Improvement of road by paver block from Laxmanpara PWD road to H.O Prafulla Sarkar and Pradip Das to H.O Arati Banik etc ,under ward No.50,AMC.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering shuttering - All work upto plinth level 1:3:6(1 cement:3fine sand:6 graded well burnt brick aggregate 20 mm nominal size.)

First class brick work in foundation and plinth including cost of all metarial as required complete In cement mortar 1:4(1cement:4 fine sand)

Providing and laying factory made chamfered edge CementConcrete paver blocks of required strength, thickness & size/shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour& pattern over 50 mm thick compacted bed of sand, compactingand proper embedding/ laying of inter locking paver blocks intothe sand bedding layer through vibratory compaction by usingplate vibrator, filling the joints with fine sand and cutting of paverblocks as per required size and pattern, finishing and sweepingextra sand in footpath, parks, lawns, drive ways or light trafficparking etc. all complete as per specifications & approval/direction of the Engineer -in-Charge:(a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.

12mm cement plaster of mix(1:4)1cement:4 fine sand.

Providing concrete for plain/reinforced concrete in openfoundations complete including formwork as per drawings& MoRD technical specifications Clauses 802, 803, 900,1202 and 1204. (including centering, shuttering, stagingetc. but excluding reinforcement).RCC grade M20 (1:2:4)

Supplying, fitting & placing Thermo-Mechanically treatedbar/ Cold twisted deformed steel bar in substructurecomplete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202.

Providing and laying factory made coloured chamfered edgeCement Concrete paver blocks of required strength, thickness &size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed ofsand, compacting and proper embedding/laying of inter lockingpaver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sandand cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per specifications &approval/ direction of Engineer-in-Charge.(a) 60 mm thick c.c. paver block of M-35 grade with approvedcolour, design and pattern.