SPECIAL REPAIR TO BLDG NO -588, PROVN OF LIGHTENING PROTECTION AND EARTHING BLDG NO P-1524 ALONGWITH MASTIC FLOORING AT AF STN GAS GODOWN AT AF STN BHUJ

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard & dense soil complete all as specified and as directed by the Engr-in-Charge.

Material & labour for hardcore of broken stone or boulders gauge exc 63 mm but n exc. 100 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed by the Engr-in-Charge.

Material & labour for 100 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in flooring ,finishing even and smouth wiyhout using extra cement complete all as specified and as directed by the Engr-in-Charge

Material & labour for step stone colored anti skid, bullnose finished, virified tilesmatt finished 10-12 mm thick (rectangular) polished, area of each tiles having size 300X1200mm in steps having self embossed threaded lines etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge

Material & labour for step stone colored anti skid, virified tiles matt finished 10-12 mm thick (rectangular) polished, area of each tiles having size 200X1200mm in steps riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge

Material & labour for step stone colored anti skid, Vitrified tiles matt finished 10-12 mm thick (rectangular) polished, area of each tiles exceeding 0.72 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade (double charged matt finish) complete all as specified and directed by Engineer-in-Charge (tiles shall be approved by Engineer-in-Charge)

Material & labour for Granite (of any type) tiles 18-20 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed by Engineer-in-Charge.

Material & labour for screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor /dado finishes in CM 1:6 complete all as specified and as directed by the Engr-in-Charge

Material & labour for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations complete all as specified and as directed by the Engr-in-Charge

Material & labour for precast cement concrete block masonry with solid blocks exc 10cm in width Type (1:5:8) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for 15 mm thick external plaster in CM(1:4) on fair face of brick work surface finished even & smooth without using extra cement with WPC complete all as specified and as directed by the Engr-in-Charge

Dismantling plain or corrugated steel sheeting,any gauge,thickness, including Nainital or similar pattern roof covering in any position including necessary steel double scaffolding complete all as specified and as directed by the Engr-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise providedl complete all as specified and as directed by the Engr-in-Charge

Supply & fix steel work in tubular trusses & post and similar works including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,etc for ornamental and insttricate design complete all as specified and as directed by Engr-in-Charge.

Supply & fix plates (plain ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,flat iron, etc with ornamental and intricate design complete all as specified and as directed by the Engr-in-Charge

Supply & fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour Manglore tiles pattern having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed by the Engr-in-Charge

Supply & fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering, fixed with self tapping screws using necessary scaffolding complete all as specified and as directed by the Engr-in-Charge

Material & labour for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repair solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing incl making grove for cables & taking down any electric wiring ,cables and refixing into same without any damage etc complete all as specified and as directed by the Engr-in-Charge

Supply & fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of wall fixing on to wall to make PVC frame complete all as specified and as directed by the Engr-in-Charge

Material & labour for in repairs for anodised aluminium snap grid frame work of size (605mm*605mm ) for false ceiling incl taking down any electric wiring, cables and refixing into same without any damage etc complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs for hangers 6mm dia. G.I. (upto 1200 mm length) size of grid (605mm*605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40*3 mm size 60 mm long and expansion hold fastners 12.50mm dia. 40mm long complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 10mm thick plaster of paris ceiling (gypsum anhydrous) to flat ,curved ,sunk and raised moulding surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh. (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed by the Engr-in-Charge

Material & labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engr-in-Charge

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.

Demolition of unreinforced concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) removing debris outside MOD land complete all as specified and as directed by the Engr-in-Charge

Demolition of cement concrete (unreinforced), concrete of any discription and in any position not otherwise specifically provided for floor, for roof padding etc complete all as specified and as directed by the Engr-in-Charge

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for complete all as specified and as directed by the Engr-in-Charge

Material & labour for separating, scraping and cleaning ofreinforcement (demolition of concrete measured separately) complete all as specified and as directed by the Engr-in-Charge

Dismantling of brick work or stone/boulder built in lime mortar or cement mortar including all quins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land complete all as specified and as directed by the Engr-in-Charge

Material & labour for 75mm thick PCC 1:4:8 type D2 using 40mm thick graded stone aggregate as sub base in floors complete all as specified and as directed by the Engr-in-Charge

Material & labour for 25mm thick PCC 1:2:4 type B-O using 12.5mm thick graded stone aggregate as in flooring complete all as specified and as directed by the Engr-in-Charge

Material & labour for PCC 1:4:8 type D-2 using 40mm graded stone agregate as in foundations,filling and mass complete all as specified and as directed by the Engr-in-Charge

Material & labour for RCC design Mix M-25 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by the Engr-in-Charge

Material & labour for RCC design Mix M-25 using 20mm graded stone aggregate as in columns , pillars , piers , posts & sruts complete all as specified and as directed by the Engr-in-Charge

Material & labour for RCC design Mix M-25 using 20mm graded stone aggregate as in lintel Band , Beams & Cantilevers complete all as specified and as directed by the Engr-in-Charge

Material & labour for RCC design Mix M-25 using 20mm graded stone aggregate as in chajja complete all as specified and as directed by the Engr-in-Charge

Material & labour for RCC design Mix M-25 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed by the Engr-in-Charge

Material & labour for RCC design Mix M-25 using 20mm graded stone aggregate as in parapet wall and downward facia complete all as specified and as directed by the Engr-in-Charge

Material & labour for formwork to sides of parapet & downward facia and cupboard etc for fair finished flat surface complete all as specified and as directed by the Engr-in-Charge

Material & labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter complete all as specified and as directed by the Engr-in-Charge

Material & labour for formwork to sides of columns , pillars , posts , struts etc for fair finished flat surface complete all as specified and as directed by the Engr-in-Charge

Material & labour for form work to edges of concrete flats, treads, breaks in floors window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified and as directed by the Engr-in-Charge

Material & labour for formwork to sides & bottom of chajja complete all as specified and as directed by the Engr-in-Charge

Material & labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed by the Engr-in-Charge

Material & labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of rough finished sur faces of concrete flat surface complete all as specified and as directed by the Engr-in-Charge.

Supply & fix TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

Treating the bottom and sides of excavation at the rate of 5 litres of emulsion chloropiryphos 20EC] per square metre of surface area complete all as specified and as directed by the Engr-in-Charge.

Treating the top surface of filled earth at the rate of 5 litres of emulsion chloropiryphos 20EC] per square metre of surface complete all as specified and as directed by the Engr-in-Charge

Treating the soil under plinth protection at the rate of 5 litres of emulsion chloropiryphos 20EC] per square metre of surface area complete all as specified and as directed by the Engr-in-Charge.(Tint of glass shall be approved by GE)

Material & labour for cutting out bricks, forming jambs ,toothing for and bondinng new into old work incl value of new materials entering old walls and jointing and pointing in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge

Material & labour for precast cement concrete block masonry with solid blocks exc 10cm in width Type (1:2:4) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for 10 mm thick internal plaster in CM (1:6) on other than fair face of brick work surface finish even & smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge

Material & labour for 5mm thick cement plaster in CM (1:3) Ceiling complete all as specified and as directed by the Engr-in-Charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engr-in-Charge

Material & labour for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed by the Engr-in-Charge

Material & labour for granite (of any type) tiles 18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in platform,Window cill etc complete all as specified and as directed by the Engr-in-Charge

Material & labour for virified ceramic tiles light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matches approved complete all as specified and as directed by the Engr-in-Charge

Material & labour for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles on vetical surface complete all as specified and as directed by the Engr-in-Charge

Material & labour for virified ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade (double charged matt finish) complete all as specified and as directed by the Engr-in-Charge (tiles shall be approved by Engineer-in-Charge)

Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and as directed by the Engr-in-Charge

Taking down chowkats / frame with shutters for window any type / aluminium etc ,Size exc1.20 sqm but n.exc 3 sqm each with shutters and refixing the same without any damage incl making good etc complete all as specified and as directed by the Engr-in-Charge

Material & labour for powder coated /anodised aluminum door window frames ,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc complete all as specified and as directed by the Engr-in-Charge

Supply & fix 100 mm extruded powder coated aluminium alloy handles fabricated type, anodised complete all as specified and as directed by the Engr-in-Charge

Supply & fix 100 mm butt hinges, extruded powder coated aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply only rubber gasket for fixing of glass complete all as specified and as directed by the Engr-in-Charge

Supply & fix aluminum alloy wire cloth , 0.45 mm nominal dia of wire and avg width of aperture 1.40mm and fixed with aluminum stapples complete all as specified and as directed by the Engr-in-Charge

Supply & fix 20 mm dia decorative drapary curtain road with bibs, braked & internal funnels complete all as specified and as directed by the Engr-in-Charge

Material & labour for 50mm thick PCC 1:3:6 C-0 using 12.5mm graded crushed stone aggregate as in roof padding over a coat of cement slurry incl water proofing compound complete all as specified and as directed by the Engr-in-Charge

Material & labour for 10 mm thick screed bedding in cement mortar 1: 3 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only) complete all as specified and as directed by the Engr-in-Charge

Material & labour for applying a priming coat of cold bitumen primer @ 0.30 ltr/sqm as per para 11.44.5 of MES SSR Part-I complete all as specified and as directed by the Engr-in-Charge

Material & labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface shall be laid by torch application method and the entire surface shall be finally painted with one coat of bituminious paint complete all as specified and as directed by the Engr-in-Charge

Supply only Integral waterproofing complete all as specified and as directed by the Engr-in-Charge

Material & labour for PCC 1:2:4 type B-1 using 20mm graded aggregate as in bed blocks, plinth courses, string courses , lacing courses or other structural section complete all as specified and as directed by the Engr-in-Charge

Material & labour for cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, sub base and mass concrete complete all as specified and as directed by the Engr-in-Charge

Supply & fix 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed by the Engr-in-Charge

Material & labour for 3mm thick wall care putty on wall incl preparation of surface complete all as specified and as directed by the Engr-in-Charge

Material & labour for preparing new plastered surfacesof wall, priming plastered and other surfaces with alkali resistant priming paint, and applying two coat of oil emulsion distemper complete all as specified and as directed by the Engr-in-Charge

Material & labour for 3mm thick one coat of wall care putty on new ceiling surfaces incl preparation complete all as specified and as directed by the Engr-in-Charge

Material & labour for preparation of new plastered surfaces on ceiling and applying two coats of oil Emulsion distemper over a coat of alkali resistant priming paint complete all as specified and as directed by the Engr-in-Charge

Material & labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by the Engr-in-Charge

Material & labour for preparing old plastered incl complete scraping of old paint surfaces of walls and applying two coats of oil bound distemper over 1.50 mm thick one coat of wall care putty incl preparation complete all as specified and as directed by the Engr-in-Charge

Material & labour for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying one coat of weather proof acrylic emultion paint over primer all as per manufacturers instructions and directed including scaffolding complete all as specified and as directed by the Engr-in-Charge

Material & labour for texture finish on wall of type 'ROYAL PLAY SPECIAL EFFECT MATALIC PAINT" as per manufacturers instruction and specified below :- (i) On plastered surface apply one coat cement base white wall care putty. (ii) Sanding the entire surface to receive primer and apply one coat of water thinable primer. (iii) Apply base in three coats with " ROYAL LUXURY EMULSION" (iv) Apply one coat play colour (top coat ) with ROYAL PLAY SPECIAL EFFECT MATALIC PAINT" and developing the desire texture effect as directed by GE using tools, like roller, spatula, sea sponge color wash sponge comb brush etc as pe manufacturers instruction. complete all as specified and as directed by the Engr-in-Charge

Material & labour for decorative multicolour wallpaper 0.50mm to 1mm thick and size of each roll (1000 cm X 45 cm) fixing on wall with adhesive and as per manufacturer instruction complete all as specified and as directed by the Engr-in-Charge

Taking down shutters only of any description exc 2 sqm each complete all as specified and as directed by the Engr-in-Charge

Supply & fixing 30 mm thick fiberglass reinforced plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and complete all as specified and as directed by the Engr-in-Charge

Supply & fix 150 mm size of door handle Extruded brass handles, fabricated type polished complete all as specified and as directed by the Engr-in-Charge

Supply & fix stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame complete all as specified and as directed by the Engr-in-Charge

Supply & fix brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed by the Engr-in-Charge

Supply & fix 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed by the Engr-in-Charge

Material & labour for 25 x 3mm FI holdfasts complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repair Brass 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and as directed by the Engr-in-Charge.

Material & labour for floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by the Engr-in-Charge

Supply & fix door closer hydraulically regulated, aluminium (excruded section) designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by the Engr-in-Charge.

Material & labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing will be painted to match with printed sheed complete all as specified and as directed by the Engr-in-Charge.

Supply & fix factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by the Engr-in-Charge

Supply & fix 1000 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position upto 10m height of slab all as specified in SSR Part I including dismantling water tank complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15 mm size bib cock (Straight line Model) with wall flange cromium plated complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15 mm size stop cock consealed type complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs hand shower (health faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15mm size 2-way bib cock with single handle and wall flange complete all as specified and as directed by the Engr-in-Charge

Supply & fix vitreous china white Table top wash basin in repairs having size 450mm x 400mm x 160 mm , Rectangle bowl, Snow White in colour , including making hole as per size into the granite cutting etc complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15 mm size brass chromium plated zig zag type connector (coupling) for connecting wall mixer and GI tubing complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC connections 15mm size with PTMT nuts of length 750mm complete all as specified and as directed by the Engr-in-Charge

Supply & fix liquid soap container of PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats complete all as specified and as directed by the Engr-in-Charge.

Supply & fix in repairs tubular towel rail, aluminium anodised 20mm dia D type 60 CM long between flanges complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by the Engr-in-Charge.

Supply & fix 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve complete all as specified and as directed by the Engr-in-Charge.

Supply & fix 15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms, including taking down old stop valve complete all as specified and as directed by the Engr-in-Charge

Material & labour in repairs 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete ,concealed fixed to walls / ceiling or laid to floors including taking up or down old tubing and connected fitting, fixture complete all as specified and as directed by the Engr-in-Charge

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing complete all as specified and as directed by the Engr-in-Charge

Re-fixing of 20 mm bore galvanized iron tubing medium grade retrieved from item No 132 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors complete all as specified and as directed by the Engr-in-Charge

Material and labour 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 32 mm size PVC waste pipe, length 1.20m for wash hand basin / urinal / sink complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 40 mm size PVC waste pipe length 1.20m for wash hand basin / urinal / sink complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 32 mm size PVC waste coupling of PTMT for wash hand basin / urinal / sink complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 40 mm size PVC waste coupling of PTMT for wash hand basin / urinal / sink complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc complete all as specified and as directed by the Engr-in-Charge

Supply & fix vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed by the Engr-in-Charge

Supply & fix polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, including taking down old water tank cover complete all as specified and as directed by the Engr-in-Charge

Supply & fix iin repairs 6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing ( size 300 mm x 300 mm )etc complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 6 mm thick rectangular glass self with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm )etc complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm to 100 mm dia pipe. complete all as specified and as directed by Engr-in-Charge

Material & labour for PCC 1:3:6 Type C2 (40 mm graded stone aggregate) in post, foundation, filling and mass concrete, plinth protection complete all as specified and as directed by Engr-in-Charge

Supply & fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with ruber ring joints fixed to wall complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC (SWR) bend 75mm bore any redious with access door complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC (SWR) 110mm bore branch piece, single (Single 'Y') equal or with acess door complete all as specified and as directed by the Engr-in-Charge.

Supply & fixin repairs PVC 110mm bore (SWR) coupler complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC (SWR) 110mm bore WC connector with lip type ring complete all as specified and as directed by the Engr-in-Charge.

Supply & fix PVC (SWR) 110mm bore in mm vent cowl complete all as specified and as directed by the Engr-in-Charge.

Supply & fix PVC (SWR) 75mm diameter out let in mm floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC (SWR) 75mm bore branch piece, single (Single 'Y') equal or with acess door complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC(SWR) 75mm bore in mm vent cowl complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC 160 mm bore rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs PVC 110 mm bore rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC (SWR) bends 160 mm bore any radius complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs PVC (SWR) bends 110mm bore any radius complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm complete all as specified and as directed by the Engr-in-Charge

Supply & fix grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and as directed by the Engr-in-Charge

Supply & fix grating doom grating doom 100 mm dia with waste hole of PTMT (Minimum weight 25 gms) complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC connections for 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC connections for 15mm size with PTMT nuts of length 900mm complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed by the Engr-in-Charge

Supply & fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by the Engr-in-Charge

Material & labour for fountain made of white Marble having size 3.00m diameter and water tank wall height 0.45m from base plate thickness of wall shall be 60mm thick , Base plate 3.50m dia and 40mm thick of Marble above 100mm thick PCC 1:2:4 & 4 Nos balusters (Bhaja) of size 0.40X0.40X.40m intricate design. Verticle member of fountain 2.80m tall having 0.90 Sqm, 0.80Sqm and 0.50 Sqm area 40mm thick of each flower shape art work of marble on verticle member of fountain incl sprinkler at top side of fountain , Art work ,design & pattern as per approved by GE ,water supply pipe 15mm dia GI 4m length and 20mm pipe GI 12m length incl laying under ground ,wall etc and 1HP motor / pump for water supply incl cable and conduit , lighting arrangement 4 Nos Laser light with consealed fitting & wiring water proof , all transportation and installation included complete all as specified and as directed by the Engr-in-Charge

Removing excavated soil to a distance exc. 1.50 Km but n.exc. 5 Km and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC 1:4:8 type D2 using 40mm stone aggregate in sub base,100 mm thick complete all as specified and as directed by the Engr-in-Charge

Material & labour for machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with mixture of grey cement and pigment (Make: Ultra Tiles or equivalent) complete all as specified and as directed by the Engr-in-Charge

Material & labour for sand filling under floors or in foundation including watering and consolidation,25 mm thick. complete all as specified and as directed by the Engr-in-Charge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by the Engr-in-Charge

Material & labour for preparation of concrete surfaces of Kerb stones and applying two coats of cement based paints over a coat of white wash complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement of exhaust fan,steel body AC single Phase. 230V of size 300mm sweep with, blades,frame and louver sweep with net frame including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan including copper wire up to ceiling rose complete all as specified and as directed by the Engr-in-Charge. Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply and fixing ceiling fans complete with blades, down rods, electronics regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-Charge.

Material & labour for sub main wiring surface/recessed with four runs of 4 Sqmm PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded single core, copper conductor drawn through and including suitable PVC Casing caping ISI marked with accessories and one run of equal size single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and as directed by the Engr-in-Charge. (Note: Four runs of conductor with one run of earth wire and PVC Casing Caping will be measured & paid as one unit)

Material & labour for talking down carefully copper/aluminium point wiring (light, fan,socket or power) complete including teak wood battens or from existing conduits with all fittings, such as switches, ceilling rose, pendants, sockets, lamp holder, fan regulators, brackets light fittings (except tube light fitting & ceiling fan) and removal of old material form site (except fitting to be reused) and making good disturbed surfaces of walls, floors ceilling etc complete all as specified and directed by Engineer-in-Charge to match with existing surfaces.

Material & labour for taking down sub main wiring any size of two single core aluminium/copper conductor cable PVC insulated alongwith/ without conduit and accessories and removing from site of work making good the disturbed surfaces of wall and floor / ceiling etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING/PVC CONDUIT INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed as earth wire continuity with metal/PVC surface/concealed box ccomplete all as specified and directed by Engineer-in-Charge for following :-

One light point controlled by one, one way switch single pole.

One Fan point controlled by one, one way switch single pole.

One 3 pin 5 Amp socket outlet on the same board .

One bell point controlled by one bell push on independent board.

One 3 pin 5 Amps socket out let on independent board

All as per item No 167 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board. complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular PVC surface/ flush box of module 1 flush ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular PVC surface/ flush box of module 3 flush ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular PVC surface/ flush box of module 6 flush ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular PVC surface/ flush box of module 8 flush ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular PVC surface/ flush box of module 12 flush ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular white cover plate with frame of module 1 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 3 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 6 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 8 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 12 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix modular blank plate module 1 complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular switch one way, 6 Amp, 1 module ISI Mark complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular switch one way , 16 Amp. ,1 module ISI Mark complete all as specified and as directed by the Engr-in-Charge.

Supply & fix modular socket 6 Amp, 2/3 pin, combined 2 module, ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix modular socket 6/16 Amp, 2/3 pin, combined, 2 Module. ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix in repalcement of modular step type electronic fan Regulator as reqd single pole 240 volts grade 120 Watt heavy duty ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply and fix in replacment of 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge for following :-

MCB TPN 40 To 100 Amp

MCB SP 5 To 32 Amp

MCB SPN 32 Amp

Supply & fix in replacement of double door sheet metal enclosures factory made DBs protection class IP-42, suitable for fixing of MCBs conforming to IS-13032, Isolators etc triple pole and neutral 4 way with 200 Amp rated bus bar 415V powder coated painted complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement of double door sheet metal enclosures factory made DBs protection class IP-42, suitable for fixing of MCBs conforming to IS-13032, Isolators etc single pole and newtral 4 way with 200 Amp rated bus bar 240v powder coated painted complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement of ceiling rose surface bakelite 65mm x 50mm three terminal complete all as specified and as directed by the Engr-in-Charge.

Supply & fix environmental friendly aesthetically designed, decorative recess mounted 5 W LED spot light of white/warm white colour with 2 Core copper wire from ceiling rose to light fitting complete all as specified and as directed by the Engr-in-Charge

Supply & fix K2 wall decorative light ,6 Watt,230 Volt ,Metal body,IP65 including connection wire upto ceiling rose complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light including fixing of suitable bracket made of 20/25 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and as directed by the Engr-in-Charge

Supply & fix ,connecting,testing and commissioning and jointing,LT under ground cable 1100 volts grade of size 10 Sqmm 4 Core ,XLPE insulated,armoured with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in trenches,ducts,fixed on poles/walls with proper size saddles and clamp laid under roads /path /drain /culverts or encased in GI pipe fixed & testing and commissioning complete all as specified and as directed by the Engineer-in-Charge of following Sizes:- Note:- (i) Sand cushioning, Cable protection cover, GI pipes, excavation and earth work shall be measured and paid for separately under respective items of Schedule "A"

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type soil for laying of cable /poles etc complete all as specified and as directed by the Engr-in-Charge

Supply, spreading and filling of clean river sand spreading leveling in layers not exceeding 18 cm thick as cushioning to cable complete all as specified and as directed by the Engr-in-Charge (NOTE : Punned thickness of dry sand will be measured and paid)

Supply & laying unreinforced precast concrete cable cover,class LV type 1 with flat size 250 mm x 180mm x 40mm complete all as specified and as directed by the Engr-in-Charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including galvanised earth lead wire 4.0 mm dia by means of nuts bolts checknuts and washers of galvanised iron including 15 mm bore GI pipe, medium grade upto 7.50 mtr long all as shown in electrical plate No. 3, SSR PART-I, and testing on completion including earth work and excavation in any type of soil/rock, PCC 1:3:6 type C1, earthing chamber, precast RCC slab 50mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire febric or XPM [Weight hot less than 4 Kg/Sqm], with cast iron frame funnel with wire mesh, GI watering pipe of 20mm bore, medium grade test point and lugs complete all as specified and as directed by the Engr-in-Charge. (Note: (i) Item includes cost of 7.5 mtr length of GI pipe and earth lead for protection of earth lead ,any variation in length shell be adjusted through deviation order (ii) on testing if earth resistance less than specified not obtained earthing will be regenerated at no extra cost till the desired earth resistance is obtained)

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4.0 Sqmm single core, copper conductor drawn through Steel Conduit and 4.0 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed(Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit) complete all as specified and as directed by the Engr-in-Charge

Supply & fix LED flood light 100Watt, IP66 electronic LED driver with APFC, IK 07 exclusive die-cast aluminium body with toughened glass visor,Mirror Polished alluminium reflector, acrylic or polycarbonate diffuser open circuit protection, over voltage protection, Surge voltage protection upto 10 kv with built in SPD, lumen LED>140 lm/Watt viewing angle 120 degree suitable for highlightening architectural fixed with suitable GI clamps having two coat of enamal paint, Nut Bolts, complete all as specified and as directed by the Engr-in-Charge. Note : Contractor will arrange T&P and veh required for repairing lights and the cost for the same will be incl in the quoted rate

Supply & fix in replacement of automatic / manual with inbuilt time delay transfer Switch of capacity 100 Amps four pole (with Enclosure) with connections of Auto / Manual Transfer Switch including Testing complete all as specified and as directed by the Engr-in-Charge.

Supply & fix galvanised plain steel box of size 0.736x0.889x0.2794 mtr fabricated by using 1.6mm thick Galvanised plain steel sheet IS 277-2003, Class 2 zinc coated,2x IS 808(part-III)-1989 medium channel of 100 size welded horizontally to fix 100 Amp ATS and TPN DB 8 way on the channel including making holes and using nut,bolt hinges locking arrangement including single coat of red oxide primer and two coat of synthetic enamel White paint complete all as specified and as directed by the Engr-in-Charge.. Note- Charges for removing of old box will be included in quoted rate

Supply & fix air termination single pointed solid copper rod 12mm dia, 300mm long mounted on GI pipe 40mm bore light grade embedded in mass PCC complete all as specified and directed by Engineer-in-Charge. (Note :G I Pipe & PCC shall be measured and paid separately.)

Supply & fix test point terminal block made of gun metal / phosphorus bronze/copper of size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw complete all as specified and directed by Engineer-in-Charge.

Material & labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required copper strip 20x3.00 mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium strip 25 x 3.15 mm with saddles and fixing screws etc for roof/down conductor above ground including joining with rivets, bolts, nuts, washers etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for chemical earthing complete with copper earth plate electrode 90cmx60cm x 3.15 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including Copper strip of 32x6mm as earth lead up to 7.5 mtr long fixed by means of bolts, nuts, check nuts and washers etc. of galvanised iron or steel including provn of GI protection pipe light grade of 32/40mm bore and connected to earth strip earthing test point all as shown in electrical plate No.5 of SSR Part-I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (reinforced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 15mm bore medium grade, wire mesh and lugs, test point including salt, Coal & Magnesium sulphate etc complete all as specified and directed by Engineer-in-Charge. Note: Copper strip exceeding 7.5m long shall be measured & paid separately.The earth resistance value less than 1 ohm.Failing to achieve the value the contractor shall be re do the earthing without any extra cost.

Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6.3 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including GI strip of 32x6mm as earth lead up to 7.5 mtr long fixed by means of bolts, nuts, check nuts and washers etc. of galvanised iron or steel including provn of HDPE/GI protection pipe light grade of 32/40mm bore and connected to earth strip earthing test point all as shown in electrical plate No.5 of SSR Part-I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (reinforced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 15mm bore , wire mesh and lugs, test point etc complete all as specified and directed by Engineer-in-Charge. Note: G I strip exceeding 7.5m long shall be measured & paid seperately.

Material & labour for preparing surfaces by brushing with wire brushes for removing caked mud etc. swe eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engineer-in-Charge.

Cleaning the surface with wire brush and remove all dust particles, material & labour applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm, on primer surfaces mastic work with bitumen and aggregates mixing in pan and both mixing materials heating up to 150 degrees temperature & make hot mastic mortar and hit mortar flow on existing floors with level after sprinkling powder on mastic surfaces paving bitumenous premixed carpet 20 mm thick consolidated thickness with 0.27 cum of stone chippings mixed with 14.60 kg of binder complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of old or previously untreated concrete internal surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of old or previously untreated concrete ceiling surfaces and applying one coats of white wash complete all as specified and directed by Engineer-in-Charge.

SHREE BHANU ENTERPRISE (BID ID -3258028)