REPAIRS TO ROOF, SUNKEN, JOINERY AND SANITARY FITTINGS AND OTHER MISC ITEMS IN TECHNICAL AREA AT AF STN BHUJ

Amount

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down of shutters of any description of size exc 2.0 Sqm each,complete all as specified and as directed by Engineer-in-Charge.

Re- fixing of shutters in same opening description exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

Re- fixing of shutters of in same opening any description of size exc 2.0 Sqm each, complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 125x60mm,1.25mm thick pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 105x60mm,1.25mm thick pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engineer-in-Charge.

Material & labour for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in bed blocks for fixing of hold fasts and the like including necessary formwork complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/ Gauge etc. Size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (any number of panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veveered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.

Supply & fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed wih aluminium wire staples complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or extraded sections and fixing bolts and sliding bolts of extraded sections or cost aluminium alloy complete all as specified and as directed by Engineer-in-Charge.

Supply & fix stainless steel 100mm size of hinges butt hinges, medium weight, complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 150 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and as directed by Engineer-in-Charge.

Supply & fix for 140mm floor door stopper of aluminium alloy body and tongue, anodised, fixed in floors complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repairs for 140mm floor door stopper of aluminium alloy body and tongue, anodised, fixed in floors complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new sufaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply & fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge

Supply & fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge

Material & labour for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section or equivalent make specified in Annexure 'I' of PS including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and as directed by Engineer-in-Charge.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately

Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and as directed by Engineer-in-Charge

Supply , fabricate & fix anodised (15 micron) aluminium sliding windows/ ventilators made out of Jindal/Hindalco Aluminium sections as in frames , sliding/ fixed shutters etc. With one or more rebates incl. Jointing cleats & locking arrangements complete all as specified & as per manufacturer's instruction. Note- Quoted rate shall deemed to be included for supply of aluminium sections, fabricate & fixing in position of window frames & shutters, locking arrangements complete all as specified and as directed by Engineer-in-Charge.

Supply only rubber beading for fixing of glass of item No 25 above complete all as specified and as directed by Engineer-in-Charge.

Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 15 mm thck on concrete surfaces in cement mortar 1:4 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 x 460 mm, bowl size 410 x 330 x 180 mm mm Make : Nirali (Model : elegance small from regular range, glossy) or size 915 mm x 460 mm bowl size 410 x 330 x 178 mm complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge

Material & labour for 10 mm thick rendering on vertical surfaces in cement mortar 1:4 as backing coat complete all as specified and as directed by Engineer-in-Charge.

Material & labour for 25mm thick cement concrete type BO 1:2:4 using 12.5mm graded aggregate in floors complete all as specified and as directed by Engineer-in-Charge

Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified and as directed by Engineer-in-Charge.

All as per Ser Item No 34.00 above but in vertical surfaces such as dado, skirtingand riser etc complete all as specified and as directed by Engineer-in-Charge. (Note :- Backing coat of tiles plaster measured and paid seperatelly)

Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed by Engineer-in-Charge. (Note :- Backing coat of tiles plaster measured and paid seperatelly)

Material & labour for Vitrified ceramic polished light shade tiles 10mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified and as directed by Engineer-in-Charge.

Demolition of stone slabs any description or any thickness laid dry or laid dry and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge

Material & labour for 20mm thick Granite (Z Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm thick screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed by Engineer-in-Charge. NOTE : Cost of Screed Bed shall deemed to be included in QUOTED UNIT RATE.

Material & labour for Granite (Z Black) tiles 12 to 15mm thick machine cut, in vertical surfaces such as riser, skirting, dado, etc. including rounding edges, nosing, pointing on nose, etc., over and including 12mm thick screed bed in cement morter 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed by Engineer-in-Charge. NOTE : Cost of Screed Bed shall deemed to be included in QUOTED UNIT RATE.

Taking up or down following size of steel tubing and connections complete all as specified and as directed by Engineer-in-Charge.

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

Supply & fix CPVCpipes ISI marked IS 157778 with all fitting for hot and cold water fixed with solvent cement complete to walls and ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge of the following sizes ( SDR 13.5)

20mm bore of pipe

25mm bore of pipe

32mm bore of pipe

Supply & fix in repairs fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge .

All as per Item no 51.00 above but concealed type complete all as specified and as directed by Engineer-in-Charge.

Supply & fix repair for shower rose for 15 mm dia cast chromium plated screwed down high pressure with long shunk screwed end for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge

Supply & fix in repairs vitreous china wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repairs Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-Charge

Supply & fix in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repairs Aluminium anodised tubular towel rail 20mm dia D Type 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

Supply & fix Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-Charge

Supply & fix cast iron 'P' or 'S' traps 100 mm bore of pipe complete all as specified and as directed by Engineer-in-Charge.

Supply & fix grating square 150mm size of PTMT (minimum weight 100 gms ) complete all as specified and as directed by Engineer-in-Charge

Supply & fix in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, bll valve, flaot and handle including brackets of 10 Ltr capacity complete all as specified and as directed by Engineer-in-Charge.

Supply & fix PVC 15mm dia PVC connections 450mm long complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair 32mm dia PVC waste pipe for WHB/Uinals complete all as specified and as directed by Engineer-in-Charge

Material & labour for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement .complete all as specified and as directed by Engineer-in-Charge

Material & labour for 75mm dia cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) complete all as specified and as directed by Engineer-in-Charge

Taking down Cement Plaster block masonry or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. of complete all as specified and as directed by Engineer-in-Charge

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on ceiling surfaces and applying two coats of white wash by finishing the surfaces even and smooth complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care Putty by finishing the surfaces even and smooth complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment on wall surfaces and applying two coats of distemperwith distemper oil emuision, white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and as directed by Engineer-in-Charge.

Dismantling of cast iron,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed by Engineer-in-Charge for the following bore of pipe:-

110mm dia of pipe

75mm dia of pipe

Supply & fix of PVC drain self it pipes, single sockets ISI marked IS 13592 type 'B' in any length, jointed with solvent cement fixed in walls complete all as specified and as directed by Engineer-in-Charge for the following bore of pipe:-

110mm dia of pipe

75mm dia of pipe

Supply & fix of PVC junction single 'Tee' ISI marked IS 14735 jointed with solvent cement fixed in walls and the complete all as specified and as directed by Engineer-in-Charge for the following dia of pipes:-

110mm dia of pipe

75mm dia of pipe

Supply & fix of PVC bend equal ISI marked IS 14735 jointed with solvent cement fixed in walls complete all as specified and as directed by Engineer-in-Charge for the following dia of pipes:-

110mm dia of pipe

75mm dia of pipe

Supply and fixing Rotational moulded polythelene water storage tank, three layered, ISI marked, cylindrical vertical with closed top including dismantling existing water tank and removingto store complete all as specified and as directed by Engineer-in-Charge of following capacity

1000 litres capacity

750 litres capacity

500 litres capacity

Material & labour for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles complete all as specified and as directed by Engineer-in-Charge.

Material & labour for 60 mm thick (M-25 mix) glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm copacted sand bed, size & pattern of tiles complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

Supply & fix PVC/PTMT shelf fixed to walls with screws including necessary drilling holes. complete all as specified and as directed by Engineer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 4.00 mm thick sheet figured glass pin headed type and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including fixing bolts and Plastic water closet seat ( black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device) complete all as specified and as directed by Engineer-in-Charge

Supply & fix in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVC flexible pipe etc complete all as specified and as directed by Engineer-in-Charge.

Supply & fix for Vitreous China urinals, bowl type flat back, size 465X355X265mm white (minimum), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; (Excluding flushing cistern and waste pipe ) complete all as specified and as directed by Engineer-in-Charge

Supply & fix CP Hand shower (Health Faucet) with 1M Flexible tube with 8mm dia wall hook with NRV (Back flow preventor) complete all as specified and as directed by Engineer-in-Charge

Taking down carefully un-serviceable/old rolling shutters of size exceeding 5 Sqm but n. exc 10 Sqm each, gear operative/pull or push type type for replacement of un-serviceable/defective parts, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling to make the system smooth/easy functional, repair to locking arrangements including supply and fix new nuts & bolts of existing size by removing old/rusted nut and bolts wherever required, necessary welding wereever required as directed, giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work carried out complete all as specified and as directed by the Engr-in-Charge.

All as per serial item 101.00 above but of size exc 10 Sqm n. exc 20 Sqm each complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 101.00 above but of size exc 20 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Supply only 530mm long helical wire spring ‘O’ gauge for electrical operated rolling shutter complete all as specified and as directed by Engineer-in-Charge.

Supply only in 450mm long helical wire spring complete all as specified and as directed by Engineer-in-Charge.

Supply only 300mm long helical wire spring complete all as specified and as directed by Engineer-in-Charge.

Supply only ball bearings of size 50mm (Inner Dia) complete all as specified and as directed by Engineer-in-Charge.

Supply only cast iron gear set for mechanically operated rolling shutters thickness of laths 1mm complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repairs 1.00mm thick M.S. sheet hood covers bent to shape to match with the existing bracket welded with angle iron 25 X 25 X 3 mm on both sides and painted with two coats of aluminium paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Repairs to collapsible gates removal, replacement of wom out minor spare parts such as rivets, roller wheels, straightening of vertical channels and cleaning of rust including greasing for smooth functioning including applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Repairing/ Taking down Aluminium window/doors of any description area exc 1.00Sqm n. Exc 2.00 Sqm repairing/ retightening screws, aluminium clips and securing top & bottom rails using MS 10mm bar having both sides threading incl bolting, fixing of new rubber padding, Aluminium snap bidding, glazing clips and re-fixing resuring in same opening completed all specified and as directed by Engineer-in-Charge

All as item No 111.00 above here in before but area n.exc 1.00 Sqm complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair glass door 12mm thick clear tinted toughned glass incl diamond polish complete with six holes and two patch cut out incl frosting of glass all as per directions of EIC through CNC machine incl ISI marked floor spring for each shutter incl top patch bottom patch 30cm long stainless steel handle and central stainless steel lock complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm after repair /replacement of damaged part of glass door i.e floor spring, pivots, mortice locking arrangements and 30cm long stainless steel handle and refixing the same opening. (Cost of Pivots, mortice locking arrangements and 300mm long stanless steel handle will be paid seprateley) complete all as specified and as directed by Engineer-in-Charge

Supply only in repair Mortise lock for 12mm thick Glass door complete all as specified and as directed by Engineer-in-Charge.

Supply only in repair 300m long stainless steel handle complete all as specified and as directed by Engineer-in-Charge.

Supply only in repair Pivot complete all as specified and as directed by Engineer-in-Charge

Supply only in repair Brass Mortice lock 100mm 4 lever for Aluminum door complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair double action door spring hydraulically regulated made of aluminum body min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel body complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair aluminum extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in-Charge.

Lifting up carefully mechanical means steel hangar/blast pen door leaf of size area n exc 40 Sqm each, inspecting the parts/memners of doors, incl repairs, welding as required, removing unserviceable members, unsericeble pully/base wheels/top rollers/nut bolts etc and fixing only new parts/members as mentioned herein before , fixing steel door back in same positon after proper servicing & greasing for smooth noise-less movement/operation of doors complete all as specified and as directed by Engineer-in-Charge.

Easing, adjusting, cleaning of rails, greasing of base wheels and top guide wheel of hangar/BP door leaf having area not less than 40 Sqm each and height not exc 10 metre incl minor repairs, welding adjusting base wheels and top rollers etc to make the sliding door leaf noise-less smooth operation complete all as specified and as directed by Engineer-in-Charge.

Welding in repairs exc 2.5 cm but n exc 5 cm in length, thickness of metal to be welded exc 6mm but n exc 9mm sheets/plates/any other steel members, incl cleaning and preparing the surfaces while welding and bevelling of edges as required complete all as specified and as directed by Engineer-in-Charge.

zotabrothers

Mepani Construction Company