PEDDANAPALLI LIFT IRRIGATION SCHEME

Provision for O&M consumables like greese, oils, fuses, LT and HT insulators,TC and CC coils,contactors, Power contactor coils, silica gel, betnonite powder, switches, push buttons, gaskets, lighting equipment , transformer oil,gland rope,cable joints etc,. Silica Gel

Contactor Terminal points

415/230V AC contactors

Aux.Contactor NO/NC Elements

Under voltage trip

Water level controller WLC D1

Phase failure Relay ALV D2

Phase failure Relay VSP D2

18-25AOver load relay

Cleaning agents-etc.

Supply of DE Bearing for 30 KW Motor

Supply of NDE Bearing for 30KW Motor

415V Post top insulators

Petroleum Jelly

Supply of Nuts,Bolts,Lugs, PVC pipes, bends, junction box, ceiling ross, 12 module Switch board with switches, etc.,(2 x 30 KW Pump house)

Supply of 36/40 W VPIT Ballast.

Supply of 250W SV/MH copper ballast

Supply of 250W SV Lamps

Bentanite powder for earth pits(30 kgs bag)

Supply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp with integral circuit, terminal block, including connection etc. as required. a) Red/yellow/Green colour

Supply and fixing of Fire bucket stand fabricated by M.S. angles to install for four numbers of buckets as per local fire officers standards.

Supply of up to 32A HRC Fuse Links.

Supply of 45A to 63A HRC Fuse Links.

Supply of 2.50 Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable. Makes : As per list of recommended brands as category I

Supply of 6-32A,10KA SP MCB's

Supply of 40-63A,10KA TP MCB's

Supply of 6-32A,10KA TP MCB's

Supply of 40-63A,10KA SP MCB's

Cable root Indicators of size 152mm round / 102mm x 102mm /152mm x 152mmCable root Indicators of size 152mm round / 102mm x102mm /152mm x 152mm

Copper Plate / Strip / SWG wire No.8 / 10 / 14

Supply of new and tested transformer oil as per IS-335 - 1972 (per Ltr)

PVC /cotton tape Role ( 8 Mtrs)

Supply and Fixing of selector switch for voltmeter (4 position ) including making connection etc. as required Make: L&T /C&S/SALZER/HPL

Supply and Fixing of CT operated direct reading type Ammeter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc as required. Make: Conzerve/Elmeasure/ . Meco/HPL/L&T/Schneider/AE/Socomec;Analog type ( 96 mm x 96 mm ) Above 500A

Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors suitable for 11KV supply with necessary materials on existing cross arm

First Aid box 18"X12"X8"

11KV Hand gloves

GI Wire or strip

Testing of Transformer oil for dielectric breakdown strength

Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982

Shock instrution chart in English / Hindi / Telugu duly framed with front glass

Painting to transformer with 2 coats Zinchromate red oxide duly scraping existing paint followed by 2 coats of hammerton grey paint etc., complete. - upto 500KV

Supply and Fixing of thermal over load relay with built in single phase protection and having at least 1NO &1NC contacts, manual /auto reset facility including making connection testing etc. as required Make: Seimens/ABB/Schneider/L&T/C&S/HPL/Havells (a) upto 14A

Supply and Fixing of push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required Make:Seimens/ ABB/ Schneider/L&T/C&S/HPL- (a) Non-luminous type

Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warranty Including transportation, all taxes and all labour charges etc complete.

Supply and Fixing of energy analyser (multy functionenergy meter) with LCD/LED display capable ofminimum 20 numbers electrical parameters displaywith 1A/5A CT input for LV/ HV network, RS 485communication port etc. complete in all respect.etc.,complete.

Replacement the H T / L. T burntout winding coils of distribution transformer including rewinding, varnishing and vaccuming etc.,duly retaining the removed burnt winding coils by the Contractor / Firm- (a) for copper coils

Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : Crompton HS Plus / Havells ES Neo/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy Star) / G.M. (Air Wave Premium)

Rewinding of three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required.a)5 h.p

Copper winding wire

Service charges for Overhauling and testing of the Electro- Hydro-Mechanical equipment at the Pump House including required lubricants gaskets, gland rope varnish and alignment of shafts, terminal blocks,etc.,as per O&M manuals. Servicing, overhauling of 30 KW, 415V, Bharat Bijlee make LT motor including cleaning of stator, rotor by air and by CO2, application of anti tracking varnish for stator and rotor windings,and epoxy gel coat on end winding portion,heating,replacement of minior parts, testing of stator, rotor for IR, PI, winding resistance and replacement of DE, NDE side bearings with new bearings(Supplied by department if necessary), balancing the rotor and Re-assembling the motor including cost of all necessary parts required for the job etc., complete for servicing, overhauling and testing, commissioning of the motor for satisfactory running of the motor .Bearing housing repair DE & NDE side covers etc

Starter suitable for 40H.P Motor

General servicing of crane suitable for 40H.P Motor

Routine maintenance of earth pits, Weed removal treatment,Metal filling etc ,in outdoor substaion of 160KVA transformer.(2x40H.P motors)

Servicing, overhauling of 40 HP Pump including replacement of gland packing, wornout bearings, Bushes etc.,

Filtration of transformer oil as per ISS specifications filters to dielectric strength above 40KV ……. a) at site. (Per Ltr) excluding transportation

Carryout routine maintenance , servicing and testing of 630A to 1000A L.T.ACB by cleaning fixed contacts, moving contacts and arcchutes including servicing and putting the ACBin perfect working condition after detting all relay and ON, OFF mechanism etc done with only manufacturing companies.

Carryout routine maintenance , servicing of L.T. cubical panel board having approximately 15 to 22 Nos of switches cleaning with power brower and servicing the contacts,and tightning the connection of incoming and outgoing cables and clicking the operating mechanism for smooth functioning of switches and putting them in smooth working condition.

Routine maintenance of transformer in operation covering insulation resistance, oil break down strength, Reconditioning / replacement of silicazel, cleaning of transformer and topping upto oil level if required ( extra cost will be paid for oil )

Operators (ITI -Electrical)

Operators(ITI -Fitter)

Helpers (Electrical/Mechanical)

Provision towards Bailing out water (using 5 hp diesel pump) from Pump house in sumps for maintenance (i.e)removal of silt and debris (Vide Sl.No.26 of Page:44) Machinery hire charges-common SOR 2025-2026

Provision towards removal of sand showal/Silt in the Sump (Including silt in Delivery chamber) Vide: IRR -PMW-3-21, S.No.341, Pg.No.44 of AP Revised Standard Data: 2025-2026

Provision towards inspection charges of Electrical installation by the C.E.I and inspection of Pumping Scheme by the agency and/or company engineers and for obtaining fitness certificate and its allied charges .