Electrical Landscaping Work for Residential Campus

Supplying, fabricating, installing, testing and commissioning of outdoor floor-mounted weatherproof LT control panel fabricated from 14 SWG galvanized sheet /CRCA sheet steel, dust and vermin proof, having minimum IP55 degree of protection, complete with sloping canopy, hinged lockable front door, removable gland plate, cable alley, earthing studs, danger notice, and powder-coated finish . The panel shall be of adequate size to accommodate one No. 6-way TPN vertical distribution board, along with suitable syntax box with DIN rail arrangements for mounting one no. contactor, one no. programmable digital timer, and associated control accessories including a 4P MCB. The panel shall be complete with internal wiring, terminal blocks, connectors,mounting brackets,fasteners,sealing gaskets,cable entry provisions, gland plate, interconnections, hardware, and all accessories required for satisfactory operation. The panel shall be provided with a suitable MS pedestal/stand fabricated from structural steel sections, securely fixed to a PCC foundation using approved anchor fasteners. The panel shall be designed in accordance with relevant IS and IE rules. Detailed fabrication drawings, dimensions, component layout, and foundation drawings shall be submitted to the Engineer-in-Charge for approval prior to commencement of fabrication. The item shall be complete in all respects including installation, testing, commissioning, and handing over as required.

Supplying, fabricating, installing, testing and commissioning of outdoor floor-mounted weatherproof LT control panel fabricated from 14 SWG galvanized sheet /CRCA sheet steel, dust and vermin proof, having minimum IP55 degree of protection, complete with sloping canopy, hinged lockable front door, removable gland plate, cable alley, earthing studs, danger notice, and powder-coated finish . The panel shall be of adequate size to accommodate one No. 4-way TPN vertical distribution board, The panel shall be complete with internal wiring, terminal blocks, connectors,mounting brackets,fasteners,sealing gaskets,cable entry provisions, gland plate, interconnections, hardware, and all accessories required for satisfactory operation. The panel shall be provided with a suitable MS pedestal/stand fabricated from structural steel sections, securely fixed to a PCC foundation using approved anchor fasteners. The panel shall be designed in accordance with relevant IS and IE rules. Detailed fabrication drawings, dimensions, component layout, and foundation drawings shall be submitted to the Engineer-in-Charge for approval prior to commencement of fabrication. The item shall be complete in all respects including installation, testing, commissioning, and handing over as required.

Supplying and fixing 6 way(8+18), vertical type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)Legrand or techno equivalent etc.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (8 + 12), Double door

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A

Supplying and fixing 6-32A , Four pole, 430 V, C curve Miniature circuit breaker (MCB) in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple Pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single Pole

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 A

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Upto 35 sq. mm