Logging While Drilling

Bidder Response Sheet Appendix 9

Tender for hiring of LWD Services along with equipments (Bidder to fill yellow cells)

(1) Quoted Group (2) Currency of quotation: USD

Group Category Max No. of units required Quantity quoted in figure Quantity quoted in words Quoted / Not quoted Local content in %

I Offshore & Onshore 16 16 Sixteen Quoted

II Offshore & Onshore HPHT 2 2 Two Quoted

III Offshore & Onshore Hi-Tech 2 2 Two Quoted

(3) Bidder's Category (Domestic/Foreign) with reference to Clause on GST

(4) Fixed Establishment or Permanent Address in India (of Foreign Bidders with reference to BEC Clause on GST)

(5) Rate of GST included in the quoted rates with reference to BEC Clause on GST. Item wise GST to be quoted against each service

(6) Name and address of Indian Agent, if any

(7) % Indian Agent commission (IAC), if any included in the rates quoted by Foreign bidder.

Note: Bidder to fill the quoted rates in various sheets of priceformat (Yellow cells) upto 2 decimal only.

Bidders to fill prices only in this price format (MS Excel sheet) uploaded in e-portal and upload same excel sheet without making any other changes in MS Excel format only. Price bids submitted in pdf or any other format will not be given cognizance.

Signature of Bidder:

Name of Signatory:

Bidder to fill one of the options Quoted Not quoted

23 Twenty three

1 The bidder must indicate the currency of quotation.

2 Value declared for LIH purpose must be given as per the relevant Unit of Measurement indicated/provided at different places in the Price Format. SET (ST) means two tools i.e., one equipment/tool with an identical backup.

3 If any of the group is not to be quoted the corresponding cell in the Price Format Cover Page shall be clearly marked 'Not Quoted' from the drop down menu.

4 Price shall be quoted only as per the Price Format given in the tender document. Price for all essential tools required for a group must be quoted. Exclusion of any tools, save advanced tools, required for a group shall lead to rejection of offer. No separate charges shall be applicable for accessories of units / tools other than those specified in this Price Format.

5. Operating and Standby day rates:

5.1 Operating and Standby Rates shall be paid pro-rata to the nearest hour.

5.2 Operating and Standby day rates of Surface Recording System (LWD Unit) include corresponding charges of dedicated accessories associated with it. Day rates indicated above will be inclusive of personnel charges, equipment/ tool charges and any other services, spares and consumables as may be required to complete the job. Operating day rate includes depth charges, survey charges, high angle charges, high-resolution charges, engineer/specialist charges and all other charges for carrying out operations as specified in the Contract. No separate charges for the crew is payable.

5.3 Above rate will be payable on the basis of actual services rendered. The number of days indicated in Work Load sheets is for evaluation purpose only. Payment shall be made on the basis of actual number of operating/standby days / occasions.

5.4 Limits on Standby/Operating Day Rates:

5.4.1 Quoted Operating Day Rates / Standby Day Rates for the Surface Recording System should not exceed 30% of the sum of the of corresponding operating / standby day rates of one set each of the following tools

(a) 8-1/2” tools:

LDGRI8 Directional, GR & Resistivity (Induction type)

LADN8 Neutron & Azimuthal Density with Imaging & Caliper

LJX8 Jar & X-Overs

LSDMM8 Steerable Downhole Mud Motors along with Stabilizer & Accessories

LDGRI6 Directional, GR & Resistivity (Induction type)

LADN6 Neutron & Azimuthal Density with Imaging & Caliper

LJX6 Jar & X-Overs

LSDMM6 Steerable Downhole Mud Motors along with Stabilizer & Accessories

5.5.2 Quoted Standby Day Rate of a unit/tool shall not exceed 50% of the corresponding Operating Day Rate of the same unit / tool and shall not be lower than 30% of the corresponding Operating Day Rate of the same unit/tool.

6. Mobilization / De-mobilization Charges:

6.1 Limit on Mobilization Charges of unit: Quoted mobilization charges for LWD Unit shall not exceed the lowest of 3 days’ standby day rate of unit. Demobilization charges of the unit should not exceed the quoted mobilization charges.

6.2 Limit on Mobilization Charges of tool: Quoted mobilization charges for tool shall not exceed the lowest of 15 days’ standby day rate of the same tool. Demobilization charges of the tool should not exceed the quoted mobilization charges.

6.3 100% of mobilization charges of units and tools shall be taken into evaluation (for units/tools to be imported) except for short duration and advanced services as shown in the evaluation sheets. 450% of quoted mobilization charges shall be taken into evaluation for short duration and advanced services as shown in the evaluation sheets. However, for the short term tools available in India, if a bidder confirms in its price bid that these tools shall be made available throughout the contract period in India then mobilization charges for such tools shall not be taken into evaluation (the same is in-built in price evaluation sheet) and also no mobilization charges shall be payable for such tools.

6.4 15% of de-mobilization charges of units and tools shall be taken into evaluation except for short duration and Specialised services as shown in the evaluation sheets. 450% of quoted de-mobilization charges shall be taken into evaluation for short duration and Specialised services as shown in the workload / evaluation sheets.

6.5 No mobilization charges shall be payable for the unit(s)/tool(s) available in India( it is embeded in evaluation sheets). No mob charges shall be payable for units/tools re-mobilized if these units/tools are available in India.

6.6 For tools and services ‘Not Applicable’ with respect to the quoted Group, the corresponding cell(s) should be marked ‘NA’.

6.7 If part(s) of a unit or tool is required to be demobilized, in the event of tool damage, de-mobilization charges prorated for the part(s) shall be payable on the basis of value declared for LIH (If available for parts) or on the basis of FOB, where separate FOB is available for part(s).

7. Customs/Concessional duty: In case of items quoted against this tender are available in India which were imported in the name of ONGC against previous contract(s), it is the responsibility of the CONTRACTOR to get the items transferred in the name of the CONTRACTOR and arrange Customs clearance for their overstay for the proposed contract. The bidders would need to confirm and give an undertaking that all the equipment & tools for deployment against the proposed Contract would be imported on Re-export basis. All required Custom formalities (filing of IGM, identification on 100% examination of goods and as per latest EXIM Policy on submission of re-export bond etc.) would be complied with for imports under re-export basis and the bidder would be responsible for having complied with all Custom formalities.

8 For items required on as and when required basis (marked 'S' in the evaluation sheets), evaluation of mob charges shall be made irrespective of availability of such items in India. However, if a bidder confirms that such items shall be made available in India for the entire duration of contract including that for initial mobilization without any additional charges, then MOB CHARGES for such items will not be taken into evaluation. The list of such items for short term use must be indicated wise in their bid.

9 (i).The Quoted price of LDGRL12 should not be more then the Quoted price of LDGRI12.

10 Other Conditions:

11 For GST refer relevant Clauses in GCC/SCC/ITB/BEC.

12 Quantity of units/tools along with UM must be carefully filled up in the relevant sheets as per the formats.

13 Charges for pre-test/dry test for FPWD tools shall not be paid separately and should be built in the quoted rates irrespective of the no. of pre-test / dry tests

14 Due care and caution must be exercised while quoting rates so that the bids are compliant with various stipulations, conditions and limits set out in the tender. If a bidder has confirmed compliance of various stipulation /limit/ condition(s) set out in the tender in the techno-commercial bid but the stipulation/condition/limit is not satisfied in the price bid, the bid will be evaluated and ranked restricting the charges/amounts upto the specified limit. Rates under the contract to be awarded shall also be restricted to the extent that the stipulation/condition/limit is/are satisfied without increasing any of the quoted rates.

WORKLOAD AND REQUIREMENT OF TOOLS IN DIFFERENT GROUPS

Sl Hole size Description of Unit/ tool ONGC Code UM Quantity of units/tools reqd. Group-I Group-II Group-III

Group-I Group-II Group-III Total OD SD OD SD OD SD

1 All sizes LWD Surface Unit LWDU NO 16 2 2 20 3715 7569 825 793 928 2458

2 All sizes Data transmission system LVSAT NO 16 2 2 20 3715 7569 825 793 928 2458

3 12 1/4" Tools for Hole size - 12 1/4"

3.1 12 1/4" Directional, GR, Resistivity (Induction type) LDGRI12 ST 12 2 2 16 1276 1928 75 113 150 227

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper LADN12 ST 8 2 2 12 1275 1964 75 116 150 231

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling LAPWD12 ST 8 2 2 12 1301 1907 77 112 153 224

3.4 12 1/4" Formation Pressure While Drilling LFPWD12 ST 2 2 1 5 161 1773 9 104 19 209

3.5 12 1/4" Sonic While Drilling LSWD12 ST 0 0 1 1 0 0 0 0 123 147

3.7 12 1/4" Rotary Steerable Drilling System LRSS12 ST 8 2 2 12 1234 2090 73 123 145 246

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM12 ST 7 1 1 9 158 435 9 26 19 51

3.9 12 1/4" Gyro While Drilling LGWD12 ST 3 1 1 5 51 57 3 3 6 7

4 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) LDGRI8 ST 12 2 2 16 1882 2628 111 155 221 309

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper LADN8 ST 11 2 2 15 2016 3208 119 189 237 377

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling LAPWD8 ST 9 2 2 13 2016 3209 119 189 237 378

4.4 8 1/2" Formation Pressure While Drilling LFPWD8 ST 4 2 1 7 650 1894 38 111 76 223

4.5 8 1/2" FormationSampleWhile Drilling LFSWD8 ST 0 0 2 2 0 0 0 0 14 54

4.6 8 1/2" Sonic While Drilling LSWD8 ST 0 0 1 1 0 0 0 0 321 313

4.7 8 1/2" Nulcear Magnetic Resonance LNMRL8 ST 1 0 1 2 96 383 0 0 84 96

4.8 8 1/2" Directional Bed Boundary Imaging LDBBI8 ST 0 0 2 2 0 0 0 0 12 27

4.10 8 1/2" Rotary Steerable Drilling System LRSS8 ST 10 2 2 14 1875 3169 110 186 221 373

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8 ST 6 1 1 8 377 874 22 51 44 103

5 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) LDGRI8H ST 0 2 0 2 0 0 558 276 0 0

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN8H ST 0 2 0 2 0 0 558 276 0 0

5.3 8 1/2" HPHT Formation Pressure While Drilling LFPWD8H ST 0 1 0 1 0 0 8 24 0 0

5.4 8 1/2" HPHT Sonic while Drilling LSWD8H ST 0 1 0 1 0 0 12 27 0 0

5.5 8 1/2" HPHT Rotary Steerable Drilling System LRSS8H ST 0 2 0 2 0 0 528 216 0 0

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8H ST 0 2 0 2 0 0 16 64 0 0

6 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) LDGRI6 ST 5 2 2 9 348 908 20 53 41 107

6.2 6" High Resolution Resistivity Imaging (Latero type) LHRRIL6 ST 0 0 2 2 0 0 0 0 355 792

6.3 6" Neutron,Azimuthal Density with imaging & Caliper LADN6 ST 5 2 2 9 348 908 20 53 41 107

6.4 6" Annulus Pressure and Annulus Temperature While Drilling LAPWD6 ST 4 2 2 8 348 908 20 53 41 107

6.5 6" Formation Pressure While Drilling LFPWD6 ST 3 1 1 5 181 447 11 26 21 53

6.6 6" Sonic While Drilling LSWD6 ST 0 0 1 1 0 0 0 0 5 14

6.7 6" Directional Bed Boundary Imaging LDBBI6 ST 4 1 1 6 55 108 3 6 6 13

6.8 6" Jars & Cross overs LJX6 ST 5 2 2 9 337 873 20 51 40 103

6.9 6" Rotary Steerable Drilling System (Standard) LRSS6 ST 5 1 2 8 337 873 20 51 40 103

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6 ST 4 1 1 6 63 91 4 5 7 11

7 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) LDGRI6H ST 0 2 0 2 0 0 48 72 0 0

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN6H ST 0 2 0 2 0 0 48 72 0 0

7.3 6" HPHT Rotary Steerable Drilling System LRSS6H ST 0 2 0 2 0 0 36 36 0 0

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6H ST 0 2 0 2 0 0 12 36 0 0

8 Other Services applicable for any hole size

8.1 Any size Well placement Service(High angle & horizontal wells) LWPS AU 1 1 1 3 10 0 1 0 1 0

8.2 Any size Horizontal Well Interpretation Service LHWIS AU 1 1 1 3 1 0 1 0 1 0

9 Advanced Services

9.1 12 1/4" Directional, GR, Resistivity (Latero type) LDGRL12 ST 0 0 2 2 0 0 0 0 210 722

9.2 12 1/4" Seismic Profiling While Drilling LSPWD12 ST 0 0 2 2 0 0 0 0 40 48

9.3 8 1/2" Ultra-Sonic Borehole Imager LUBIWD8 ST 0 0 2 2 0 0 0 0 153 286

9.4 8 1/2" Seismic Profiling While Drilling LSPWD8 ST 0 0 2 2 0 0 0 0 84 114

9.5 8 1/2" Look Ahead Deep Resistivity while Drilling LADRWD8 ST 0 0 2 2 0 0 0 0 186 520

9.6 6" Nuclear Magnetic Resosnace LNMRL6 ST 0 0 2 2 0 0 0 0 246 440

OD Operating Days

SD Standby Days

HPHT High pressure high temperature

CURRENCY: USD Annexure-IIIE

(A) PRICE FORMAT FOR ESSENTAIL EQUIPMENTS Bidder to fill yellow cells

Sl Hole size Description of Unit/ tool Appl. Group ONGC Code UM Operating Day Rate exclusive of GST Standby Day Rate exclusive of GST Mob Chg per Occasion per UM exclusive of GST Demob Charges per Occ per UM exclusive of GST Value per UM declared for LIH purpose GST% Operating Day Rate (including GST) Standby Day Rate (including GST) Mob Chgerges per Occasion per UM (including GST) Demob Charges per Occasion per UM (including GST) Value per UM declared for LIH purpose SDR/ODR MOB/SDR DEMOB/MOB

1.0 All sizes LWD Surface Unit I II III LWDU NO 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

2.0 All sizes Data transmission system I II III LVSAT NO 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.0 12 1/4" Tools for Hole size - 12 1/4"

3.1 12 1/4" Directional, GR, Resistivity (Induction type) I II III LDGRI12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper I II III LADN12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling I II III LAPWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.4 12 1/4" Formation Pressure While Drilling I II III LFPWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.5 12 1/4" Sonic While Drilling III LSWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.6 12 1/4" Jars & Cross overs I II III LJX12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.7 12 1/4" Rotary Steerable Drilling System I II III LRSS12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories I II III LSDMM12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.9 12 1/4" Gyro While Drilling I II III LGWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) I II III LDGRI8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper I II III LADN8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling I II III LAPWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.4 8 1/2" Formation Pressure While Drilling I II III LFPWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.5 8 1/2" FormationSampleWhile Drilling III LFSWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.6 8 1/2" Sonic While Drilling III LSWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.7 8 1/2" Nulcear Magnetic Resonance I III LNMRL8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.8 8 1/2" Directional Bed Boundary Imaging III LDBBI8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.9 8 1/2" Jars & Cross overs I II III LJX8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.10 8 1/2" Rotary Steerable Drilling System I II III LRSS8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories I II III LSDMM8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) II LDGRI8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper II LADN8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.3 8 1/2" HPHT Formation Pressure While Drilling II LFPWD8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.4 8 1/2" HPHT Sonic while Drilling II LSWD8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.5 8 1/2" HPHT Rotary Steerable Drilling System II LRSS8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories II LSDMM8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.0 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) I II III LDGRI6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.2 6" High Resolution Resistivity Imaging (Latero type) III LHRRIL6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.3 6" Neutron,Azimuthal Density with imaging & Caliper I II III LADN6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.4 6" Annulus Pressure and Annulus Temperature While Drilling I II III LAPWD6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.5 6" Formation Pressure While Drilling I II III LFPWD6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.6 6" Sonic While Drilling III LSWD6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.7 6" Directional Bed Boundary Imaging I II III LDBBI6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.8 6" Jars & Cross overs I II III LJX6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.9 6" Rotary Steerable Drilling System (Standard) I II III LRSS6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories I II III LSDMM6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) II LDGRI6H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper II LADN6H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

7.3 6" HPHT Rotary Steerable Drilling System II LRSS6H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories II LSDMM6H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

8.0 Other Services applicable for any hole size (* Rate under ODR is the rate per AU)

8.1 Any size Well placement Service(High angle & horizontal wells) I II III LWPS AU 0.0

8.2 Any size Horizontal Well Interpretation Service I II III LHWIS AU 0.0

9.0 Advanced Services

9.1 12 1/4" Directional, GR, Resistivity (latero type) III LDGRL12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.2 12 1/4" Seismic Profiling While Drilling III LSPWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.3 8 1/2" Ultra-Sonic Borehole Imager III LUBIWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.4 8 1/2" Seismic Profiling While Drilling III LSPWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.5 8 1/2" Look Ahead Deep Resistivity while Drilling III LADRWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.6 6" Nuclear Magnetic Resosnace III LNMRL6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

Conditions LDGRL12 LSPWD12 UBIWD8 LSPWD8 LADRWD8 LNMRL6

1 Unit Operating Day rate: 0.00

Sum of Operating Day rate of specified tools : 0.00

Ratio (should not exceed 0.30): #DIV/0!

2 Unit Standby Day rate : 0.00

Sum of Standby Day rate of specified tools: 0.00

Ratio (should not exceed 0.30): #DIV/0!

3 Ratio (SDR/ODR) shall not exceed 0.50 and shall not be lower than 0.30 (Complied: Y; Not Complied: N) Y #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!

4 Mob Charges of unit should not exceed 3 days' unit SDR (Complied: Y; Not Complied: N) Y

5 De-mob Charges of unit should not exceed the Mob Charges (Complied: Y; Not Complied: N) Y

6 Mob Charges of tools should not exceed 15 days' SDR of tool (Complied: Y; Not Complied: N) Y #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!

7 De-mob Charges of tool should not exceed the Mob Charges (Complied: Y; Not Complied: N) Y Y Y Y Y Y Y

ODR SDR Mob Chg per Occasion per UM Demob Charges per Occ per UM

Rates of LDGRL12 should not be greater than rates of LDGRI12 OK OK OK OK

LIH Value Factor to be considered for evaluation Annexure-IIIE

Total max qnty in group 16 Bidder to fill yellow cells Annexure-IIIE

Qty Quoted 16 M8 E8

Price Format Sheet: Group-I Quoted 16 16

Sl ONGC Code UM Type of Service Applicable Qty. of Unit / Tool Qty. of unit/tool available in India, initially Qty. of unit/tool for the short period services that will be made available in India for entire duration of the contract Operating Charges Standby Charges Mobilization Charges Demobilization Charges LIH Value Factor to be considered for evaluation Estimated tool value considered for evaluation (E) Eval. Price without tool value

Operating Days ODR Total(B) Standby Days SDR Total(C) Qty. to be imported initially Mob charges per UM per occ Total Mob Chg(A) Demob Ch per occ per UM Total demob charges (D)

3.0 12 1/4" Tools for Hole size - 12 1/4"

3.5 LSWD12 ST NA 0

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.5 LFSWD8 ST NA 0

4.6 LSWD8 ST NA 0

4.8 LDBBI8 ST NA 0

5.1 LDGRI8H ST NA 0

5.2 LADN8H ST NA 0

5.3 LFPWD8H ST NA 0

5.4 LSWD8H ST NA 0

5.5 LRSS8H ST NA 0

5.6 LSDMM8H ST NA 0

6.2 LHRRIL6 ST NA 0

6.6 LSWD6 ST NA 0

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 LDGRI6H ST NA 0

7.2 LADN6H ST NA 0

7.3 LRSS6H ST NA 0

7.4 LSDMM6H ST NA 0

8.0 *Other Services applicable for any hole size

Total-Essential 0 0 #DIV/0! #DIV/0!

* Rate under ODR for other services is the rate per AU Total Evaluated Price - Essential Items / Services without LIH value factor #DIV/0!

Total estimated price - Essential Items / Services Per unit with out LIH Factor #DIV/0!

Total Evaluated Price - Essential Items / Services with LIH value factor #DIV/0!

Total Evaluated price - Essential Items / Services Per unit with LIH Factor #DIV/0!

Total max qnty in segment 2 Bidder to fill yellow cells

Qty Quoted 2 Annexure-IIIE …… Q8 E8

Price format Sheet: Group II Quoted 2 2

Sl ONGC Code UM Type of Service Applicable Qty. of Unit / Tool Qty. of unit/tool available in India, initially Qty. of unit/tool for the short period services that will be made available in India for entire duration of the contract Operating Charges Standby Charges Mobilization Charges Demobilization Charges Estimated tool value considered for evaluation (E) Estimated tool value considered for evaluation Eval. Price without tool value

WL-Operating Days ODR Total(B) WL-Stand Days SDR Total(C) Qty. to be imported initially Mob charges per UM per occ Total Mob Chg(A) Demob Ch per occ per UM Total demob charges (D)

3.0 12 1/4" Tools for Hole size - 12 1/4"

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.5 LFSWD8 ST NA 0

4.6 LSWD8 ST NA 0

4.7 LNMRL8 ST NA 0

4.8 LDBBI8 ST NA 0

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

6.0 6" Tools for Hole size - 6"

6.6 LSWD6 ST NA 0

7.0 6" HPHT Tools for Hole size - 6"-HPHT

8.0 * Other Services applicable for any hole size

8.1* LWPS AU NA 1 1 0 0 0

8.2* LHWIS AU NA 1 1 0 0 0

0 0 #DIV/0! #DIV/0! #DIV/0!

* Rate under ODR for other services is the rate per AU Total Evaluated Price - Essential Items / Services without LIH value factor #DIV/0!

Total Evaluated Price - Essential Items / Services with LIH value factor #DIV/0!

Total max qnty in segment 2

Qty Quoted 2 Annexure-IIIE …… Q8 E8

Price format Sheet: Group III Quoted 20 20

Sl ONGC Code UM Type of Service Applicable Qty. of Unit / Tool Qty. of unit/tool available in India, initially Qty. of unit/tool for the short period services that will be made available in India for entire duration of the contract Operating Charges Standby Charges Mobilization Charges Demobilization Charges Estimated tool value considered for evaluation (E) Estimated tool value considered for evaluation Eval. Price without tool value

WL-Operating-Days ODR Total(B) WL-Stand Days SDR Total(C) Qty. to be imported initially Mob charges per UM per occ Total Mob Chg(A) Demob Ch per occ per UM Total demob charges (D)

3.0 12 1/4" Tools for Hole size - 12 1/4"

4.0 8 1/2" Tools for Hole size - 8 1/2"

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 LDGRI8H ST NA 0

5.2 LADN8H ST NA 0

5.3 LFPWD8H ST NA 0

5.4 LSWD8H ST NA 0

5.4 LRSS8H ST NA 0

5.5 LSDMM8H ST NA 0

6.0 6" Tools for Hole size - 6"

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 LDGRI6H ST NA 0

7.2 LADN6H ST NA 0

7.3 LRSS6H ST NA 0

7.4 LSDMM6H ST NA 0

8.0 * Other Services applicable for any hole size

8.1* LWPS AU NA 1 1 0 0 0

8.2* LHWIS AU NA 1 1 0 0 0

Total -Essentail 0 0 #DIV/0! #DIV/0! #DIV/0!

9.0 Advanced Services Evaluation Advanced Services Line Item wise with LIH value factor

* Rate under ODR for other services is the rate per AU Total Evaluated Price - Essential Items / Services without LIH value factor #DIV/0!

Total Evaluated Price - Essential Items / Services with LIH value factor #DIV/0!

Group-I Annexure-IIIE

Sl Description of Unit/ tool ONGC Code Distribution UM

3.0 12 1/4" Tools for Hole size - 12 1/4"

3.1 12 1/4" Directional, GR, Resistivity (Induction type) LDGRI12 12 1 1 2 3 4 4 5 6 7 7 8 9 9 10 11 12 ST

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper LADN12 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 ST

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling LAPWD12 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 ST

3.4 12 1/4" Formation Pressure While Drilling LFPWD12 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 ST

3.5 12 1/4" Sonic While Drilling LSWD12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

3.7 12 1/4" Rotary Steerable Drilling System LRSS12 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 ST

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM12 7 1 1 1 2 2 3 3 4 4 4 5 5 6 6 7 7 ST

3.9 12 1/4" Gyro While Drilling LGWD12 3 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 ST

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) LDGRI8 12 1 2 2 3 4 5 5 6 7 8 9 9 10 11 12 12 ST

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper LADN8 11 1 1 2 3 3 4 5 5 6 7 7 8 9 9 10 11 ST

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling LAPWD8 9 1 1 2 2 3 3 4 4 5 6 6 7 7 8 8 9 ST

4.4 8 1/2" Formation Pressure While Drilling LFPWD8 4 1 1 1 1 1 2 2 2 3 3 3 3 4 4 4 4 ST

4.5 8 1/2" FormationSampleWhile Drilling LFSWD8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

4.6 8 1/2" Sonic While Drilling LSWD8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

4.7 8 1/2" Nulcear Magnetic Resonance LNMRL8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ST

4.8 8 1/2" Directional Bed Boundary Imaging LDBBI8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

4.10 8 1/2" Rotary Steerable Drilling System LRSS8 10 1 1 2 2 3 4 4 5 6 6 7 7 8 9 9 10 ST

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8 6 1 1 1 2 2 2 3 3 4 4 4 5 5 5 6 6 ST

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) LDGRI8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.3 8 1/2" HPHT Formation Pressure While Drilling LFPWD8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.4 8 1/2" HPHT Sonic while Drilling LSWD8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.5 8 1/2" HPHT Rotary Steerable Drilling System LRSS8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

6.0 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) LDGRI6 5 1 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 ST

6.2 6" High Resolution Resistivity Imaging (Latero type) LHRRIL6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

6.3 6" Neutron,Azimuthal Density with imaging & Caliper LADN6 5 1 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 ST

6.4 6" Annulus Pressure and Annulus Temperature While Drilling LAPWD6 4 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 ST

6.5 6" Formation Pressure While Drilling LFPWD6 3 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 ST

6.6 6" Sonic While Drilling LSWD6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

6.7 6" Directional Bed Boundary Imaging LDBBI6 4 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 ST

6.9 6" Rotary Steerable Drilling System (Standard) LRSS6 5 1 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 ST

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6 4 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 ST

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) LDGRI6H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN6H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

7.3 6" HPHT Rotary Steerable Drilling System LRSS6H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

8.0 Other Services applicable for any hole size

8.1 Any size Well placement Service(High angle & horizontal wells) LWPS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AU

8.2 Any size Horizontal Well Interpretation Service LHWIS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AU

Group-II Annexure-IIIE

Sl Description of Unit/ tool ONGC Code Distribution UM

1.0 LWD Unit LWDU 2 1 2 NO

2.0 LVSAT LVSAT 2 1 2 NO

3.0 12 1/4" Tools for Hole size - 12 1/4"

3.1 12 1/4" Directional, GR, Resistivity (Induction type) LDGRI12 2 1 2 ST

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper LADN12 2 1 2 ST

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling LAPWD12 2 1 2 ST

3.4 12 1/4" Formation Pressure While Drilling LFPWD12 2 1 2 ST

3.5 12 1/4" Sonic While Drilling LSWD12 0 0 0 ST

3.6 12 1/4" Jars & Cross overs LJX12 2 1 2 ST

3.7 12 1/4" Rotary Steerable Drilling System LRSS12 2 1 2 ST

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM12 1 1 1 ST

3.9 12 1/4" Gyro While Drilling LGWD12 1 1 1 ST

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) LDGRI8 2 1 2 ST

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper LADN8 2 1 2 ST

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling LAPWD8 2 1 2 ST

4.4 8 1/2" Formation Pressure While Drilling LFPWD8 2 1 2 ST

4.5 8 1/2" FormationSampleWhile Drilling LFSWD8 0 0 0 ST

4.6 8 1/2" Sonic While Drilling LSWD8 0 0 0 ST

4.7 8 1/2" Nulcear Magnetic Resonance LNMRL8 0 0 0 ST

4.8 8 1/2" Directional Bed Boundary Imaging LDBBI8 0 0 0 ST

4.9 8 1/2" Jars & Cross overs LJX8 2 1 2 ST

4.10 8 1/2" Rotary Steerable Drilling System LRSS8 2 1 2 ST

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8 1 1 1 ST

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) LDGRI8H 2 1 2 ST

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN8H 2 1 2 ST

5.3 8 1/2" HPHT Formation Pressure While Drilling LFPWD8H 1 1 1 ST

5.4 8 1/2" HPHT Sonic while Drilling LSWD8H 1 1 1 ST

5.5 8 1/2" HPHT Rotary Steerable Drilling System LRSS8H 2 1 2 ST

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8H 2 1 2 ST

6.0 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) LDGRI6 2 1 2 ST

6.2 6" High Resolution Resistivity Imaging (Latero type) LHRRIL6 0 0 0 ST

6.3 6" Neutron,Azimuthal Density with imaging & Caliper LADN6 2 1 2 ST

6.4 6" Annulus Pressure and Annulus Temperature While Drilling LAPWD6 2 1 2 ST

6.5 6" Formation Pressure While Drilling LFPWD6 1 1 1 ST

6.6 6" Sonic While Drilling LSWD6 0 0 0 ST

6.7 6" Directional Bed Boundary Imaging LDBBI6 1 1 1 ST

6.8 6" Jars & Cross overs LJX6 2 1 2 ST

6.9 6" Rotary Steerable Drilling System (Standard) LRSS6 1 1 1 ST

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6 1 1 1 ST

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) LDGRI6H 2 1 2 ST

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN6H 2 1 2 ST

7.3 6" HPHT Rotary Steerable Drilling System LRSS6H 2 1 2 ST

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6H 2 1 2 ST

8.0 Other Services applicable for any hole size

8.1 Any size Well placement Service(High angle & horizontal wells) LWPS 1 1 1 AU

8.2 Any size Horizontal Well Interpretation Service LHWIS 1 1 1 AU

Group-III Annexure-IIIE

Sl Description of Unit/ tool ONGC Code Distribution UM

1.0 LWD Unit LWDU 2 1 2 NO

2.0 LVSAT LVSAT 2 1 2 NO

3.0 12 1/4" Tools for Hole size - 12 1/4" No. of tools

3.1 12 1/4" Directional, GR, Resistivity (Induction type) LDGRI12 2 1 2 ST

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper LADN12 2 1 2 ST

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling LAPWD12 2 1 2 ST

3.4 12 1/4" Formation Pressure While Drilling LFPWD12 1 1 1 ST

3.5 12 1/4" Sonic While Drilling LSWD12 1 1 1 ST

3.6 12 1/4" Jars & Cross overs LJX12 2 1 2 ST

3.7 12 1/4" Rotary Steerable Drilling System LRSS12 2 1 2 ST

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM12 1 1 1 ST

3.9 12 1/4" Gyro While Drilling LGWD12 1 1 1 ST

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) LDGRI8 2 1 2 ST

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper LADN8 2 1 2 ST

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling LAPWD8 2 1 2 ST

4.4 8 1/2" Formation Pressure While Drilling LFPWD8 1 1 1 ST

4.5 8 1/2" FormationSampleWhile Drilling LFSWD8 2 1 2 ST

4.6 8 1/2" Sonic While Drilling LSWD8 1 1 1 ST

4.7 8 1/2" Nulcear Magnetic Resonance LNMRL8 1 1 1 ST

4.8 8 1/2" Directional Bed Boundary Imaging LDBBI8 2 1 2 ST

4.9 8 1/2" Jars & Cross overs LJX8 2 1 2 ST

4.10 8 1/2" Rotary Steerable Drilling System LRSS8 2 1 2 ST

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8 1 1 1 ST

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) LDGRI8H 0 0 0 ST

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN8H 0 0 0 ST

5.3 8 1/2" HPHT Formation Pressure While Drilling LFPWD8H 0 0 0 ST

5.4 8 1/2" HPHT Sonic while Drilling LSWD8H 0 0 0 ST

5.5 8 1/2" HPHT Rotary Steerable Drilling System LRSS8H 0 0 0 ST

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8H 0 0 0 ST

6.0 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) LDGRI6 2 1 2 ST

6.2 6" High Resolution Resistivity Imaging (Latero type) LHRRIL6 2 1 2 ST

6.3 6" Neutron,Azimuthal Density with imaging & Caliper LADN6 2 1 2 ST

6.4 6" Annulus Pressure and Annulus Temperature While Drilling LAPWD6 2 1 2 ST

6.5 6" Formation Pressure While Drilling LFPWD6 1 1 1 ST

6.6 6" Sonic While Drilling LSWD6 1 1 1 ST

6.7 6" Directional Bed Boundary Imaging LDBBI6 1 1 1 ST

6.8 6" Jars & Cross overs LJX6 2 1 2 ST

6.9 6" Rotary Steerable Drilling System (Standard) LRSS6 2 1 2 ST

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6 1 1 1 ST

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) LDGRI6H 0 0 0 ST

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN6H 0 0 0 ST

7.3 6" HPHT Rotary Steerable Drilling System LRSS6H 0 0 0 ST

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6H 0 0 0 ST

8.0 Other Services applicable for any hole size

8.1 Any size Well placement Service(High angle & horizontal wells) LWPS 1 1 1 AU

8.2 Any size Horizontal Well Interpretation Service LHWIS 1 1 1 AU

9.0 Advanced Services

9.1 12 1/4" Directional, GR, Resistivity (Latero type) LDGRL12 2 1 2 ST

9.2 12 1/4" Seismic Profiling While Drilling LSPWD12 2 1 2 ST

9.3 8 1/2" Ultra-Sonic Borehole Imager LUBIWD8 2 1 2 ST

9.4 8 1/2" Seismic Profiling While Drilling LSPWD8 2 1 2 ST

9.5 8 1/2" Look Ahead Deep Resistivity while Drilling LADRWD8 2 1 2 ST

9.6 6" Nuclear Magnetic Resosnace LNMRL6 2 1 2 ST

LWD Surface Unit I II III IV LWDU

Data transmission system I II III IV LVSAT

Tools for Hole size - 12 1/4"

Directional, GR, Resistivity (Induction type) I II III IV LDGRI12

Neutron,Azimuthal Density with imaging & Caliper I II III IV LADN12

Annulus Pressure and Annulus Temperature While Drilling I II III IV LAPWD12

Formation Pressure While Drilling I II III IV LFPWD12

Sonic While Drilling III IV LSWD12

Jars & Cross overs I II III IV LJX12

Rotary Steerable Drilling System I II III IV LRSS12

Steerable Down hole Mud Motors along with stabiliser & accessories I II III IV LSDMM12

Gyro While Drilling I II III IV LGWD12

Tools for Hole size - 8 1/2"

Directional, GR, Resistivity (Induction type) I II III IV LDGRI8

Neutron,Azimuthal Density with imaging & Caliper I II III IV LADN8

Annulus Pressure and Annulus Temperature While Drilling I II III IV LAPWD8

Formation Pressure While Drilling I II III IV LFPWD8

FormationSampleWhile Drilling III IV LFSWD8

Sonic While Drilling III IV LSWD8

Nulcear Magnetic Resonance I III IV LNMRL8

Directional Bed Boundary Imaging III IV LDBBI8

Jars & Cross overs I II III IV LJX8

Rotary Steerable Drilling System I II III IV LRSS8

Steerable Down hole Mud Motors along with stabiliser & accessories I II III IV LSDMM8

Tools for Hole size - 8 1/2"-HPHT

Directional, GR, Resistivity (Induction type) II IV LDGRI8H

Neutron,Azimuthal Density with imaging & Caliper II IV LADN8H

Formation Pressure While Drilling II IV LFPWD8H

Sonic while Drilling II IV LSWD8H

Rotary Steerable Drilling System II IV LRSS8H

Steerable Down hole Mud Motors along with stabiliser & accessories II IV LSDMM8H

Tools for Hole size - 6"

Directional, GR, Resistivity (Induction type) I II III IV LDGRI6

High Resolution Resistivity Imaging (Latero type) III IV LHRRIL6

Neutron,Azimuthal Density with imaging & Caliper I II III IV LADN6

Annulus Pressure and Annulus Temperature While Drilling I II III IV LAPWD6

Formation Pressure While Drilling I II III IV LFPWD6

Sonic While Drilling III IV LSWD6

Directional Bed Boundary Imaging I II III IV LDBBI6

Jars & Cross overs I II III IV LJX6

Rotary Steerable Drilling System (Standard) I II III IV LRSS6

Steerable Down hole Mud Motors along with stabiliser & accessories I II III IV LSDMM6

Tools for Hole size - 6"-HPHT

Directional, GR, Resistivity (Induction type) II IV LDGRI6H

Neutron,Azimuthal Density with imaging & Caliper II IV LADN6H

Sonic while drilling #N/A LSWD6H

Rotary Steerable Drilling System II IV LRSS6H

Steerable Down hole Mud Motors along with stabiliser & accessories II IV LSDMM6H

Well placement Service(High angle & horizontal wells) I II LWPS

Horizontal Well Interpretation Service I II LHWIS

Advanced Services

Directional, GR, Resistivity (latero type) III IV LDGRL12

Directional, GR, Resistivity (latero type) #N/A LDGRL8

Seismic Profiling While Drilling III IV LSPWD12

Ultra-Sonic Borehole Imager III IV LUBIWD8

Seismic Profiling While Drilling III IV LSPWD8

Look Ahead Deep Resistivity while Drilling III IV LADRWD8

Nuclear Magnetic Resosnace III IV LNMRL6

Major Breakup details of LIH Value per UM declared by Bidder for each equipment

Note: (i) Total value of Break-up of Major items which can be LIH should be less than or equal to LIH value declared per UM in Price_Form

(ii) Bidder can addup rows as per requirement

Sl.No Unit/Tool/Equipment LIH Value declared per UM in Price_form Break-up of Major Items which can be LIH

Price Format Annexure IIIE/ IV

Tender for hiring of LWD Services along with equipments (Bidder to fill yellow cells)

(1) Quoted Group (2) Currency of quotation: USD

Group Category Max No. of units required Quantity quoted in figure Quantity quoted in words Quoted / Not quoted

I Offshore & Onshore 16 16 Sixteen Quoted

II Offshore & Onshore HPHT 2 2 Two Quoted

III Offshore & Onshore Hi-Tech 2 2 Two Quoted

(3) Bidder's Category (Domestic/Foreign) with reference to Clause on GST

(4) Fixed Establishment or Permanent Address in India (of Foreign Bidders with reference to BEC Clause on GST)

(5) Rate of GST included in the quoted rates with reference to BEC Clause on GST. Item wise GST to be quoted against each service

(6) Name and address of Indian Agent, if any

(7) % Indian Agent commission (IAC), if any included in the rates quoted by Foreign bidder.

Note: Bidder to fill the quoted rates in various sheets of priceformat (Yellow cells) upto 2 decimal only.

Bidders to fill prices only in this price format (MS Excel sheet) uploaded in e-portal and upload same excel sheet without making any other changes in MS Excel format only. Price bids submitted in pdf or any other format will not be given cognizance.

Signature of Bidder:

Name of Signatory:

23 Twenty three

1 The bidder must indicate the currency of quotation.

2 Value declared for LIH purpose must be given as per the relevant Unit of Measurement indicated/provided at different places in the Price Format. SET (ST) means two tools i.e., one equipment/tool with an identical backup.

3 If any of the group is not to be quoted the corresponding cell in the Price Format Cover Page shall be clearly marked 'Not Quoted' from the drop down menu.

4 Price shall be quoted only as per the Price Format given in the tender document. Price for all essential tools required for a group must be quoted. Exclusion of any tools, save advanced tools, required for a group shall lead to rejection of offer. No separate charges shall be applicable for accessories of units / tools other than those specified in this Price Format.

5. Operating and Standby day rates:

5.1 Operating and Standby Rates shall be paid pro-rata to the nearest hour.

5.2 Operating and Standby day rates of Surface Recording System (LWD Unit) include corresponding charges of dedicated accessories associated with it. Day rates indicated above will be inclusive of personnel charges, equipment/ tool charges and any other services, spares and consumables as may be required to complete the job. Operating day rate includes depth charges, survey charges, high angle charges, high-resolution charges, engineer/specialist charges and all other charges for carrying out operations as specified in the Contract. No separate charges for the crew is payable.

5.3 Above rate will be payable on the basis of actual services rendered. The number of days indicated in Work Load sheets is for evaluation purpose only. Payment shall be made on the basis of actual number of operating/standby days / occasions.

5.4 Limits on Standby/Operating Day Rates:

5.4.1 Quoted Operating Day Rates / Standby Day Rates for the Surface Recording System should not exceed 30% of the sum of the of corresponding operating / standby day rates of one set each of the following tools

(a) 8-1/2” tools:

LDGRI8 Directional, GR & Resistivity (Induction type)

LADN8 Neutron & Azimuthal Density with Imaging & Caliper

LJX8 Jar & X-Overs

LSDMM8 Steerable Downhole Mud Motors along with Stabilizer & Accessories

LDGRI6 Directional, GR & Resistivity (Induction type)

LADN6 Neutron & Azimuthal Density with Imaging & Caliper

LJX6 Jar & X-Overs

LSDMM6 Steerable Downhole Mud Motors along with Stabilizer & Accessories

5.5.2 Quoted Standby Day Rate of a unit/tool shall not exceed 50% of the corresponding Operating Day Rate of the same unit / tool and shall not be lower than 30% of the corresponding Operating Day Rate of the same unit/tool.

6. Mobilization / De-mobilization Charges:

6.1 Limit on Mobilization Charges of unit: Quoted mobilization charges for LWD Unit shall not exceed the lowest of 3 days’ standby day rate of unit. Demobilization charges of the unit should not exceed the quoted mobilization charges.

6.2 Limit on Mobilization Charges of tool: Quoted mobilization charges for tool shall not exceed the lowest of 15 days’ standby day rate of the same tool. Demobilization charges of the tool should not exceed the quoted mobilization charges.

6.3 100% of mobilization charges of units and tools shall be taken into evaluation (for units/tools to be imported) except for short duration and advanced services as shown in the evaluation sheets. 450% of quoted mobilization charges shall be taken into evaluation for short duration and advanced services as shown in the evaluation sheets. However, for the short term tools available in India, if a bidder confirms in its price bid that these tools shall be made available throughout the contract period in India then mobilization charges for such tools shall not be taken into evaluation (the same is in-built in price evaluation sheet) and also no mobilization charges shall be payable for such tools.

6.4 15% of de-mobilization charges of units and tools shall be taken into evaluation except for short duration and Specialised services as shown in the evaluation sheets. 450% of quoted de-mobilization charges shall be taken into evaluation for short duration and Specialised services as shown in the workload / evaluation sheets.

6.5 No mobilization charges shall be payable for the unit(s)/tool(s) available in India( it is embeded in evaluation sheets). No mob charges shall be payable for units/tools re-mobilized if these units/tools are available in India.

6.6 For tools and services ‘Not Applicable’ with respect to the quoted Group, the corresponding cell(s) should be marked ‘NA’.

6.7 If part(s) of a unit or tool is required to be demobilized, in the event of tool damage, de-mobilization charges prorated for the part(s) shall be payable on the basis of value declared for LIH (If available for parts) or on the basis of FOB, where separate FOB is available for part(s).

7. Customs/Concessional duty: In case of items quoted against this tender are available in India which were imported in the name of ONGC against previous contract(s), it is the responsibility of the CONTRACTOR to get the items transferred in the name of the CONTRACTOR and arrange Customs clearance for their overstay for the proposed contract. The bidders would need to confirm and give an undertaking that all the equipment & tools for deployment against the proposed Contract would be imported on Re-export basis. All required Custom formalities (filing of IGM, identification on 100% examination of goods and as per latest EXIM Policy on submission of re-export bond etc.) would be complied with for imports under re-export basis and the bidder would be responsible for having complied with all Custom formalities.

8 For items required on as and when required basis (marked 'S' in the evaluation sheets), evaluation of mob charges shall be made irrespective of availability of such items in India. However, if a bidder confirms that such items shall be made available in India for the entire duration of contract including that for initial mobilization without any additional charges, then MOB CHARGES for such items will not be taken into evaluation. The list of such items for short term use must be indicated wise in their bid.

9 (i).The Quoted price of LDGRL12 should not be more then the Quoted price of LDGRI12.

10 Other Conditions:

11 For GST refer relevant Clauses in GCC/SCC/ITB/BEC.

12 Quantity of units/tools along with UM must be carefully filled up in the relevant sheets as per the formats.

13 Charges for pre-test/dry test for FPWD tools shall not be paid separately and should be built in the quoted rates irrespective of the no. of pre-test / dry tests

14 Due care and caution must be exercised while quoting rates so that the bids are compliant with various stipulations, conditions and limits set out in the tender. If a bidder has confirmed compliance of various stipulation /limit/ condition(s) set out in the tender in the techno-commercial bid but the stipulation/condition/limit is not satisfied in the price bid, the bid will be evaluated and ranked restricting the charges/amounts upto the specified limit. Rates under the contract to be awarded shall also be restricted to the extent that the stipulation/condition/limit is/are satisfied without increasing any of the quoted rates.

WORKLOAD AND REQUIREMENT OF TOOLS IN DIFFERENT GROUPS

Sl Hole size Description of Unit/ tool ONGC Code UM Quantity of units/tools reqd. Group-I Group-II Group-III

Group-I Group-II Group-III Total OD SD OD SD OD SD

1 All sizes LWD Surface Unit LWDU NO 16 2 2 20 3715 7569 825 793 928 2458

2 All sizes Data transmission system LVSAT NO 16 2 2 20 3715 7569 825 793 928 2458

3 12 1/4" Tools for Hole size - 12 1/4"

3.1 12 1/4" Directional, GR, Resistivity (Induction type) LDGRI12 ST 12 2 2 16 1276 1928 75 113 150 227

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper LADN12 ST 8 2 2 12 1275 1964 75 116 150 231

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling LAPWD12 ST 8 2 2 12 1301 1907 77 112 153 224

3.4 12 1/4" Formation Pressure While Drilling LFPWD12 ST 2 2 1 5 161 1773 9 104 19 209

3.5 12 1/4" Sonic While Drilling LSWD12 ST 0 0 1 1 0 0 0 0 123 147

3.7 12 1/4" Rotary Steerable Drilling System LRSS12 ST 8 2 2 12 1234 2090 73 123 145 246

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM12 ST 7 1 1 9 158 435 9 26 19 51

3.9 12 1/4" Gyro While Drilling LGWD12 ST 3 1 1 5 51 57 3 3 6 7

4 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) LDGRI8 ST 12 2 2 16 1882 2628 111 155 221 309

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper LADN8 ST 11 2 2 15 2016 3208 119 189 237 377

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling LAPWD8 ST 9 2 2 13 2016 3209 119 189 237 378

4.4 8 1/2" Formation Pressure While Drilling LFPWD8 ST 4 2 1 7 650 1894 38 111 76 223

4.5 8 1/2" FormationSampleWhile Drilling LFSWD8 ST 0 0 2 2 0 0 0 0 14 54

4.6 8 1/2" Sonic While Drilling LSWD8 ST 0 0 1 1 0 0 0 0 321 313

4.7 8 1/2" Nulcear Magnetic Resonance LNMRL8 ST 1 0 1 2 96 383 0 0 84 96

4.8 8 1/2" Directional Bed Boundary Imaging LDBBI8 ST 0 0 2 2 0 0 0 0 12 27

4.10 8 1/2" Rotary Steerable Drilling System LRSS8 ST 10 2 2 14 1875 3169 110 186 221 373

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8 ST 6 1 1 8 377 874 22 51 44 103

5 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) LDGRI8H ST 0 2 0 2 0 0 558 276 0 0

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN8H ST 0 2 0 2 0 0 558 276 0 0

5.3 8 1/2" HPHT Formation Pressure While Drilling LFPWD8H ST 0 1 0 1 0 0 8 24 0 0

5.4 8 1/2" HPHT Sonic while Drilling LSWD8H ST 0 1 0 1 0 0 12 27 0 0

5.5 8 1/2" HPHT Rotary Steerable Drilling System LRSS8H ST 0 2 0 2 0 0 528 216 0 0

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8H ST 0 2 0 2 0 0 16 64 0 0

6 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) LDGRI6 ST 5 2 2 9 348 908 20 53 41 107

6.2 6" High Resolution Resistivity Imaging (Latero type) LHRRIL6 ST 0 0 2 2 0 0 0 0 355 792

6.3 6" Neutron,Azimuthal Density with imaging & Caliper LADN6 ST 5 2 2 9 348 908 20 53 41 107

6.4 6" Annulus Pressure and Annulus Temperature While Drilling LAPWD6 ST 4 2 2 8 348 908 20 53 41 107

6.5 6" Formation Pressure While Drilling LFPWD6 ST 3 1 1 5 181 447 11 26 21 53

6.6 6" Sonic While Drilling LSWD6 ST 0 0 1 1 0 0 0 0 5 14

6.7 6" Directional Bed Boundary Imaging LDBBI6 ST 4 1 1 6 55 108 3 6 6 13

6.8 6" Jars & Cross overs LJX6 ST 5 2 2 9 337 873 20 51 40 103

6.9 6" Rotary Steerable Drilling System (Standard) LRSS6 ST 5 1 2 8 337 873 20 51 40 103

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6 ST 4 1 1 6 63 91 4 5 7 11

7 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) LDGRI6H ST 0 2 0 2 0 0 48 72 0 0

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN6H ST 0 2 0 2 0 0 48 72 0 0

7.3 6" HPHT Rotary Steerable Drilling System LRSS6H ST 0 2 0 2 0 0 36 36 0 0

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6H ST 0 2 0 2 0 0 12 36 0 0

8 Other Services applicable for any hole size

8.1 Any size Well placement Service(High angle & horizontal wells) LWPS AU 1 1 1 3 10 0 1 0 1 0

8.2 Any size Horizontal Well Interpretation Service LHWIS AU 1 1 1 3 1 0 1 0 1 0

9 Advanced Services

9.1 12 1/4" Directional, GR, Resistivity (Latero type) LDGRL12 ST 0 0 2 2 0 0 0 0 210 722

9.2 12 1/4" Seismic Profiling While Drilling LSPWD12 ST 0 0 2 2 0 0 0 0 40 48

9.3 8 1/2" Ultra-Sonic Borehole Imager LUBIWD8 ST 0 0 2 2 0 0 0 0 153 286

9.4 8 1/2" Seismic Profiling While Drilling LSPWD8 ST 0 0 2 2 0 0 0 0 84 114

9.5 8 1/2" Look Ahead Deep Resistivity while Drilling LADRWD8 ST 0 0 2 2 0 0 0 0 186 520

9.6 6" Nuclear Magnetic Resosnace LNMRL6 ST 0 0 2 2 0 0 0 0 246 440

OD Operating Days

SD Standby Days

HPHT High pressure high temperature

CURRENCY: USD Annexure-IIIE

(A) PRICE FORMAT FOR ESSENTAIL EQUIPMENTS Bidder to fill yellow cells

Sl Hole size Description of Unit/ tool Appl. Group ONGC Code UM Operating Day Rate exclusive of GST Standby Day Rate exclusive of GST Mob Chg per Occasion per UM exclusive of GST Demob Charges per Occ per UM exclusive of GST Value per UM declared for LIH purpose GST% Operating Day Rate (including GST) Standby Day Rate (including GST) Mob Chgerges per Occasion per UM (including GST) Demob Charges per Occasion per UM (including GST) Value per UM declared for LIH purpose SDR/ODR MOB/SDR DEMOB/MOB

1.0 All sizes LWD Surface Unit I II III LWDU NO 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

2.0 All sizes Data transmission system I II III LVSAT NO 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.0 12 1/4" Tools for Hole size - 12 1/4"

3.1 12 1/4" Directional, GR, Resistivity (Induction type) I II III LDGRI12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper I II III LADN12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling I II III LAPWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.4 12 1/4" Formation Pressure While Drilling I II III LFPWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.5 12 1/4" Sonic While Drilling III LSWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.6 12 1/4" Jars & Cross overs I II III LJX12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.7 12 1/4" Rotary Steerable Drilling System I II III LRSS12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories I II III LSDMM12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

3.9 12 1/4" Gyro While Drilling I II III LGWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) I II III LDGRI8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper I II III LADN8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling I II III LAPWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.4 8 1/2" Formation Pressure While Drilling I II III LFPWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.5 8 1/2" FormationSampleWhile Drilling III LFSWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.6 8 1/2" Sonic While Drilling III LSWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.7 8 1/2" Nulcear Magnetic Resonance I III LNMRL8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.8 8 1/2" Directional Bed Boundary Imaging III LDBBI8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.9 8 1/2" Jars & Cross overs I II III LJX8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.10 8 1/2" Rotary Steerable Drilling System I II III LRSS8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories I II III LSDMM8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) II LDGRI8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper II LADN8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.3 8 1/2" HPHT Formation Pressure While Drilling II LFPWD8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.4 8 1/2" HPHT Sonic while Drilling II LSWD8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.5 8 1/2" HPHT Rotary Steerable Drilling System II LRSS8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories II LSDMM8H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.0 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) I II III LDGRI6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.2 6" High Resolution Resistivity Imaging (Latero type) III LHRRIL6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.3 6" Neutron,Azimuthal Density with imaging & Caliper I II III LADN6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.4 6" Annulus Pressure and Annulus Temperature While Drilling I II III LAPWD6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.5 6" Formation Pressure While Drilling I II III LFPWD6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.6 6" Sonic While Drilling III LSWD6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.7 6" Directional Bed Boundary Imaging I II III LDBBI6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.8 6" Jars & Cross overs I II III LJX6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.9 6" Rotary Steerable Drilling System (Standard) I II III LRSS6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories I II III LSDMM6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) II LDGRI6H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper II LADN6H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

7.3 6" HPHT Rotary Steerable Drilling System II LRSS6H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories II LSDMM6H ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

8.0 Other Services applicable for any hole size (* Rate under ODR is the rate per AU)

8.1 Any size Well placement Service(High angle & horizontal wells) I II III LWPS AU 0.0

8.2 Any size Horizontal Well Interpretation Service I II III LHWIS AU 0.0

9.0 Advanced Services

9.1 12 1/4" Directional, GR, Resistivity (latero type) III LDGRL12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.2 12 1/4" Seismic Profiling While Drilling III LSPWD12 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.3 8 1/2" Ultra-Sonic Borehole Imager III LUBIWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.4 8 1/2" Seismic Profiling While Drilling III LSPWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.5 8 1/2" Look Ahead Deep Resistivity while Drilling III LADRWD8 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

9.6 6" Nuclear Magnetic Resosnace III LNMRL6 ST 0.0 0.0 0.0 0.0 0.0 #DIV/0! #DIV/0! #DIV/0!

Conditions LDGRL12 LSPWD12 UBIWD8 LSPWD8 LADRWD8 LNMRL6

1 Unit Operating Day rate: 0.00

Sum of Operating Day rate of specified tools : 0.00

Ratio (should not exceed 0.30): #DIV/0!

2 Unit Standby Day rate : 0.00

Sum of Standby Day rate of specified tools: 0.00

Ratio (should not exceed 0.30): #DIV/0!

3 Ratio (SDR/ODR) shall not exceed 0.50 and shall not be lower than 0.30 (Complied: Y; Not Complied: N) Y #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!

4 Mob Charges of unit should not exceed 3 days' unit SDR (Complied: Y; Not Complied: N) Y

5 De-mob Charges of unit should not exceed the Mob Charges (Complied: Y; Not Complied: N) Y

6 Mob Charges of tools should not exceed 15 days' SDR of tool (Complied: Y; Not Complied: N) Y #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!

7 De-mob Charges of tool should not exceed the Mob Charges (Complied: Y; Not Complied: N) Y Y Y Y Y Y Y

ODR SDR Mob Chg per Occasion per UM Demob Charges per Occ per UM

Rates of LDGRL12 should not be greater than rates of LDGRI12 OK OK OK OK

LIH Value Factor to be considered for evaluation Annexure-IIIE

Total max qnty in group 16 Bidder to fill yellow cells Annexure-IIIE

Qty Quoted 16 M8 E8

Price Format Sheet: Group-I Quoted 16 16

Sl ONGC Code UM Type of Service Applicable Qty. of Unit / Tool Qty. of unit/tool available in India, initially Qty. of unit/tool for the short period services that will be made available in India for entire duration of the contract Operating Charges Standby Charges Mobilization Charges Demobilization Charges LIH Value Factor to be considered for evaluation Estimated tool value considered for evaluation (E) Eval. Price without tool value

Operating Days ODR Total(B) Standby Days SDR Total(C) Qty. to be imported initially Mob charges per UM per occ Total Mob Chg(A) Demob Ch per occ per UM Total demob charges (D)

3.0 12 1/4" Tools for Hole size - 12 1/4"

3.5 LSWD12 ST NA 0

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.5 LFSWD8 ST NA 0

4.6 LSWD8 ST NA 0

4.8 LDBBI8 ST NA 0

5.1 LDGRI8H ST NA 0

5.2 LADN8H ST NA 0

5.3 LFPWD8H ST NA 0

5.4 LSWD8H ST NA 0

5.5 LRSS8H ST NA 0

5.6 LSDMM8H ST NA 0

6.2 LHRRIL6 ST NA 0

6.6 LSWD6 ST NA 0

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 LDGRI6H ST NA 0

7.2 LADN6H ST NA 0

7.3 LRSS6H ST NA 0

7.4 LSDMM6H ST NA 0

8.0 *Other Services applicable for any hole size

Total-Essential 0 0 #DIV/0! #DIV/0!

* Rate under ODR for other services is the rate per AU Total Evaluated Price - Essential Items / Services without LIH value factor #DIV/0!

Total estimated price - Essential Items / Services Per unit with out LIH Factor #DIV/0!

Total Evaluated Price - Essential Items / Services with LIH value factor #DIV/0!

Total Evaluated price - Essential Items / Services Per unit with LIH Factor #DIV/0!

Total max qnty in segment 2 Bidder to fill yellow cells

Qty Quoted 2 Annexure-IIIE …… Q8 E8

Price format Sheet: Group II Quoted 2 2

Sl ONGC Code UM Type of Service Applicable Qty. of Unit / Tool Qty. of unit/tool available in India, initially Qty. of unit/tool for the short period services that will be made available in India for entire duration of the contract Operating Charges Standby Charges Mobilization Charges Demobilization Charges Estimated tool value considered for evaluation (E) Estimated tool value considered for evaluation Eval. Price without tool value

WL-Operating Days ODR Total(B) WL-Stand Days SDR Total(C) Qty. to be imported initially Mob charges per UM per occ Total Mob Chg(A) Demob Ch per occ per UM Total demob charges (D)

3.0 12 1/4" Tools for Hole size - 12 1/4"

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.5 LFSWD8 ST NA 0

4.6 LSWD8 ST NA 0

4.7 LNMRL8 ST NA 0

4.8 LDBBI8 ST NA 0

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

6.0 6" Tools for Hole size - 6"

6.6 LSWD6 ST NA 0

7.0 6" HPHT Tools for Hole size - 6"-HPHT

8.0 * Other Services applicable for any hole size

8.1* LWPS AU NA 1 1 0 0 0

8.2* LHWIS AU NA 1 1 0 0 0

0 0 #DIV/0! #DIV/0! #DIV/0!

* Rate under ODR for other services is the rate per AU Total Evaluated Price - Essential Items / Services without LIH value factor #DIV/0!

Total Evaluated Price - Essential Items / Services with LIH value factor #DIV/0!

Total max qnty in segment 2

Qty Quoted 2 Annexure-IIIE …… Q8 E8

Price format Sheet: Group III Quoted 20 20

Sl ONGC Code UM Type of Service Applicable Qty. of Unit / Tool Qty. of unit/tool available in India, initially Qty. of unit/tool for the short period services that will be made available in India for entire duration of the contract Operating Charges Standby Charges Mobilization Charges Demobilization Charges Estimated tool value considered for evaluation (E) Estimated tool value considered for evaluation Eval. Price without tool value

WL-Operating-Days ODR Total(B) WL-Stand Days SDR Total(C) Qty. to be imported initially Mob charges per UM per occ Total Mob Chg(A) Demob Ch per occ per UM Total demob charges (D)

3.0 12 1/4" Tools for Hole size - 12 1/4"

4.0 8 1/2" Tools for Hole size - 8 1/2"

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 LDGRI8H ST NA 0

5.2 LADN8H ST NA 0

5.3 LFPWD8H ST NA 0

5.4 LSWD8H ST NA 0

5.4 LRSS8H ST NA 0

5.5 LSDMM8H ST NA 0

6.0 6" Tools for Hole size - 6"

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 LDGRI6H ST NA 0

7.2 LADN6H ST NA 0

7.3 LRSS6H ST NA 0

7.4 LSDMM6H ST NA 0

8.0 * Other Services applicable for any hole size

8.1* LWPS AU NA 1 1 0 0 0

8.2* LHWIS AU NA 1 1 0 0 0

Total -Essentail 0 0 #DIV/0! #DIV/0! #DIV/0!

9.0 Advanced Services Evaluation Advanced Services Line Item wise with LIH value factor

* Rate under ODR for other services is the rate per AU Total Evaluated Price - Essential Items / Services without LIH value factor #DIV/0!

Total Evaluated Price - Essential Items / Services with LIH value factor #DIV/0!

Group-I Annexure-IIIE

Sl Description of Unit/ tool ONGC Code Distribution UM

3.0 12 1/4" Tools for Hole size - 12 1/4"

3.1 12 1/4" Directional, GR, Resistivity (Induction type) LDGRI12 12 1 1 2 3 4 4 5 6 7 7 8 9 9 10 11 12 ST

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper LADN12 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 ST

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling LAPWD12 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 ST

3.4 12 1/4" Formation Pressure While Drilling LFPWD12 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 ST

3.5 12 1/4" Sonic While Drilling LSWD12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

3.7 12 1/4" Rotary Steerable Drilling System LRSS12 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 ST

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM12 7 1 1 1 2 2 3 3 4 4 4 5 5 6 6 7 7 ST

3.9 12 1/4" Gyro While Drilling LGWD12 3 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 ST

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) LDGRI8 12 1 2 2 3 4 5 5 6 7 8 9 9 10 11 12 12 ST

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper LADN8 11 1 1 2 3 3 4 5 5 6 7 7 8 9 9 10 11 ST

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling LAPWD8 9 1 1 2 2 3 3 4 4 5 6 6 7 7 8 8 9 ST

4.4 8 1/2" Formation Pressure While Drilling LFPWD8 4 1 1 1 1 1 2 2 2 3 3 3 3 4 4 4 4 ST

4.5 8 1/2" FormationSampleWhile Drilling LFSWD8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

4.6 8 1/2" Sonic While Drilling LSWD8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

4.7 8 1/2" Nulcear Magnetic Resonance LNMRL8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ST

4.8 8 1/2" Directional Bed Boundary Imaging LDBBI8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

4.10 8 1/2" Rotary Steerable Drilling System LRSS8 10 1 1 2 2 3 4 4 5 6 6 7 7 8 9 9 10 ST

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8 6 1 1 1 2 2 2 3 3 4 4 4 5 5 5 6 6 ST

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) LDGRI8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.3 8 1/2" HPHT Formation Pressure While Drilling LFPWD8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.4 8 1/2" HPHT Sonic while Drilling LSWD8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.5 8 1/2" HPHT Rotary Steerable Drilling System LRSS8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

6.0 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) LDGRI6 5 1 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 ST

6.2 6" High Resolution Resistivity Imaging (Latero type) LHRRIL6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

6.3 6" Neutron,Azimuthal Density with imaging & Caliper LADN6 5 1 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 ST

6.4 6" Annulus Pressure and Annulus Temperature While Drilling LAPWD6 4 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 ST

6.5 6" Formation Pressure While Drilling LFPWD6 3 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 ST

6.6 6" Sonic While Drilling LSWD6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

6.7 6" Directional Bed Boundary Imaging LDBBI6 4 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 ST

6.9 6" Rotary Steerable Drilling System (Standard) LRSS6 5 1 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 ST

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6 4 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 ST

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) LDGRI6H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN6H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

7.3 6" HPHT Rotary Steerable Drilling System LRSS6H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ST

8.0 Other Services applicable for any hole size

8.1 Any size Well placement Service(High angle & horizontal wells) LWPS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AU

8.2 Any size Horizontal Well Interpretation Service LHWIS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AU

Group-II Annexure-IIIE

Sl Description of Unit/ tool ONGC Code Distribution UM

1.0 LWD Unit LWDU 2 1 2 NO

2.0 LVSAT LVSAT 2 1 2 NO

3.0 12 1/4" Tools for Hole size - 12 1/4"

3.1 12 1/4" Directional, GR, Resistivity (Induction type) LDGRI12 2 1 2 ST

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper LADN12 2 1 2 ST

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling LAPWD12 2 1 2 ST

3.4 12 1/4" Formation Pressure While Drilling LFPWD12 2 1 2 ST

3.5 12 1/4" Sonic While Drilling LSWD12 0 0 0 ST

3.6 12 1/4" Jars & Cross overs LJX12 2 1 2 ST

3.7 12 1/4" Rotary Steerable Drilling System LRSS12 2 1 2 ST

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM12 1 1 1 ST

3.9 12 1/4" Gyro While Drilling LGWD12 1 1 1 ST

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) LDGRI8 2 1 2 ST

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper LADN8 2 1 2 ST

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling LAPWD8 2 1 2 ST

4.4 8 1/2" Formation Pressure While Drilling LFPWD8 2 1 2 ST

4.5 8 1/2" FormationSampleWhile Drilling LFSWD8 0 0 0 ST

4.6 8 1/2" Sonic While Drilling LSWD8 0 0 0 ST

4.7 8 1/2" Nulcear Magnetic Resonance LNMRL8 0 0 0 ST

4.8 8 1/2" Directional Bed Boundary Imaging LDBBI8 0 0 0 ST

4.9 8 1/2" Jars & Cross overs LJX8 2 1 2 ST

4.10 8 1/2" Rotary Steerable Drilling System LRSS8 2 1 2 ST

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8 1 1 1 ST

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) LDGRI8H 2 1 2 ST

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN8H 2 1 2 ST

5.3 8 1/2" HPHT Formation Pressure While Drilling LFPWD8H 1 1 1 ST

5.4 8 1/2" HPHT Sonic while Drilling LSWD8H 1 1 1 ST

5.5 8 1/2" HPHT Rotary Steerable Drilling System LRSS8H 2 1 2 ST

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8H 2 1 2 ST

6.0 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) LDGRI6 2 1 2 ST

6.2 6" High Resolution Resistivity Imaging (Latero type) LHRRIL6 0 0 0 ST

6.3 6" Neutron,Azimuthal Density with imaging & Caliper LADN6 2 1 2 ST

6.4 6" Annulus Pressure and Annulus Temperature While Drilling LAPWD6 2 1 2 ST

6.5 6" Formation Pressure While Drilling LFPWD6 1 1 1 ST

6.6 6" Sonic While Drilling LSWD6 0 0 0 ST

6.7 6" Directional Bed Boundary Imaging LDBBI6 1 1 1 ST

6.8 6" Jars & Cross overs LJX6 2 1 2 ST

6.9 6" Rotary Steerable Drilling System (Standard) LRSS6 1 1 1 ST

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6 1 1 1 ST

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) LDGRI6H 2 1 2 ST

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN6H 2 1 2 ST

7.3 6" HPHT Rotary Steerable Drilling System LRSS6H 2 1 2 ST

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6H 2 1 2 ST

8.0 Other Services applicable for any hole size

8.1 Any size Well placement Service(High angle & horizontal wells) LWPS 1 1 1 AU

8.2 Any size Horizontal Well Interpretation Service LHWIS 1 1 1 AU

Group-III Annexure-IIIE

Sl Description of Unit/ tool ONGC Code Distribution UM

1.0 LWD Unit LWDU 2 1 2 NO

2.0 LVSAT LVSAT 2 1 2 NO

3.0 12 1/4" Tools for Hole size - 12 1/4" No. of tools

3.1 12 1/4" Directional, GR, Resistivity (Induction type) LDGRI12 2 1 2 ST

3.2 12 1/4" Neutron,Azimuthal Density with imaging & Caliper LADN12 2 1 2 ST

3.3 12 1/4" Annulus Pressure and Annulus Temperature While Drilling LAPWD12 2 1 2 ST

3.4 12 1/4" Formation Pressure While Drilling LFPWD12 1 1 1 ST

3.5 12 1/4" Sonic While Drilling LSWD12 1 1 1 ST

3.6 12 1/4" Jars & Cross overs LJX12 2 1 2 ST

3.7 12 1/4" Rotary Steerable Drilling System LRSS12 2 1 2 ST

3.8 12 1/4" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM12 1 1 1 ST

3.9 12 1/4" Gyro While Drilling LGWD12 1 1 1 ST

4.0 8 1/2" Tools for Hole size - 8 1/2"

4.1 8 1/2" Directional, GR, Resistivity (Induction type) LDGRI8 2 1 2 ST

4.2 8 1/2" Neutron,Azimuthal Density with imaging & Caliper LADN8 2 1 2 ST

4.3 8 1/2" Annulus Pressure and Annulus Temperature While Drilling LAPWD8 2 1 2 ST

4.4 8 1/2" Formation Pressure While Drilling LFPWD8 1 1 1 ST

4.5 8 1/2" FormationSampleWhile Drilling LFSWD8 2 1 2 ST

4.6 8 1/2" Sonic While Drilling LSWD8 1 1 1 ST

4.7 8 1/2" Nulcear Magnetic Resonance LNMRL8 1 1 1 ST

4.8 8 1/2" Directional Bed Boundary Imaging LDBBI8 2 1 2 ST

4.9 8 1/2" Jars & Cross overs LJX8 2 1 2 ST

4.10 8 1/2" Rotary Steerable Drilling System LRSS8 2 1 2 ST

4.11 8 1/2" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8 1 1 1 ST

5.0 8 1/2" HPHT Tools for Hole size - 8 1/2"-HPHT

5.1 8 1/2" HPHT Directional, GR, Resistivity (Induction type) LDGRI8H 0 0 0 ST

5.2 8 1/2" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN8H 0 0 0 ST

5.3 8 1/2" HPHT Formation Pressure While Drilling LFPWD8H 0 0 0 ST

5.4 8 1/2" HPHT Sonic while Drilling LSWD8H 0 0 0 ST

5.5 8 1/2" HPHT Rotary Steerable Drilling System LRSS8H 0 0 0 ST

5.6 8 1/2" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM8H 0 0 0 ST

6.0 6" Tools for Hole size - 6"

6.1 6" Directional, GR, Resistivity (Induction type) LDGRI6 2 1 2 ST

6.2 6" High Resolution Resistivity Imaging (Latero type) LHRRIL6 2 1 2 ST

6.3 6" Neutron,Azimuthal Density with imaging & Caliper LADN6 2 1 2 ST

6.4 6" Annulus Pressure and Annulus Temperature While Drilling LAPWD6 2 1 2 ST

6.5 6" Formation Pressure While Drilling LFPWD6 1 1 1 ST

6.6 6" Sonic While Drilling LSWD6 1 1 1 ST

6.7 6" Directional Bed Boundary Imaging LDBBI6 1 1 1 ST

6.8 6" Jars & Cross overs LJX6 2 1 2 ST

6.9 6" Rotary Steerable Drilling System (Standard) LRSS6 2 1 2 ST

6.10 6" Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6 1 1 1 ST

7.0 6" HPHT Tools for Hole size - 6"-HPHT

7.1 6" HPHT Directional, GR, Resistivity (Induction type) LDGRI6H 0 0 0 ST

7.2 6" HPHT Neutron,Azimuthal Density with imaging & Caliper LADN6H 0 0 0 ST

7.3 6" HPHT Rotary Steerable Drilling System LRSS6H 0 0 0 ST

7.4 6" HPHT Steerable Down hole Mud Motors along with stabiliser & accessories LSDMM6H 0 0 0 ST

8.0 Other Services applicable for any hole size

8.1 Any size Well placement Service(High angle & horizontal wells) LWPS 1 1 1 AU

8.2 Any size Horizontal Well Interpretation Service LHWIS 1 1 1 AU

9.0 Advanced Services

9.1 12 1/4" Directional, GR, Resistivity (Latero type) LDGRL12 2 1 2 ST

9.2 12 1/4" Seismic Profiling While Drilling LSPWD12 2 1 2 ST

9.3 8 1/2" Ultra-Sonic Borehole Imager LUBIWD8 2 1 2 ST

9.4 8 1/2" Seismic Profiling While Drilling LSPWD8 2 1 2 ST

9.5 8 1/2" Look Ahead Deep Resistivity while Drilling LADRWD8 2 1 2 ST

9.6 6" Nuclear Magnetic Resosnace LNMRL6 2 1 2 ST

LWD Surface Unit I II III IV LWDU

Data transmission system I II III IV LVSAT

Tools for Hole size - 12 1/4"

Directional, GR, Resistivity (Induction type) I II III IV LDGRI12

Neutron,Azimuthal Density with imaging & Caliper I II III IV LADN12

Annulus Pressure and Annulus Temperature While Drilling I II III IV LAPWD12

Formation Pressure While Drilling I II III IV LFPWD12

Sonic While Drilling III IV LSWD12

Jars & Cross overs I II III IV LJX12

Rotary Steerable Drilling System I II III IV LRSS12

Steerable Down hole Mud Motors along with stabiliser & accessories I II III IV LSDMM12

Gyro While Drilling I II III IV LGWD12

Tools for Hole size - 8 1/2"

Directional, GR, Resistivity (Induction type) I II III IV LDGRI8

Neutron,Azimuthal Density with imaging & Caliper I II III IV LADN8

Annulus Pressure and Annulus Temperature While Drilling I II III IV LAPWD8

Formation Pressure While Drilling I II III IV LFPWD8

FormationSampleWhile Drilling III IV LFSWD8

Sonic While Drilling III IV LSWD8

Nulcear Magnetic Resonance I III IV LNMRL8

Directional Bed Boundary Imaging III IV LDBBI8

Jars & Cross overs I II III IV LJX8

Rotary Steerable Drilling System I II III IV LRSS8

Steerable Down hole Mud Motors along with stabiliser & accessories I II III IV LSDMM8

Tools for Hole size - 8 1/2"-HPHT

Directional, GR, Resistivity (Induction type) II IV LDGRI8H

Neutron,Azimuthal Density with imaging & Caliper II IV LADN8H

Formation Pressure While Drilling II IV LFPWD8H

Sonic while Drilling II IV LSWD8H

Rotary Steerable Drilling System II IV LRSS8H

Steerable Down hole Mud Motors along with stabiliser & accessories II IV LSDMM8H

Tools for Hole size - 6"

Directional, GR, Resistivity (Induction type) I II III IV LDGRI6

High Resolution Resistivity Imaging (Latero type) III IV LHRRIL6

Neutron,Azimuthal Density with imaging & Caliper I II III IV LADN6

Annulus Pressure and Annulus Temperature While Drilling I II III IV LAPWD6

Formation Pressure While Drilling I II III IV LFPWD6

Sonic While Drilling III IV LSWD6

Directional Bed Boundary Imaging I II III IV LDBBI6

Jars & Cross overs I II III IV LJX6

Rotary Steerable Drilling System (Standard) I II III IV LRSS6

Steerable Down hole Mud Motors along with stabiliser & accessories I II III IV LSDMM6

Tools for Hole size - 6"-HPHT

Directional, GR, Resistivity (Induction type) II IV LDGRI6H

Neutron,Azimuthal Density with imaging & Caliper II IV LADN6H

Sonic while drilling #N/A LSWD6H

Rotary Steerable Drilling System II IV LRSS6H

Steerable Down hole Mud Motors along with stabiliser & accessories II IV LSDMM6H

Well placement Service(High angle & horizontal wells) I II LWPS

Horizontal Well Interpretation Service I II LHWIS

Advanced Services

Directional, GR, Resistivity (latero type) III IV LDGRL12

Directional, GR, Resistivity (latero type) #N/A LDGRL8

Seismic Profiling While Drilling III IV LSPWD12

Ultra-Sonic Borehole Imager III IV LUBIWD8

Seismic Profiling While Drilling III IV LSPWD8

Look Ahead Deep Resistivity while Drilling III IV LADRWD8

Nuclear Magnetic Resosnace III IV LNMRL6

Major Breakup details of LIH Value per UM declared by Bidder for each equipment

Note: (i) Total value of Break-up of Major items which can be LIH should be less than or equal to LIH value declared per UM in Price_Form

(ii) Bidder can addup rows as per requirement

Sl.No Unit/Tool/Equipment LIH Value declared per UM in Price_form Break-up of Major Items which can be LIH