COMPLEATION OF INCOMPLIET WORKS OF REPAIRS AND RE PAINTING/POLISHING OF STEEL AND WOODEN FURNITURE AND REPLACEMENT OF CUSHION COVER OF MIL STN BHUJ AND GANDHIDHAM UNDER GE(A) BHUJ

Amount

Preparation of existing old steel surfaces of furniture itemild steel of any description and in any postion, filling cavities with necessary putty/filler to achive even and smooth surface and applying one coat of synthetc enamel paint on following itemild steel to achive even and smooth golsy finish complete all specified and directed. NOTE : 1. Painting and polishing shall be done all around on all the exposed surfaces including internal accessories like shelves, draws, staioners, partition steel surfaces with spray painting all as approved by the Engineer-in-Charge. 2. Rate quoted by the contractor should be incusive of removing dents/correcting profiles of deshpaed itemild steel/parts to the normal postion. 3. Surface and site shall be left neat and clean. 4. Work shall be exeucted in Bldgs in users possession within perimeters of Army Area Bhuj or at BSO Yard as directed by Engineer-in-Charge.

All as per item No 01 but Book Case steel - (FD-1028)

All as per item No 01 but Almirah steel Med 1/2 H,1/2 Sh - (FD-1034, FD-104(M)& FD-114(M)

All as per item No 01 but Almirah steel Med - (FD-1032, FD-65 & FD-243)

All as per item No 01 but Almirah Large steel 1/2 H,1/2 Sh- (FD-1033, FD/E6/MAP/18)

All as per item No 01 but Almirah Large with sh steel - (FD-1031, FD-114 & FD-67)

All as per item No 01 but Rack adjustable 6 tier steel FD-1038

All as per item No 01 but Side rack steel with tray FD-97M/1023

All as per item No 01 but Bed Side Locker Steel Hospital (FD-157(M)

All as per item No 01 but Locker Steel (FD-1027,94(M)

REPAIR TO TABLE BED SIDE MAP (FD/E6/MAP/15(R))

Removing of existing broken damaged top of Table bed side of size 450mm x 450mmx18mm thick & supply and fixing of new top of prelaminated partical board edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge.

Removing old unserviceable MS Square pipe S&F new MS Square pipe 18mm x18mm x 18 guage using gas welding and standard workmanship complete all as directed. All as shown on drgs.

Removing old unserviceable Back side of table bed side frame S&F new back side size 582mm x 450mm x 18mm thick prelaminated particale board exterior gde. All as shown on drgs.

Removing old unserviceable Rear side of table bed side frame S&F new rear side size 500mm x 450mm x 18mm thick prelaminated particale board exterior gde. All as shown on drgs.

Removing old unserviceable shutter of table bed side frame S&F new shutter size 350mm x 450mm x 18mm thick prelaminated particale board exterior gde. All as shown on drgs.

Removing old unserviceable drawers S&F new Drawers of table bed side front size 450mm x 100mm x 18mm thick and side frame size 355mm x 100mm x 18mm thick prelaminated particale board exterior gde and 6mm thick commercial ply shall be fixed in bottom. All as shown on drgs.

Removing old unserviceable telescopic chanel S&F new tele scopic chanel 300mm long and 50mm wide fixed in drawers.

Removing old unserviceable C.P. Handle S&F new C.P. Handle 75mm long for drawers.

REPAIR TO CHAIR CB STEEL WITH ARMS-FD-75(M)

Remove old & unserviceable second class hard wood seat frame & S&F new second class hard wood seat frame with nut and bolt to conduit pipe for chair CB `A' steel arms, duly canned as per drg. Godrej pattern size 460mm x 450mm duly black polished all as per drg.

Remove old & unserviceable second class hard wood back frame and S&F new second class hard wood back frame with nut & bolts to conduit pipe for chair CB `A' steel arms, duly canned as per Godrej pattern size 460mm x 410mm duly black polished all as per drg.

S&F by welding of iron strip size 25mm x 3mm thick and 500mm long with two holes in each strip for fixing the screw to the seat frame of the chairs.

S&F by welding 04 Nos flat iron 50 x 3mm to a length of 4" cut & made to shape both sides of the chair leg each side 02 Nos.

Remove old & unserviceable second class hard wood arm and S&F of second class hard wood arms for chair CB `A' steel with arms duly black polished all as per drg.

REPAIR TO CHAIR CB STEEL WITHOUT ARMS- FD-75

Remove old & unserviceable second class hard wood seat frame and S&F new second class hard wood seat frame for chair CB without arms steel with nuts & bolts to conduit pipe, seat duly canned as per Godrej pattern of size 380mm x 420mm duly black polished, all as per drg.

Remove old & unserviceable second class hard wood back frame S&F new second class hard wood back frame for chair CB steel with out arms steel with nut & bolts to conduit pipe, back frame duly canned as per Godrej pattern of size 380mm x 420mm duly black polished all as per drg.

S&F by welding of iron strip size 25mm x 3mm thick and 420mm long with two holes for fixing the screw to the seat frame.

S & F by welding of 4 Nos flat iron 50x3mm to a length of 6" cut & made to shape both side of chair leg each side 02 Nos.

REPAIR TO ALMIRAH LARGE STEEL1/2 H,1/2 SH And with Sh AND ALMIRAH MEDIUM STEEL 1/2h,1/2 Sh And with/Sh FD-67(M) FD-1031 FD-1032 ,(FD-1034, FD-104(M)& FD-114(M)

Remove old unserviceable lock S&F new brass lock (6 lever) and chromium plated with duplicate key for large/medium almirah steel all as per drg.

Remove old & unserviceable 3 way locking device and S&F new three way locking devices MS seat cover for almirah steel large / medium as per drg.

Remove old & unserviceable handle and S&F new almirah handles 125 mm for large/ medium as per drg.

Remove old & unserviceable clips and S&F new MS shelving clips for almirah medium/large steel as per drg.

Remove old & unserviceable hinges and S&F new MS door hinges by welding 75mm size for almirah large steel / medium steel as per drg.

Remove old & unserviceable legs and S&F new legs for almirah steel as per drg.

Remove old & unserviceable shelf and S&F new shelf for large/ medium as per drg.

REPAIR TO TABLE OFFICE CLERK (STEEL)- FD-1004

Repairs to all existing drawer of steel table office clerk by taking out from table, removing and denting by cutting, welding etc as required and easning and resetting in the table for smooth functioning.

Taking down unserviceable locking arrangement from drawers & supply & fix new brass lever lock (6 lever) with duplicate key including locking arrangement.

Removing of existing broken damaged table top of the table office clerk steel of size 1200mm x 600mm x 18mm thick & supply and fixing of new table top of pre laminated partical board 18mm thick 4mm teak wood edging shall be provided all round of the top & fixed with 75mm long steel screw and apply one coat of black / olive green paint to the steel frame of table , all as shown on drg and as directed.

Removing of existing broken damaged standard PVC Handle and S&F new standard PVC Handle.

REPAIR TO TABLE OFFICE OFFICER (STEEL) : FD-1003

Repairs to all existing drawer of steel table office officer by taking out from table, removing and denting by cutting, welding etc as required and easning and resetting in the table for smooth functioning.

Taking down unserviceable locking arrangement from drawers & supply & fix new brass lever lock (6 lever) with duplicate key including locking arrangement.

Removing of existing broken damaged table top of the table office officer steel of size 1680mmx870mmx18mm thick & supply and fixing of new table top of prelaminated partical board 18mm thick 4mm teak wood edging shall be provided all round the top & fixed with 75mm long steel screw and applying one coat of black / olive green paint to the steel frame of table rest all as shown on drg and as directed.

Removing of existing broken damaged standard PVC Handle and S&F new standard PVC Handle.

REPAIR TO TABLE (STEEL) 900mmX900mmX760mm-FD-1009(M)

Remove old and unserviceable portion of MS square tubing of table 3x3 and fixing of new portion of MS square tube 25mm 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed.

Removing of existing broken damaged table top of the table of size 900mmx900mmx18mm thick and supply and fixing of new table top of pre laminated partical board 18 mm thick 4mm teak wood edging shall be provided all round of the top & fixed with 75mm long steel screw and apply once coat of black/olive green paint to the steel frame of Table rest all as shown on drg and as directed.

REPAIR TO TEAPOY VARANDAH-FD-255 FD-208

Remove old & unserviceable top of teapoy varandah & S&F new top made of Prelaminated particale board exterior grade as per drg.

Remove old & unserviceable portion of MS conduit tubing 19/20mm of teapoy varandah & S&F new pipe by gas welding of 19/20mm conduit tubing upto 6" as per drg.

S & F two nos of 350mm long 20mm dia MS conduit pipe and welding as stiffiners at both side and one No of 750mm long as centre stiffiner.

REPAIR TO TABLE (STEEL) 900mmX600mmX760mmFD-1008(M)

Remove old and unserviceable portion of MS square tubing of table 900x600x760mm and fixing of new portion of MS square tube 25mm 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed.

S & F in replancement the new top table 900x600x760 mm (FD-1008(M) with prelaminated partical board of size 900x600x18 mm with and teak wood edging 4mm thick alround fixed with long steel screw at appropriate distance and applying one coat of black paint/Olive green paint ti steel surfaces of the table complete all as show on drawing specifed and directed.

REPAIR TO CHAIR WRITING STEEL (MAP)

Removing of old and unserviceable cushion of seat and back both of chair writing steel and proving new 40 density cushion of 75 mm thick for seat and 50 mm thick for back both covered separately with leather rexine and fix suitable for seat and back complete as per drg all as directed by Engineer-in-Charge.

REPAIR TO LOCKER STEEL-FD-127 FD-1029

Removing old & unserviceable leg of locker and supplying and fixing new leg of locker (steel) as per drg.

Removing old & unserviceable handle and supplying and fixing new chromium plated handle 100mm long for locker (steel) as per drg.

Removing old & unserviceable hasp & staple and supplying and fixing new safety type hasp and stapple chromium plated 75mm long, 3mm thick as per drg.

Removing old & unserviceable hanging rod and supplying and fixing new hanging rod of 20mm dia conduit pipe of 1.6mm thick with sockets all as per drg.

REPAIR TO CHAIR SCHOOL W/HARD BOARD (FD/E6/Map/05)

Removing old unserviceable conduit pipe S&F new Conduit pipe 25mm dia 18 guage using gas welding and standard workmanship complete all as directed.

Removing old unserviceable Hand Rest Board S&F new Hand Rest Board size 585mm x 300mm x 25mm thick T.W. free from dead knot.

Removing old unserviceable rubber shoe and S&F new rubber shoe

REPAIR TO TABLE DINING OR - FD-165(M)

Removing old and unserviceable portion of MS square tubing of table dining ORs & supply and fixing of new portion of MS 25mm square tube with 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed.

Removing of existing broken damaged table top of the table dining ORs & supply and fixing of new table top of partical board 18 mm thick of size 1.9 meter long and 0.685 meter wide duly covered with 0.79 mm thick alimimunim sheet with full threaded machine.

REPAIR TO CHAIR VARANDAH WITH CANE (FD-19)

Removing of existing unserviceable old cane from chair varandah and supply and weaving of the same with new plastic cane 4 mm wide, white colour half round of approved quality including applying two coats of white synthetic enameled paint of approved quality on old steel surfaces of chair before canning complete all as directed

Removal of old and unserviceable portion of mild steel conduit tubing of chair varandah and S & F new portion of 20mm dia mild steel tubing with gas welding and with standard workmanship at four tuck welds where required as per drg and apply two coat of white paint over a coat of red oxide primer on the welding portion to match with existing white paint colour of chair varandah complete all as directed.

Removing of existing unserviceable old Rubber shoe and S&F new rubber shoe.

POLISHED TO WOODEN FURNITURE

M & L for preparation of old polished wooden surfaces by scrapping and filling canties, if any, with filler/putty to achieve even and smooth surface , sand papered and applying coat(s) of french polish readymade of brand approved to the following furniture to acheieve uniform glossy finish to the entire satisfaction of Engineer-in-charge complete all as specified and directed .

Ditto but polishing Sofa set 4 seater -ditto-. Drawing No FD-258/ 281/373

Ditto but polishing Sofa set 5 seater -ditto-. Drawing No FD-258/ 281/373

Ditto but polishing Chair dinning Officers -ditto-. Drawing No FD/MAP-II/04

Ditto but polishing Chair Easy Cushioned -ditto-. Drawing No FD-358,32,299

Ditto but polishing Chair Visiting Cushioned -ditto-. Drawing No TP

Ditto but polishing Chair Writing wth Cushion -ditto-. Drawing No FD-360,FD/E6/MAP/12

Ditto but polishing Stool Dressing with Cushion -ditto-. Drawing No FD-251,FD/MAP/07 & FD/MAP/16

Ditto but polishing CHAIR DING LONG BACK with Cushion -ditto-. Drawing No TP

Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR DINING OFFRS, good quality as approved by GE, complete all as specified and directed. Drawing No FD-FD/MAP-II/04

Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR DINING LONG BACK CUSHIONED, good quality as approved by GE, complete all as specified and directed. Drawing No FD-FD/MAP-II/04

Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR EASY CUSHIONED, good quality as approved by GE, complete all as specified and directed. Drawing No FD-358,32,299

Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR VISITING WITH CUSHIONED, good quality as approved by GE, complete all as specified and directed. Drawing No TP

Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR WRITING WITH CUSHIONED, good quality as approved by GE, complete all as specified and directed. Drawing No TP

Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of Stool Dressing with Cushioned Seat, good quality as approved by GE, complete all as specified and directed. Drawing No FD-251,FD/MAP/07, FD/MAP/012

Removing of old faded cushion cover only of a seat or back of SOFA SET 5 SEATER and S&F new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit). Drawing No FD-281/373

Removing of old unserviceable Foam cushion and S & F new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop Drawing No FD-281/373

Removing of old faded cushion cover only of a seat or back of SOFA SET 4 SEATER and S&F new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit).

Removing of old unserviceable Foam cushion and S & F new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop. Drawing No. FD-281/373

Removing of old faded cushion cover only of a seat or back of SOFA SET 3 SEATER and S&F new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit).

Removing of old unserviceable Foam cushion and S & F new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop. Drawing No. FD-281/373

Removing of old faded cushion cover only of a seat or back of SOFA SET 2 SEATER and S&F new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit).

Removing of old unserviceable Foam cushion and S & F new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop. Drawing No. FD-281/373

Preparation of existing old steel surfaces of furniture itemild steel of any description and in any postion, filling cavities with necessary putty/filler to achive even and smooth surface and applying two coat of synthetc enamel paint on following itemild steel to achive even and smooth golsy finish complete all specified and directed. NOTE : 1. Painting and polishing shall be done all around on all the exposed surfaces including internal accessories like shelves, draws, staioners, partition steel surfaces with spray painting all as approved by the Engineer-in-Charge. 2. Rate quoted by the contractor should be incusive of removing dents/correcting profiles of deshpaed itemild steel/parts to the normal postion. 3. Surface and site shall be left neat and clean. 4. Work shall be exeucted in Bldgs in users possession within perimeters of Army Area Bhuj or at BSO Yard as directed by Engineer-in-Charge.

All as per item No 16 but Table Bed Side (FD/E6/Map/15 ( R )

All as per item No 16 but Chair CB steel with Arms (FD-75(M)

All as per item No 16 but Chair CB steel without Arms (FD-75)

All as per item No16 but Table office Clerk (steel) (FD-1004)

All as per item No 16 but Table office officer steel (FD-1003)

All as per item No 16 but Teapoy Verandah (FD-255 FD-208)

All as per item No 16 but Table (Steel) 900mmX900mmX760mm-FD-1009

All as per item No 16 but Table (Steel) 900mmX600mmX760mm-FD-1008

All as per item No 16 but Chair warting (steel) (FD-/E6/MAP/12)

All as per item No 16 but Trustle store room (steel) FD-1043

All as per item No 16 but Stool Steel 1'x1'x2' FD-81M

All as per item No 16 but Chair School W/Hard Board (FD/E6/Map/05)

Jyoti Refrigeration

Nirmal Construction