Providing Lift arrangements, Generator facilities and Providing AC Unit to Shopping Complex & Rooms and also providing Annual Maintenance Charges (AMC) for 3 years at Sri Valli Devasena Sametha Sri Subrahmanyeswara Swamy Temple, Mopidevi (V & M), Krishna District.

Supply of 1.5 TR 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A,COP not less than 4.5.INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor ondencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation. Makes: / Blue Star PAFU-DAFU series / Daikin FTKC5ONVM / Hitachi/Voltas all incidental, Operational and accidental charges and including overhead and Contractor Profit etc., for finished item of works

Supply, Installation, Testing, Commissiong of Electric Traction Goods Elevators Product, MAke:Johnson Name: SUKRANTI-MR-C, Number of Units:1, Lift Type Passenger Lift Rated Capacity Persons/ Kgs/ Class of Loading 8 Persons / 544 Kgs / P - Passengers Rated Speed m/s 1.25 Number of stops openings 4/4 Floor Designation: GROUND+3 UPPER FLOORS, Access Sides Inline/Thru Type: 1 (One), In Front Only, Floor Display Character (Entrance Position) O(F),1(F),2(F),3(F) 11 MACHINE AND CONTROLLER DETAILS: Machine Location / Type Machine Roomless - Gearless Drive System Micro Processor Based VVVF Control system Microprocessor Based Simplex Selective Collective Control With / Without Attendent Main Power Supply AC 3 Phase, 50 Cycles, 415 Volts ±10% Light Power Supply 220 Volts 50Hz LNE III SHAFT DETAILS Shaft Type RCCRB Reinforced Cement Concrete With Red Brick Shaft Width mm X Shaft Depth mm 1800 X 1600 Overhead mm4200 Pit Depth mm1600 Travel Height (in Meters) 12 Shaft Reduction Channel Not Required Shaft Reduction Channel Weight (in kgs) No Pit Ladder Yes IV CABIN DETAILS A) SIZES Car Width mm X Car Depth mm 1200 X 1200 Car Clear Height mm 2200 Car Door Type Center/Side No Of Door Panels 2 Panel Type of Door Drive Linear Door Drive System Car Door (W X H) mm 800 X 2000Design Of Lift Cabin Stainless Steel Lift Cabin Finish Hairline Finish Car Door Stainless Steel Car Door Finish Hairline Finish Ceiling Finish Ss Hairline' Finish Ceiling Type Sleek Small Circular-JLFC 03 Ceiling Light Led Lights-03Fan Regular (Circular) - Fan Flooring Type-PVC Handrail Type Ss Round Handrail JLHR01 Handrail Location Rear Side Car Door Sill V LANDING DOORS DETAILS A) SIZES Door Type Centre Opening Sliding Door Door Size (W x H) mm800 X 2000Door Sill Aluminum B) FINISHES Landing Door Finish 1-4-Stainless Steel - Hairline Finish Landing Door Frame / Finish 1-1 4-Stainless Steel - Hairline Finish Main Landing Floor:0 Other Landing Floors1,2,3Jamb Type Slim FrameV1 SIGNALIZATION / FIXTURES DETAILSA) CABIN OPERATING PANEL Car Operating Panel Type Car Operating Panel- LCP01Number of Car Operating Panel COP Faceplate Finish Stainless Steel Hairline Finish Button Model1s10- Bas128 (White Glow) Car Display White Digital Display (7 Segment) -Vertical Car Display Location Car Operating Panel Call Register Signal:yes B) LANDINGS INDICATORS Landing Operating Panel Type: Landing Operating Panel - JLPL (Jsm433) / JLLP23 LOP Location Landing Display On Wall LOP Mounting Type Surface/Wall Mountable LOP Faceplate Material Stainless Steel - Hairline Finish Landing Display1-4-W7SD-V Landing Display Location 1-4-LOP Call Register Signal Yes Stainless Steel Braille Button VII SAFETY DETAILS Over Speed Governor yes Door Protection Infra Red Door Screen Counterweight Screen Inbuilt Over Load indicator For Rooms and Shopping Complex

Supply Installation Testing And commissioning of 125 KVA at 0.8 power factor 415 V 50Hz 3 phase DG Set complete with 1500 RPM Diesel Engine of sultable BHP & AC Brushless SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator: it shall be self-regulated, self-excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection (over voltage, over speed & under voltage). Diesel Engine: It shall have residential silencer, up to 10 M exhaust piping, electronic/ Mechanical governor, Manual & electric Start, Batteries, Fuel tank & piping, control panel (16 G) with SPN(For 5 KVA)/TPN MCCB of required rating (25/36/50 KA) with PLC based Engine controller supplied by OEM, Ammeter, Voltmeter, Frequency Meter or Multi-function meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and Automatic Voltage Regulator. The diesel engine shall be capable of providing 10% overload for 1 Hr for every 11 Hrs of continuous running at full load. The DG set shall be supplied with initial filling of fuel, lube oil, coolant oil as per OEM specifications and C14 shall be tested at site. Acoustic Enclosure: Weatherproof, powder coated Acoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183. The doors are fabricated from 1.6 mm CRCA sheet packed with acoustic material, floor of MS chequered plate 5.0 mm thick, all doors/ opening are sealed with neoprene/ EPDN gaskets. The DG Set shall be maintained for two years after commissioning by the supplier including regular servicing, cost of consumables etc complete as specified by the OEM along with warranty for two years. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50°C.All controls for operation of DG set are from outside the enclosure with DG control panel having processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter. PF meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure, visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms, complete in all respect radiotor cooled and turbo charged all incidental, Operational and accidental charges and including overhead and Contractor Profit etc., for finished item of works

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply and Run of 40mm x 6mm G.I. Strip including cost of all accessories and labour charges etc., complete. (1.88Kgs/1Mtr) all incidental, Operational and accidental charges and including overhead and Contractor Profit etc., for finished item of works

Supply and Run of 25mm x 3mm copper strip (Cuurrent Carrying Capacity 270A) including cost of all accessories and labour charges etc., complete. (0.663Kgs/1Mtr) all incidental, Operational and accidental charges and including overhead and Contractor Profit etc., for finished item of works

Supply, transportation, fixing and commnissioning of fully automatic 4,00 KVA line voltage stabilizer including cost, conveyance of all mateials and all labour charges etc., complete Makes:U-guard/Real Guard/Unistab/ITL all incidental, Operational and accidental charges and including overhead and Contractor Profit etc., for finished item of works