Bearing, As per Plasser Part No: GPC63.21F/H67C, Make: Plasser

Special Eligibility Criteria

1. 1

   Bulk purchase will be made only from OEM i.e. M/s PLASSER INDIA PRIVATE LIMITED-FARIDABAD or their authorized representative with Tender Specific Authorization. Authorized dealers shall attach Tender Specific Authorization along with the offer, failing which the offer shall be summarily rejected. i. The offer of OEM/ Authorized Agent/Dealer/Distributor shall be considered. ii. In case the tenderer is the OEM itself, firm should clearly specify acceptable make offered. iii. In case the tenderer is authorized agent/dealer/distributor of the specified OEM, firm should upload the current authorization/dealership certificate issued by OEM. iv. In case the tenderer is not authorized agent/dealer/distributor of specified OEM and quotes for acceptable make, tenderer should attach (upload) Tender Specific Authorization letter/certificate issued by OEM. (v) In case the tenderer is Sub dealer of the specified OEM, firm should upload the copy authorization letter/attested certificate issued by authorized dealer regarding sub dealership and confirmation that authorized dealer will take the responsibility of genuineness and warranty of spare (of particular make, spare part description and part number) supplied by the sub-dealer to Indian Railways. And also, firm should provide copy of invoice of their dealer/distributor along with manufacturer test and warranty certificate as a proof of genuineness at the time of supply of material. Note: The prospective Tenderer s seeking developmental order can refer to Para 5.0 & 6.0 of Policy on Procurement of spares for Track Machines towards inclusion of their make in the list.

   Document requiredConfirmation required

Check List

1. 1

   Please go through Tender eligibility criteria before submission of offer.
2. 2

   Please go through Instructions to tenderers and General tender conditions of Tender before submission of offer. Having participated in the tender, it will be considered that you have gone through all the conditions and the same are accepted by you.
3. 3

   Please check that the offered description is exactly as per tendered description.
4. 4

   Have you ensured that while quoting the rates, you have clearly indicated the rate of applicable duties and taxes included in the prices quoted by you. Any variation in tax structure/rate due to introduction of GST, shall be dealt with under statutory Variation Clause.
5. 5

   Please check whether you have enclosed relevant document for MSEs to get benefit/preference under public procurement policy.

Commercial-Compliance

1. 1

   [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST /UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number.[e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher taxbill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC

   Document optionalConfirmation required
2. 2

   Firm agrees to pass on such additional set off / input tax credit as may become available in future under the GST provisions in respect of all the inputs used in the manufacture of the tendered item on the date of supply, by way of reduction in price and advise the purchaser accordingly.

   Document optionalConfirmation required
3. 3

   In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated delivery date irrespective of FOR/F.O.T condition mentioned elsewhere in the contract/tender.

   Confirmation required
4. 4

   EARNEST MONEY DEPOSIT (EMD) shall be deposited by all vendors for tenders with estimated value above Rs. 10 Lakhs subject to the applicable exemptions: (a) EMD shall normally not be called against Limited tenders with estimated value up to Rs. 25 lakhs (including single tenders, global limited tenders) and Open Tenders with estimated value upto Rs. 10 lakhs. If considered necessary, authority competent to issue tender may incorporate the condition to call for EMD even in such limited tenders, on a case to case basis. (b) MSEs irrespective of relevance of product category registered with the UDYAM (UDYAM Registration Certificate) will be exempted from payment of earnest money in terms of Rly Bd Lr. No. 2022/RS(G)/363/1 dated 21.09.2022. (c) Other Railways and Government departments in terms of Rly Bd Lr. No. 2004/RS(G)/779/11 dated 24.07.2007. (d) Indian Ordnance Factories in terms of Rly Bd. Lr. No. 92/RS(G)363/1 dated 08.04.1993. (e) PSUs owned by the Ministry of Railways and PSUs for the group of items that are manufactured by them in terms of Rly Bd. Lr. No. 2003/RS(G)779/5 dated 10.09.2004. (f) Vendors registered with South Central Railway for the trade group of the item tendered upto their monetary limit of registration. (g) Vendors appearing on the approved vendors list of RDSO/PUs/CORE (As available on IREPS/UVAM), subject to approval status being valid on the date of tender closing. (h) Vendors registered with Railway Board/SCR for supply of medicine, medical equipment and consumables shall be exempted from submission of EMD for these items. (i) In the tenders issued against PAC, EMD shall be mentioned in tenders as the EMD exemption is applicable for OEMs in whose favor PAC is issued but not to the authorized agent. KVIC shall be exempted from EMD for items supplied by them. Note: (i) There shall be no exemption to such bidders from submitting EMD and SD for all tenders published during the period of time they are disqualified as per declaration signed by them. (ii) If authorized agents participate on behalf of OEM/vendors appearing on the approved vendor list of RDSO/PUs/CORE, such authorized agents cant claim EMD exemption based on its own or its OEM/Approved vendors MSE certificate. (iii) OEMs are not exempted from payment of EMD where the OEM has participated in the tender and requests to place order on their authorized agent. (iv) Offers submitted without EMD will be summarily rejected.

   Document optionalConfirmation required
5. 5

   The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document.

   Document optionalConfirmation required
6. 6

   Firm willing to avail benefits of Micro and Small Enterprises, must submit documentary evidence of being Micro or Small Enterprises for tendered item in the certificate issued by nodal agencies as per Public Procurement Policy (i.e., UDYAM REGISTRATION CERTIFICATE), failing which firms offers will be treated as Non- MSE firm. For detailed instructions refer Para 15 of General Tender Conditions attached with NIT and/or available as Public Document on IREPS website Goods and Services/SCR. Failing which such benefit will not be extended to them.

   Document optionalConfirmation required
7. 7

   Offer should be kept valid for 90 days.
8. 8

   FOR Condition: In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated delivery date irrespective of FOR/F.O.T condition mentioned elsewhere in the contract/tender.

   Confirmation required
9. 9

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted. Validity will be reckoned from the closing date of tender.