PROVN OF OTM ACCN AT GANDHIDHAM MIL STN

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27(R)

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 32(R)

Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34(R)

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 38(R)

Lump sum price worked out by the contractor for "FENCING, GATE & DEVELOPMENT" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 46

Lump sum price worked out by the contractor for "SUMMER APPLIANCE" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 47

Lump sum price worked out by the contractor for "HOT WATER SUPPLY" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 48

Lump sum price worked out by the contractor for "LIGHTENING PROTECTION" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 49

Sch 'A' PART-XIV (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL ELECTRIFICATION S&F energy saving 9 Watt LED bulb input operating voltage range 100-270V AC, CCT-6500K, operating temprature -10 to 50 degree centigrade, PF more than 0.90, luminous flux equal/ greater than 460 lumens , CRI equal/ greater than 80, Base B22 all as specified and directed.

S&F decorative mirror type LED tube light fitting 1x10 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S&F decorative box type LED tube light fitting 1x20 watt with surge protection not less than 4 KVA, luminous efficiency more than 100 Lumen/Watt, minimum 50000 burning hours, CRI > 80 including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with three core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S&F decorative wall mounted light fitting made up of polycarbonate suitable for 9 watt LED bulb base B-22 single phase 240 v all as specified and directed.

S&F heavy duty, exhaust fans of 250 mm sweep suitable for SP 230/250 volts, 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including three core twisted flexible copper conductor cable of 1.0 sq. mm size cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed.

S&F heavy duty, exhaust fans of 300 mm sweep suitable for SP 230/250 volts, 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including three core twisted flexible copper conductor cable of 1.0 sq. mm size cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed.

S & F 12 watt LED porch light all as specified and directed.

S&F ceiling fans 1200mm sweep energy efficient five star rated incl down rods and connecting up with three core twisted flexible copper conductor cable of 1.0 sq. mm size cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed.

S&F MCCB Distribution board, concealed flush to wall for mounting MCCBs and MCBs , factory made, fabricated out of CRCA sheet not less than 1.20 mm thick fitted with DIN channel , neutral link ,DBs shall be semi glossy finished with epoxy polester based powder paint process to ensure smooth finish and protection against corrosion atmosphere, the DBs shall be double door type with hinged door with locking arrangement. the DBs shall be of same make as MCCBs, DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways specified . the DBs shall be IP 43 protection class sor the following:-

MCCB DB suitable for 100 Amp TPN 4 way

M&L for sub main wiring with Two runs of 4.0 Sqmm size main cable and one run of 4.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all concealed on wall/ceiling complete all as specified and as directed

M&L for sub main wiring with Two runs of 6.0 Sqmm size main cable and one run of 6.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all concealed on wall/ceiling complete all as specified and as directed

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 4 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 25 mm bore light grade , 1.2 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed.

Note for item No 26.00: (1) The LED lights shall have guarantee for 5 Years from date of completion of contract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.Cat No. LSTS-30-CDL of Crompton or techno commercial equivalent makes as per Appx 'C'.

M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

S&F T.V./Telephone Socket Outlet, including M.S. Box of size 100x100x65 mm with cover plate complete all as specified and directed

SEWAGE DISPOSAL M&L for on site hume pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete for 10 user cap all as shown in drawings.

M&L for construction of RCC Septic tank 50 users capacity designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-35 (Design mix) in walls, base slab, baffle walls and roof slab including beams etc. with manhole openings with cover, connection etc complete all as specified and shown on Drg No CEJZ/STR/25-G/2021 sheet 1R/2 to 2R/2.

M&L for seepage pit upto 10 users of size 2.5 m dia and 2.4 m effective depth / height with 30 cm thick stone masonry wall and stone rubble filling complete all as per Drg No CEJZ/TD/68/15 sheet 1/4 to 4/4 complete all as directed and specified.

M&L for seepage pit upto 50 users of size 5.0 m dia and 4.0 m effective depth/height with 30 cm thick stone masonry wall and stone rubble filling complete all as per Drg No CEJZ/TD/68/15 sheet 1/4 to 4/4 complete all as directed and specified.

EXTERNAL WATER SUPPLY Supply, laying, connecting, jointing and testing ductile iron pressure pipe of size 100 mm dia, ISI marked to IS-8329-2000 Reaffirmed Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, Class K-7 with socket and with cement mortar lining inside the metalic zinc coating with finishing layer of bituminious paint on outside the pipe without polythelene sleeves but including "push on joints" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality laid in tenches complete all as specified & directed.

Supply, laying, connecting, jointing and testing ductile iron pressure pipe of size 80 mm dia, ISI marked to IS-8329-2000 Reaffirmed Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, Class K-7 with socket and with cement mortar lining inside the metalic zinc coating with finishing layer of bituminious paint on outside the pipe without polythelene sleeves but including "push on joints" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality laid in tenches complete all as specified & directed.

Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 100 mm ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed.

Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 80 mm ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed.

Supplying, fixing and testing of DI pipe fittings for spigot socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing/ decreasing or double socket etc). Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs, for pipe complete all as specified & directed.

S&F cast iron air valves with double action air outlets, confirming to IS 14845 of size 100 mm bore and fixing up in cast iron water supply mains of size 100 mm dia complete all as specified and directed.

M&L for Construction of new PCC solid Masonary valve chamber of size 450 X 450 X 450 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 50 mm X 50 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

M&L for Construction of new PCC solid Masonary valve chamber of size 1000 X 800 X 1000 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 50 mm X 50 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, install, test and commisioning copper wound step down transformer, Level 3 ,outdoor type, including plinth PCC platform complete with stranded fittings, ONAN, Vector group DYN11, HT 11 KV, 3 phase, LT, 433 Volts 3 Phase, 4 wire all as per IS 1180 ( Part- I ) : 2014 and designed on minimum 5 star rating with EEL 03, consideration with off load tapings on primary side to vary secondary voltage +/- 5% with taping at every +/- 2.5% of capacity 100 KVA complete all as specified and including the following:-

(a) Three Nos porcelain bushings HT 11 KV with bushing rods, nuts and washers inside cable end box . (b) One cable box LV side consisting of 4 Nos porcelain with brass bushing rods, complete with nuts and washers with two nos cable gland of suitable size. (c) Oil conservator with filler type drain valve and oil level gauge. (d) Dehydrating breather with first fill of dehydrating agent. (e) Explosion vents. (f) Thermometer pocket on tank cover. (g) Rating plate and terminal marking plate. (h) The earthing terminal two Nos to tank to faciliate fixing of earth strip. (j) Oil filling hole with cap/plug with connection plate complete. (k) Lifting hook. (l) Oil level gauge and oil drain filter valve. (m) air relief valve plug. (n) Detachable rollers(4 Nos). (o) Initial filling to transformer oil.

Supply, install, testing and commissioning of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle iron frame & MS sheet of 3.15 mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 320 Amps 3 phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundatiion work and suitable cable glands for incoming and outgoing cables. (Location- Main Panel)

Supply,install, testing and commission of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle iron frame & MS sheet 3.15mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 250 Amps,3 Phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundation work and suitable cable glands for incoming and outgoing cables. (Location- FP 01)

Supply,install, testing and commission of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle iron frame & MS sheet 3.15mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 150 Amps,3 Phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundation work and suitable cable glands for incoming and outgoing cables. (Location- FP 02)

Supply,install, testing and commission of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle iron frame & MS sheet 3.15mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 150 Amps,3 Phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundation work and suitable cable glands for incoming and outgoing cables. (Location- FP 03)

Supply,install, testing and commission of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle iron frame & MS sheet 3.15mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 150 Amps,3 Phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundation work and suitable cable glands for incoming and outgoing cables. (Location- FP 04)

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of strata, PCC 1:3:6 type C1 in chamber, precast RCC cover 50 mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4 Kg/Sqm) with cast iron frame, funnel with wire mesh, 20 mm bore GI pipe medium grade watering pipe, lugs, 40 mm bore GI pipe medium grade protection pipe up to 7.5 m. NOTE:- Item includes the cost of earth lead and GI protection pipe up to 7.5 m. GI strip and protection pipe beyond 7.5 m shall be measured and paid for separately.

S&F mounting bracket made out of light grade GI tubing 32mm bore 1.5 M long & bend to shape including 02 Nos MS clamps Nut bolts, washers etc complete all as specified and directed.

S&F for circuit wiring from junction box to LED street light fitting alongwith earth wire of FR PVC insulated copper conductor of size 2x 1.5sqmm +1x 1.5sqmm earth wire with steel conduit suitable size, single core cable in surface as required.

S&F LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection complete all as specified and directed.

S&F Weather Proof PVC Junction Box made out of not less than 2 mm thick of size 250x200x100 mm (approx) complete with hinged door locking arrangement and consisting of 01 No panel mounted connector 4 pole 32 A - 01 No MCB SP 06 Amps 10 KA - 01 No incl 02 Nos Cable Glands suitable for inserting cable not less than 50 sqmm with 02 No 01 mm GI plate (150x50mm) having two holes as per the size of cable glands, fixed with cable gland for earth connectivity confirming to IP 65 complete including fixing on street light pole with MS Clamps, bolts, nuts and washers complete all as specified and directed.

M&L for cable route indicator shown "HT UG cables" painted in brown colour and root of cable with aero made of CI in suitable eleiptical shape and fixed in MS rod 12mm dia 70 cm long ( all word embosed) and embaded in PCC block of size 30 x 30 x 60cm in ground complete all as specified and directed.

Supplying, installation, commissioning and testing of company make Automatic power Factor Correction (APFC) Panel for 3 Phase, 415 V & 50 Hz system of capacity 50 KVAR in 6 steps (10 KVAR fix compensaton + 10 KVAR X 3 Nos + 5 KVAR X 2 Nos) complete with relays, capacitor banks for automatic operation to power factor above 0.95.

The panel should be complate with TP air break contacts of capacitor contacts of duly with suitable switch gear, MPP heavy duty shunt capacitor impregnatd, having rated voltage of 440 V type with internal electrical switch gear each element as per IS 13340-1993/IS 13341-1992, IEC 60831 Part 1 & 2 of outdoor type double door (KIOSK type ) complete with interconnections with suitable size of copper wiring, PVC insulated unarmoured cable and PVC sheath etc as required. The panel shall be made out of 3.15mm thick CRCA shett powder coated with angle frame of size 50x50x6mm cubical type including interconnection wiring, indicating lamps etc confirming to IP 42 specificatons including grounding of panel as per electrical standards, electrical connections shall be made by using proper thimbles/lugs, cable gland complete all as specified and as per directed byu Engineer-in-Charge.

Note:- (a) Ventilating fans of required size to dissipate the heat librated by capacitor units complete with automatic swicthing ON and OFF of fans depending upon the temeperature of panel, 230 V AC, 2650 RPM, 160 Cum/h, flying leads. Panel shall have silicon based fire/heat resistance coating. Fire retarding DMC/SMC filling for the opening around the busbar near to sectional barriors and door interlocking for all compartments - 01 lot. All accessories pre wired with suitable size copper conductor cable insulated with fiber glass insulation to with stand. (b) high temperature, housed in cubical panel (CPRI approved) made out of 3.15 mm thick MS sheet factory made duly powder coated front and rear door open able with locking arrangement complete with foundation as requires or recommended by manufecturer.

SUMMER APPLIANCE Supplying, installation, commissioning and testing of split type air conditioning unit indoor / outdoor complete with cordless remote control unit and with in built with BEE 3 star rating inverter type with CFC refrigerant 1.5 Ton capacity complete and comprising of the following :-

(a) Room evaporator indoor unit with speed blower fan of appropriate capacity including PCB, thermostatic control. air filter and drain for condensing water. (b) Outdoor condensing unit of capacity 4500 Kcal / Hr capacity with condensor fan motor of appropriate capacity - 01 No. air cooled condensor of capacity 1.5 TR - 01 No. shall be installed outside the building on and including suitable factory made mild steel brackets fixed on wall using fasteners for fixing and installing of ACs. (c) Refrigerant copper pipe of suction and discharge line with insulation, condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including complete wiring for evaporator & condensing unit with fixing of suitable size of copper cable, (d) Making good the disturbed surface to match with the existing surface after pluging the holes complete all as specified and directed. Note: The unit rate quoted by the contractor shall deem to be inclusive of :- (i) Cutting holes in walls / windows of any thickness for installation of AC, connection and making good the disturbed surface to match with the thickness for installation of AC etc, connection. (ii) Electric cable of size 4 sqmm copper conductor PVC sheathed and of required length to connect outdoor unit and outdoor unit to voltage stablizer. (iii) Copper piping with insulation and drain piping.

Supplying, installation, commissioning and testing of Refrigerator not less than 260 Ltrs capacity double door 230 volts, 50 Hz, AC supply, frost with humidity control & deodeiser BEE 5 star rating invert technology flat back and metal graphite printed decorative design finish with in built voltage stablizer complete all as specified and as directed.

S&F voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stablized at 230V with accuracy of ±2.5% and capacity 1 KVA.

S&F voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stablized at 230V with accuracy of ±2.5% and capacity 3 KVA.

S&F voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stablized at 230V with accuracy of ±2.5% and capacity 5 KVA.

S&F Desert cooler electric driven (single phase) having nominal air flow capacity of 4000 cum per hour (or nearest size) steel body including suitable size stand for mounting complete.

ROAD, PATH, & ROAD FURNITURE: M&L for WMM 150 mm thick (compacted thickness) in two layers conforming to grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanical means & rolled by using 8-10 ton vibrator power roller over compacted sub grade surface as specified in clause 406 3.5 of MORTH specification complete all as specified.

M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows tec. and the like n. exc. 15 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with 20% glass beds (intermixed) spread and laid by automatic mechanical machine engine at approximate temprature 160 dfegree celcius with special applicator machine as per manufacturers instruction complete all as specified and directed.

S&F solar cat eyes Alloy shell (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 60mm) of high efficeiency Mono-Crystafine solar panel 2.4 V / 0.3 Watt with one Ni-Mh or Nl-ed rechargeable battery (1.2V/ 1600MA) consisting of six super bright LEDs with 10000 to 18000 mcd complete as per manufectures instruction all as specified and as directed.

S&F Raised pavement marker ( Cat eye road stud) complying ASTM D- 4380 type H specifications, made of high strength engineering plastic body having at least 13635 kgs load bearing capacity in accordance with ASTM D 4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW/NH. 33023/10/97-DO.III & size of marker 9cm x 10cm x 1.6cm having shape so that no water penetration or dust accumulation takes place on reflective surface, fitted with electronically weded tough polycarbonate micro prismatic reflective panels having not less than 13 sqcms surface of each side having long distance visibility at night and wet weather condition. The slope or retro-reflectory surface shall be 35+5 degree to base. Each reflector shall have a cill not less than value specified in table 1 of MORTH circuler dated 11.06.97.

S&F Double legged informatory sign board having a size of 1200 mm x 1200 mm as double size fixed on single from and meeting back on the square pipe.(This is double sided board). The boards are of high intensity grade retro reflective sheeting.(AVERY DENNISION) of green/blue or any approved colour as per IRC Standards The board are made on Alco Bond sheet as required size. retro reflective sheeting ius fixed on the Alco bond sheets with suitable adhesive. The letter writing (as directed) is done with computerized cut machine and fixed on this Retro Reflective sheeting. This bond is mounted on MS frame and fixed on the frame with POP rivets For double sided board two such boards made of Alco bond sheets are fixed on the single frame with back to back. This are mounted with POP rivets. Note:- (i) Mild steel tubular frame shall be paid seperately under respective items. (ii) Fixing of board including all fixing arrangement deemed to be included in this item. (iii) Letter writing (size, Nos of letters etc, colour etc will be decided and directed at the execution stage. (iv) Rate shall deemed to include only one measurement for both side back to back.

ARBORICULTURE:- Surface excavation in any type of soil not exceeding 30 cm deeep and averaging upto 15 cm and removing upto a distance n exc 50 metre filling back/spreading with red earth of 15 cm thick mixed with farm yard treating the soil with pestisides (i.e. Bavitin and neam cake BHC 10% linson dust Thimment and Phorate, super and vermi compost in ratio (1:3) incl turfing/laying of (Bermuda grass ( Cynodon dactylon), Buffalo grass (Stenotaphrum secundatum) & Korean lawn grass (Zoysia japonica) ready made of approved quality turfs side by side without undulation/depressions and ramming the surface complete all as directed by Engineer-in-Charge.

Digging of pit n.exc 0.25 cum in any type of soil incl removal and filling back to pit with suitable growing media like red earth by treating with farm yard manure in the ratio (3:1) fertilizers and pesticides (i.e. Bevition and neem cake BHC 10% linson dust thimment or phorate super and vermi compost) and making up the trench area to proper level including supply and planting tree plants of species of height not less than 3 ft such as Neem (Azadirachta indica), Gulmohar (Delonix regia), Peepal tree (Ficus religiosa), Banyan (Ficus benghalensis), Pink Cassia (Cassia javanica) as approved by GE etc as directed by Engineer-in-Charge.

All as per item No. 66.00 hereinbefore but decorative plants such as Christmas tree (Araucaria heterophylla), Golden Cane Palm (Dypsis lutescenes), Royal Palm (roystonea regia), Foxtail Palm (Wodyetia bifurcata) & False Ashoka (Monoon longifolium) as directed by Engr-in-Charge.

Excavating in trenches in any type of soil upto 450 mm wide and not exceeding 450 mm depth and removing upto a distance n.exc 50 metre filling back with red earth of mixed with farm yard manure in the ratio (3:1) breaking the clads with wooden sludges 15 cm thick soil treating with fertilizers and pesticides (i.e. Bevitin and neem cake BHC 10% linson dust thimment or phorate super and vermi compost in ratio (1:3)), Planting of hedging and edging plants having 60 cm wide such as Conocarpus erectus. Ficus Blackiana, Ficus retusa & Duranta Erecta etc as approoved by GE.

Provn of M.S. Tree Guard 1.50 Mtres high above with MS wiremesh of size 78 x 37 mm and 2 mm dia of wire and MS angle iron 20 x 20 x 3 mm verticals (3 Nos) & MS flats 14 x 3 mm around the tree guard ( 3 Nos top, middle & bottom) equally spaced and embedded vertical angles in PCC 1:3:6 Type B-I including excavation in post holes and removal of excavated material to a n.exc 50 mtr and applying two coats of synthetic enamel paint including one coat of red oxide primer to tree guard and all as specified and directed.

Maintenance of planted trees and lawn area for two year after certified date of completion issued by GE, by employing one experienced mali per day. The maintenence shall includes the following:- (a) Periodical de-weeding of unwanted vegetation growth around the plants/lawn area. (b) Watering all the trees/plants/grass and soil with required for proper growth. (c) Periodical prunning the shrubs. (d) Periodical lawn moving (e) Treating the trees/plants grass and soil with required quantity of aproved manure, pesticides and fertilizer including necessary toping of red earth. (f) Replacement of dried/dead plants/grass/trees. (g) Hose pope to be arranged by the contractor. (h) Water shall be supplied by Deptt only for watering to plants.

M&L for cutting of existing CI/DI pipe line upto 150 mm dia and in section of new Tee in position for new water supply connection complete all as specified and directed.

M&L for run lead joint suitable for 150 mm dia CI fitting including of spun yarn and lead for CI spigot and socket pipe and fitting etc complete all as specified and directed.

PROVISIONAL LUMP SUM (PLS) Provide Provisional lump sum for (a) Construction of Parade ground complete all as specified and directed. NOTE FOR PLS : - 1) Provisional lump sum shall be expended wholly or in parts as directed by GE. The works under Provisional Lump Sum shall be measured and paid for at applicable rates in MES SSR 2020 Part-II subject to percentage ( + or - denomination) computed under last colummn of this schedule above/below the provisional lump sum price worked out by the MES. 2) For details refer relavent TD drawings.