AMC of Custom Fencing Wall, Gates, Weigh Bridges and screen wall inside cargo jetty area

BILL OF QUANTITY

Name of Work: AMC of Custom Fencing Wall, Gates, Weigh Bridges and

screen wall inside cargo jetty area

Short Description Qty Rate Unit Unit in words Amount

1 Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in

depth, 1.5 m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth lead upto

m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soil One Cubic

2 Providing and laying in position cement concrete of

specified grade including the cost of centering and

shuttering - All work up to plinth level :1:1½:3 (1

Cement: 1½ coarse sand : 3 graded stone aggregate

mm nominal size). One Cubic

3 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level 1:4:8 (1 Cement :

4 coarse sand : 8 graded stone aggregate 40 mm

nominal size) One Cubic

4 Providing and laying in position specified grade of

reinforced cement concrete, including the cost of

centering, shuttering, finishing and excluding the cost of

reinforcement - All work up to plinth level :1:1.5:3 (1

cement : 1.5 coarse sand : 3 graded stone aggregate

mm nominal size). Foundations, footings, bases of

columns, BEAMS AND CANTILEVER LINTEL, LINTEL

BANDS, PLINTH BANDS, BED BLOCK COPPING COLUMN,

PILLARS, POSTS & STRUSS CHAJJAS, slabs, precast One Cubic

members, etc 600.00 6829.33 m3 Metre

5 Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete below plinth level & upto floor five

level Thermo-Mechanically Treated bars of grade Fe-500D

or more 60000.00 62.76 Kg One Kilogram

6 Random rubble masonry with hard stone in foundation

and plinth including levelling up with cement concrete

1:6:12 (1 cement : 6 coarse sand : 12 graded stone

aggregate 20 mm nominal size) upto plinth level with :

Cement mortar 1:6 (1 cement : 6 coarse sand) One Cubic

7 Providing & laying cement concrete solid blocks 1:8:6

(machine made) confirming to relevant IS (Latest Edition)

masonry 200mm thick set in cement mortar 1:6 including

curing etc. complete as directed.

a - ) plinth & foundations & superstructure upto floor two One Cubic

level. 200.00 3500.00 m3 Metre

8 Structural steel work riveted, bolted or welded in built up

sections,trusses and framed work, including cutting,

hoisting, fixing in position all complete.

70000.00 77.81 Kg One Kilogram

9 Structural steel work riveted, bolted or welded in built up

sections,trusses and framed work, including cutting,

hoisting, fixing in position all complete. (Structural steel

to be reused / supplied free of cost by DPT)

50000.00 26.91 Kg One Kilogram

10 Providing & fixing screen wall net as per the details:

The primary layer shall be a green/black 125 GSM mono-

filament HDPE net of Approved make, with a 50% shade

factor and a 5-year UV guarantee, having a tensile

strength of 385 N in warp and 490 N in weft. Eyelets shall

be provided at 1-meter intervals, and the net shall be

supplied in 8 m × 100 m rolls with machine-stitched joints

The secondary layer shall be a green/black 2.5 mm

braided HDPE net of Approved make with a 50 mm mesh,

installed behind the mono-filament net for sag control.

Twine breaking strength of 86 kg and knot strength of

107 kg, providing long-term durability and structural

(WITH VERTICAL JOINT & 2.5 MM GREEN/BLACK COLOR

BRAIDED UV TWINE FOR TYING AT TOP AND BOTTOM ON

Including the cost of labour material machinery tools and

plants required for the work Complete as directed by One Square

Engineer in charge 56000.00 137.50 m2 Metre

11 Supplying and filling in plinth with sand under floors,

including watering, ramming, consolidating and dressing One Square

complete 100.00 1512.84 m2 Metre

12 Providing and laying damp-proof course 40mm thick with

cement concrete 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregate 12.5mm nominal size)

13 12 mm cement plaster finished with a floating coat of neat

cement of mix :

1:3 (1 cement: 3 fine sand) One Square

14 Finishing with Deluxe Multi surface paint system for

interiors and exteriors using Primer as per manufacturers

specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm

over and including one coat of Special primer applied @

0.75 ltr /10 sqm

15 Finishing walls with Acrylic Smooth exterior paint of

required shade :

New work or old surface (Two or more coat applied @

1.67 ltr/10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/10 sqm) One Square

16 Removing oil paint and the like by scrapping, sand

papering and preparing the surface smooth including

necessary repairs to scratches etc. complete. One Square

17 Finishing with Epoxy paint (two or more coats) at all

locations prepared and applied as per manufacturer's

specifications including appropriate priming coat,

preparation of surface, etc. complete On steel work

18 Providing and fixing on wall face unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A,

including jointing with seal ring conforming to IS :

leaving 10 mm gap for thermal expansion,(i) Single

socketed pipes. 110mm OD

100.00 223.83 Rmt metre

19 Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars in main store DPA and

disposal of unserviceable material within 3km lead as per

direction of Engineer - in- charge.

20 Demolishing stone rubble masonry manually/ by

mechanical means including stacking of serviceable

material and disposal of unserviceable material within

metres lead as per direction of Engineer-in-charge : In One Cubic

cement mortar 100.00 1418.97 m3 Metre

21 Dismantling steel work in built up sections in angles, tees,

flats and channels including all gusset plates, bolts, nuts,

cutting rivets, welding etc. including dismembering and

stacking within 50 metres lead

50000.00 3.26 Kg One Kilogram

22 Surface dressing of the ground including removing

vegetation and in- equalities not exceeding 15 cm deep

and disposal of rubbish, lead up to 50 m and lift up to

m All kinds of soil One Square

23 Welding by gas or electric plant including transportation of

plant at site etc. complete One

1000.00 2.38 Cm Centimetre

24 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :Two or more

coats on new work

25 Providing and fixing concertina coil fencing with punched

tape concertina coil 600 mm dia 10 metre openable length

( total length 90 m), having 50 nos rounds per 6 metre

length, upto 3 m height of wall with existing angle iron 'Y'

shaped placed 2.4 m to 4.00 m apart and with

horizontal R.B.T. reinforced barbed wire, stud tied with

G.I. staples and G.I. clips to retain horizontal, including

necessary bolts or G.I. barbed wire tied to angle iron, all

complete as per direction of Engineer-in-charge, with

reinforced barbed tape(R.B.T.) / Spring core (2.5mm

thick) wire of high tensile strength of 165 kg/ sq.mm with

tape (0.52 mm thick) and weight 43.478 gm/ metre (cost

of M.S. angle, C.C. blocks shall be paid separately)

5000.00 212.56 Rmt metre

26 Hire charges for a Hydraulic excavator ( J.C. B.) of loading

capacity 0.5 to 1.0 m3 includingwages of driver , cleaner

and cost of fuel, for 8 hours /day

48.00 6491.00 day One Day

27 Hire charges for Tractor including Trolley of loading

capacity upto 5 MTincluding wages for driver , cleaner and

cost of fuel for 8 hours day

96.00 1113.00 day One Day

28 Hire charges for light crane (Hydra) of loading capacity

upto 5 MT including wages for driver, cleaner and cost of

fuel for 8 hours /day. 48.00 3245.00 day One Day

29 Providing corrugated G.S. sheet roofing including vertical

/ curved surface fixing the sheet on top sloping roof of

storage shed having 10 to 12m height with self-driving

screw of Xylan coated steel 12x65mm minimum size on

roofing and 12x40mm on vertical cladding with pitch

TPI on existing purlins including a coat of approved steel

primer and two coats of approved paint on overlapping of

sheets complete (up to any pitch in horizontal/ vertical or

curved surfaces),excluding the cost of purlins, rafters and

trusses and including cutting to size and shape wherever

required. 0.63 mm thick with zinc coating not less than

150 gm/ m² One Square

30 Providing and laying factory made chamfered edge

Cement Concrete paver blocks In foot path, park & lawns

driveway or light & traffic parking etc. of required

strength, thickness & size/ shape, made by table vibratory

method using PU mould, laid in required colour & pattern

over 50mm thick compacted bed of course sand,

compacting and proper embedding /laying of inter locking

paver blocks into the sand bedding layer through

vibratory compaction by using plate vibrator, filling the

joints with sand and cutting of paver blocks as per

required size and pattern, finishing and sweeping extra

sand, all complete as per manufacturer's specifications

60mm thick Cement concrete paver block of M-35 grade One Square

with approved colour, design & pattern. 4000.00 652.65 m2 Metre

31 Fixing of corrugated G.S. sheet roofing including vertical /

curved surface fixing the sheet on top sloping roof of

storage shed having 10 to 12m height with self-driving

screw of Xylan coated steel 12x65mm minimum size on

roofing and 12x40mm on vertical cladding with pitch

TPI on existing purlins ,excluding the cost of GS SHeet,

purlins, rafters and trusses and including cutting to size

and shape wherever required. One Square

32 Providing and laying water proofing treatment in Gutter

provided on edge and valley of godowns, by applying

damp proof ultra of asian paints or equivalent with brush

consisting of applying :

Cleaning the existing surface with wire brush, scrapping

filling cracks with cement or any chemical compound

Three coats of damp proof ultra of asian paints or

equivalent, evenly over the surface finish smooth

I/we am/are willing to carry out this work at ________% above/ below (percentage should be

written in figure & words). The tendered rates mentioned above amount of my/our tender are put

Estimated amount put to tender Rs. __________ Estimated amount put to tender Rs.____________

In words. (Rupees_______________________ In words (Rupees___________________________

Contractor Superintending Engineer (Harbour)