JED 139/2025-26

11 KV HT Line

ACSR Conductor 6/1/3.35 mm sq. (Prov. Byh HPSEBL)

ACSR 6/1/4.72 mm sq.(Dismantalled) (Prov. Byh HPSEBL)

Steel Tubular Poles 11 Mtr. W/L 300Kg (Prov. Byh HPSEBL)

Muffs with concerete filling (Prov. Byh HPSEBL)

Cross Arm: [Channel Iron (100x50x6 mm), Length: 2340 mm i/c tolerance of 100 mm either side) x5 structure

11kv Knee Bracing set (50X50x6) mm, Length :750 mm x 2 No (Prov. Byh HPSEBL)

Angle Iron (75x75x6 mm), Length: 750 mm x 2 No

C.I. F.G. X-Arm (5000*100*50) mm

11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure

Discs insulator sets (Cleaves and Tong) Helically fromed fitting

G.O Switch 11 KV

Stay set complete in all respect (2No. / Single Pole , 4 No. / Double Pole Structures)

Stay Wire (7/3.15 m) (9.0 kg Per Stay Set) (Prov. Byh HPSEBL)

GI Wire 8 SWG for Guarding across the road (Prov. Byh HPSEBL)

Eye Hook for earth wire

Earth Reel

Pole Top Bracket [MSCI:100x50x6 m- 100 m]

Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro' structure: 2 No ]

Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro' structure: 2 No]

Danger Plate (250X200X1.6 m) (Prov. Byh HPSEBL)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mΦ or more (with flat and spring washers)]

Barbed Wire

Aluminium Paint

Red Oxide

MS Channel Iron: 75x40x6, Length : 2400 m for Road crossing

Shackle Insulator (16 kN) (Prov. Byh HPSEBL)

D-Iron (U- Clamps) (Prov. Byh HPSEBL)

Full Clamps

Erection of 11 Mtr. ST pole Single structure i.e. digging of pit, fixing of insulator, x-arms, K.B. set, Top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect.

Erection of Stay set HT i.e. digging of pit, fixing of stay road, filling of pit, nozzeling & tightning.

Erection of G.O. switch 400 Amp. Comp.

Sagging of Conductor 6/1/4.72 mm sq. i.e. laying, stringing and sagging & binding with insulator (Single wire per KM).

Sagging of Conductor 6/1/3.35 mm sq. i.e. laying, stringing and sagging & binding with insulator (Single wire per KM).

Re-Sagging of Conductor 6/1/3.35 mm sq. i.e. stringing and sagging & binding with insulator (Single wire per KM).

Dismantling Charges of 6/1/3.35 mm sq. (Single wire per KM).

Sagging of GI Wire i.e. laying, stringing and sagging & binding (Single wire per KM).

Transportation Charges & Mannual carriage of material 1 KM HT line considering average distance from road to site of work (0.150 Km)