REPAIRS AND MAINTANANCE OF EXISTING ROAD AND ROAD FURNITURE ITEMS ETC IN CERTAIN LOCATION UNDER AGE B/R-I AT MIL STN BHUJ

Amount

Scarifying or picking gravelled, macadam or bituminous maccadam surfaces exceeding area not exc. 50 mm deep area not excceding 400 Sqm all as specified and directed.

Screening road metal, chippings etc on the site or the work, when specially ordered, including removing screened materials cear of screen and stacking in separtae heaps for measuring ( Materials from both sides of creen measured)

Material and labour for bituminous, macadam laid/rolled and compacted to by using 8 to 10 tonne power road roller to required camber and gradient required gradient and camber(Consolidated thickness 75mm or less) using Hot mix plant & Mechanical paver with @4% (paving bitumen (VG-30) grade) binder content by weight of total mix , rolled and compacted by using 8 to 10 tonne power road roller to required camber and gradient complete all as specified and directed . Note: Soft stones such as lime stones, sandstones, slatestone etc will not be allowed to be incorporated in the work.

dito s item No 3 but except stone aggreagtes (usable aggregates obtained from Itme No 1 to be used) all as specified and directed.

M & L Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming /tack coat with paving bituminous primer VG-10 grade at 5 kg per 10 Sqm complete all as specified and directed by Engr-in-charge...

M & L Preparing existing B M surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming /tack coat with paving bituminous primer VG-10 grade at 10 kg per 10 Sqm complete all as specified and directed by Engr-in-charge...

Material and labour for bituminous premix semi dense asphaltic concrete , 30 mm consolidated/compacted thickness using Hot Mix plant and machenical paver with 5.5% (paving bitumen VG-30 grade) binder content by weight of total mix, rolled and compacted using 8 to 10 tone power road roller to require camber and gradient compl,ete all as specified and as directed by Engr-in-charge.

M&L for repairs to pot holes any depth not exc 1 sqm each including sweeping free from dust and mud or water ,scoring sunken surfaces in roads etc cutting around edges to at least 25 mm in depth making good by applying tack coat with paving bituminous primer at 5 Kg / 10 sqm putting semidense asphaltaic concrete using 5.5% binder content by weight of total mix, well rammed and sealed with binder 9.8kg/10 sqm, blinded with 0.09 cum stone chippings 6.3mm size and again well rammed (incl supply of premixed macadam , binder and chippings) depth of pot holes exceeding 30mm complete all as specified and directed by Engr-in-charge..

M&L for preparing bituminous surfaces of road and making 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n.exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repair Solar Delinators of 1000x47mm made of polycarbonate and toughened aluminium body height 145mm, diameter 80mm comprises of 4 super LEDs which give 360 degree viewing, solar panel - 2.5V, 120mm (approx) 1.25V rechargeable battery-1No and mounted on MS Pipe of 50mm duly powder coated , anti theft steel net of size 700mmx50mmx100mm all as specified and directed by Engr in Charge (Note:- Excavation for bed block of size 150x150x200mm filling with concrete 1:3:6 and clearing of the area shall be included in the rate quoted)

S&F in repairs metal tubular delenator made out of 45mm dia MS pipe of 600mm total height duly powerded coated and 100 mm dia high quality and durable glass reflector made of top quality and durable glass refelactor made of top quality weather resistance plastic material (thermo plastic polyster clastomer) 3 bands of green/red/yellow reflactor of size 25mm wide strips with metal jalli for reflactor protection embeded in PCC (1:2:4) 150mmX150mmX300mm size.

S&F in repairs Raised pavement marker (Cat Eye Road Stud) complyuing ASTM D-4380 type H specifications, made of high strength engineering plastic body having at least 13635 kgs load bearing capacity in accordance with ASTM D 4280. The reflective riased pavement markers shall also confrem to the MORTH circular No RW/NH. 33023/10/97-DO.III & size or marker 9 cms x 10 cms x 1.6 cm having shape so that no water penetration or dust accumulation takes place on reflective surface, fitted with electronically weded tough polycarbonate micro prismatic reflective panels having not less than 13 sqcms surface of each side having long distance visibility at night and in wet weather condition. The slope or retro-reflectory surface shall be 35 + 5 degree to base. Each reflector shall have a cill not less than value specified in table 1 of MORTH circular dated 11.06.97 respectively. The body of the marker having finger grip for easy and accurate placement and application with adhesive on Asphalt or Cement road all as specified and directed.

S&F solar cat eye Aluminium alloy shell (!00% water proofing design according to 65) of size 125mmx125mmx25mm (shank 60mm) of high efficiency Mono rystafine solar panel 2.4V/0.3 Watt one NI-ed rechargable Battery (1.2V/1600MA) consisting of six super bright LED with 10,000 to 18,000 mcd completed ad per manufatures instruction including taking out old cat eyes and removal from site etc all as specified and as directed

M&L for 75mm thick spread thickness moorum red bajri filling as in berm including rolling etc as directed.

M/s Bombay Novelty Stores

Nirmal Construction

M/S LAXMAN CONSTRUCTION COMPANY