GENERAL-District court -Renovation of Chamber ,Court hall and Installation of Partition with door behind dais of Hon. District judge ,Alappuzha -2024-25-General Civil Work

Partition work

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

OD108815/2024-2025:Providing and fixing WPC Louver sheet of superior quality, colour and finish as per design complete as per the architectural drawings and the directions of Engineer in charge .

OD354008/2025-2026:Providing and fixing 12 mm thick BWP Grade Marine Plywood with 1.0 mm thick decorative laminated sheet on one side (wooden/glossy with good finish) as per design and as per the direction of Engineer-In-Charge. -Marine plywood conforming to IS : 710 (From DSR Item 9.126.1)

OD354186/2025-2026:Providing and fixing 16 mm thick BWP Grade Marine Plywood as per design and as per the direction of Engineer-In-Charge. -Marine plywood conforming to IS : 710 (From DSR Item 9.126.1)

9.20.3:Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard ) including ISI marked nickel plated bright finished M.S. piano hinges IS : 3818 marked with necessary screws

OD353523/2025-2026:18 mm thick HDF board with both sides decorative lamination including all cost conveyance, labour charge etc complete as per the direction of departmental officers at site excluding cost of fittings

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

OD353524/2025-2026:Supplying and fixing stainless steel auto closer hinges for cupboard shutters with S.S screws, etc complete as directed by the site Engineer-in-charge.

OD353527/2025-2026: Providing and fixing Multipurpose cupboard lock approved quality including all cost conveyance labour charge etc complete as per the direction of Engineer-in-charge

OD44654/2025-2026:Paneling on sides of Dais with 12 mm teak wood planks screwed to existing surface , including all cost of materials , labour charges etc

13.68.1:French spirit polishing:Two or more coats on new works including a coat of wood filler

OD353507/2025-2026:Providing and fixing superior quality horizontal blinds or Zebra blinds for opening including all fittings and labour charges etc. complete.

9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

OD292666/2025-2026:Providing and fixing bright/ matt finished Stainless steel handles of approved quality & make with necessary screws, etc all complete: 200mm

9.77:Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete

OD353530/2025-2026:Providing and fixing G.I door of size 140 x 240 cms made of high quality galvanized steel and state- of - ART technology with unique features like multi point, multi position lever locking system , unique finish, installation accessories etc. with eye catching wooden textures with durable special mat finish heat transmission painting with colour guard and UV protection treatment.

OD353532/2025-2026:Providing and fixing wall mounted 12mm laser cut 304 grade Stainless steel letters of size 13 cm or nearest size including all cost conveyance labour charges etc. complete as per the direction of dept. engineer in charge

OD288674/2025-2026:Labour engaging for cleaning the premises, shifting the materials before and after the completion of work.

OD288687/2025-2026:Blacksmith 1st class engaging maintenance and changing fittings of grill doors , windows and gates

OD288686/2025-2026:Fitter engaging for Aluminium works

OD292498/2025-2026:Labour engaged for emergency plumbing works as per directed by the Engineer-In-Charge

OD288690/2025-2026:Engaging Carpenter for wood work, PVC works etc.