Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC | ₹12.6 L | L1 | Accepted-AOC Lowest and Reasonable |
| 2 | L2₹13.5 L+₹90,348.50 (7.17%)Rejected-Finance | ₹13.5 L+₹90,348.50 (7.17%) | L2 | Rejected-Finance Not Lowest |
| 3 | L3₹13.7 L+₹1.1 L (8.88%)Rejected-Finance | ₹13.7 L+₹1.1 L (8.88%) | L3 | Rejected-Finance Not Lowest |
| 4 | L4₹14.0 L+₹1.4 L (11.5%)Rejected-Finance PLOT NO 44 SIDDARTH PARK BEHIND ICE FACTORY KODKI ROAD BHUJ PIN 370 001 | BHUJ | KACHCHH | GUJARAT | 370001 | ₹14.0 L+₹1.4 L (11.5%) | L4 | Rejected-Finance Not Lowest |
| 5 | L5₹15.3 L+₹2.8 L (21.9%)Rejected-Finance | ₹15.3 L+₹2.8 L (21.9%) | L5 | Rejected-Finance Not Lowest |
Tender Value
₹16.5 L
EMD Value
₹33,000
Closing Date
16 Apr 2020, 6:00 pmClosed
GE Army Bhuj
Garrison Engineer (Army) Bhuj Kutch 370 001
PROVN OF INFRASTRUCTURE FOR WASTE MANGEMENT FACILITY, WATER SUPPLY AND DRAINAGE UNDER GE ARMY BHUJ
2020_MES_328573_1
8671/E8
Open Tender
Civil Works
Item Rate
180 days
bhuj
as per tender
7 documents required · 7 mandatory
₹500
Yes
GE Army Bhuj
₹33,000
Yes
18 May 2020
26 Feb 2020
18 Apr 2020
26 Feb 2020
16 Apr 2020
10 Mar 2020
Amount
M & L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed exc 10cm in width and set and jointed in C M 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement including preparation of newly plastered sufaces of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed.
S & F for Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.
M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and direccted.
M & L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in sub base and finishing top surface even and fair complete all as specified and direccted.
S & F 60 mm thick, machine made, Ist quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles of triangular / zigzag / hexagonal / I in shape or shape and designe as approved with grey cement and pigment conforming to IS-15658-2006, M-35 grade laid over and including 25 mm thick sand cushioning and the voids shall also be filled with fine sand complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.
Supply and fixing unplastisized PVC pipe, 25mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed
Supply and fixing for unplastisized PVC pipe manufactured as per ASTM-D-1785 as per IS -559, Schedule- 40, 20mm dia (nominal), laid in trenches complete with fittings in required length complete all as specified and directed
Supply and fixing for unplastisized PVC pipe manufactured as per ASTM-D-1785 as per IS -559, Schedule- 40, 25mm dia (nominal), laid in trenches complete with fittings in required length complete all as specified and directed
S & F in repair unplastisized PVC ball valve with handle (stop valve) of size 20mm dia both and threated complete suitable for PVC pipe fitting with ASTM-1785, Schedule 40 complete all as specified and directed
S & F in repair unplastisized PVC ball valve with handle (stop valve) of size 25mm dia both and threated complete suitable for PVC pipe fitting with ASTM-1785, Schedule 40 complete all as specified and directed
M & L for cutting existing steel/PVC tubing 50/40mm dia for alternation or additions and insertion of new tee for branch connections etc complete all as specified and directed
M&L for Construction of brick masonry valve pits of size 750mm x 750 mm x 700 mm (internal dimension) one brick thick wall in CM (1:4) on 100mm thick PCC 1:4:8 type D-2 (40 mm graded aggregate) as in foundation, and 15mm thick rendering in Cement Mortar (1:4) internally, externally up to 15CM below GL, and providing valve pit cover made out of 3 mm thick MS sheet and welded and 25x25x6mm stiffeners welded to MS sheet alround and cross with 40 mm x 40 mm x 6 mm thick angle iron frame fixed on top of valve pit by means of MS flat iron 50x3mm bent to shape hold fast 150mm long embedded in PCC 1:2:4 type B-1(20mm graded aggregate), block of size 230mmx200mmx100mm and provision of hinges, 12mm dia MS Round Bar as handls and locking arrangement including two coats anti corrosive paint over a coat of red oxide zinc chrome primer and necessary excavation and earth work in soft/loose soil including removal of unserviceable materials from site of work complete all as specified and as directed.
M & L for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in sub base floor filling and finishing top surface even and fair complete all as specified and direccted.
M & L for forming fair finished drain or channel 40CM inner girth in cement concrete, using extra cement including forms using extra cement including forms, moulds, mitred stopped ends etc complete all as specified and direccted.
M & L for PCC 1:2:4 Type B-0, using 12.5mm graded crushed stone aggregate as in lintelts up to 1.5m clear span, cills, steps:, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in heights, copings, kneelers, apex stones, bed plates, kerbs not provided for in item, water throughs and the like including weathering, slightly rounded for chemfered angles and throating, as complete all as specified and directed.
Surface excavation n exc 30 cm deep and avaraging 15cm deep and getting out any type of soil complete all as directed.
Excavation in trenches in any type of soil not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out for taking out / laying of cables, erection of poles / strut / stays etc and not exceeding 10 sqm on plan complete all as specified and directed.
Returning, filling in the any type of soil including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.
Removing excavated material of any type of soil not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Material and labour for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I).
Supply & Laying un-reinforced precast concrete cable cover type-1 Class IV, size of 250 mm x 150 mm x 40 mm laid dry in trenches for under groung cable protection complete all as specifed and directed.
Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, earthed of size 50 sqmm, 3.5 core laid in trenches / poles / fixed to walls etc complete all as specified and directed. (Make : Havells India Ltd / KEI / Polycab / Finolex)
Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, earthed of size 10 sqmm, 4 core laid in trenches / poles / fixed to walls etc complete all as specified and directed. (Make : Havells India Ltd / KEI / Polycab / Finolex)
M & L for factory made precast machine pressed kerb stones of PCC grade M-15 design mix and of shape and size rected, set jointed and pointed cement and sand mortar 1:4 fixed in repairs with and including necessary excavation and earthwork and making good the disturbed surfaces to match with the existing surfaces including removal of dispodal of rubbish complete all as specified and directed. Sizes shall be as under :- Length (L) not less than 250mm, Height (H) 350mm, Thickness (T) 150mm and radius (R) 75mm.
M&L for point wiring for One light/fan/exhaust fan/buzzer point controlled by one,one way switch with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping/PVC Conduit of adequate size fixed on surface with PVC rawl plugs with and including Wooden Board/sunken type pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit/casing capping complete for one light/fan/exhaust fan point controlled by one; one way switch. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers
All as per item No. 27 here-in-before but One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.
All as per item No. 27 here-in-before but with using 4.00 Sqmm cable and 2.5sq mm earth cable PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.
S & F ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed. Make : Anchor/Havell's/Legrand
S & F switch piano flush button single pole230 / 250 volts one way 5 Amps Complete all as specified and directed. Make : Anchor/Havell's/Legrand
S & F socket outlet 5 pin 5 Amp, flush type complete all as specified and directed. Make : Anchor/Havell's/Legrand
S & F switch socket combination multi-purpose two in one, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed. Make : Anchor/Havell's/Legrand
S & F deluxe electronic ceiling fan regulator rotatry type, four step 120/240 Volt and connecting all as directed. Make : Anchor/Havell's/Legrand
S & F of elegantly industrial general purpose box type luminaire metal body, 1x18 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED tube 16 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and incl fixing arrangement of PVC square box for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed. Make :Confirming to Cat part No IGP 131 LT8-18 of crompton greaves or equivalent of Goldwyn/Wipro
Suppl installing and testing of energy efficient, 5 star rating, ceiling fan, white colour, of 1200 mm sweep and hanging to the hook on ceiling and making necessary connection from ceiling fan to the ceiling rose / porcelain connector with PVC insulated PVC sheathed FR grade 3 core 0.5 sqmm copper conductor flexible wire 1100 volts grade and writing MES Number on the fan in black paint complete all as specified and directed. Make :- Bajaj /Havell's / C G / C & S /Usha
Supply & fix for sheet metal enclosure powder painted for MCB DB SPN 8 way double door with IP-42 protection with Din rail and busbar Complete all as specified and directed. Make : Legrand/Havells/L & T/C&S
Supply & fix in repair MCB SP 230V 'C' series 6-32 Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.
Supply & fix in repair MCB SPN 230V 'C' series 6-40Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.
M & L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. (The Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe.)
M & L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip of 36mm X6mm as (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. (The Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe.) Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.
SARASWATI CONSTRUCTION
Sai Ram Electricals and Refrigeration Works
M/S S. SINGH TRADERS
Khodiyar Construction
ASHAPURA CONTRACTOR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .