Supply, Installation, Testing and commissioning of CCTV Surveillance System at 34 Nos. of Integrated English Medium Schools

SITC of 4 MP Bullet Camera,60 Mtr. IR with 1/2.8” 4MP PS CMOS Image Sensor or better, Minimum Illumination-0.001 [email protected] (Color, 30 IRE), 0.0001 [email protected] (B/W, 30 IRE), 0 lux (IR on),Video Compression-Instastream, H.265, H.264+, H.264, H.264H, H.264B, MJPEG ,RAM/ROM-128 MB/128 MB, Lens-6mm Fixed Lens, 4 Nos IR LED, S/N Ratio->58 dB,Built-in Mic, Back Light Compensation-BLC/ HLC/ WDR(120dB),SDK and API-Support.

SITC of 16 CH 2 SATA NVR with Camera Supported- 12MP or Better, Supported Compression Technique- H.265 & H.264,Min. Through put (Mbps)- 160 Mbps incoming, 160 Mbps recording and 80 Mbps outgoing, Two-way Audio Supported, Type of Encryption-HTTPS , HTTP ,Supported Network Protocols- HTTP; HTTPS; TCP/IP; IPv4; IPv6; UDP; NTP; DHCP; DNS; SMTP; UPnP; IP Filter; FTP; DDNS; SNMP; Alarm Server; P2P; Auto Registration; IP Search ;CGI; SDK

SITC of 6 TB Surveillance Grade Hard Disk with minimum 7200 RPM.

SITC of 8 Port PoE Switch: Layer-2 Smart Managed PoE Switch having 8 ×10/100/1000 Base-T IEEE 802.3af/at PoE+ ports and 2 × 100/1000 Mbps SFP uplink slots. Switching Capacity: 20 Gbps. Forwarding Rate (64-byte packets): 14.88 Mpps. Minimum 130 Watt PoE power budget with support for IEEE 802.3af PoE and IEEE 802.3at PoE+ on all copper interfaces. Switch shall support 8K MAC address table, 256 static MAC entries, 802.1D STP, 802.1w RSTP, 802.1s MSTP, IEEE 802.3ad Link Aggregation (minimum 4 groups with up to 8 ports per group), 802.1Q VLAN with minimum 256 VLANs, Automatic Surveillance VLAN for ONVIF IP cameras with video traffic prioritization, . OEM Certifications: IEC 62443-4-1: 2018, ISO 9001, ISO 14001 & ISO 45001:2018, ISO/IEC 27001: 2013, ISO 14064-1: 2006. TEC (MTCTE)

SITC of Wi-Fi 6 Dual Band Router having 4 x Gigabit Ethernet LAN port, 1 x Gigabit Ethernet WAN port, 1 x WPS button, 1 x Reset button, 1 x Power connector & 1 x Power on/off button, should support IEEE 802.11ax/ac/n/g/b/k/v/a/h & IEEE 802.3u/ab/bz, should minimum bandwidth support of 574 Mbps @ 2.4 GHz & 2400 Mbps @ 5 GHz, should have 2 x 2.4 GHz internal antennas & 3 x 5 GHz internal antennas, should have Security Protocol WPA/WPA2 - Personal, WPA2 - Personal, WPA2/WPA3 - Personal & WPA3 Only , should support Firewall feature like DoS, Stateful Packet Inspection, Anti-spoofing checking, IP/MAC address filtering & DMZ.

SITC of CAT6 UTP Cable with PVC/Gl Conduit as required: Category 6 Unshielded Twisted Pair (UTP) cable, manufactured using 23 AWG solid bare copper conductors arranged in four twisted pairs with a central separator to minimize crosstalk and ensure reliable high-speed data transmission. The cable shall comply with ANSI/TIA-568-C.2 Category 6 and ISO/IEC 11801 Class E requirements, be UL Listed, ETL Verified, and RoHS compliant, and support Gigabit Ethernet, voice, video, and data applications over structured cabling networks. It shall feature high-density polyethylene (HDPE) insulation, a flame-retardant PVC outer sheath, nominal cable diameter of approximately 6.1 mm, sequential meter marking for easy cable management, characteristic impedance of 100 ±15 Ω, conductor resistance not exceeding 9.38 Ω/100 m, delay skew below 45 ns, and Nominal Velocity of Propagation (NVP) of 69%. The cable shall provide stable transmission characteristics up to 250 MHz, operate reliably within an ambient temperature range of –20°C to +75°C. OEM Certifications: ISO 9001, ISO 14001 & ISO 45001:2018, ISO 14064-1: 2006.

SITC of 9U Wall mount metal rack: 9U wall-mount steel enclosure with 550 mm width and 450 mm depth, designed for secure installation of networking, surveillance, audio-video, and IT equipment. The enclosure shall conform to DIN 41494 or equivalent ISO standards and be fabricated from high-quality CRCA steel with a precision welded construction and durable powder-coated finish for enhanced structural strength and corrosion resistance. It shall feature adjustable 19-inch mounting rails with U-marking, depth-adjustable mounting provisions, a lockable tinted toughened glass front door, ventilated top and bottom panels with cable entry/exit cutouts, and provision for roof-mounted cooling fans to ensure effective airflow and cable management. The enclosure shall support a minimum static load capacity of 40 kg, incorporate grounding and bonding facilities, and provide compatibility with standard 19-inch rack-mount equipment. The rack shall be supplied complete with essential accessories including one 1U cable manager, one hardware kit, one 6- socket 5/15A Power Distribution Unit (PDU), one 230V AC roof-mounted fan unit with minimum 90 CFM airflow. UL Certified. OEM Certifications: ISO 9001, ISO 14001 & ISO 45001:2018, ISO 14064-1: 2006.

SITC of 6U Wall mount metal rack with 6U, 19" 550 mm Width, 450 mm Depth, Wall Mount Networking Enclosure, It should confirm to DIN 41494 or equivalent standard,19" mounting angle made of formed steel, Must be evaluated for UL 2416 standard, Roof Mounted Fan Unit,230V AC, 6 way, 5/15 Amp Power Distribution Unit.

SITC of UTP Modular Plug: Category 6 UTP RJ45 Modular Plug (Male Connector) supporting 8P8C (8 Positions, 8 Contacts) configuration for termination of 4 twisted pairs, suitable for Category 6 structured cabling applications. The connector shall be compatible with 23–24 AWG solid and stranded copper conductors and support both TIA/EIA-568A and TIA/EIA-568B wiring schemes. The plug housing shall be manufactured from high-impact Polycarbonate (PC), UL94V-2 rated, with transparent finish, and shall incorporate copper alloy contact terminals with minimum 50 micro-inch gold plating to ensure low contact resistance, superior conductivity, and long-term reliability. The connector shall support an operating temperature range of -40°C to +80°C, provide reliable Gigabit Ethernet performance for Category 6 cabling systems, and shall be supplied in packs of 100 units. OEM Certifications: ISO 9001, ISO 14001 & ISO 45001:2018, ISO 14064-1: 2006.

SITC of 1 KVA Line Interactive UPS with 1000 VA/600 Watt., Voltage Range-140-300 VAC,Frequency Range-50 Hz , Battery Type & Number-12 V/7 Ah x 2.