Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.8 LAccepted-AOC | ₹29.8 L Quoted ₹30.5 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹32.6 L+₹2.2 L (7.15%)Rejected-Finance | ₹32.6 L+₹2.2 L (7.15%) | L2 | Rejected-Finance Being L2 |
| 3 | Rejected-Technical PLOT NO D 2 COAL DEPOT FOSBERY ROAD SEWRI E MUMBAI 400 015 | MUMBAI | MUMBAI | MAHARASHTRA | 400015 | - | - | Rejected-Technical Not meeting eligibility criteria |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
4 Jul 2020, 6:00 pmClosed
GE AF BARODA
GE AF BARODA PO MAKARPURA BARODA 390014
REPAIR/MAINTENANCE OF EXTERNAL WATER SUPPLY PIPE LINES, PUMP MOTORS AND OVERHEAD TANKS CLEANING AT DARJIPURA AF STN BARODA
2020_MES_350474_1
8551/E8
Open Tender
Miscellaneous Services
Item Rate
270 days
GE AF BARODA
AS PER NIT AND TENDER DOCUMENTS
3 documents required · 3 mandatory
₹500
GE AF BARODA
₹76,000
Yes
7 Sept 2020
6 Jun 2020
7 Jul 2020
6 Jun 2020
4 Jul 2020
21 Jun 2020
8 Jun 2020 - 12 Jun 2020
Amount
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying/taking out of cables,CI/GI pipe lines and getting out in sooft/loose soil complete all as specified and directed.
Returning, filling in trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cms each as in soil complete all as specified and directed.
Removal of excavated material to a distance not exceeding 50M and depositing where directed at a level not more than 1.5M above ground level complete all as specified and directed.
Taking out unserviceable CI/GI water main from trenches including fittings / fixtures like bend, Tee, Union, Elbow etc with flanged ends all as specified and as directed for ffollowing sie of pipes:- Note: Excavation and earthwork will be measured and paid separately under appropriate items.
200mm bore CI pipe
150 mm bore CI pipe
100 mm bore CI pipe
80mm bore CI pipe
80 mm bore GI pipe
50/40 mm bore GI pipe
25mm bore GI pipe
20mm bore GI pipe
Supply and laying Cast Iron pipes with spigot and socket ends centrifugally cast, class LA, confirming to IS-1536 of 2001 in any length laid in trenches or on supports including making alteration in existing /new pipe line for insertion of new pipe if necessary of following sizes all as specified and as directed.
200 mm bore size
150 mm bore size
100 mm bore size
80 mm bore size
Supply and fix accessories, CI specials confirming to IS 1538 (any type radius and angle) such as bends, tapers, straight, increasing / decreasing or double socket / flanged end collars, connecting pieces etc, as required at site for the folowing sizes all as specified and as directed.
upto 150mm bore
200mm bore
Note for item No 5 & 6 : Lead joints and jointing material shall be measured and paid separately under respective items.
Detection of leakage in main water line by necessary excavation in any type of soil, in any situation/depth including bailing out leakage water by suitable measures, repair to CI pipe of following sizes by burning & including lead,spunyarn etc as occuring at Site including cutting, threading for addition & alternation and for insertion of fittings all as required of following sizes:- Note:- (i) Rate quoted shall be deemed to be inclusive of necessary excavation/ filling making good the existing surfaces with the necessary T&P as required all as directed by the Engineer-in-Charge. (ii) CI specials shall be measured and paid separately under respective items.
200 mm bore
150 mm bore
100 mm bore
80 mm bore
Supply, laying & fixing delivery GI pipe of 50 mm bore for borewell heavy grade (ISI marked) with all fittings including taking out existing pipe from bore well etc complete all as specified and as directed.
Detection of leakage in water main by necessary excavation in any type of soil, in any situation including bailing out leakage water by suitable measures, repair to HDPE/PVC/PPR/GI pipes for the following sizes by cutting threading, for addition & alternation and for insertion of fittings/accessories all as required:- Note (i) The rate is deemed to including fittings/specials as required at site. (ii) Rate quoted shall be deemed to be inclusive of necessary excavation/ filling making good the existing surfaces with the necessary T&P as required all as directed by the Engineer-in-Charge.
20mm bore size
25mm bore size
40mm bore size
50mm bore size
65mm/80mm bore size
Supply & laying in trenches/ Walls GI pipe medium grade, ISI marked with necessary GI fitting such as tees,bend,elbows connecting to existing water main all as directed by the Engineer-in-Charge for the following sizes :-
20mm bore GI tubing.
25mm bore GI tubing.
40mm bore GI tubing.
50mm bore GI tubing.
80mm bore GI tubing.
Detection of leakage in main water line by necessary excavation in any type of soil, in any situation/depth including bailing out leakage water by suitable measures, repair to CI pipe of 200mm bore by burning & including lead, spunyarn etc as occuring at Site including cutting, threading for addition & alternation and for insertion of fittings all as required. (for Main Line from Jakatnaka)) Note:- (i) Rate quoted shall be deemed to be inclusive of necessary excavation in hard/dense soil to a depth exc 1.50m and n.exc 3.5m including necessary returning filling, removal of soil, draining of water if any and making good the existing surface all as directed by the Engineer-in-Charge.(for Main Line from Jakatnaka)
Dismantling / Taking down unserviceable Gun metal globe/gate valve and supply and fix new Gun metal globe / gate valve, screwed down high pressure with iron wheel head, screwed both ends for GI/PPR pipe including all fittings / fixtures like nipple, union etc complete for following sizes all as specified and as directed by the Engineer-in-Charge.
50 mm bore size
40 mm bore size
25 mm bore size
20 mm bore size
Supply & fix SS Spindle CI sluice valve 1.6PN, long body, confirming to IS- 14846 : 2000 including dismantling of existing sluice valve complete and testing all as specified and as directed by the Engineer-in-Charge of following sizes:-
200 mm bore sluice valve
150 mm bore sluice valve
100 mm bore sluice valve
80 mm bore sluice valve
Construction of brick masonry valve pit chamber of inner dimensions 900mmx900mmx1050mm suitable for valves up to 200 mm size, with PCC 1:4:8 type D-2 for foundation, brick work in CM 1:6, rendering in CM 1:4 15 mm thick mixed with water proofing compound, coping in PCC 1:2:4 type B1, including necessary earth work, form work and provision of MS sheet cover of thickness not less than 2.80 mm on 50 x 50 x 6.0 mm angle iron frame with locking arrangement, including painting over MS surfaces with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed by Engineer-in-charge.
Description all as per item No 14 above but for valve pit chamber of inner dimensions 450mmx450mmx600mm.
Supply and fix good quality PVC saddles including all necessary T & P such as heater for joint, threading etc all as directed by Engr-in-Charge including dismantling existing unserviceable/ broken PVC saddles for the following sizes:-
upto 25mm bore size
32 mm bore size
65 mm bore size
M&L rubber gasket joints (Tyton Joint) for CI pipe spigot and socketted pipes and fittings confirming to IS-12820-1989/IS5382-1985 , for following bores of pipes with and including rubber joints as suitable for pipe complete all as specified. (For new pipe length)
80 mm bore size
100 mm bore size
150 mm bore size
200 mm bore size
Supply and fix foot valve PP conforming to relevant IS complete of following sizes :- Make-Normax/Perth
80 mm bore size
100 mm bore size
M&L for painting the surface of each Pump- Motor set of any capacity with sluice valve complete with one coat of primer all as directed.
M&L for painting of CI/GI pipes at pump houses such as suction and delivery main with two coats of synthetic enamel paint as per MES colour code including preparation of surfaces by scrubbing down old existing paint complete all as specified and directed.
Cleaning of RCC under ground sump of following capacity after de-watering and cleaning scrapping with steel brushes/hessin clothes of the sump walls from inside including floor of the sump complete and repair to vent pipes including providing wire mesh and clamps complete all as directed by Engineer-in-Charge. Note: If work is not done upto satisfaction level of concerned JE/AGE (E/M) , the work will be redone upto the required level without any extra cost. Necessary tools and safety measures to be arranged by contractor.
15000 Gallon
20000 Gallon
100000 Gallon
M & L for cleaning of Overhead tank of following capacity by scratching and cleaning inside walls,pillars and floors with bleaching powder and clean water including taking out dirt, mud from storage tank including stag at site and removal to out side MD land and repair to vent pipes including providing wire mesh to cover all air gap holes and clamps complete all as directed by Engineer-in-Charge. Note: If work is not done upto satisfaction level of concerned JE/AGE (E/M) , the work will be redone upto the mark without any extra cost. Necessary tools and safety measures to be arranged by contractor.
35000 Gallon
50000 Gallon
75000 Gallon
20000 Gallon
Supply and fix Gland packing for sluice valve and pumps of size 6mm thick complete all as specified and directed.
M & L for mild steel framed work as in doors or gates of angle iron section of size 40X40X5mm or other section with gasket plates, rails, braces, etc of grade Fe-410W, E-250 quality A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete with locking arrangement all as directed.
M & L for Mild steel, plain, black sheet 2mm thick in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up and welding handle for lifting, mitred angles, etc. as required all as directed.
M & L for drilling and tapping cast iron/GI water mains (in position) for branch connections of the internal dia of following sizes all as directed.
20 mm bore size
40 mm bore size
50 mm bore size
M & L for rubber gasket joint for flanged type CI pipe lines with flange of following sizes :-
80 mm bore size
100 mm bore size
150 mm bore size
200 mm bore size
Supply and fix PPR pipes ISI marked of type PN16/SDR 11- 3 layer with fittings including taking down existing unserviceable pipes complete all as specified and directed by Engr-In-Charge.
20 mm bore size
25 mm bore size
40 mm bore size
50 mm bore size
Labour only for opening the cover plate of sluice valve of any size for cleaning inside to check blockage and refixing the same on existing position complete all as specified and directed.
Taking out or down steel tubing and connections,including cleaning the pipes and earth work for detection of blockage in existing pipe lines complete all as specified and as directed of the following sizes :-
50/40 mm bore size
25 mm bore size
20 mm bore size
Refixing old steel tubing (cleaned pipes obtained from item No 30.00 above) and connections in new or old position (Walls, ceiling, floors complete all as specified and as directed of the following sizes :-
50/40 mm bore size
25 mm bore size
20 mm bore size
Supply and laying UPVC pipe of pressure rating 10 Kgf/cm2 , 20 mm bore (ISI marked) including all fitting (ISI marked) laid in trenches/ fixed to wall/ fixed on pillars complete all as specified and as directed.
M&L for heavy grade UPVC pipe 200 mm bore of length 4 meter including flange in overhead tank complete all as specified and directed.
Taking out existing unservicable submersible pump set 3 HP electric driven from borewell any depth complete all as specified and directed. Note:- If submersible pump drops in borewell during taking out, contractor is responsible to take out the submersible pump by any arrangement at his own cost.
Supply and fix in repair of following parts for existing submerisble pump set electric driven 3 phase 415 volt 3 HP :-
Thrust bearing with thrust plate complete.
Top and bottom thrust bearing housing
Gun metal impellar with bush and neck rings, keys.
Pump shaft
Submersible cable multistranded copper conductor Flat of size 2.5 sqmm 3 core.
M & L for rewinding of borewell submersible motor of 3 HP with PVC insulated submersible rewinding wire of suitable gauge/size as existing incliding rotor balancing testing and connection of submersible cable and cable gland including taking down old winding wire complete all as specified and directed.
Taking out existing unservicable openwell submersible pump set up to 1 HP from water storage sump complete all as specified and directed.
M & L for rewinding of openwell submersible motor 1 HP with PVC insulated submersible rewinding wire of suitable gauge/size as existing including rotor balancing, testing and connection of submersible cable and cable gland including taking down old winding wire complete all as specified and directed.
M & L for rewinding of monoblock/ Centrifugal pump (Motor), 3 phase, 415 volt with supper emamelled copper rewinding wire of suitable size/gauge as existing and providing insulation varnishing, heating, testing including taking out the existing winding wire complete all as required for completion of JOB for following capacity pumps:-
Motor of capacity 50 HP
Motor of capacity 40 HP
Motor of capacity 25 HP
Motor of capacity 12.5 HP
Motor of capacity 7.5 HP
Supply and fix in repair following parts for existing centrifugal pump set electric driven 3 phase 415 volt 50/40 HP having discharge 400 LPM at 990 mtr head.
Motor bearing . Make : SKF/NBC/TATA/FAG/ UBC.
Motor cooling fan
Pump motor MS coupling
L-190 spider.
Cover bolts & washers
Pump bearing No. 6307 of Make : SKF/UBC/TATA/FAG/ NBC
CI impellar DB 80/20 for existing 50/40 HP centrifugal pump set.
CI Gland packing chaplla
SS Sleeve (Gland Sleeve)
Pump shaft with studs and nuts for pump body.
Starter relay of Make : Jyoti, Range 36-60
Magnet coil of Make Jyoti.
Starter copper contact set
Starter oil.
Starter base plate
Supply and fix in repair following parts for existing centrifugal pump set electric driven 3 phase 415 volt 25 HP.
Motor cooling fan
Pump motor MS coupling
L-190 spider.
Cover bolts & washers
Pump bearing Make : SKF/UBC/TATA/FAG/ NBC
Motor bearing of Make : SKF/UBC/TATA/FAG/ NBC
CI impellar suitable for existing pump set.
CI Gland packing chaplla
SS Sleeve (Gland Sleeve)
Pump shaft with studs and nuts for pump body.
Starter relay of Make : Jyoti, Range 36-60
Magnet coil of Make Jyoti.
Supply and fix in repair following parts for existing centrifugal pump set electric driven 3 phase 415 volt 12.5/7.5 HP
Motor cooling fan
Pump motor MS coupling
L-190 spider.
Cover bolts & washers
Pump bearing Make : SKF/UBC/TATA/FAG/ NBC
Motor bearing of Make : SKF/UBC/TATA/FAG/ NBC
CI impellar suitable for existing pump set.
CI Gland packing chaplla
SS Sleeve (Gland Sleeve)
Pump shaft with studs and nuts for pump body.
Supply and fix in repair star delta starter of following capacity all as specified and directed.
For 50/40 HP motor
For 25 HP motor
For 12/7.5 HP motor
Supply and fix in repair of submersible pump motor starter of 5 HP as suitable at site complete all as specified and directed.
M&L for oiling and greasing of pump motor parts (any make any size) by means of greasing gun or manually by unbolting and separating the pump motor set complete for smooth operation of machinery, making it leakage free and applying gland packing of necessary quantity and making working complete noise and leakage free all as directed. Note: (a) Rates for greese,lubricating oil and galnd packing deemed to included in quoted rates. (b) Pump motors measured under this item will be saperate and not to be included in any other item above.
Supply and fix CI/DI air valves with two air outlets, conforming to IS 14845 of size 200 mm dia and fixing up in CI/DI water supply mains including excavation complete all as specified and directed by Engr-In-Charge.
M&L in repair for glow sign board of 22 gauge sheet of size 2metre X 1 metre in good stencil cut including LED Light inside and with suitable angle Iron structure to be fixed on top of building/ground at AF Stn Darjipura,Harni Camp, Jakatnaka and Airfield with proper connection of electric supply complete all as specified and directed by Engr-In-Charge. Note: Name of subject in glow sign board to be as confirmed form AGE before ordering and will be as per the direction of Engr-in-Charge.
Supply and fix single phase preventor suitable for 3 phase motor of any make any size complete as per sample and all as specified and directed.
S&F in repair contactor 4 pole with AC coil 415 volt 50 Hz, 25 Amp for motor starter complete all as specified and directed.
S&F in repair overload and single phasing relay suitable for 15-25 Amp for motor starter panel 415 V, 50 Hz capacity complete all as directed by Engineer-in-Charge. Make- L&T or equivalent as approved.
S&F in repair sencer system of pressure booster pump of 1 HP including testing on ground complete all as specified and as directed.
Material & labour for boring of holes horizontally under road, pavement, hard standing for insertion of pipe of up to 200 mm bore, by trenchless technology using ultra sound technique and necessary machine complete all as specified and as directed. Note : Rate of necessary T & P are deemed to be included in quoted rate.
S&F in repair of aviation LED light fitting suitable for overhead tank with 1.5 sqmm 2 core cable 20 meter for connetion and nuts, bolts, clamps all as specified and directed.
Supply & provide Aquafit (Calcium hypo chlorite) 65% - 70% chlorine content (Calcium based granular desinfectant for water treatment plants much more stable than chlorine gas & stronger than bleaching powder and sodium hypo chlorite packed in 45 Kg drum complete as directed by Engineer-in-Charge. Make : Auafit & Equivalent.
Supply of water through tanker/bouser for domestic use including transportation from source to U/G sump Darjipura Afs Baroda. The water should have the following main factors :- (a)Water should be clear and from all suspended matters both Hyganic & inorganic matter. (b) Water should be free from taste and odour. (c) Water should be colour less and no vegetable stain should be present. (d) Water should be soft that it should not contain dissolved impurities like calcium or magnesium bicarbonate and Sulphates. (e) Water should be soft and should be free from all pathogenic organism causing diseases. (f) Copy of gate entry at guard room with vehicle No date and time shall be submitted duly defaced by Engr in charge before claiming payment. Note : Water analysis duly tested by authorised lab will be rendered by supplier before supplying the water.
MAA SHAKTI ENGG. CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .