Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.7 LAccepted-AOC 164 HIRANI NAGAR OPP SIDDHI VINAYAK TEMPLE MADHAPAR KUTCH 370 020 | KACHCHH | GUJARAT | 370020 | L1 | Accepted-AOC L1 AND ACCEPTABLE | |
| 2 | L2₹15.2 L+₹1.1 L (8.04%)Rejected-AOC | L2 | Rejected-AOC NOT L1 | |
| 3 | L3₹16.1 L+₹2.0 L (14.2%)Rejected-AOC B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | L3 | Rejected-AOC NOT L1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Not enlisted in required category | |
| 5 | Rejected-Technical C O BHAGYODAY STORES BAZAR CHOWK NALIYA KUTCH 370 655 | KACHCHH | GUJARAT | 370655 | - | Rejected-Technical Not enlisted in required category |
Tender Value
₹14.5 L
EMD Value
₹29,000
Closing Date
19 Mar 2022, 6:00 pmClosed
CWE AHMEDABAD
CWE AHMEDABAD
REPAIRS/ REPLACEMENT OF HT OVERHEAD LINES, HT UG CABLES, SWITCHGEAR, CT/ PT AND OTHER ALLIED WORKS AT MIL STN BHUJ UNDER GE (A) BHUJ
2021_MES_477652_2
87047
Open Tender
Civil Works
Item Rate
180 days
BHUJ
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE ARMY BHUJ
₹29,000
6 May 2022
12 Feb 2022
21 Mar 2022
12 Feb 2022
19 Mar 2022
5 Mar 2022
Amount
Dismantling existing old unserviceable stay assembly complete. (demolition of concrete, etc. and excavation measured separately). Complete all as specified and as directed.
Dismantling existing HT pole of any size and transporting to MES store complete. Complete all as specified and as directed.
Dismantling insulators any type any size complete (and keeping in side shall be property of the contractor after credit recovered by the department). Complete all as specified and as directed.
Material and labour for Prestressed concrete pole ISI marked of 11.0 Metres long. 152 mm X 152 mm at top and 152 mm x 260 mm at bottom, class 9. Complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in soft/ loose soil. Complete all as specified and as directed.
Excavation in trenches exceeding 1.5 m wide and not exceeding 3.0 m deep for foundation for poles, and getting out in soft/ loose soil. Complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick. Complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point. Complete all as specified and as directed.
Material & Labour for PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) in foundation including form work and finishing the exposed surface of concrete even and smooth. Complete all as specified and as directed.
Material & Labour for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in stay foundation including form work and finishing the exposed surface of concrete even and smooth. Complete all as specified and as directed.
Material & Labour for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) in repairing of coping/ new coping of poles including form work and finishing the exposed surface of concrete even and smooth. Complete all as specified and as directed.
Supply & Fixing of Cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shirnk type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 Sqmm. Complete all as specified and as directed.
All as per item No 12 here in before, but of size 120 Sqmm to 185 sqmm. Complete all as specified and as directed.
Supply & Fixing of Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shirnk type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 Sqmm. Complete all as specified and as directed.
All as per item No 14 here in before, but of size 120 to 185 Sqmm 3 core. Complete all as specified and as directed.
Material and labour for Disc type insulator, grey porcelain insulator with overall dimensions 145 mm high and 255 mm dia suitable for 11000 volts grade. Complete all as specified and as directed.
Material & Labour for Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150 mm height, 150 mm dia for 11000 volts grade. Complete all as specified and as directed.
Material & Labour for Earthing complete with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm thick buried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5 m below ground level connected to galvanized iron strip 32 mm x 6.0 mm, not exceeding 7.5 metres, by means of bolts, nuts, check nuts and washers made out of Galvanised, 20 mm bore Galvanised watering pipe, PCC chamber with RCC cover, funnel with wire mesh, Galvanised protection pipe light grade ISI marked 40 mm etc all as shown on plate No. 3 of SSR Part-I 2009 including necessary test on completion. Complete all as specified and as directed.
Supply and fixing stay assembly complete with accessories as showing in electrical plate No.1 with 16 mm dia stay road (loop type insulator, stay strand, stay clamps, excavation and Plain Cement Concrete will be measured and paid separately on as required basis). Complete all as specified and as directed.
Material & Labour for Fuse Wire (Tinned Copper Wire) of not more than 18 SWG (dia 1.22 mm) for use in semi-enclosed fuses for not more than 65 Amps of current rating.
Material and labour for Framed work as in gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing with all locking arrangement. complete all as specified and as directed.
Supply and Fixing only chain link Mild Steel Galvanized fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire upto a height of 3 mtrs. Complete all as specified and as directed.
Material & Labour for Compound girders and stanchions, lattice girders, aerial masts, staging for fencing post and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Complete all as specified and as directed.
Material & Labour for servicing, inspection, cleaning of vacuum circuit breaker HT VCB 26.3 KA 250 MVA 630 Amp indoor switch gear make Alstom/ CG type : VR5 with motorizes operation mechanism 220 volts DC shunt trip/ close coils operation counter, handle for manual spring charging, relays, meters etc carefully, tightening cable connections, replacing worn out fastners, applying petrolium jelly to movable and fixed parts for its smooth functioning, submitting service report giving details of defects, if any, alongwith list of spares for rectification including replacing sparest and rectifying the defects. Complete all as specified and as directed. Note :- The entire servicing/ inspection shall be carried out by the rep of OEM or by his authorised service centre rep. Fixing charges for item No 25 to 38 catered hereinafter are deemed to be included in this item No 24. Genuine parts of OEM of VCB should be incorporated in work.
Supply only digital Ampere meter suitable for 11 KV VCB of capacity upto 100 Amps. Complete all as specified and as directed.
Supply only over current and earth fault Relay CGI14N suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only master trip relay suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only CT 100/50/5+5A suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only power pack, 230 V AC, 110 V DC with battery suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only spring charging motor, DC for 11 KV VCB. Complete all as specified and as directed.
Supply only under voltage & over voltage relay CGV24 suitable 24 V DC for 11 KV VCB. Complete all as specified and as directed.
Supply only Vacuum interrupter type 34599 suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only trivector meter secure suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only Demand controller relay secure suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only closing coil for CG VCB suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only tripping coil for CG VCB suitable for 11 KV VCB. Complete all as specified and as directed.
Supply only Indication lamp 20V-250V AC/DC suitable for 11 KV VCB. Complete all as specified and as directed.
Sai Ram Electricals and Refrigeration Works
Abhishek Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .