Annual Maintenance work for Emergency and Minor Repair works in Assets under Tirur Buildings section - (Maintenance Assets)

Work Name:GENERAL-Running Contract-2025-26-Various Assets in Tirur & Tanur LAC-Annual Maintenance work for Emergency and Minor Repair works in Assets under Tirur Buildings section - (Maintenance Assets)-General Civil Work

fing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.e22.14.3:Grading roof for water proofing treatment with:Cement mortar 1:4 ( 1 cement : 4 coarse sand )Œ22.23.1:Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqmŽ22.23.2:Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.:OD145704/2025-2026:. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.nOD145702/2025-2026:Providing and fixing 160mm UPVC square gutter pipe over GI clamp of same profile @ 1m c/c metreè50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completekg1
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood™15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and beloweach?21.4.1:Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness`9.117.1:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mmy9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by

獮漠⁦⹍⹓朠污慶楮敳⽤汰獡楴⁣牢捡敫獴漠⁦楳敺㜠砵㈲‰浭栠癡湩⁧慷汬琠楨正敮獳ㄠ〮洠湡⁤瑳楡汮獥⁳瑳敥捳敲獷‮桔⁥瑳汹獥漠⁦桴⁥桳瑵整⁲敲湩潦捲摥戠⁹湩敳瑲湩⁧慧癬湡獩摥䴠匮‮畴敢漠⁦楳敺㈠砰〲洠湡⁤‱浭⠠₱⸰‱浭 慷汬琠楨正敮獳‮桔⁥潬正爠楡慭敤甠⁰景✠❈猠捥楴湯‬⁡偵䍖栠汯潬⁷敳瑣潩景猠穩⁥〱砰㐲洠湡⁤′浭⠠₱⸰′浭 慷汬琠楨正敮獳昬硩摥琠桴⁥桳瑵整⁲瑳汹獥戠⁹敭湡⁳景瀠慬瑳捩术污慶楮敳⁤⹍⹓✠❕挠敬瑡⹳吠敨猠畨瑴牥映慲敭映汩敬⁤楷桴愠甠噐⁃畭瑬⵩档浡敢敲⁤楳杮敬瀠湡汥漠⁦楳敺渠瑯氠獥⁳桴湡㘠〲洠Ɑ栠癡湩⁧癯牥愠汬琠楨正敮獳漠⁦〲洠湡⁤‱浭⠠₱⸰‱浭 慷汬琠楨正敮獳‮桔⁥慰敮獬映汩敬⁤敶瑲捩污祬愠摮琠敩戠牡愠⁴睴汰捡獥戠⁹湩敳瑲湩⁧潨楲潺瑮污祬㘠洠慧癬湡獩摥䴠匮‮潲⁤湡⁤慦瑳湥摥眠瑩⁨畮獴愠摮眠獡敨獲‬潣灭敬整愠⁳数⁲慭畮慦瑣牵牥猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧 潆⁲⹗⹃愠摮戠瑡牨潯潤牯猠畨瑴牥⸩ˆ㄀⸸㐵㈮债潲楶楤杮愠摮映硩湩⁧呐呍戠扩挠捯景愠灰潲敶⁤畱污瑩⁹湡⁤潣潬牵ㄮ‵浭渠浯湩污戠牯ⱥㄠ㈲洠潬杮‬敷杩楨杮渠瑯氠獥⁳桴湡㤠‹浧콳
㜱ㄮㄮ债潲楶楤杮愠摮映硩湩⁧慷整⁲汣獯瑥猠畱瑡楴杮瀠湡⠠湉楤湡琠灹⁥⹗⹃瀠湡 楷桴ㄠ〰洠慓摮䌠獡⁴牉湯倠漠⁲⁓牴灡‬〱氠瑩整⁲潬⁷敬敶桷瑩⁥⹐⹖⹃汦獵楨杮挠獩整湲‬湩汣摵湩⁧汦獵⁨楰数‬慭畮污祬挠湯牴汯敬⁤敤楶散⠠慨摮敬氠癥牥 潣普牯業杮琠卉㨠㜠㌲ⰱ眠瑩⁨污楦瑴湩獧愠摮映硩畴敲⁳潣灭敬整‬湩汣摵湩⁧畣瑴湩⁧湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳湡⁤汦潯獲眠敨敲敶⁲敲畱物㩥桗瑩⁥楖牴潥獵挠楨慮传楲獳⁡慰瑴牥⹗⹃瀠湡漠⁦楳敺㔠〸㑸〴洠楷桴椠瑮来慲祴数映潯⁴敲瑳둳
㜱㈮ㄮ债潲楶楤杮愠摮映硩湩⁧桷瑩⁥楶牴潥獵挠楨慮瀠摥獥慴祴数眠瑡牥挠潬敳⁴䔨牵灯慥祴数圠䌮‮慰⥮眠瑩⁨敳瑡愠摮氠摩‬〱氠瑩敲氠睯氠癥汥眠楨整倠嘮䌮‮汦獵楨杮挠獩整湲‬湩汣摵湩⁧汦獵⁨楰数‬楷桴洠湡慵汬⁹潣瑮潲汬摥搠癥捩⁥栨湡汤⁥敬敶⥲‬潣普牯業杮琠卉㨠㜠㌲ⰱ眠瑩⁨污楦瑴湩獧愠摮映硩畴敲⁳潣灭敬整‬湩汣摵湩⁧畣瑴湩⁧湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳湡⁤汦潯獲眠敨敲敶⁲敲畱物摥场䌮‮慰楷桴䤠䥓洠牡敫⁤桷瑩⁥潳楬⁤汰獡楴⁣敳瑡愠摮氠摩ň㄀⸷⸷㨴牐癯摩湩⁧湡⁤楦楸杮眠獡⁨慢楳楷桴䌠䤮‮牢捡敫獴‬㔱洠⹃⹐戠慲獳瀠汩慬⁲慴獰‬㈳洠⹃⹐戠慲獳眠獡整漠⁦瑳湡慤摲瀠瑡整湲‬湩汣摵湩⁧慰湩楴杮漠⁦楦瑴湩獧愠摮戠慲正瑥ⱳ挠瑵楴

g and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap ª50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.noÉ50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.Ç17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White4
50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall]
50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2Ö50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2&
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on walliOD223551/2025-2026:Sludge removal from the existing septic tank including all labor and hire charges etc.•OD145701/2025-2026:Engaging man mazdoor for DLR Basis for helping roof repair ,Clearing and similar Works As per the Direction Of Engineer In charge ‘OD145700/2025-2026:Engaging Carpenter for DLR basis for Repairing Wooden cot,Table,Doors and Windows as per the direction of Engineer in charge.‘OD145703/2025-2026:Engaging Plumber for DLR basis for Repairing and Maintenance of Plumbing works etc as per the direction of Engineer in charge.ˆOD145705/2025-2026:Engaging Fitter for DLR basis for Structural steel work or similar etc, as per the direction of Engineer in charge.E14.75A:Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)Litre'
50.2.33.5:Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.—
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.4
50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall•50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbowš50.18.9.20.3:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow”50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete*
50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall 50.18.9.22.11:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling¡50.18.9.22.2:Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow™50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow”50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend™50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee