SPECIAL REPAIR TO BUILDING NO P-309 AT AF STN BHUJ

Amount

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed by Engineer-in-Charge.

Dismantling expanded metal, any thickness or mesh, exc 4 kg fixed with steel or wood fillets, if any complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steelv work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge.

Demolation of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Material & labour for precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) 20mm graded and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Demolition reinforcement Concrete roofs, floors (other than ground floors) beams, stairscases, landing, chhajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Supply & fix GI Frame work for seam less ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and secrews at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel exphansion fasteners with and including ceiling section (n.exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre of size 605 x 605 mm grid including hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified in repairs complete all as specified and directed by Engineer-in-Charge.

Supply & fix Gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge.

Fixing only anodised aluminium door shutters and chowkat , including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair Glass door 12mm thick clear tinted toughned glass incl diamond polish complete with six holes and two patch cut out incl frosting of glass all as per direction of EIC through CNC machine incl ISI marked floor door spring for each shutter incl top patch bottom patch and 30 cm long stainless steel handle set and central stainless steel lock complete all as specified and directed by Engineer-in-Charge.

Material & labour for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately. Note : main section of aluminium shall be used 100mmx45MM with same thickness as mentioned in lieu of drg 65mm x 38mm above reffered due to less space available for fixing wire gauge shutter fixing grill.

Material & labour for aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 4.4 mm x 7mm complete all as specified and directed by Engineer-in-Charge

Supply & fix anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10mm thick rendering on vertical surface in cement motar 1:4 as backing coat complete all as specified and directed by Engineer-in-Charge.

Material & labour for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etccomplete all as specified and directed by Engineer-in-Charge.

Material & labour for non skid ceramic coloured tiles 7 to 8mm thick (sqaure/rectangular) area of each tiles exc. 0.06Sqm but n.exc. 0.11Sqm as per IS - 13755 in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for in repairs for 20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 15mm thick in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded complete all as specified and directed by Engineer-in-Charge.

Material & labour for dark shade double charged vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-Charge

Returning, filling including spreading levelling watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concrete in foundations, type D-2, 1:4:8 ( 40 mm graded) filling and mass concrete complete all as specified and directed by Engineer-in-Charge

Material & labour for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge

Material & labour for 100mm thik PCC 1:2:4, B1 ( 20 mm graded) as in floor complete all as specified and directed by Engineer-in-Charge.

Material & labour for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge.

Material & labour for TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed by Engineer-in-Charge.

Material & labour for M-30 reinforment cement concre Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.

Supply & fix fatory made "Rajshri" PVC Internal door frame manufractured BY Rajshri of the size 120mmx50mm(double door frame) with a wall thickness of 5mm PVC Celuka Sheet of density 600Kg/Cbm manufractured by an ISO-9000 certified company, made out of extruded 5mm PVC Celuka sheet, mitre cut at two corners and joined with two Nos, of 150mm long brackets of 15mmx15mm M.S Square tube. The two vertical door profiles are to be reinforced with 20mm x20mm M.S tube of 19 guage throughout the frame. The door frame shall be fixed to the wall using 65/100mm long M.S screws through the frame by using PVC Fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete as per manufractures complete all as specified and directed by Engineer-in-Charge

Supply & fix 30mm thick Rajshri brand factory made internal PVC one side Prelem door shutter wood Free consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles as well as top bottom & lock rail. The inside panel shall consist of 20mm thick multi chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement adhesive with 5mm (+0.5) thick prelam PVC sheet of the inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet baton(made by sticking 2Nos. rigid foam PVC sheets of 5mm (+0.5) thickness using PVC solvent cement adhesive. 20mm thick (5mm x 4 Nos) Thick PVC sheet to be given for lock provision at lock provision at lock height complete all as specified and directed by Engineer-in-Charge.

Material & labour for 100 mm sizebutt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Supply & fix 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Material & labour for rendering on concrete surfaces 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair complete all as specified and directed by Engineer-in-Charge.

Supply only water proofing compound complete all as specified and directed by Engineer-in-Charge.

Supply & fix rubber beading for fixing of glass of item No 46 above complete all as specified and directed by Engineer-in-Charge.

Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 20/22mm dia fancy type SS 304 grade curtain rods with wall thickness not less than 1.25mm, fixed to walls with and including a pair of fancy type SS brackets and SS clamps best quality as approved by GE complete all as specified and directed by Engineer-in-Charge. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length)

Taking up on down steel tubing and connection incl cleaning for refining complete all as specified and directed by Engineer-in-Chargeof the following bore of pipe

15mm bore of pipe

20mm bore of pipe

25/32mm bore of pipe

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge of following sizes

20mm bore of pipe

25mm bore of pipe

32mm bore of pipe

Supply & fix in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge following bore of pipe

100/110mm dia of pipes

75mm dia of pipe

Supply & fix UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engineer-in-Charge of following size

110mm dia of pipe

75mm dia of pipe

Supply & fix UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge of following sizes

110mm dia of pipe

75mm dia of pipe

Supply & fix PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge of following sizes

110mm dia of pipe

75mm dia of pipe

Supply & fix PVC (SWR) vent cowl any radius complete all as specified and directed by Engineer-in-Charge of following sizes

110mm dia of pipe

75mm dia of pipe

Supply & fix in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix 32mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 750 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - QQT-7167B or any other equivalent make as approved by GE.

Supply & fix in repairs chromium plated soap dish holder complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - AQN-7731 or any other equivalent make as approved by GE.

Supply & fix in repaires chromium plated towel rail 24" long between flanges complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - AQN-7711 or any other equivalent make as approved by GE.

Supply & fix in repairs of vitreous China table top wash basin, P. Ivory, size 695mm x 370mmx145mm including chromium plated waste coupling, plug and chain, necessary brackets complete all as specified and directed by Engineer-in-Charge. Make : CERA, STATSON, Cat No - 10015 or any other equivalent make as approved by GE

Supply & fix in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of piep complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - QQT-7037 or any other equivalent make as approved by GE

Supply & fix in repairs Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - QQT-7053 or any other equivalent make as approved by GE

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern)(wall hung type) Ivory (excluding, flushing cistern and flush pipe) complete connected to drain complete all as specified and directed by Engineer-in-Charge.Make : CERA, CAMPBELL, Cat No - S1043136 or any other equivalent make as approved by GE

Supply & fix in repairs Hand health Faucet spray to EWC with PVC nozzle, and PVC flexible pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix i in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVCflexible pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated toilet paper holder complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - AQN-7751 or any other equivalent make as approved by GE

Supply & fix in repairs chromium plated metropole flush valve dual flow concealed type woth control cock operation plate 40 mm size including fixed to steel pipes or union complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - FLV-1089Q or any other equivalent make as approved by GE

Supply & fix in repairs PVC shelf fixed to walls with screws including necessary drilling holes complete all as specified and directed by Engineer-in-Charge. Make : Prayag or any other equivalent make as approved by GE

Supply & fix in repairs PVC corners fixed in bath rooms with screws including necessary drilling holes complete all as specified and directed by Engineer-in-Charge. Prayag or any other equivalent make as approved by GE

Supply & fix 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge

Supply & fix 18mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge

Supply & fix 12mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge

Supply & fix 5mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs mild steel polished kitchen cabinet drawer sliding channel of size 16 inch manually type closing box complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100mm thick extruded brass handles, fabricated type polished of length complete all as specified and directed by Engineer-in-Charge.

Supply & fix 75mm size butt hinges,cast brass with mild steel hinge pin bright polished typeB-11 complete all as specified and directed by Engineer-in-Charge.

Supply & fix taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and over plaster 10 mm thick on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 0.3 Litre per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and directed by Engineer-in-Charge (WPC shall be mesured and paid seprately)

Material & labour for cement concete type B-1,1:2:4 mix (using 20 mm grade aggregate) as in copings including necessary form work complete all as specified and directed by Engineer-in-Charge

formwork, rough finished to flat sides of pillars, posts, struts, piers, columns etc complete all as specified and directed by Engineer-in-Charge

Material & labour for RCC 1:2:4 using 20mm graded aggregat in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles complete all as specified and directed by Engineer-in-Charge.

Material & labour for 60 mm thick (M-35 mix) with grey cement and pigment, glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm thick compacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge. Note:- Sand bed measure and paid separately

Material & labour for fine aggregate (sand) complete all as specified and directed by Engineer-in-Charge

Supply & fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge

Material & labour for providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032) complete all as specified and directed by Engineer-in-Charge

Material & labour for PCC type B1 1:2:4 using 20mm graded stone aggregate in copings and the like including weathering slightly rounded or chamfered angles and throating as directed including use of necessary formwork complete all as specified and directed by Engineer-in-Charge

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge

Supply & fix in pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed by Engineer-in-Charge.

Supply & fix 12mm average width of aperture size of wire mesh netting of galvanised steel wire 1.40mm nominal dia fixed with tinned tacks of wire staples, nuts and bolts incl welding complete all as specified and directed by Engineer-in-Charge.

Supply & fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new or previously untreated concrete extrernal surfaces and applying two coats of exterior emulsion paint complete all as specified and directed by Engineer-in-Charge

Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of Acrylic putty by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old plastered or unplastered old decorated surfaces of wall and applying two coat of exterior emulsion paint over a coat of water base primer complete all as specified and directed by Engineer-in-Charge

Material & labour for preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of new steel painted surfaces of any description exc 10 cm width or girth and appying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants,regulators, sockets etc.incl removing materials to store for kepping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.

Taking down main switch/DB’s/ energy meter including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.

Taking down extng Ceiling fan/ Exhaust fan of any description and making good to disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge ( Old Ceiling/ Exhaust Fan to be deposited in MES Store Yard under AGE E/M Sub Divn) .

Taking down old light fittings of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.

Taking down old submain wiring of any size complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5mm FRLSH PVC insulated unsheathed copper earth wire including Suitable for switches and sockets complete all as specified and directed by Engineer-in-Charge.

One light point controlled by one, one way switch single pole piano type

One Fan/exhaust point controlled by one, one way switch single pole piano type each

One 3 pin 5/6 Amps socket out let on independent board

One 3 pin 5/6 Amps socket out let on same board

All as per item No 6 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15/16 Amps socket out let on independent board. complete all as specified and directed by Engineer-in-Charge.

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6 Sqmm single core, copper conductor drawn through PVC Casing capping and 6 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit).

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through PVC Casing caping and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit) .

Supply & fix recess mounting 600 X 600mm luminaire with white acrylic flat light dissipater with LED light source of 36 Watt square shape suitable for recess mounting complete all as specified and directed by Engineer-in-Charge.

Supply & fix surface mounting LED 2X2 feet luminaire with white acrylic flat light dissipater with LED light source of 36 Watt of size 2’x2’(Feet) square shape suitable for surface mounting complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing in replacement wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and as directed by Engineer-in-Charge.

Taking down existing geyser of any capacity , and reinstalling the same after servicing in the same position complete all as specified and directed by Engineer-in-Charge.

Rewinding the existing ceiling fan, fixing the same in position after making serviceable complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement energy saving ceilling fan 1200mm sweep and connecting up including provision of cable from ceilling rose or connector to fan and complete all as specified and directed by Engineer-in-Charge Note Old u/s ceiling fan to be deposited at AGE E/M store yard .

Supply & fix in replacement of ceiling fan regulator Modular Type electronic step type 5 step 360 deg 120 Watt 2 Module complete all as specified and directed by Engineer-in-Charge

Supply & fix PVC body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan complete all as specified and directed by Engineer-in-Charge ( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply & fix metal body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan complete all as specified and directed by Engineer-in-Charge ( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply & fix in replacement ceiling rose surface bakelite 65mm x 50mm three terminal complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement modular switch, 16 Amp flush type 1 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular socket 6A 5 pin 2 in 1 combined 2 module, 240 Volts complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular socket 6/16A twin type 2 module, 240 Volts complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular metal flush box 3 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement modular white cover plate with frame of module 3 flush ISI marked complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 8 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge.

Supply & fix isolators/MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) complete all as specified and directed by Engineer-in-Charge (Note :- Make of the isolator should be the same as that of DB) for the following:

MCB TPN 415 volts 63 Amps Capacity, 10 KA

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA

Supply & fix metal encosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 'C' series complete all as specified and directed by Engineer-in-Charge

Supply, install & testing air cooled split unit Air Conditioner 100% Copper condenser & copper evaporator electric driven single Phase of capacity of 1.5 TR indoor & outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating (as per 2019 BEE rating) including MS stand for outdoor unit, suction and delivery line copper material of suitable length as per site requirement complete including flexible copper cable 3 core 2.5 Sqmm appx 2 M, PVC drain pipe 20mm dia approx 3 RM of including making holes to existing wall to draw cable and pipes to connect the indoor unit to the out door unit including provision of extra copper tubing/ hoses etc and making good the disturbed surfaces complete all as specified and directed by Engineer-in-Charge

SSupply & fix Voltage stabilizer for automatic operation, wall mounted type single phase naturally air cooled indoor type & designed for input variation between 170 V to 260 V with output voltage stabilized at 230 V with low and high cutoff facility including under and over current protection with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed by Engineer-in-Charge.

Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 16 sqmm, 2.0 core complete all as specified and directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel as shown in electrical plate No.3 of SSR Part-I (2009) ccomplete all as specified and directed by Engineer-in-Charge. including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply & fix tubes light grade of 50 mm bore galvanised with all fitting for cable protection trenches/ wall/ on pole including necesarry clamps sets and nut & bolts complete all as specified and directed by Engineer-in-Charge.

OM SREE MAHADEV TRADERS