Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹3.2 L
Closing Date
29 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
EAST WORKS
17 conditions · 4 needing a document upload
Financial Eligibility Criteria: as per Clause 10.2 of Part-I of IRSGCC-2022 and as per Railway Board Advance correction slip No.1 dated 14-07-2022 The tenderer must have minimum average annual contractual turnover of V/N or "V" which ever is less: where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Financial Eligibility Criteria: As per Clause 10.2 of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) and the same is mentioned in Para No.10.2 page no. 15 of this tender document. Tenderer should attach Self-attested/ Digitally signed copy of Certificate showing minimum average annual contractual turnover as per Annexure VIB of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) in Annexure - "F"Page-32 of Master Document - 1 attached to the tender
Similar Nature of work : C-5 : "Any Civil Engineering Work/Zonal maintenance works."
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the 1.1.1 Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing
Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work 1.1.2 experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
17 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus fifteen percent ) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e. OS/Tenders/Engg)/BZA Division) as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General Instructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender document and strictly adhere to the instruction and directions given therein.
Annual Zonal Contract - Satyanarayanapuram Railway Colony, Governorpet Railway Colony and All India Radio Colony roads and buildings in SSE/Works/G.Pet/BZA & SSE/Works/STPM sections under ADEN/ Bldgs/BZA Jurisdiction for the period 1.7.2026 to 30.6.2027.
E-Zone-East-09-2026
E-Zone-East-09-2026
Open
Works - General
12 Months
Krishna, Andhra Pradesh
₹0
₹3.2 L
29 May 2026
8 May 2026
15 May 2026
78 items across 1 schedule · ₹10,71,284 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | S u p p l y of Hydraulic d o o r closure ISI marked (IS:3564-1996) e t c . of standard make with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 45.00 | 754 | 33,930 |
| 2 | Supply o f Oxidised m ild steel sliding d o o r bolt 3 0 0 x 1 6 m m e t c w i t h all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 121 | 12,100 |
| 3 | Supply o f Oxidised m ild steel sliding d o o r bolt 2 5 0 x 1 6 m m e t c w i t h all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 80.00 | 108 | 8,640 |
| 4 | Supply of Oxidised mild steel handles 125 mm etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 130.00 | 27 | 3,510 |
| 5 | Supply of Nails 25-100mm long etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 68.00 | 78 | 5,304 |
| 6 | Supply of Second class teak wood in scantling etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | cudm | 500.00 | 104.6 | 52,300 |
| 7 | Supply of 1.0mm thick decorative laminated sheet (Mat finish) etc with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 50.00 | 396 | 19,800 |
| 8 | Supply of Water proof ply 12mm thick etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 20.00 | 707 | 14,140 |
| 9 | Supply of UV stabilised 2mm thick plain/corrugated GFRP sheet etc. with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Sqm | 20.00 | 657 | 13,140 |
| 10 | Supply of Ply wood 5 ply with commercial ply on both faces 6 mm thick etc with a l l contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 20.00 | 412 | 8,240 |
| 11 | Supply of Nut and bolts with washers of all sizes etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 80.00 | 70 | 5,600 |
| 12 | S u p p l y of U-PVC p i p e s (working pressure 4 kg/cm2) Single socketed pipe 75m dia etc with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Metre | 20.00 | 94 | 1,880 |
| 13 | S u p p l y of U-PVC p i p e s (working pressure 4 kg/cm2) Single socketed pipe 110mm dia etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Metre | 100.00 | 175 | 17,500 |
| 14 | Supply of White plastic W C seat (solid) with lid C.P. brass hinges and rubber buffers etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 40.00 | 552 | 22,080 |
| 15 | Supply of white, vitreous china w etc., - Flat back wash basin of size 600x450 mm e t c w i t h all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 5.00 | 977 | 4,885 |
| 16 | Supply of Vitreous china Orrisa type w.c. pan size 580 mm (White) etc with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 20.00 | 1,738 | 34,760 |
| 17 | Supply o f Vitreous c h i n a pedestal t y p e water c l o s e t ( W h i t e ) e t c . w i t h all contractors transportation, l e a d & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 30.00 | 1,381 | 41,430 |
| 18 | Supply of C.I. bracket for wash basin and sinks etc w i t h a l l contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Pair | 30.00 | 119 | 3,570 |
| 19 | Supply of Coloured (other than black)solid P.V.C. seat in European W.C. pan etc. with all contractors transportation, lead & lift, taxes, stacking at desired location etc. as per as directed by the Engineer In charge at site. | Each | 22.00 | 472 | 10,384 |
| 20 | Supply of Rectangular shape 453x357 mm Mirror with Plastic moulded frame etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 35.00 | 391 | 13,685 |
| 21 | Supply of Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 7 0 0 m m i/c PVC waste fittings etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 70.00 | 34 | 2,380 |
| 22 | Supply of Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 7 0 0 m m i/c PVC waste fittings etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 55.00 | 44 | 2,420 |
| 23 | Supply of Polyvinyl chloride sheet 400 micron thick etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 100.00 | 61 | 6,100 |
| 24 | Supply of Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 20.00 | 404 | 8,080 |
| 25 | Supply of galvanised wire mesh of average width of aperture 1.4mm and nominal diameter of wire 0.63mm including all contractor's labour, lead and lift, taxes and including stacking at desired location as per t h e directions of Engineer in charge at site | Sqm | 500.00 | 340 | 1,70,000 |
| 26 | Supply of Stone Aggregate (Single size) : 1 0 mm nominal size with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | cum | 17.00 | 1,819 | 30,923 |
| 27 | Supply of Stone Aggregate (Single size) : 0 6 mm nominal size with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | MT | 5.00 | 1,886 | 9,430 |
| 28 | Supply of Unslaked lime with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Quintal | 6.00 | 414 | 2,484 |
| 29 | Supply of GI binding wire with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 35.00 | 62 | 2,170 |
| 30 | Supply o f Oxidised mild steel tower bolt (barrel t y p e ) 2 0 0 x 1 0 m m with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 125.00 | 46 | 5,750 |
| 31 | Supply of Oxidised mild steel screws 20 mm with a l l contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 5000.00 | 0.43 | 2,150 |
| 32 | Supply o f Anodised Aluminium sliding doo r bolt 300x16 m m w ith all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 30.00 | 198 | 5,940 |
| 33 | Supply o f Anodised Aluminium sliding doo r bolt 250x16 m m w ith all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 70.00 | 172 | 12,040 |
| 34 | Supply of Anodised Aluminium tower bolt (barrel t y p e ) 3 0 0 x 1 0 m m with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 45.00 | 78 | 3,510 |
| 35 | Supply of Anodised Aluminium tower bolt (barrel t y p e ) 1 5 0 x 1 0 m m with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 65.00 | 41 | 2,665 |
| 36 | Supply of Anodised Aluminium tower bolt (barrel t y p e ) 1 0 0 x 1 0 m m with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 65.00 | 30 | 1,950 |
| 37 | Supply of Anodised Aluminium handles 125 mm with plate 175 x 32 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 100.00 | 44 | 4,400 |
| 38 | Supply of Anodised Aluminium handles 75mm with plate 125 x 32 mm with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Numbers | 50.00 | 31 | 1,550 |
| 39 | Supply of Anodised Aluminium hanging type door stopper with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 60.00 | 27 | 1,620 |
| 40 | Supply of Synthetic enamel paint in all shades litre with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Litre | 80.00 | 222 | 17,760 |
| 41 | Supply o f Circular shape 560 m m dia precast R.C.C. manhole cover with frame -H.D. - 20 with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 20.00 | 1,186 | 23,720 |
| 42 | Supply of Square shape 450x450 mm precast R.C.C. manhole cover with frame -L.D. - 2.5 with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 30.00 | 775 | 23,250 |
| 43 | Supply of Water proofing compound (pH>7, Sp.Gravity 1.06±0.02, conforming to IS:2645) with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Litre | 150.00 | 47 | 7,050 |
| 44 | Supply of 15 mm PTMT bib cock with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 40.00 | 88 | 3,520 |
| 45 | Supply of 15 m m PTMT bib cock long body with flange with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 40.00 | 135 | 5,400 |
| 46 | Supply of PTMT push cock 1 5 m m d i a w ith all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 15.00 | 74 | 1,110 |
| 47 | Supply of C.P. Brass angle valve 1 5 m m with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 25.00 | 472 | 11,800 |
| 48 | Supply of Brass full way valve with C.I. wheel (screwed end) 25 mm dia with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 505 | 5,050 |
| 49 | Supply of Unplasticised P.V.C. connection pipe with brass union 45 cm long 15mm bore with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 50.00 | 47 | 2,350 |
| 50 | Supply of Stoneware pipes grade A (60 c m long) 1 5 0 m m d i a with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 70.00 | 168 | 11,760 |
| 51 | Supply of Stone ware spouts 100 m m dia 60 cm long with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 61 | 610 |
| 52 | Supply of H.P. or L.P. ball valve with polythene floats: 20 mm dia including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 15.00 | 323 | 4,845 |
| 53 | Supply of PTMT - Towel Rail (450 mm long ) including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 42.00 | 168 | 7,056 |
| 54 | Supply of Portland Cement (OPC-43 grade) including all contractor's labour, lead a n d lift, taxes and including stacking a t desired location as per the directions of Engineer in charge at site | MT | 13.00 | 6,759 | 87,867 |
| 55 | Supply of white cement from reputed manufactures including all contractor's labour, l e a d a n d lift, taxes and including stacking at desired location as per the directions of Engineer in charge at site | MT | 0.20 | 15,110 | 3,022 |
| 56 | S u p p l y of fine sand(Zone IV) in c lu d in g all contractor's labour, l e a d a n d lift, taxes and including stacking a t desired location as per the directions of Engineer in charge at site | cum | 35.00 | 1,436 | 50,260 |
| 57 | S u p p l y o f b l e a c h i n g p o w d e r i n c l u d i n g all contractor's labour, l e a d a n d lift, taxes and including stacking a t desired location as per the directions of Engineer in charge at site | Quintal | 12.00 | 2,435 | 29,220 |
| 58 | Supply of uPVC coupler for UPVC drainage pipes 110 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 50.00 | 53 | 2,650 |
| 59 | Supply of UPVC plain shoe 110 mm bend with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 30.00 | 63 | 1,890 |
| 60 | Supply of UPVC pipe clip 1 1 0 m m bend with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 19 | 1,900 |
| 61 | Supply of Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 8.00 | 148 | 1,184 |
| 62 | Supply of Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia with all contractors transportation, l e a d & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 168 | 1,680 |
| 63 | Supply of C.I. grating 100x100 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 75.00 | 54 | 4,050 |
| 64 | Supply of Vitreous china pedestal for wash basin with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 1,280 | 12,800 |
| 65 | Supply of Coloured Orissa pattern W.C. pan 580x440 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 5.00 | 2,156 | 10,780 |
| 66 | S u p p l y of Coloured Pedestal t y p e W. C . pan 580x440 mm (European type) with all contractors transportation, l e a d & l i f t , t a x e s , stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 5.00 | 1,145 | 5,725 |
| 67 | Supply of Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings,accessories and flush pipe) with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 15.00 | 775 | 11,625 |
| 68 | Supply of stain steel SS Grade 304 Curtain road20mm dia 1.20mm thick with all contractors transportation, lead & lift, taxes stacking at desired location etc as per as directed by the Engineer in charges at site. | Metre | 150.00 | 168 | 25,200 |
| 69 | Supply o f Vitreous china fl a t b a c k wash basin 630x450 m m including all contractor's labour, lead and lift, taxes etc., a n d as directed by Engineer in charge at site | Each | 10.00 | 977 | 9,770 |
| 70 | Supply of PTMT push cock 15 mm dia including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 15.00 | 74 | 1,110 |
| 71 | Supply of Mirror of superior make glass 60x45 cm including a l l contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 20.00 | 606 | 12,120 |
| 72 | Supply of Brass hanging type door stopper 150 mm including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 10.00 | 104 | 1,040 |
| 73 | Supply of Brass tower bolt (barrel type) 250x10 mm including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 30.00 | 346 | 10,380 |
| 74 | Supply of Brass tower bolt (barrel type) 200x10 mm including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 30.00 | 276 | 8,280 |
| 75 | Supply o f B r a s s handles 1 2 5 m m w i t h plate 175x32 mm including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site | Each | 100.00 | 194 | 19,400 |
| 76 | Supply of Brass handles 100mm with plate 150x32mm including all contractor's labour, lead & lift, taxes etc and as directed by the Engineer in charges at site. | Each | 50.00 | 179 | 8,950 |
| 77 | Supply of PTMT Soap Dish/Holder 138x102x75 mm including all contractor's labour, lead & lift, taxes etc and as directed by the Engineer in charges at site. | Each | 70.00 | 78 | 5,460 |
| 78 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia with all contractors transportation, lead & lift, taxes stacking at desired location etc as per as directed by the Engineer in charges at site | Metre | 100.00 | 172 | 17,200 |
| Schedule total | ₹10,71,284 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1MASTERDOCUMENT09.pdf
ATTACHMENT
2Tenderschedule.pdf
ATTACHMENT
3Buildingconditions.pdf
ATTACHMENT
4Generalconditionsrevised.pdf
ATTACHMENT
7SAFETYTrackConditions.pdf
ATTACHMENT
8Specificationofconcrete.pdf
ATTACHMENT
9SPECIFICATIONSGALVALUMESHEETS.pdf
ATTACHMENT
10SimilarNatureofWorks02-12-25.pdf
ATTACHMENT
11Steelspecialconditions.pdf
ATTACHMENT
5RevisedApprovedlistofBrandsandMakes2026withallenclosures26-02-26.pdf
ATTACHMENT
6DESIGNMIXHQrsLETTERONSPECIALCONDITIONSFORDESIGNMIX2123-03-2022.pdf
ATTACHMENT
12Supplylistofitems.pdf
ATTACHMENT
13TrDSpl.Conditions.pdf
ATTACHMENT
14ESO79-SystemImprovementregarding-OperationofZonalContracts.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .