 lamp 14W/86-84 of Bajaj or equivalent in list of makes given in PS
as per item No 36 here in before but Electronic Driver suitable for fixing in 30/45 Watt LED Light Fitting complete all as specified and as directed.
Supply and fix in repairs Weather Proof PVC Junction Box made out of not less than 2 mm thick of size 250x200x100 mm (approx) complete with hinged door locking arrangement and consisting of 01 No panel mounted connector 4 pole 32 A - 01 No MCB SP 06 Amps 10 KA - 01 No, confirming to IP 65 complete including fixing on street light pole with MS Clamps, bolts, nuts and washers all as specified and directed by Engr-in-Charge. Make - SINTEX, CAT PART No. 2817 or equivalent in list of makes given in PS Note : The rate quoed inculdes cost of MS Clamps, bolts, nuts and washers
zotabrothers
Jyoti Refrigeration
M/s Bombay Novelty Stores
Tech Serve Solutions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .