SDSTPS

Earthwork excavation for pit by mechanical means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Laying P.C.C (1:4:8) using 40 mm HBG machine crushed metal for levelling coarse of foundations, including cost and conveyance of all materials (But excluding cost of cement which will be issued free of cost at SDSTPS stores including seignorage charges at site, labour charges, machine mixing charges, curing and all leads & lifts etc, complete for finished item of work as directed by the Engineer at site.

Cutting, bending and placing of HYSD/TMT bar of Fe550D reinforcement in foundation/pedestals complete as per drawings and technical specifications for Bars below 36 mm dia including cost and conveyance of all materials (But excluding cost of reinforcement steel, which will be issued free of cost at SDSTPS stores) like binding wire cost, labour charges for shifting, bending, placing & conveyance of free issued materials to the site with a lead of 1 Km etc complete for finished item of work as directed by the Enginer- In-Charge.

Supply and placing of the M20 Design mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials (But excluding cost of cement which will be issued free of cost at SDSTPS stores) like fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges, machine mixing, laying concrete, curing, hirecharges of centring and shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing and conveyance of free issued materials to the site with a lead of 1 Km, etc. complete for finished item of work.

Soiling with hard stone of 150-225mm including 25% of Metal of 40 to 80mm size as per APSS 106 and APSS 107 for packing and 20% gravel for filling interstices and compacting with 80-100KN Power Roller including hire charges of Power Roller ,watering etc,. Complete for finished item of work as per APSS 619.3 and APSS 619.4

Brick Masonry in CM (1:6) with fly ash cement Bricks of size 225X100X60mm with compressive strength not less than 50kg /sqcm, including cost and conveyance of all materials,labour charges,all leads etc complete for finished item of work as directed by engineer in charge. (But excluding cost of cement, which will be issued free of cost at SDSTPS stores).

External sponze Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4) 4mm thick with Dubara sponze finishing including cost and conveyance of all materials, labour, scaffolding, curing,all leads and lifts etc complete for finished item of work as directed by the Engineer in charge.(But excluding cost of cement, which will be issued free of cost at SDSTPS stores).