REPAIR TO CERTAIN B/R AND E/M ITEMS AT SIYOT UNDER GE ARMY BHUJ.

Amount

S&F in repair PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 15mm dia, any grade, of any description or in any position including fittings complete all as specified and directed .

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 20mm dia, any grade, of any description or in any position including fittings complete all as specified and directed.

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 25mm dia, any grade, of any description or in any position including fittings complete all as specified and directed.

Supplying and Laying 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and Laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed .

Supplying and Laying 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90 gms) complete all as specified and directed.

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe 20mm bore (Minimum weight 112gms) complete all as specified and directed.

S & F in repairs 15mm dia 2-in-1 bib tap with angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions.(Note: MAKE -CONFIRMING TO JAQUAR CAT PART-No. STE -107067 OR EQUIVALENT)

S&F in repairs shower rose 100 mm dia of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed..(Note: MAKE -CONFIRMING TO JAQUAR CAT PART-No. EOS-542N OR EQUIVALENT)

S&F in repair health faucet spray type jet with brass jet, chromium plated, and 1.0 m long PVC flexible pipe complete all as specified and directed .(Note: MAKE -CONFIRMING TO JAQUAR CAT PART-No. STE -107067 OR EQUIVALENT)

S&F in repair Pillar taps cast copper alloy quarter turn, fancy type CP screwed down high pressure for 15mm bore complete all as specified and directed .

S & F in repairs 15mm size PVC connections with PTMT nuts of length 450 mm.complete all as specified and directed. By Engr-in-charge

M&L in repairs 40mm dia Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc complete all as specified and directed.

S&F for Rotational moulded polyethylene water storage tank(white) of 1000 liter capacity (cylindrical vertical with closed top incl float valve) hoisted and fixed in position all as specified and directed.

M&L for preparation of old comougflage pattern steel painted surfaces exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

S&F in repair of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete allas specified and as approved of any fo floowing makes :- HINDWARE / CERA / NEYCER / PARRYWARE/CLASSIC complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each complete all as specified and directed.

Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm both side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening all as per specifications and drawing shown on sl page No 150 of SSR part II (for item-884).complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & both side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed.

S & F Powder coated Aluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F in repair vitreous china Wash down water closet (pedestal pattern), complete including Pedestal pan and trap and seat cover, including connection to drain ( or outgoing pipe) and flushing pipe, antisyphonage pipes etc (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down/ Dismantling existing unserviceable WC of any description and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking out liquid sludge including floating sludge contents from septic tank of any description and in any position and cleaning septic tank up to bottom including walls at any depth from ground level by pumping through sewage disposal pump / honey sucker pump ( as directed by the Engr-in-charge and as on required basis) and removing the liquid sludge outside of the MD land or nearer manhole of civil sewage line in such a manner that there shall be no nuisance and no unhygienic environment complete all as specified and directed. Note: Pump , honey sucker pump and sludge removal van / vehicles shall be arranged by contractor at his own cost and nothing extra shall be governed by the Deptt.

Taking out sedimented sludge left out after taking out and removing liquid sludge/effluent , from septic tank of any description, in any position and of any depth, removing the sludge depositions as directed, cleaning septic tank up to bottom, including walls and removing and disposal of the sedimented/solid sludge at any depth to a distance of n.exc 250 mtr distance and burying in ground complete all as specified and directed by Engr-in-Charge. Note: Pump , honey sucker pump and sludge removal van / vehicles shall be arranged by contractor at his own cost and nothing extra shall be governed by the Depth.

Cleaning of existing chocked/ blocked sewage lines of 200mm bore, of any description and in any position by taking out loose sediment sand, girt, ash, sludge water, rags, fibre or vegetation from the sewage line to any depth from GL including removal of sludge/debris outside of MD L and in such a manner that there shall be no nuisance and no unhygienic environment at the place of disposal complete all as specified and directed .

Opening and cleaning of blockage of kitchen/bath traps or WC any pattern and in any position by rodding, manually or mechanically upto 1st manholes as directed by Engr-in-charge and as on required basis) complete all as specified and directed.

Cleaning of blocked manhole of any description and in any position depth n exc 1.5 m deep mechanically or manually by taking off sludge waste /night soil and silted soil from the existing manhole of any size collecting and removal of sludge in sealed container out of the cantonment area in such a manner that there shall be no nuisance and no unhygienic environment at the places of disposal area complete all as specified and directed.

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slope & gradient and n.exc 10sqm on plan and n 'exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed

Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),250 mm dia pipe of any description and in any position set and jointed in cement mortar complete all as specified and directed .

M&L for concrete bed to drain pipes in cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under, and haunching against the side of the pipes after they are laid tested for pipes of 250mm dia complete all as specified and directed.

S&F jointing and testing for reinforced concrete drain pipes, 250mm bore, class NP-2, laid and jointed with collar in CM (1:1) complete all as directed .

Demolition of RCC manholes covers of any description and in any position complete all as directed.

M&L pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) for manholes covers including placing in position and set in cement mortar (1:4) complete all as specified and directed.

M&L for mild steel TMT 10mm dia and over as in reinforcement cut to length bent to shape required including cranking etc and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed.

Returning ,filling in including spreading levelling watering and well ramming in layers not exc 25cm thick in soil in any depth complete all as specified and directed .

Removing excavated soil/ materials to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as directed .

M&L for exterior grade, coloured, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L providing precast cement concrete rubber moulded coloured interlocking tiles with grey cement and pigment conforming to IS-15658-2006 of 80 mm thick (M-40 grade) of approved design and pattern complete all as specified and directed by Engr-in-Charge

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base all as specified and directed.

Attending complaints related to black smith work and obtaining completion from user including repair of steel frames of doors and windows, CGI roof sheets, steel rolling shutter by drilling/ welding, resecuring of door/ window etc complete all as specified and directed by Engineer in Charge

M & L in repair for Curtain rod, powder coated aluminium alloy of 25mm dia pipe decorative finish with and including supply and fixing powder coated decorated type brackets, stops, rollers etc. fixed on walls with brass screws with PVC rawl plugs as in curtain rods complete all as specified and directed.

Supply only precast cement concrete block Type C1 1:3:6 (20mm graded aggregate)

Supply only ordinary portland Cement

Suppy only 20mm graded aggregate

Suppy only Fine aggregate (Sand) for concrete

S & F Powder coated Aluminium alloy sections sliding windows with frames Series-C 20mm of frame size 92 x 31.75 x 1.90 mm and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 4.8mm thick and stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples all as specified

S&F aluminium powder coated ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos 150mm long in each door, 100mm SS hinges-03 Nos in each shutter,01 Nos hydruallic door closer for each shutter, 150mm long floor door stopper in each shutter, AL anodised tower bolt 200mm long-02 Nos for each shutters, anodised aluminium snap beading, screws etc. complete all as specified Note : Panel filling i.e.. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

S&F in repairs for butt hinges 100mm size medium weight stainless steel .complete all as specified and directed.

M&L in repairs for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S&F in repairs stainless steel sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

S&F 18-19 mm thick plywood with decoretive mica with one side and another side in white mica complete all as directed.

S&F in repairs 20mm dia powder coated decorative type curtain rod incl brackets complete all as specified and diretced.

Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clip and providing and fixing new ones complete all as specified and directed.

S&F prelaminated solid one side decorative and other side plane PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and including fixing at site on wooden frame/Pvc frame as per specifications and drawing complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and directed.

Dismantling 110 mm cast iron /PVC SWR drain pipes, jointed in cement mortar and taking out of trenches, if required (incuding fitting & fixtures) complete all as specified and directed.

Ditto above but 75 mm dia pipe.

S&F in repair 110 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid in tranches complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid in tranches complete all as specified and directed

S&F in repair PVC (SWR) bends, 110 mm bore, any radius complete all as specified and directed.

S&F in repair PVC (SWR) bends, 75 mm bore, any radius complete all as specified and directed.

S&F PVC waste pipe for 32mm bore pipe complete complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Supply & fix rolled mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250)quality A, all as directed.

Dismantling asbestos cement/PPGL Sheet etc (corrugated/semi corrugate/Plain, etc.,) in roof covering/ wall including batten, trusses, complete all as specified and directed.

S&F in reapair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed.

S&F in reapai Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge / roof covering/ cladding to wall, fixed with self tapping screws as specified all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including all fitting and fixtures complete all as specified and directed.

M&L Gl frame work (Size of grid 605 x 605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 10mm PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification.

M&L Preparation of new steel surface exc 10 cm width and girth and applying two coat of synthetic enamel paints over a coat of red oxide primer all as directed .

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, all as directed.

M&L providing precast cement concrete rubber moulded coloured interlocking tiles with grey cement and pigment conforming to IS-15658-2006 of 80 mm thick (M-40 grade) of approved design and pattern complete all as specified and directed.

M&L for 60 mm thick paver blocks rubber moulded PCC M-35 with grey cement and pigment conforming to IS-15658-2006 of approved design and pattern complete all as specified and directed .

M&L In repair for providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) in apex stone/kerb stone with plain fair faces including chamfers, weathering throating etc and set in CM 1:4 complete with joints, size and shape as approved by GE.

M&L for Sand filling under floors or in foundation icl watering and consolidation for laying interlocking tiles complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete/ fair surfaces of block masonry, finished even and smooth without using extra cement with and including mixing water proofing compound as per manufacturers instructions complete all as specified and as directed by Engr-in-Charge. Water proofing compound shall be measured and paid for separately under appropriate item of Sch "A' as supply only on requirement basis

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepration of New plastered Internal wall surface complete applying the following :- (a) M&L wall care putty in two coats on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b) M&L two coat of interior acrylic emulsion over a coat of chalk whitening priming by using Airless spray / Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible

M&L for prepration of New external plastered wall surface complete all as specified complete all as specified and applyingthe following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b) two coat of exterior acylic emulsion in comougflage pattern by using Airless spray / Roller over and incl a coat of acrylic emulsion external primer complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of where using of Mechanical equiment are not posiible

M&L for complete removal of existing treatment including filling depression of scraped surface with wall putty two coats on Old external wall surfaces of any desciption , prepratio of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology , complete all as specified and applying the following :- (a) M&L two coats of exterior acylic emulsion in comougflage pattern by using Airless spray / Roller over and incl a coat of acrylic emulsion external primer complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of where using of Mechanical equiment are not posiible

M&L for complete removal of existing treatment including filling depression of scraped surface with wall care putty in two coats on old internal wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as specified and directed complete and applying two coat of interior acrylic emulsion of approved tint over a coat of primer on old prepared surface by using Airless spray / Roller over complete all as specified & directed. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible

M&L for Preparation of old decorated surfaces of comougflage pattern wall including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of cement paint and other foreign material, scrapping down, moss and efflorescent salts, washing, rubbing down and stopping of painted surface and M&L for applying Two coats of cement base paint incl watering and curring of surfaces adequately before and after application of cement base paint compelete all as specified and directed.

Demolition of concrete block masonry built in cement mortar or cement lime mortar complete all as directed by Engr-in-Charge

M&L for precast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete Type B-1, 1:5:10 (20mm graded aggregate and 12.50 mm in the ratio as directed and specified.

Demolition of concrete (unreinforced) of any description and in any position not specifically provided for complete all as directed by Engr-in-Charge

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation of manholes, mass concrete etc. complete all as directed.

Supply only water proofing compound all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles, coloured tiles 600X300 x 7mm thick on vertical faces i.e.. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles double charged 10mm thick (square/rectangular), polished, coloured (light shade as approved), size of each tile 600 x 1200mm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed. Make: Johnson (Marbonite)/Kajaria/Somany/ Orient Bell Granito/ Asian Granito/ Oracle Grenito (Marbito)

M&L for vitrified ceramic tiles double charged10mm thick (square/rectangular), polished, coloured (light shade as approved), size of each tile 600 x 1200mm,as in as in vertical surface like dado/ skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed. Make: Johnson (Marbonite)/Kajaria/Somany/ Orient Bell Granito/ Asian Granito/ Oracle Grenito (Marbito)

Dismounting, window AC 1.5/2.0 TR to the ground level, transporting to near water point in the complex, taking out the AC from outer cover, washing the unit with soap solution jet followed by clean water jet, drying, wiping, transporting back & re-fixing at original position complete all as specified and directed.

Servicing of split type AC of capacity 1.5/2.0 TR capacity of any make by washing the outdoor unit condenser coil with soap water jet followed with clean water jet and indoor unit with the help of blower, wipe and clean the unit with dry cloth complete all as specified and directed . Note:- Cost of hiring T&P i.e. blower, pressure pump bucket hose pipe deemed to be included.

M&L for servicing of following appliances comprising of through cleaning, lubricating of all moving parts, replacement of wornout screws, bolts etc to make the unit for smooth operation for :-

(a) Water coolers 40 to 150 ltrs cooling capacity.

(b) Refrigerator of 165 to 310 ltrs capacity.

Taking down defective /unserviceable AC rotary compressor of any make of capacity 1.5 TR and replacing with new rotary compressor of make Tecumseh, Toshiba, Mitsubishi, Hagelin refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge.

Taking down defective /unserviceable AC rotary compressor of any make of capacity 2.0 TR and replacing with new rotary compressor of make Tecumseh, Toshiba, Mitsubishi, Hagelin refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge.

Taking down defective /unserviceable AC reciprocating compressor of make Tecumseh /kirloskar /emerson of capacity 1.5 TR , transporting to company authorized outlet , collecting company repaired compressor of same make in replacement of unserviceable compressor, transporting back to site, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge.

Taking down defective /unserviceable AC reciprocating compressor of make Tecumseh /kirloskar /emerson of capacity 2.0 TR , transporting to company authorized outlet , collecting company repaired compressor of same make in replacement of unserviceable compressor, transporting back to site, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge.

M&L for checking for leakages, creating vacuum, charging of R-410 gas in the unit to the required pressure complete all as specified and directed by Engr-in-Charge for the following appliances:-

(a) Split type AC 1.5/2 Ton capacity.

(b) Window type AC 1.5/2.0 Ton capacity

(c) Water coolers 40 to 150 ltrs capacity.

(d) Refrigerator of 165 to 310 ltrs capacity.

Supply and replace capacitors of the following capactities for ACs water coolers, refrigerators, etc as per site requirement.

M&L for shifting of split type AC from one location to other location including fixing evaporator unit with gitties/fastner, cutting wall/concrete incl arrangement of T&P for laying copper tubing, positioning condensing unit, laying copper tubing incl brazing work, connecting drain pipe, making good disturbed surface complete all as specified and as directed by engineer-in-Charge. (Note- Any additional copper tubing required for the work is included in the item)

S&F in replacement of wire remote control ( micro- processor) unit suitable make of split type AC 1.5/ 2 TR.

Supply and replace thermostats of of following :-

(a) Window type AC 1.5/2.0 Ton capacity

(b) Split type AC 1.5/2 Ton capacity.

(c ) Water coolers 40 to 150 ltrs capacity.

(d) Refrigerator of 165 to 310 ltrs capacity.

Supply and replace condenser unit of the following appliances including making of all connectiions as specified and directed by Engr-in-charge following :-

(a) Window type AC 1.5/2.0 Ton capacity

(b) Split type AC 1.5/2 Ton capacity.

(c) Water coolers 40 to 150 ltrs capacity.

(d) Refrigerator of 165 to 310 ltrs capacity.

Supply and replace cooling coil of following :-

(a) Window type AC 1.5/2.0 Ton capacity

(b) Split type AC 1.5/2 Ton capacity.

(c) Water coolers 40 to 150 ltrs capacity.

(d) Refrigerator of 165 to 310 ltrs capacity.

Supply and replace condenser fan motor complete with necessary mounting bracke to and base frames for :-

(a) Window type AC of any make capactiy 1.5 Ton cap.

(b) Water coolers of any make and cap 40 to 150 ltrs capacity.

(c) Split type AC of any make and capcity 1.5/2 ton.

(d) Deep freezers of any make & cap 200 to 425 ltrs capacity.

S&F in replacement of PCB of split type AC Cap 1.5/ 2 TR as per existing make and model. Complete all as specified and directed by Engrs - in- charge.

S&F, replacement to air filters of split type AC of 1.5/2.0 TR capacity as per existing pattern, complete all as specified and directed by Engr-in-Charge.

S&F of desert cooler of capacity 3200 CFM with ISI marked suitable size motor,honeycomb pads,min water capacity 55 ltr with Submersible PVC pump for desert cooler 230 volt single phase 50 HZ complete all as specified and directed by Engineer-in-Charge.

Taking down defective /unserviceable refrigarator (upto capacity 260 ltrs) compressor of make tecumseh/kirloskar/emerson , transporting to company authorized outlet , collecting company repaired compressor of same make in replacement of unserviceable compressor, transporting back to site, refixing including brazing work etc, pressure testing & establishing vacuumed for dehydration complete all as specified and directed by Engr-in-Charge.

Taking down defective /unserviceable Refrigrator (upto capacity 320 ltrs) compressor of make tecumseh/kirloskar/emerson , transporting to company authorized outlet , collecting company repaired compressor of same make in replacement of unserviceable compressor, transporting back to site, refixing including brazing work etc, pressure testing & establishing vacuumed for dehydration complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in replacement old unserveceable cable junction box with new pole mounted thermoplastic cable junction box for street light with IP-65 protection, weather proof with metric knockouts for cable entry for outdoor installation with front door opening system including terminals for one incoming and two outgoing cables of size 16/25 sqmm 4 core, one MCB SP 3 to 6 Amp 240V AC with mounting clamp of flat iron, nut, bolt and washers complete all as specified and directed .

M&L for twin core PVC insulated sheathed(heavy duty) unarmoured aluminium conductor cable (for phase,earth and neutral) of size 2.50 Sqmm 3core for connection drawing through pole or GI brackets of street light fittings to junction box complete all as directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft loose soil complete all as specified and directed.

Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables complete all as specified and directed.

S & F GI pipe, light grade, of size 50 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection .

Supplying ,Laying , jointing and testing XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade of size 2 core 10 Sqmm laid in trenches/ducts, floors, fixed to walls etc complete all as specified and directed.

Comprehensive maintenance of DG sets of capcity 62.5 KVA for routine/preventive maintenance, checking up of Engine and Alternator, AMF panel for smooth functioning and attending breakdowns/ complaints as and when required for smooth functioning of DG Set. The type of work/maintenance services to be carried out during comprehensive maintenance are as under:- (a) Cleaning of air filter (b) Checking and adjusting of valve tappet clearance (c) Checking of Engine lubrication system, fuel system, air system, cooling system, mechanical adjustments/rectification and electrical system. (d) Changing of lube oil filter if necessary (e) Changing/cleaning of fuel pre & fine filter (f) Checking and tightening of bolts and nuts (g) Checking of flexible rubber coupling (h) Checking of charging system of the battery. (i) Checking of ‘V’ belt and adjusting the tension (j) Checking of exhaust turbo charger (k) Checking of fuel injector (l) Checking and cleaning of breather pipe (m) Checking of alternator terminals and cable lighteners etc (n) Checking of safety controls operation (o) Checking of speed governors and engine shut down for proper functioning. (p) Checking of proper functioning of self starter and provision and battery charging (q) Greasing of generator (r) Carrying out preventive maintenance, checking as per manufacturer’s recommendations and to make proper functioning/serviceability of u/s RPM meter and hour meter and all engine parameters, gauges throughout the CA period and if required replace with new one without any extra cost.

Supply only set of fuel pre-filters and fine filters as per sample and make of the 62.5 KVA capacities of DG sets for above said capacity

Supply only set of lub/engine oil filters/cartridges as per sample and make, of the 62.5KVA capacities of DG sets for above said capacity

Supply only main contactor for AMF panel model of 62.5 KVA DG set complete all as specified and directed

Supply only micro processed based PCB for AMF panel model of 62.5 KVA DG set complete all as specified and directed

Supply only Auxillary/control contactors (2 NO, 2 NC) of suitable ratings for AMF panels complete all as specified and directed

Supply only battery charger ie step down transformer) fo ratings 100 VA 220-240V/12-14-16 Voltssuitable for AMF panels complete all as specified and directed

Material and labour for radiator anticorrosive coolent conditioner properly mixed up with the radiator water complete all as specified and directed.

Material and labour for lubricant oil for diesel generating set of any capacity and any make complete all as specified and directed by Accepting officer

Dismantling of defective centrifugal pump set/open well pump set, of any make/Model for repairing and reassembling including replacement of defective spare parts by new one of capacity of 5 HP pump set including required MS stud with nuts and bolts etc all as required. Note: (i) Spare parts of the centrifugal pump sets shall be measured and paid separately under relavent item of schedule. (ii) The rates for above items are deemed to include transportation of pumps/ motors to and from workshop with replacement of oil seal, sand guard, bolt gusket, cable packing ring, water seal, bearing bush upper & lower etc as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at authorised workshop.

M & L rewinding of induction motor after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing including complete all as specified and directed at site etc. of capacity 5 HP Motor.

Supply only suitable size bearing for induction motor of 5 HP , after taking out old unservicable complete all as specified and directed at site etc.

Supply and fix in repairs RO Membranes Brakish Water Spiral (CPA3) type, capacity upto 3000 LPH, pressure 12 Kg/Sqcm, MOC Cellulose Polyamide, of Filteration grade 97-98% Salt Rejection of Size 8040 complete with pressure vessels, RO membrane connectors etc Make : Toray/LG/ Hydranautics

S&F in repair Bag filter 4" x 20", type multimedia filter, filtration grade - 5 micron, flow rate not less than 3000 Ltrs / Hr, complete as directed of make Aqualux / Ion exchange / Aqua.

Supply and fix in repairs Cartridge Filter Online wound type of size 2.5" Dia x 20" long, Pressure 3.5 - 4.0Kg/Sqcm, MOC : PP, Filteration Grade 20 Microns, capacity 2.0m3/hr complete.

Dismantling of defective centrifugal pump set of RO plant , of any make/Model for repairing and reassembling including replacement of defective spare parts by new one of capacity of 1/1.5/2 HP pump set including required MS stud with nuts and bolts etc all as required. Note: (i) Spare parts of the centrifugal pump sets shall be measured and paid separately under relavent item of schedule. (ii) The rates for above items are deemed to include transportation of pumps/ motors to and from workshop with replacement of oil seal, sand guard, bolt gusket, cable packing ring, water seal, bearing bush upper & lower etc as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at authorised workshop.

M & L rewinding of induction motor after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing including complete all as specified and directed at site etc. of capacity 1/1.5 HP Motor.

M & L rewinding of induction motor after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing including complete all as specified and directed at site etc. of capacity 2HP Motor.

Supply only suitable size bearing for induction motor of 1/1.5/2 HP , after taking out old unservicable complete all as specified and directed at site etc.

Disconnecting and taking down old PVC tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union, elbow socket, valves, taps etc, all as directed and specified for 20 mm dia pipe complete all as specified and directed.

All as per item No. 157 here in above but 25 mm dia pipe.

All as per item No. 157 here in above but 40 mm dia pipe.

All as per item No. 157 here in above but 50 mm dia pipe.

All as per item No. 157 here in above but 80 mm dia pipe.

Supply and Fixing in any length UPVC pipe 20 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed

All as per item No. 162 here in above but size (25 mm dia).

All as per item No. 162 here in above but size (40 mm dia).

All as per item No. 162 here in above but size (50 mm dia).

All as per item No. 162 here in above but size (80 mm dia).

S & F in repair UPVC Ball valves with operating handle (stop valve) of size 20 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes all as specified and as directed.

All as per item No. 167 here in above but of size (25 mm dia).

All as per item No. 167 here in above but of size (50 mm dia).

All as per item No. 167 here in above but of size (80 mm dia).

Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed.

Testing of water for physical bacteriogical analyisi as per standared/IS cod test from any govt approved recognized lab or NABL approved lab or approved by the GE sample should be collected by Ref of lab.

M & L for sand filling in trenches for cushioning of LT cables punning after filling complete as specified and as directed. Note: Punned thickness shall only be measured and paid

Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables complete all as specified and directed.

Supplying ,Laying , jointing and testing XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade of laid in trenches/ducts, floors, fixed to walls etc complete all as specified and directed.

- ditto- here in before Item 163 but of size 3.5 core 35 Sqmm

- ditto- here in before Item 163 but of size 3.5 core 50 Sqmm

Material and labour for bring the van mounted full automated underground cable fault locator machine at site for find out HT/LT cable fault in underground completely all as specified and directed by Engineer in Charge. Note: (a) Fault machine,cable & T&P required shall be arranged by the contractor.

MCCB Thermal Magnetic release,Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 63 Amps 16 KA complete all as specified and directed. .

MCCB Thermal Magnetic release Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 100 Amps 16 KA complete all as specified and directed.

M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth strip 32X6 mm by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.

Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.

(ii) Earthing strip and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.

Note :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flat twin core cable of size 6 Sqmm complete all as specified and directed.

S & F Flourish black 15W colour water prrof classy and smart look bollard gate light for garden, outdoor type with PCC chamber and necessary excavation complete all as specified and directed.

S&F 3 core 1.5sqmm PVC cable including conduit of size 20mm complete all as specified and directed

supply amd fix post top lantern with polycarbonate cover 40W, anti corrosive surface treatment complete all as specified and directed

Supply and fix pole mounted automatic street light timer panel astronomical made up of suitable size CRCA sheet panel with input voltage of 130 to 250V power failur memory backup and load upto 5KW all as specfied and directd

Note: (1) The contractor shall keep all items readily available at site, which is required for urgent repair works of appliances.

(2) In case of absence of manpower without providing suitable replacement an amount of Rs 1000/- per day shall be recovered as liquidated damage per person per day from the bill.

(3) Common miscellaneous material such as screws any type, nails, washers, insulation tapes, clamps, hooks, which are required for the work the cost of which is deemed to be included in quoted rate.

(4) All tools &tackles, plants, machineries, equipment and material to carry out the work at site which is to be decided by GE (A) Bhuj shall have to be provided by the contractor at his/ her own cost. Workshop shall be setup for rewinding/ repair of ceiling fan, exhaust fan, wall mounted fan, refrigerator, deep freezer & desert cooler. Rewinding machine should be installed in workshop with the latest configuration.

(5) Contractor’s supervisor (electrical engineer) should be available at the site to supervise the works and co-ordinate with the officials.

(6) The electrician on duty round the clock will have to be available at the site service centre created by the contractor & should have mobile phone. In case of absence of electrician, Rs 500/- will be levied as penalty for each instance.

(7) The manpower shall be issued identity card after getting due verification. Uniform should be worn by the manpower having monogram of the firm.

(8) The skilled worker should be facilited with mobile phone to contact on urgent tasks & their numbers should be displayed at various places and forwarded to administration.

(9) The contractor shall ensure safety of his workers and other at site of work and shall be responsible for any consequence arising out of execution of the repair and maintenance works.

(10) The contractor shall ensure that his repair/ maintenance staff is qualified and licensed for their part of work. He shall be responsible for their conduct. The contractor shall be held responsible for any loss or damage to employees’ state insurance corporates property.

(11) All repair and maintenance related complaints shall be attended within two hoursfailing, which a recovery of Rs 500/- per event per hour shall be made from the subsequence payment of the contractor.

(12) The date of repair, unit name & serial number shall be mentioned in neat sticker in the appliances after repair.

(13) Contractor is to collect the faulty appliances from units & return them after repair within a week. No separate charges shall be given for transportation.

(14) To carryout the serving of AC, refrigerator, deep freezer & water cooler, following T&P should be brought at site (service centre):-

(i) Drilling machine for making hole in wall.

(ii) Jet spray for cleaning of indoor and outdoor units.

(iii) Vacuum cleaner

(iv) Ref mechanic tools kit

(15) It is responsibility of contractor to clean the area after repairwork of appliances. Rates are deemed to be include in his quoted rates of respective items.

(16) The same nature of complaints in same location shall be counted as one complaint in internal electrification. Job card and complaint register for entry of complaints shall be provided at his/ her own cost.

(17) The contractor provide test certificate of material to be incorporated in the work.

(18) Any of contractor persons causes damage of equipment or property of Militart station, the contactor will be solely held responsible for the cost of consequences thereof.

(19) In the event of the contract work getting delayed due to reasons attributable to the contractor, the department shall be levying the penalty at the rate of 5% per week to the maximum of 10% of the contract value.

(20) Contractor shall carry out all test. The equipments shall conform to Indian standards.

(21) Contractor shall identify the real cause of burned winding of fan motor. Winding problems that are identified should be documented. Then, winding of fan motors shall be cut/ removed completely in presence of officials. Rewinding of same shall be carried out with proper copper gauge wire.

(22) Work diary & hindrance register of maintained by the contractor. The both shall be deposited to department daily.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Bhavik Construction (BID ID -3508483)

machine vision plus (BID ID -3513666)