Loading
Loading…
Loading…
Tender Value
₹5.4 L
EMD Value
₹10,700
Closing Date
20 Apr 2026, 4:00 pmClosed
Xen RnB Division Kargil
Xen RnB Division Kargil
Construction of Hay Shed at SBF Lakthang Drass (By way of Balance work) Under SDP
2026_PWD_18752_3
E tender 02 of 2026-27 PW RnB Division 2nd Kargil
Open Tender
Civil Works - Buildings
Percentage
30 days
Kargil
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Xen RnB Division Kargil
₹10,700
11 Apr 2026
11 Apr 2026
21 Apr 2026
11 Apr 2026
20 Apr 2026
11 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with >25% flyash is recommended.) | 394.42 | Sqm | - | - |
| 2Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Note: It Should have Low or No VOC as per Green Building guidelines) | |||||
| 2.01 | New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
(Note: It Should have Low or No VOC as per Green Building guidelines) | 394.42 | Sqm | - | - |
| 3Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | |||||
| 4 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50
mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS:
277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns using self drilling/ self tapping screws
complete : Ridges plain (500 - 600mm) | 19.51 | RM | - | - |
| 5Structural steel work riveted or bolted in built up section, trusses and framed work,/ door frame work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Gate | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
BOQ_44850.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .