CONST. OF PLASTIC WASTE MANAGEMENT UNIT AT VILLAGE MOTI BHUJPUR OF TALUKA MUNDRA (AYOJAN /2025-26)

Sr No Item Code Description Qt. Rate 1%L.S Unit Amount Total Amount

Excavation for foundation upto 1.5 m depth including sorting out and

1 04001C stacking of useful materials and disposing off the excavated stuff upto 50 8.19 251.85 2.52 cum 254.37

Meter lead.(C) Hard Murrum ( SR NO 04008C PN NO 64)

Filling in foundation and plinth with murrum or selected soil in layers of

2 04008A cm . Thickness including watering , rumming and consolidating etc, complete 68.00 256.00 2.56 cum 258.56

Providind and laying cement concrete work 1:2:4 ( 1- cement: 2- coarse sand

: 4- grade stone aggregate 20 mm nominal size) and curing complete

3 05011DA excluding cost of framewoek and reinforcement of reinforced concrete work 26.56 3951.11 39.51 cum 3990.62

in (B) Indipendant pier, colums, and pillars , up to floor two level ( up to

ton) (SR NO 05011DA, PN NO 70)5.4.1

Brick work using common burnt clay building brick having crushing strenth

not less then 35 kg./sq.Cm. in foundation and plinth in cement mortor 1:5 (1-

4 06001BA cement : 6- finr sand : (B) conventional (up to 10 ton ) ( SR NO 06001BA PN 19.52 4011.66 40.12 cum 4051.78

ii) Half brick masonry in common brunt clay building bricks having crushing

strength not lessthan 35 Kg/Sq.Cm. in Cement mortar 1:5 (1-Cement : 5 -

coarse sand ) in foundation andplinth (B) Conventional ( SR NO 06008A2A

Providing 10 mm thick cement plaster in single coat on brick/concrete wall

for interior plastering up to floor two leval and finished even and smooth in

(i) cement mortor 1:4 (1-cement : 4 - sand ) ( SR NO 170018 PN NO

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending

7 05014BA binding & placing in position complete up to floor two level. (Pg No 70 It No 930.00 66.59 0.67 kg 67.26

White washing with lime on wall surface (Two coats) to give an even shade

18001+ including thoroughly broming the surface to remove all dirt, dust, mortar

18003 drops and other foreign matter.( 18001+18003 page no 133)18.11 &

Providing and laying white glazed tiles 6 mm thick in flooring treads of steps

and landing on a bed of 12 mm thick ( Cement mortar 1:3 ) 1 Cement 3 sand

) finished with flush pointing the white cement (P No 123 It. No

Providing and laying Alluminium Section Door Material

(As per market rate).

Providing and fixing water closet squatting pan (Indian type W.C. pan) size

580 mm (earth work, bed concrete foot rests and trap to be measured and

paid for separately (V) Vitrous china (i) Long pattern= white colour(P.g

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.(P.g No.157 It.No 23018)23.127

Providing C.I. manhole cover 0.60M x 0.45M size having weight not less than

Providing erecting and fixing double coated (ISI) water tank of required

14 22014 capacity each with all necessary fittings and connection etc. complete on 500.00 3.91 0.04 Ltr 3.95

terrace.(P.g No.151 It.No 22014)

Providing and fixing PVC SWR PIPE IS 13592 90 MM DIA(P.g No.41 It.No

Providing and fixing pillar tap, capstan head, screw down high pressure with

screws, shanks and back nuts. (i) 15 mm dia(P.g No.158 It.No 23029A)23.95

Providing laying an jointinh in true line and level 15mm dia. U.P.V.C. pipe

(SCH - 40) for cold water including fittings make approved by Engineer in

charge. Pipe shall be fixed on the wall with the help or clamp of every two

metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.(P.g No.161 It.No 23061)

eletrification work

TOTAL SAY (1.1)

Sr No Item Code Description Qt. Rate 1%L.S Unit Amount Total Amount

Sr No Item Code Description Qt. Rate 1%L.S Unit Amount Total Amount

Steel work , welded in built up section framed work including cutting,

hoisting,fixing in position and applying a priming coat of red lead paint.(A) in

beam and joints, channels angles tees,flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters, purlins connected to

common rafters and the like (code 11002AA PAGE NO 112)11.4

Providing corrugated G.I sheet of class -3 roofing fixing with glavanished iron

j or L Hook, Bolts and nuts 8 mm dia with bitumen and G.I limpet washer or

G.I limpet washer. Filling with white lead complete excluding the cost of

purlins, rafters and truss . ( 0.80 mm thick sheet) code 15001A p no 126)15.1

3 M535 Rolling shutter having width above 3.5 m(page no 29) 12.00 2514.41 25.14 sq.m 2539.55

4 M380 M.S Road sign board/ village name board non reflective type (P.NO 22) 1.00 1335.59 13.36 each 1348.95

5 L014 Lebour charges for roof fitting each L014 p no 53 10.00 640.00 6.40 each 646.40

TOTAL SAY (1.1)

TOTAL SAY (1.2)

I/We am/are willing to carry out the work at .................................................................................% above/below (percent should be written in figures and words) of the estimated rates mentioned

above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs.714530.80 Put to tender Rs.714530.80

Deduct.......% below Rs................... Add………% Above Rs…………………

Net Rs…………………. Total Rs………………..

*(please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules ie. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills

Signature of Bidder Taluka Development Officer